xref: /freebsd-12.1/contrib/binutils/include/opcode/ChangeLog (revision c7549e32)

2002-04-27  Alan Modra  <[email protected]>

	Merge from mainline
	2002-04-11  Alan Modra  <[email protected]>
	* i386.h: Add intel mode cmpsd and movsd.
	Put them before SSE2 insns, so that rep prefix works.

2002-02-25  Alan Modra  <[email protected]>

	* ppc.h (PPC_OPCODE_POWER4, PPC_OPCODE_NOPOWER4): Define.

Mon Feb 18 17:26:10 CET 2002  Jan Hubicka  <[email protected]>

	* i386.h (push,pop): Fix Reg64 to WordReg to allow 16bit operands.

Fri Feb 15 15:16:40 CET 2002  Jan Hubicka  <[email protected]>

	* i386.h (push,pop): Allow 16bit operands in 64bit mode.
	(xchg): Fix.
	(in, out): Disable 64bit operands.
	(call, jmp): Avoid REX prefixes.
	(jcxz): Prohibit in 64bit mode
	(jrcxz, loop): Add 64bit variants.
	(movq): Fix patterns.
	(movmskps, pextrw, pinstrw): Add 64bit variants.

2002-01-31  Ivan Guzvinec  <[email protected]>

	* or32.h: New file.

2002-01-22  Graydon Hoare  <[email protected]>

	* cgen.h (CGEN_MAYBE_MULTI_IFLD): New structure.
	(CGEN_OPERAND): Add CGEN_MAYBE_MULTI_IFLD field.

2002-01-21  Thomas Klausner <[email protected]>

	* h8300.h: Comment typo fix.

2002-01-03  matthew green  <[email protected]>

	* ppc.h (PPC_OPCODE_BOOKE): BookE is not Motorola specific.
	(PPC_OPCODE_BOOKE64): Likewise.

Mon Dec 31 16:45:41 2001  Jeffrey A Law  ([email protected])

	* hppa.h (call, ret): Move to end of table.
	(addb, addib): PA2.0 variants should have been PA2.0W.
	(ldw, ldh, ldb, stw, sth, stb, stwa): Reorder to keep disassembler
	happy.
	(fldw, fldd, fstw, fstd, bb): Likewise.
	(short loads/stores): Tweak format specifier slightly to keep
	disassembler happy.
	(indexed loads/stores): Likewise.
	(absolute loads/stores): Likewise.

2001-12-04  Alexandre Oliva  <[email protected]>

	* d10v.h (OPERAND_NOSP): New macro.

2001-11-29  Alexandre Oliva  <[email protected]>

	* d10v.h (OPERAND_SP): New macro.

2001-11-15  Alan Modra  <[email protected]>

	* ppc.h (struct powerpc_operand <insert, extract>): Add dialect param.

2001-11-11  Timothy Wall  <[email protected]>

	* tic54x.h: Revise opcode layout; don't really need a separate
	structure for parallel opcodes.

2001-11-13  Zack Weinberg <[email protected]>
	    Alan Modra  <[email protected]>

	* i386.h (i386_optab): Add entries for "sldr", "smsw" and "str" to
	accept WordReg.

2001-11-04  Chris Demetriou  <[email protected]>

	* mips.h (OPCODE_IS_MEMBER): Remove extra space.

2001-10-30  Hans-Peter Nilsson  <[email protected]>

	* mmix.h: New file.

2001-10-18  Chris Demetriou  <[email protected]>

	* mips.h (OPCODE_IS_MEMBER): Add a no-op term to the end
	of the expression, to make source code merging easier.

2001-10-17  Chris Demetriou  <[email protected]>

	* mips.h: Sort coprocessor instruction argument characters
	in comment, add a few more words of description for "H".

2001-10-17  Chris Demetriou  <[email protected]>

	* mips.h (INSN_SB1): New cpu-specific instruction bit.
	(OPCODE_IS_MEMBER): Allow instructions matching INSN_SB1
	if cpu is CPU_SB1.

2001-10-17  matthew green  <[email protected]>

	* ppc.h (PPC_OPCODE_BOOKE64): Fix typo.

2001-10-12  matthew green  <[email protected]>

	* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_BOOKE64, PPC_OPCODE_403): New
	opcode flags for BookE 32-bit, BookE 64-bit and PowerPC 403
	instructions, respectively.

2001-09-27  Nick Clifton  <[email protected]>

	* v850.h: Remove spurious comment.

2001-09-21  Nick Clifton  <[email protected]>

	* h8300.h: Fix compile time warning messages

2001-09-04  Richard Henderson  <[email protected]>

	* alpha.h (struct alpha_operand): Pack elements into bitfields.

2001-08-31  Eric Christopher  <[email protected]>

	* mips.h: Remove CPU_MIPS32_4K.

2001-08-27  Torbjorn Granlund  <[email protected]>

	* ppc.h (PPC_OPERAND_DS): Define.

2001-08-25  Andreas Jaeger  <[email protected]>

	* d30v.h: Fix declaration of reg_name_cnt.

	* d10v.h: Fix declaration of d10v_reg_name_cnt.

	* arc.h: Add prototypes from opcodes/arc-opc.c.

2001-08-16  Thiemo Seufer <[email protected]>

	* mips.h (INSN_10000): Define.
	(OPCODE_IS_MEMBER): Check for INSN_10000.

2001-08-10  Alan Modra  <[email protected]>

	* ppc.h: Revert 2001-08-08.

2001-08-10  Richard Sandiford  <[email protected]>

	* mips.h (INSN_GP32): Remove.
	(OPCODE_IS_MEMBER): Remove gp32 parameter.
	(M_MOVE): New macro