1 /* $FreeBSD$ */ 2 /*- 3 * Copyright (c) 1997-2009 by Matthew Jacob 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND 17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 19 * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE 20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 * 28 */ 29 /* 30 * Soft Definitions for for Qlogic ISP SCSI adapters. 31 */ 32 33 #ifndef _ISPVAR_H 34 #define _ISPVAR_H 35 36 #if defined(__NetBSD__) || defined(__OpenBSD__) 37 #include <dev/ic/isp_stds.h> 38 #include <dev/ic/ispmbox.h> 39 #endif 40 #ifdef __FreeBSD__ 41 #include <dev/isp/isp_stds.h> 42 #include <dev/isp/ispmbox.h> 43 #endif 44 #ifdef __linux__ 45 #include "isp_stds.h" 46 #include "ispmbox.h" 47 #endif 48 #ifdef __svr4__ 49 #include "isp_stds.h" 50 #include "ispmbox.h" 51 #endif 52 53 #define ISP_CORE_VERSION_MAJOR 7 54 #define ISP_CORE_VERSION_MINOR 0 55 56 /* 57 * Vector for bus specific code to provide specific services. 58 */ 59 typedef struct ispsoftc ispsoftc_t; 60 struct ispmdvec { 61 void (*dv_run_isr) (ispsoftc_t *); 62 uint32_t (*dv_rd_reg) (ispsoftc_t *, int); 63 void (*dv_wr_reg) (ispsoftc_t *, int, uint32_t); 64 int (*dv_mbxdma) (ispsoftc_t *); 65 int (*dv_dmaset) (ispsoftc_t *, XS_T *, void *); 66 void (*dv_dmaclr) (ispsoftc_t *, XS_T *, uint32_t); 67 int (*dv_irqsetup) (ispsoftc_t *); 68 void (*dv_dregs) (ispsoftc_t *, const char *); 69 const void * dv_ispfw; /* ptr to f/w */ 70 uint16_t dv_conf1; 71 uint16_t dv_clock; /* clock frequency */ 72 }; 73 74 /* 75 * Overall parameters 76 */ 77 #define MAX_TARGETS 16 78 #ifndef MAX_FC_TARG 79 #define MAX_FC_TARG 1024 80 #endif 81 #define ISP_MAX_TARGETS(isp) (IS_FC(isp)? MAX_FC_TARG : MAX_TARGETS) 82 #define ISP_MAX_LUNS(isp) (isp)->isp_maxluns 83 84 /* 85 * Macros to access ISP registers through bus specific layers- 86 * mostly wrappers to vector through the mdvec structure. 87 */ 88 #define ISP_RUN_ISR(isp) \ 89 (*(isp)->isp_mdvec->dv_run_isr)(isp) 90 91 #define ISP_READ(isp, reg) \ 92 (*(isp)->isp_mdvec->dv_rd_reg)((isp), (reg)) 93 94 #define ISP_WRITE(isp, reg, val) \ 95 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), (val)) 96 97 #define ISP_MBOXDMASETUP(isp) \ 98 (*(isp)->isp_mdvec->dv_mbxdma)((isp)) 99 100 #define ISP_DMASETUP(isp, xs, req) \ 101 (*(isp)->isp_mdvec->dv_dmaset)((isp), (xs), (req)) 102 103 #define ISP_DMAFREE(isp, xs, hndl) \ 104 if ((isp)->isp_mdvec->dv_dmaclr) \ 105 (*(isp)->isp_mdvec->dv_dmaclr)((isp), (xs), (hndl)) 106 107 #define ISP_IRQSETUP(isp) \ 108 (((isp)->isp_mdvec->dv_irqsetup) ? (*(isp)->isp_mdvec->dv_irqsetup)(isp) : 0) 109 #define ISP_DUMPREGS(isp, m) \ 110 if ((isp)->isp_mdvec->dv_dregs) (*(isp)->isp_mdvec->dv_dregs)((isp),(m)) 111 112 #define ISP_SETBITS(isp, reg, val) \ 113 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) | (val)) 114 115 #define ISP_CLRBITS(isp, reg, val) \ 116 (*(isp)->isp_mdvec->dv_wr_reg)((isp), (reg), ISP_READ((isp), (reg)) & ~(val)) 117 118 /* 119 * The MEMORYBARRIER macro is defined per platform (to provide synchronization 120 * on Request and Response Queues, Scratch DMA areas, and Registers) 121 * 122 * Defined Memory Barrier Synchronization Types 123 */ 124 #define SYNC_REQUEST 0 /* request queue synchronization */ 125 #define SYNC_RESULT 1 /* result queue synchronization */ 126 #define SYNC_SFORDEV 2 /* scratch, sync for ISP */ 127 #define SYNC_SFORCPU 3 /* scratch, sync for CPU */ 128 #define SYNC_REG 4 /* for registers */ 129 #define SYNC_ATIOQ 5 /* atio result queue (24xx) */ 130 #define SYNC_IFORDEV 6 /* synchrounous IOCB, sync for ISP */ 131 #define SYNC_IFORCPU 7 /* synchrounous IOCB, sync for CPU */ 132 133 /* 134 * Request/Response Queue defines and macros. 135 * The maximum is defined per platform (and can be based on board type). 136 */ 137 /* This is the size of a queue entry (request and response) */ 138 #define QENTRY_LEN 64 139 /* Both request and result queue length must be a power of two */ 140 #define RQUEST_QUEUE_LEN(x) MAXISPREQUEST(x) 141 #ifdef ISP_TARGET_MODE 142 #define RESULT_QUEUE_LEN(x) MAXISPREQUEST(x) 143 #else 144 #define RESULT_QUEUE_LEN(x) \ 145 (((MAXISPREQUEST(x) >> 2) < 64)? 64 : MAXISPREQUEST(x) >> 2) 146 #endif 147 #define ISP_QUEUE_ENTRY(q, idx) (((uint8_t *)q) + ((idx) * QENTRY_LEN)) 148 #define ISP_QUEUE_SIZE(n) ((n) * QENTRY_LEN) 149 #define ISP_NXT_QENTRY(idx, qlen) (((idx) + 1) & ((qlen)-1)) 150 #define ISP_QFREE(in, out, qlen) \ 151 ((in == out)? (qlen - 1) : ((in > out)? \ 152 ((qlen - 1) - (in - out)) : (out - in - 1))) 153 #define ISP_QAVAIL(isp) \ 154 ISP_QFREE(isp->isp_reqidx, isp->isp_reqodx, RQUEST_QUEUE_LEN(isp)) 155 156 #define ISP_ADD_REQUEST(isp, nxti) \ 157 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 158 ISP_WRITE(isp, isp->isp_rqstinrp, nxti); \ 159 isp->isp_reqidx = nxti 160 161 #define ISP_SYNC_REQUEST(isp) \ 162 MEMORYBARRIER(isp, SYNC_REQUEST, isp->isp_reqidx, QENTRY_LEN, -1); \ 163 isp->isp_reqidx = ISP_NXT_QENTRY(isp->isp_reqidx, RQUEST_QUEUE_LEN(isp)); \ 164 ISP_WRITE(isp, isp->isp_rqstinrp, isp->isp_reqidx) 165 166 /* 167 * SCSI Specific Host Adapter Parameters- per bus, per target 168 */ 169 typedef struct { 170 uint32_t : 8, 171 update : 1, 172 sendmarker : 1, 173 isp_req_ack_active_neg : 1, 174 isp_data_line_active_neg: 1, 175 isp_cmd_dma_burst_enable: 1, 176 isp_data_dma_burst_enabl: 1, 177 isp_fifo_threshold : 3, 178 isp_ptisp : 1, 179 isp_ultramode : 1, 180 isp_diffmode : 1, 181 isp_lvdmode : 1, 182 isp_fast_mttr : 1, /* fast sram */ 183 isp_initiator_id : 4, 184 isp_async_data_setup : 4; 185 uint16_t isp_selection_timeout; 186 uint16_t isp_max_queue_depth; 187 uint8_t isp_tag_aging; 188 uint8_t isp_bus_reset_delay; 189 uint8_t isp_retry_count; 190 uint8_t isp_retry_delay; 191 struct { 192 uint32_t 193 exc_throttle : 8, 194 : 1, 195 dev_enable : 1, /* ignored */ 196 dev_update : 1, 197 dev_refresh : 1, 198 actv_offset : 4, 199 goal_offset : 4, 200 nvrm_offset : 4; 201 uint8_t actv_period; /* current sync period */ 202 uint8_t goal_period; /* goal sync period */ 203 uint8_t nvrm_period; /* nvram sync period */ 204 uint16_t actv_flags; /* current device flags */ 205 uint16_t goal_flags; /* goal device flags */ 206 uint16_t nvrm_flags; /* nvram device flags */ 207 } isp_devparam[MAX_TARGETS]; 208 } sdparam; 209 210 /* 211 * Device Flags 212 */ 213 #define DPARM_DISC 0x8000 214 #define DPARM_PARITY 0x4000 215 #define DPARM_WIDE 0x2000 216 #define DPARM_SYNC 0x1000 217 #define DPARM_TQING 0x0800 218 #define DPARM_ARQ 0x0400 219 #define DPARM_QFRZ 0x0200 220 #define DPARM_RENEG 0x0100 221 #define DPARM_NARROW 0x0080 222 #define DPARM_ASYNC 0x0040 223 #define DPARM_PPR 0x0020 224 #define DPARM_DEFAULT (0xFF00 & ~DPARM_QFRZ) 225 #define DPARM_SAFE_DFLT (DPARM_DEFAULT & ~(DPARM_WIDE|DPARM_SYNC|DPARM_TQING)) 226 227 /* technically, not really correct, as they need to be rated based upon clock */ 228 #define ISP_80M_SYNCPARMS 0x0c09 229 #define ISP_40M_SYNCPARMS 0x0c0a 230 #define ISP_20M_SYNCPARMS 0x0c0c 231 #define ISP_20M_SYNCPARMS_1040 0x080c 232 #define ISP_10M_SYNCPARMS 0x0c19 233 #define ISP_08M_SYNCPARMS 0x0c25 234 #define ISP_05M_SYNCPARMS 0x0c32 235 #define ISP_04M_SYNCPARMS 0x0c41 236 237 /* 238 * Fibre Channel Specifics 239 */ 240 /* These are for non-2K Login Firmware cards */ 241 #define FL_ID 0x7e /* FL_Port Special ID */ 242 #define SNS_ID 0x80 /* SNS Server Special ID */ 243 #define NPH_MAX 0xfe 244 245 /* These are for 2K Login Firmware cards */ 246 #define NPH_RESERVED 0x7F0 /* begin of reserved N-port handles */ 247 #define NPH_MGT_ID 0x7FA /* Management Server Special ID */ 248 #define NPH_SNS_ID 0x7FC /* SNS Server Special ID */ 249 #define NPH_FABRIC_CTLR 0x7FD /* Fabric Controller (0xFFFFFD) */ 250 #define NPH_FL_ID 0x7FE /* F Port Special ID (0xFFFFFE) */ 251 #define NPH_IP_BCST 0x7FF /* IP Broadcast Special ID (0xFFFFFF) */ 252 #define NPH_MAX_2K 0x800 253 254 /* 255 * "Unassigned" handle to be used internally 256 */ 257 #define NIL_HANDLE 0xffff 258 259 /* 260 * Limit for devices on an arbitrated loop. 261 */ 262 #define LOCAL_LOOP_LIM 126 263 264 /* 265 * Limit for (2K login) N-port handle amounts 266 */ 267 #define MAX_NPORT_HANDLE 2048 268 269 /* 270 * Special Constants 271 */ 272 #define INI_NONE ((uint64_t) 0) 273 #define ISP_NOCHAN 0xff 274 275 /* 276 * Special Port IDs 277 */ 278 #define MANAGEMENT_PORT_ID 0xFFFFFA 279 #define SNS_PORT_ID 0xFFFFFC 280 #define FABRIC_PORT_ID 0xFFFFFE 281 #define PORT_ANY 0xFFFFFF 282 #define PORT_NONE 0 283 #define VALID_PORT(port) (port != PORT_NONE && port != PORT_ANY) 284 #define DOMAIN_CONTROLLER_BASE 0xFFFC00 285 #define DOMAIN_CONTROLLER_END 0xFFFCFF 286 287 /* 288 * Command Handles 289 * 290 * Most QLogic initiator or target have 32 bit handles associated with them. 291 * We want to have a quick way to index back and forth between a local SCSI 292 * command context and what the firmware is passing back to us. We also 293 * want to avoid working on stale information. This structure handles both 294 * at the expense of some local memory. 295 * 296 * The handle is architected thusly: 297 * 298 * 0 means "free handle" 299 * bits 0..12 index commands 300 * bits 13..15 bits index usage 301 * bits 16..31 contain a rolling sequence 302 * 303 * 304 */ 305 typedef struct { 306 void * cmd; /* associated command context */ 307 uint32_t handle; /* handle associated with this command */ 308 } isp_hdl_t; 309 #define ISP_HANDLE_FREE 0x00000000 310 #define ISP_HANDLE_CMD_MASK 0x00001fff 311 #define ISP_HANDLE_USAGE_MASK 0x0000e000 312 #define ISP_HANDLE_USAGE_SHIFT 13 313 #define ISP_H2HT(hdl) ((hdl & ISP_HANDLE_USAGE_MASK) >> ISP_HANDLE_USAGE_SHIFT) 314 # define ISP_HANDLE_NONE 0 315 # define ISP_HANDLE_INITIATOR 1 316 # define ISP_HANDLE_TARGET 2 317 # define ISP_HANDLE_CTRL 3 318 #define ISP_HANDLE_SEQ_MASK 0xffff0000 319 #define ISP_HANDLE_SEQ_SHIFT 16 320 #define ISP_H2SEQ(hdl) ((hdl & ISP_HANDLE_SEQ_MASK) >> ISP_HANDLE_SEQ_SHIFT) 321 #define ISP_VALID_HANDLE(c, hdl) \ 322 ((ISP_H2HT(hdl) == ISP_HANDLE_INITIATOR || \ 323 ISP_H2HT(hdl) == ISP_HANDLE_TARGET || \ 324 ISP_H2HT(hdl) == ISP_HANDLE_CTRL) && \ 325 ((hdl) & ISP_HANDLE_CMD_MASK) < (c)->isp_maxcmds && \ 326 (hdl) == ((c)->isp_xflist[(hdl) & ISP_HANDLE_CMD_MASK].handle)) 327 #define ISP_BAD_HANDLE_INDEX 0xffffffff 328 329 330 /* 331 * FC Port Database entry. 332 * 333 * It has a handle that the f/w uses to address commands to a device. 334 * This handle's value may be assigned by the firmware (e.g., for local loop 335 * devices) or by the driver (e.g., for fabric devices). 336 * 337 * It has a state. If the state if VALID, that means that we've logged into 338 * the device. 339 * 340 * Local loop devices the firmware automatically performs PLOGI on for us 341 * (which is why that handle is imposed upon us). Fabric devices we assign 342 * a handle to and perform the PLOGI on. 343 * 344 * When a PORT DATABASE CHANGED asynchronous event occurs, we mark all VALID 345 * entries as PROBATIONAL. This allows us, if policy says to, just keep track 346 * of devices whose handles change but are otherwise the same device (and 347 * thus keep 'target' constant). 348 * 349 * In any case, we search all possible local loop handles. For each one that 350 * has a port database entity returned, we search for any PROBATIONAL entry 351 * that matches it and update as appropriate. Otherwise, as a new entry, we 352 * find room for it in the Port Database. We *try* and use the handle as the 353 * index to put it into the Database, but that's just an optimization. We mark 354 * the entry VALID and make sure that the target index is updated and correct. 355 * 356 * When we get done searching the local loop, we then search similarly for 357 * a list of devices we've gotten from the fabric name controller (if we're 358 * on a fabric). VALID marking is also done similarly. 359 * 360 * When all of this is done, we can march through the database and clean up 361 * any entry that is still PROBATIONAL (these represent devices which have 362 * departed). Then we're done and can resume normal operations. 363 * 364 * Negative invariants that we try and test for are: 365 * 366 * + There can never be two non-NIL entries with the same { Port, Node } WWN 367 * duples. 368 * 369 * + There can never be two non-NIL entries with the same handle. 370 */ 371 typedef struct { 372 /* 373 * This is the handle that the firmware needs in order for us to 374 * send commands to the device. For pre-24XX cards, this would be 375 * the 'loopid'. 376 */ 377 uint16_t handle; 378 379 /* 380 * PRLI word 3 parameters contains role as well as other things. 381 * 382 * The state is the current state of this entry. 383 * 384 * The is_target is the current state of target on this port. 385 * 386 * The is_initiator is the current state of initiator on this port. 387 * 388 * Portid is obvious, as are node && port WWNs. The new_role and 389 * new_portid is for when we are pending a change. 390 */ 391 uint16_t prli_word3; /* PRLI parameters */ 392 uint16_t new_prli_word3; /* Incoming new PRLI parameters */ 393 uint16_t : 12, 394 probational : 1, 395 state : 3; 396 uint32_t : 6, 397 is_target : 1, 398 is_initiator : 1, 399 portid : 24; 400 uint32_t 401 : 8, 402 new_portid : 24; 403 uint64_t node_wwn; 404 uint64_t port_wwn; 405 uint32_t gone_timer; 406 } fcportdb_t; 407 408 #define FC_PORTDB_STATE_NIL 0 /* Empty DB slot */ 409 #define FC_PORTDB_STATE_DEAD 1 /* Was valid, but no more. */ 410 #define FC_PORTDB_STATE_CHANGED 2 /* Was valid, but changed. */ 411 #define FC_PORTDB_STATE_NEW 3 /* Logged in, not announced. */ 412 #define FC_PORTDB_STATE_ZOMBIE 4 /* Invalid, but announced. */ 413 #define FC_PORTDB_STATE_VALID 5 /* Valid */ 414 415 #define FC_PORTDB_TGT(isp, bus, pdb) (int)(lp - FCPARAM(isp, bus)->portdb) 416 417 /* 418 * FC card specific information 419 * 420 * This structure is replicated across multiple channels for multi-id 421 * capapble chipsets, with some entities different on a per-channel basis. 422 */ 423 424 typedef struct { 425 int isp_gbspeed; /* Connection speed */ 426 int isp_linkstate; /* Link state */ 427 int isp_fwstate; /* ISP F/W state */ 428 int isp_loopstate; /* Loop State */ 429 int isp_topo; /* Connection Type */ 430 431 uint32_t : 4, 432 fctape_enabled : 1, 433 sendmarker : 1, 434 role : 2, 435 isp_portid : 24; /* S_ID */ 436 437 uint16_t isp_fwoptions; 438 uint16_t isp_xfwoptions; 439 uint16_t isp_zfwoptions; 440 uint16_t isp_loopid; /* hard loop id */ 441 uint16_t isp_sns_hdl; /* N-port handle for SNS */ 442 uint16_t isp_lasthdl; /* only valid for channel 0 */ 443 uint16_t isp_maxalloc; 444 uint16_t isp_fabric_params; 445 uint16_t isp_login_hdl; /* Logging in handle */ 446 uint8_t isp_retry_delay; 447 uint8_t isp_retry_count; 448 449 /* 450 * Current active WWNN/WWPN 451 */ 452 uint64_t isp_wwnn; 453 uint64_t isp_wwpn; 454 455 /* 456 * NVRAM WWNN/WWPN 457 */ 458 uint64_t isp_wwnn_nvram; 459 uint64_t isp_wwpn_nvram; 460 461 /* 462 * Our Port Data Base 463 */ 464 fcportdb_t portdb[MAX_FC_TARG]; 465 466 /* 467 * Scratch DMA mapped in area to fetch Port Database stuff, etc. 468 */ 469 void * isp_scratch; 470 XS_DMA_ADDR_T isp_scdma; 471 472 uint8_t isp_scanscratch[ISP_FC_SCRLEN]; 473 } fcparam; 474 475 #define FW_CONFIG_WAIT 0 476 #define FW_WAIT_LINK 1 477 #define FW_WAIT_LOGIN 2 478 #define FW_READY 3 479 #define FW_LOSS_OF_SYNC 4 480 #define FW_ERROR 5 481 #define FW_REINIT 6 482 #define FW_NON_PART 7 483 484 #define LOOP_NIL 0 485 #define LOOP_HAVE_LINK 1 486 #define LOOP_HAVE_ADDR 2 487 #define LOOP_TESTING_LINK 3 488 #define LOOP_LTEST_DONE 4 489 #define LOOP_SCANNING_LOOP 5 490 #define LOOP_LSCAN_DONE 6 491 #define LOOP_SCANNING_FABRIC 7 492 #define LOOP_FSCAN_DONE 8 493 #define LOOP_SYNCING_PDB 9 494 #define LOOP_READY 10 495 496 #define TOPO_NL_PORT 0 497 #define TOPO_FL_PORT 1 498 #define TOPO_N_PORT 2 499 #define TOPO_F_PORT 3 500 #define TOPO_PTP_STUB 4 501 502 #define TOPO_IS_FABRIC(x) ((x) == TOPO_FL_PORT || (x) == TOPO_F_PORT) 503 504 /* 505 * Soft Structure per host adapter 506 */ 507 struct ispsoftc { 508 /* 509 * Platform (OS) specific data 510 */ 511 struct isposinfo isp_osinfo; 512 513 /* 514 * Pointer to bus specific functions and data 515 */ 516 struct ispmdvec * isp_mdvec; 517 518 /* 519 * (Mostly) nonvolatile state. Board specific parameters 520 * may contain some volatile state (e.g., current loop state). 521 */ 522 523 void * isp_param; /* type specific */ 524 uint64_t isp_fwattr; /* firmware attributes */ 525 uint16_t isp_fwrev[3]; /* Loaded F/W revision */ 526 uint16_t isp_maxcmds; /* max possible I/O cmds */ 527 uint8_t isp_type; /* HBA Chip Type */ 528 uint8_t isp_revision; /* HBA Chip H/W Revision */ 529 uint16_t isp_nchan; /* number of channels */ 530 uint32_t isp_maxluns; /* maximum luns supported */ 531 532 uint32_t isp_clock : 8, /* input clock */ 533 : 4, 534 isp_port : 1, /* 23XX/24XX only */ 535 isp_open : 1, /* opened (ioctl) */ 536 isp_bustype : 1, /* SBus or PCI */ 537 isp_loaded_fw : 1, /* loaded firmware */ 538 isp_dblev : 16; /* debug log mask */ 539 540 541 uint32_t isp_confopts; /* config options */ 542 543 uint32_t isp_rqstinrp; /* register for REQINP */ 544 uint32_t isp_rqstoutrp; /* register for REQOUTP */ 545 uint32_t isp_respinrp; /* register for RESINP */ 546 uint32_t isp_respoutrp; /* register for RESOUTP */ 547 548 /* 549 * Volatile state 550 */ 551 552 volatile u_int isp_mboxbsy; /* mailbox command active */ 553 volatile u_int isp_state; 554 volatile u_int isp_nactive; /* how many commands active */ 555 volatile mbreg_t isp_curmbx; /* currently active mailbox command */ 556 volatile uint32_t isp_reqodx; /* index of last ISP pickup */ 557 volatile uint32_t isp_reqidx; /* index of next request */ 558 volatile uint32_t isp_residx; /* index of last ISP write */ 559 volatile uint32_t isp_resodx; /* index of next result */ 560 volatile uint32_t isp_atioodx; /* index of next ATIO */ 561 volatile uint32_t isp_obits; /* mailbox command output */ 562 volatile uint32_t isp_serno; /* rolling serial number */ 563 volatile uint16_t isp_mboxtmp[MAX_MAILBOX]; 564 volatile uint16_t isp_lastmbxcmd; /* last mbox command sent */ 565 volatile uint16_t isp_seqno; /* running sequence number */ 566 567 /* 568 * Active commands are stored here, indexed by handle functions. 569 */ 570 isp_hdl_t *isp_xflist; 571 isp_hdl_t *isp_xffree; 572 573 /* 574 * DMA mapped in area for synchronous IOCB requests. 575 */ 576 void * isp_iocb; 577 XS_DMA_ADDR_T isp_iocb_dma; 578 579 /* 580 * request/result queue pointers and DMA handles for them. 581 */ 582 void * isp_rquest; 583 void * isp_result; 584 XS_DMA_ADDR_T isp_rquest_dma; 585 XS_DMA_ADDR_T isp_result_dma; 586 #ifdef ISP_TARGET_MODE 587 /* for 24XX only */ 588 void * isp_atioq; 589 XS_DMA_ADDR_T isp_atioq_dma; 590 #endif 591 }; 592 593 #define SDPARAM(isp, chan) (&((sdparam *)(isp)->isp_param)[(chan)]) 594 #define FCPARAM(isp, chan) (&((fcparam *)(isp)->isp_param)[(chan)]) 595 596 #define ISP_SET_SENDMARKER(isp, chan, val) \ 597 if (IS_FC(isp)) { \ 598 FCPARAM(isp, chan)->sendmarker = val; \ 599 } else { \ 600 SDPARAM(isp, chan)->sendmarker = val; \ 601 } 602 603 #define ISP_TST_SENDMARKER(isp, chan) \ 604 (IS_FC(isp)? \ 605 FCPARAM(isp, chan)->sendmarker != 0 : \ 606 SDPARAM(isp, chan)->sendmarker != 0) 607 608 /* 609 * ISP Driver Run States 610 */ 611 #define ISP_NILSTATE 0 612 #define ISP_CRASHED 1 613 #define ISP_RESETSTATE 2 614 #define ISP_INITSTATE 3 615 #define ISP_RUNSTATE 4 616 617 /* 618 * ISP Runtime Configuration Options 619 */ 620 #define ISP_CFG_FULL_DUPLEX 0x01 /* Full Duplex (Fibre Channel only) */ 621 #define ISP_CFG_PORT_PREF 0x0e /* Mask for Port Prefs (all FC except 2100) */ 622 #define ISP_CFG_PORT_DEF 0x00 /* prefer connection type from NVRAM */ 623 #define ISP_CFG_LPORT_ONLY 0x02 /* insist on {N/F}L-Port connection */ 624 #define ISP_CFG_NPORT_ONLY 0x04 /* insist on {N/F}-Port connection */ 625 #define ISP_CFG_LPORT 0x06 /* prefer {N/F}L-Port connection */ 626 #define ISP_CFG_NPORT 0x08 /* prefer {N/F}-Port connection */ 627 #define ISP_CFG_1GB 0x10 /* force 1GB connection (23XX only) */ 628 #define ISP_CFG_2GB 0x20 /* force 2GB connection (23XX only) */ 629 #define ISP_CFG_NORELOAD 0x80 /* don't download f/w */ 630 #define ISP_CFG_NONVRAM 0x40 /* ignore NVRAM */ 631 #define ISP_CFG_NOFCTAPE 0x100 /* disable FC-Tape */ 632 #define ISP_CFG_FCTAPE 0x200 /* enable FC-Tape */ 633 #define ISP_CFG_OWNFSZ 0x400 /* override NVRAM frame size */ 634 #define ISP_CFG_OWNLOOPID 0x800 /* override NVRAM loopid */ 635 #define ISP_CFG_OWNEXCTHROTTLE 0x1000 /* override NVRAM execution throttle */ 636 #define ISP_CFG_4GB 0x2000 /* force 4GB connection (24XX only) */ 637 #define ISP_CFG_8GB 0x4000 /* force 8GB connection (25XX only) */ 638 #define ISP_CFG_16GB 0x8000 /* force 16GB connection (82XX only) */ 639 640 /* 641 * For each channel, the outer layers should know what role that channel 642 * will take: ISP_ROLE_NONE, ISP_ROLE_INITIATOR, ISP_ROLE_TARGET, 643 * ISP_ROLE_BOTH. 644 * 645 * If you set ISP_ROLE_NONE, the cards will be reset, new firmware loaded, 646 * NVRAM read, and defaults set, but any further initialization (e.g. 647 * INITIALIZE CONTROL BLOCK commands for 2X00 cards) won't be done. 648 * 649 * If INITIATOR MODE isn't set, attempts to run commands will be stopped 650 * at isp_start and completed with the equivalent of SELECTION TIMEOUT. 651 * 652 * If TARGET MODE is set, it doesn't mean that the rest of target mode support 653 * needs to be enabled, or will even work. What happens with the 2X00 cards 654 * here is that if you have enabled it with TARGET MODE as part of the ICB 655 * options, but you haven't given the f/w any ram resources for ATIOs or 656 * Immediate Notifies, the f/w just handles what it can and you never see 657 * anything. Basically, it sends a single byte of data (the first byte, 658 * which you can set as part of the INITIALIZE CONTROL BLOCK command) for 659 * INQUIRY, and sends back QUEUE FULL status for any other command. 660 * 661 */ 662 #define ISP_ROLE_NONE 0x0 663 #define ISP_ROLE_TARGET 0x1 664 #define ISP_ROLE_INITIATOR 0x2 665 #define ISP_ROLE_BOTH (ISP_ROLE_TARGET|ISP_ROLE_INITIATOR) 666 #define ISP_ROLE_EITHER ISP_ROLE_BOTH 667 #ifndef ISP_DEFAULT_ROLES 668 /* 669 * Counterintuitively, we prefer to default to role 'none' 670 * if we are enable target mode support. This gives us the 671 * maximum flexibility as to which port will do what. 672 */ 673 #ifdef ISP_TARGET_MODE 674 #define ISP_DEFAULT_ROLES ISP_ROLE_NONE 675 #else 676 #define ISP_DEFAULT_ROLES ISP_ROLE_INITIATOR 677 #endif 678 #endif 679 680 681 /* 682 * Firmware related defines 683 */ 684 #define ISP_CODE_ORG 0x1000 /* default f/w code start */ 685 #define ISP_CODE_ORG_2300 0x0800 /* ..except for 2300s */ 686 #define ISP_CODE_ORG_2400 0x100000 /* ..and 2400s */ 687 #define ISP_FW_REV(maj, min, mic) ((maj << 24) | (min << 16) | mic) 688 #define ISP_FW_MAJOR(code) ((code >> 24) & 0xff) 689 #define ISP_FW_MINOR(code) ((code >> 16) & 0xff) 690 #define ISP_FW_MICRO(code) ((code >> 8) & 0xff) 691 #define ISP_FW_REVX(xp) ((xp[0]<<24) | (xp[1] << 16) | xp[2]) 692 #define ISP_FW_MAJORX(xp) (xp[0]) 693 #define ISP_FW_MINORX(xp) (xp[1]) 694 #define ISP_FW_MICROX(xp) (xp[2]) 695 #define ISP_FW_NEWER_THAN(i, major, minor, micro) \ 696 (ISP_FW_REVX((i)->isp_fwrev) > ISP_FW_REV(major, minor, micro)) 697 #define ISP_FW_OLDER_THAN(i, major, minor, micro) \ 698 (ISP_FW_REVX((i)->isp_fwrev) < ISP_FW_REV(major, minor, micro)) 699 700 /* 701 * Bus (implementation) types 702 */ 703 #define ISP_BT_PCI 0 /* PCI Implementations */ 704 #define ISP_BT_SBUS 1 /* SBus Implementations */ 705 706 /* 707 * If we have not otherwise defined SBus support away make sure 708 * it is defined here such that the code is included as default 709 */ 710 #ifndef ISP_SBUS_SUPPORTED 711 #define ISP_SBUS_SUPPORTED 1 712 #endif 713 714 /* 715 * Chip Types 716 */ 717 #define ISP_HA_SCSI 0xf 718 #define ISP_HA_SCSI_UNKNOWN 0x1 719 #define ISP_HA_SCSI_1020 0x2 720 #define ISP_HA_SCSI_1020A 0x3 721 #define ISP_HA_SCSI_1040 0x4 722 #define ISP_HA_SCSI_1040A 0x5 723 #define ISP_HA_SCSI_1040B 0x6 724 #define ISP_HA_SCSI_1040C 0x7 725 #define ISP_HA_SCSI_1240 0x8 726 #define ISP_HA_SCSI_1080 0x9 727 #define ISP_HA_SCSI_1280 0xa 728 #define ISP_HA_SCSI_10160 0xb 729 #define ISP_HA_SCSI_12160 0xc 730 #define ISP_HA_FC 0xf0 731 #define ISP_HA_FC_2100 0x10 732 #define ISP_HA_FC_2200 0x20 733 #define ISP_HA_FC_2300 0x30 734 #define ISP_HA_FC_2312 0x40 735 #define ISP_HA_FC_2322 0x50 736 #define ISP_HA_FC_2400 0x60 737 #define ISP_HA_FC_2500 0x70 738 #define ISP_HA_FC_2600 0x80 739 740 #define IS_SCSI(isp) (isp->isp_type & ISP_HA_SCSI) 741 #define IS_1020(isp) (isp->isp_type < ISP_HA_SCSI_1240) 742 #define IS_1240(isp) (isp->isp_type == ISP_HA_SCSI_1240) 743 #define IS_1080(isp) (isp->isp_type == ISP_HA_SCSI_1080) 744 #define IS_1280(isp) (isp->isp_type == ISP_HA_SCSI_1280) 745 #define IS_10160(isp) (isp->isp_type == ISP_HA_SCSI_10160) 746 #define IS_12160(isp) (isp->isp_type == ISP_HA_SCSI_12160) 747 748 #define IS_12X0(isp) (IS_1240(isp) || IS_1280(isp)) 749 #define IS_1X160(isp) (IS_10160(isp) || IS_12160(isp)) 750 #define IS_DUALBUS(isp) (IS_12X0(isp) || IS_12160(isp)) 751 #define IS_ULTRA2(isp) (IS_1080(isp) || IS_1280(isp) || IS_1X160(isp)) 752 #define IS_ULTRA3(isp) (IS_1X160(isp)) 753 754 #define IS_FC(isp) ((isp)->isp_type & ISP_HA_FC) 755 #define IS_2100(isp) ((isp)->isp_type == ISP_HA_FC_2100) 756 #define IS_2200(isp) ((isp)->isp_type == ISP_HA_FC_2200) 757 #define IS_23XX(isp) ((isp)->isp_type >= ISP_HA_FC_2300 && \ 758 (isp)->isp_type < ISP_HA_FC_2400) 759 #define IS_2300(isp) ((isp)->isp_type == ISP_HA_FC_2300) 760 #define IS_2312(isp) ((isp)->isp_type == ISP_HA_FC_2312) 761 #define IS_2322(isp) ((isp)->isp_type == ISP_HA_FC_2322) 762 #define IS_24XX(isp) ((isp)->isp_type >= ISP_HA_FC_2400) 763 #define IS_25XX(isp) ((isp)->isp_type >= ISP_HA_FC_2500) 764 #define IS_26XX(isp) ((isp)->isp_type >= ISP_HA_FC_2600) 765 766 /* 767 * DMA related macros 768 */ 769 #define DMA_WD3(x) (((uint16_t)(((uint64_t)x) >> 48)) & 0xffff) 770 #define DMA_WD2(x) (((uint16_t)(((uint64_t)x) >> 32)) & 0xffff) 771 #define DMA_WD1(x) ((uint16_t)((x) >> 16) & 0xffff) 772 #define DMA_WD0(x) ((uint16_t)((x) & 0xffff)) 773 774 #define DMA_LO32(x) ((uint32_t) (x)) 775 #define DMA_HI32(x) ((uint32_t)(((uint64_t)x) >> 32)) 776 777 /* 778 * Core System Function Prototypes 779 */ 780 781 /* 782 * Reset Hardware. Totally. Assumes that you'll follow this with a call to isp_init. 783 */ 784 void isp_reset(ispsoftc_t *, int); 785 786 /* 787 * Initialize Hardware to known state 788 */ 789 void isp_init(ispsoftc_t *); 790 791 /* 792 * Reset the ISP and call completion for any orphaned commands. 793 */ 794 int isp_reinit(ispsoftc_t *, int); 795 796 /* 797 * Shutdown hardware after use. 798 */ 799 void isp_shutdown(ispsoftc_t *); 800 801 /* 802 * Internal Interrupt Service Routine 803 */ 804 #ifdef ISP_TARGET_MODE 805 void isp_intr_atioq(ispsoftc_t *); 806 #endif 807 void isp_intr_async(ispsoftc_t *, uint16_t event); 808 void isp_intr_mbox(ispsoftc_t *, uint16_t mbox0); 809 void isp_intr_respq(ispsoftc_t *); 810 811 812 /* 813 * Command Entry Point- Platform Dependent layers call into this 814 */ 815 int isp_start(XS_T *); 816 817 /* these values are what isp_start returns */ 818 #define CMD_COMPLETE 101 /* command completed */ 819 #define CMD_EAGAIN 102 /* busy- maybe retry later */ 820 #define CMD_QUEUED 103 /* command has been queued for execution */ 821 #define CMD_RQLATER 104 /* requeue this command later */ 822 823 /* 824 * Command Completion Point- Core layers call out from this with completed cmds 825 */ 826 void isp_done(XS_T *); 827 828 /* 829 * Platform Dependent to External to Internal Control Function 830 * 831 * Assumes locks are held on entry. You should note that with many of 832 * these commands locks may be released while this function is called. 833 * 834 * ... ISPCTL_RESET_BUS, int channel); 835 * Reset BUS on this channel 836 * ... ISPCTL_RESET_DEV, int channel, int target); 837 * Reset Device on this channel at this target. 838 * ... ISPCTL_ABORT_CMD, XS_T *xs); 839 * Abort active transaction described by xs. 840 * ... IPCTL_UPDATE_PARAMS); 841 * Update any operating parameters (speed, etc.) 842 * ... ISPCTL_FCLINK_TEST, int channel); 843 * Test FC link status on this channel 844 * ... ISPCTL_SCAN_LOOP, int channel); 845 * Scan local loop on this channel 846 * ... ISPCTL_SCAN_FABRIC, int channel); 847 * Scan fabric on this channel 848 * ... ISPCTL_PDB_SYNC, int channel); 849 * Synchronize port database on this channel 850 * ... ISPCTL_SEND_LIP, int channel); 851 * Send a LIP on this channel 852 * ... ISPCTL_GET_NAMES, int channel, int np, uint64_t *wwnn, uint64_t *wwpn) 853 * Get a WWNN/WWPN for this N-port handle on this channel 854 * ... ISPCTL_RUN_MBOXCMD, mbreg_t *mbp) 855 * Run this mailbox command 856 * ... ISPCTL_GET_PDB, int channel, int nphandle, isp_pdb_t *pdb) 857 * Get PDB on this channel for this N-port handle 858 * ... ISPCTL_PLOGX, isp_plcmd_t *) 859 * Performa a port login/logout 860 * ... ISPCTL_CHANGE_ROLE, int channel, int role); 861 * Change role of specified channel 862 * 863 * ISPCTL_PDB_SYNC is somewhat misnamed. It actually is the final step, in 864 * order, of ISPCTL_FCLINK_TEST, ISPCTL_SCAN_LOOP, and ISPCTL_SCAN_FABRIC. 865 * The main purpose of ISPCTL_PDB_SYNC is to complete management of logging 866 * and logging out of fabric devices (if one is on a fabric) and then marking 867 * the 'loop state' as being ready to now be used for sending commands to 868 * devices. 869 */ 870 typedef enum { 871 ISPCTL_RESET_BUS, 872 ISPCTL_RESET_DEV, 873 ISPCTL_ABORT_CMD, 874 ISPCTL_UPDATE_PARAMS, 875 ISPCTL_FCLINK_TEST, 876 ISPCTL_SCAN_FABRIC, 877 ISPCTL_SCAN_LOOP, 878 ISPCTL_PDB_SYNC, 879 ISPCTL_SEND_LIP, 880 ISPCTL_GET_NAMES, 881 ISPCTL_RUN_MBOXCMD, 882 ISPCTL_GET_PDB, 883 ISPCTL_PLOGX, 884 ISPCTL_CHANGE_ROLE 885 } ispctl_t; 886 int isp_control(ispsoftc_t *, ispctl_t, ...); 887 888 /* 889 * Platform Dependent to Internal to External Control Function 890 */ 891 892 typedef enum { 893 ISPASYNC_NEW_TGT_PARAMS, /* SPI New Target Parameters */ 894 ISPASYNC_BUS_RESET, /* All Bus Was Reset */ 895 ISPASYNC_LOOP_DOWN, /* FC Loop Down */ 896 ISPASYNC_LOOP_UP, /* FC Loop Up */ 897 ISPASYNC_LIP, /* FC LIP Received */ 898 ISPASYNC_LOOP_RESET, /* FC Loop Reset Received */ 899 ISPASYNC_CHANGE_NOTIFY, /* FC Change Notification */ 900 ISPASYNC_DEV_ARRIVED, /* FC Device Arrived */ 901 ISPASYNC_DEV_CHANGED, /* FC Device Changed */ 902 ISPASYNC_DEV_STAYED, /* FC Device Stayed */ 903 ISPASYNC_DEV_GONE, /* FC Device Departure */ 904 ISPASYNC_TARGET_NOTIFY, /* All target async notification */ 905 ISPASYNC_TARGET_NOTIFY_ACK, /* All target notify ack required */ 906 ISPASYNC_TARGET_ACTION, /* All target action requested */ 907 ISPASYNC_FW_CRASH, /* All Firmware has crashed */ 908 ISPASYNC_FW_RESTARTED /* All Firmware has been restarted */ 909 } ispasync_t; 910 void isp_async(ispsoftc_t *, ispasync_t, ...); 911 912 #define ISPASYNC_CHANGE_PDB 0 913 #define ISPASYNC_CHANGE_SNS 1 914 #define ISPASYNC_CHANGE_OTHER 2 915 916 /* 917 * Platform Independent Error Prinout 918 */ 919 void isp_prt_endcmd(ispsoftc_t *, XS_T *); 920 921 /* 922 * Platform Dependent Error and Debug Printout 923 * 924 * Two required functions for each platform must be provided: 925 * 926 * void isp_prt(ispsoftc_t *, int level, const char *, ...) 927 * void isp_xs_prt(ispsoftc_t *, XS_T *, int level, const char *, ...) 928 * 929 * but due to compiler differences on different platforms this won't be 930 * formally defined here. Instead, they go in each platform definition file. 931 */ 932 933 #define ISP_LOGALL 0x0 /* log always */ 934 #define ISP_LOGCONFIG 0x1 /* log configuration messages */ 935 #define ISP_LOGINFO 0x2 /* log informational messages */ 936 #define ISP_LOGWARN 0x4 /* log warning messages */ 937 #define ISP_LOGERR 0x8 /* log error messages */ 938 #define ISP_LOGDEBUG0 0x10 /* log simple debug messages */ 939 #define ISP_LOGDEBUG1 0x20 /* log intermediate debug messages */ 940 #define ISP_LOGDEBUG2 0x40 /* log most debug messages */ 941 #define ISP_LOGDEBUG3 0x80 /* log high frequency debug messages */ 942 #define ISP_LOG_SANCFG 0x100 /* log SAN configuration */ 943 #define ISP_LOG_CWARN 0x200 /* log SCSI command "warnings" (e.g., check conditions) */ 944 #define ISP_LOG_WARN1 0x400 /* log WARNS we might be interested at some time */ 945 #define ISP_LOGTINFO 0x1000 /* log informational messages (target mode) */ 946 #define ISP_LOGTDEBUG0 0x2000 /* log simple debug messages (target mode) */ 947 #define ISP_LOGTDEBUG1 0x4000 /* log intermediate debug messages (target) */ 948 #define ISP_LOGTDEBUG2 0x8000 /* log all debug messages (target) */ 949 950 /* 951 * Each Platform provides it's own isposinfo substructure of the ispsoftc 952 * defined above. 953 * 954 * Each platform must also provide the following macros/defines: 955 * 956 * 957 * ISP_FC_SCRLEN FC scratch area DMA length 958 * 959 * ISP_MEMZERO(dst, src) platform zeroing function 960 * ISP_MEMCPY(dst, src, count) platform copying function 961 * ISP_SNPRINTF(buf, bufsize, fmt, ...) snprintf 962 * ISP_DELAY(usecs) microsecond spindelay function 963 * ISP_SLEEP(isp, usecs) microsecond sleep function 964 * 965 * ISP_INLINE ___inline or not- depending on how 966 * good your debugger is 967 * ISP_MIN shorthand for ((a) < (b))? (a) : (b) 968 * 969 * NANOTIME_T nanosecond time type 970 * 971 * GET_NANOTIME(NANOTIME_T *) get current nanotime. 972 * 973 * GET_NANOSEC(NANOTIME_T *) get uint64_t from NANOTIME_T 974 * 975 * NANOTIME_SUB(NANOTIME_T *, NANOTIME_T *) 976 * subtract two NANOTIME_T values 977 * 978 * MAXISPREQUEST(ispsoftc_t *) maximum request queue size 979 * for this particular board type 980 * 981 * MEMORYBARRIER(ispsoftc_t *, barrier_type, offset, size, chan) 982 * 983 * Function/Macro the provides memory synchronization on 984 * various objects so that the ISP's and the system's view 985 * of the same object is consistent. 986 * 987 * MBOX_ACQUIRE(ispsoftc_t *) acquire lock on mailbox regs 988 * MBOX_WAIT_COMPLETE(ispsoftc_t *, mbreg_t *) wait for cmd to be done 989 * MBOX_NOTIFY_COMPLETE(ispsoftc_t *) notification of mbox cmd donee 990 * MBOX_RELEASE(ispsoftc_t *) release lock on mailbox regs 991 * 992 * FC_SCRATCH_ACQUIRE(ispsoftc_t *, chan) acquire lock on FC scratch area 993 * return -1 if you cannot 994 * FC_SCRATCH_RELEASE(ispsoftc_t *, chan) acquire lock on FC scratch area 995 * 996 * FCP_NEXT_CRN(ispsoftc_t *, XS_T *, rslt, channel, target, lun) generate the next command reference number. XS_T * may be null. 997 * 998 * SCSI_GOOD SCSI 'Good' Status 999 * SCSI_CHECK SCSI 'Check Condition' Status 1000 * SCSI_BUSY SCSI 'Busy' Status 1001 * SCSI_QFULL SCSI 'Queue Full' Status 1002 * 1003 * XS_T Platform SCSI transaction type (i.e., command for HBA) 1004 * XS_DMA_ADDR_T Platform PCI DMA Address Type 1005 * XS_GET_DMA_SEG(..) Get 32 bit dma segment list value 1006 * XS_GET_DMA64_SEG(..) Get 64 bit dma segment list value 1007 * XS_ISP(xs) gets an instance out of an XS_T 1008 * XS_CHANNEL(xs) gets the channel (bus # for DUALBUS cards) "" 1009 * XS_TGT(xs) gets the target "" 1010 * XS_LUN(xs) gets the lun "" 1011 * XS_CDBP(xs) gets a pointer to the scsi CDB "" 1012 * XS_CDBLEN(xs) gets the CDB's length "" 1013 * XS_XFRLEN(xs) gets the associated data transfer length "" 1014 * XS_TIME(xs) gets the time (in milliseconds) for this command 1015 * XS_GET_RESID(xs) gets the current residual count 1016 * XS_GET_RESID(xs, resid) sets the current residual count 1017 * XS_STSP(xs) gets a pointer to the SCSI status byte "" 1018 * XS_SNSP(xs) gets a pointer to the associate sense data 1019 * XS_TOT_SNSLEN(xs) gets the total length of sense data storage 1020 * XS_CUR_SNSLEN(xs) gets the currently used length of sense data storage 1021 * XS_SNSKEY(xs) dereferences XS_SNSP to get the current stored Sense Key 1022 * XS_SNSASC(xs) dereferences XS_SNSP to get the current stored Additional Sense Code 1023 * XS_SNSASCQ(xs) dereferences XS_SNSP to get the current stored Additional Sense Code Qualifier 1024 * XS_TAG_P(xs) predicate of whether this command should be tagged 1025 * XS_TAG_TYPE(xs) which type of tag to use 1026 * XS_SETERR(xs) set error state 1027 * 1028 * HBA_NOERROR command has no erros 1029 * HBA_BOTCH hba botched something 1030 * HBA_CMDTIMEOUT command timed out 1031 * HBA_SELTIMEOUT selection timed out (also port logouts for FC) 1032 * HBA_TGTBSY target returned a BUSY status 1033 * HBA_BUSRESET bus reset destroyed command 1034 * HBA_ABORTED command was aborted (by request) 1035 * HBA_DATAOVR a data overrun was detected 1036 * HBA_ARQFAIL Automatic Request Sense failed 1037 * 1038 * XS_ERR(xs) return current error state 1039 * XS_NOERR(xs) there is no error currently set 1040 * XS_INITERR(xs) initialize error state 1041 * 1042 * XS_SAVE_SENSE(xs, sp, total_len, this_len) save sense data (total and current amount) 1043 * 1044 * XS_APPEND_SENSE(xs, sp, len) append more sense data 1045 * 1046 * XS_SENSE_VALID(xs) indicates whether sense is valid 1047 * 1048 * DEFAULT_FRAMESIZE(ispsoftc_t *) Default Frame Size 1049 * DEFAULT_EXEC_THROTTLE(ispsoftc_t *) Default Execution Throttle 1050 * 1051 * DEFAULT_ROLE(ispsoftc_t *, int) Get Default Role for a channel 1052 * DEFAULT_IID(ispsoftc_t *, int) Default SCSI initiator ID 1053 * DEFAULT_LOOPID(ispsoftc_t *, int) Default FC Loop ID 1054 * 1055 * These establish reasonable defaults for each platform. 1056 * These must be available independent of card NVRAM and are 1057 * to be used should NVRAM not be readable. 1058 * 1059 * DEFAULT_NODEWWN(ispsoftc_t *, chan) Default FC Node WWN to use 1060 * DEFAULT_PORTWWN(ispsoftc_t *, chan) Default FC Port WWN to use 1061 * 1062 * These defines are hooks to allow the setting of node and 1063 * port WWNs when NVRAM cannot be read or is to be overriden. 1064 * 1065 * ACTIVE_NODEWWN(ispsoftc_t *, chan) FC Node WWN to use 1066 * ACTIVE_PORTWWN(ispsoftc_t *, chan) FC Port WWN to use 1067 * 1068 * After NVRAM is read, these will be invoked to get the 1069 * node and port WWNs that will actually be used for this 1070 * channel. 1071 * 1072 * 1073 * ISP_IOXPUT_8(ispsoftc_t *, uint8_t srcval, uint8_t *dstptr) 1074 * ISP_IOXPUT_16(ispsoftc_t *, uint16_t srcval, uint16_t *dstptr) 1075 * ISP_IOXPUT_32(ispsoftc_t *, uint32_t srcval, uint32_t *dstptr) 1076 * 1077 * ISP_IOXGET_8(ispsoftc_t *, uint8_t *srcptr, uint8_t dstrval) 1078 * ISP_IOXGET_16(ispsoftc_t *, uint16_t *srcptr, uint16_t dstrval) 1079 * ISP_IOXGET_32(ispsoftc_t *, uint32_t *srcptr, uint32_t dstrval) 1080 * 1081 * ISP_SWIZZLE_NVRAM_WORD(ispsoftc_t *, uint16_t *) 1082 * ISP_SWIZZLE_NVRAM_LONG(ispsoftc_t *, uint32_t *) 1083 * ISP_SWAP16(ispsoftc_t *, uint16_t srcval) 1084 * ISP_SWAP32(ispsoftc_t *, uint32_t srcval) 1085 */ 1086 1087 #ifdef ISP_TARGET_MODE 1088 /* 1089 * The functions below are for the publicly available 1090 * target mode functions that are internal to the Qlogic driver. 1091 */ 1092 1093 /* 1094 * This function handles new response queue entry appropriate for target mode. 1095 */ 1096 int isp_target_notify(ispsoftc_t *, void *, uint32_t *); 1097 1098 /* 1099 * This function externalizes the ability to acknowledge an Immediate Notify request. 1100 */ 1101 int isp_notify_ack(ispsoftc_t *, void *); 1102 1103 /* 1104 * This function externalized acknowledging (success/fail) an ABTS frame 1105 */ 1106 int isp_acknak_abts(ispsoftc_t *, void *, int); 1107 1108 /* 1109 * General request queue 'put' routine for target mode entries. 1110 */ 1111 int isp_target_put_entry(ispsoftc_t *isp, void *); 1112 1113 /* 1114 * General routine to put back an ATIO entry- 1115 * used for replenishing f/w resource counts. 1116 * The argument is a pointer to a source ATIO 1117 * or ATIO2. 1118 */ 1119 int isp_target_put_atio(ispsoftc_t *, void *); 1120 1121 /* 1122 * General routine to send a final CTIO for a command- used mostly for 1123 * local responses. 1124 */ 1125 int isp_endcmd(ispsoftc_t *, ...); 1126 #define ECMD_SVALID 0x100 1127 #define ECMD_RVALID 0x200 1128 #define ECMD_TERMINATE 0x400 1129 1130 /* 1131 * Handle an asynchronous event 1132 */ 1133 void isp_target_async(ispsoftc_t *, int, int); 1134 #endif 1135 #endif /* _ISPVAR_H */ 1136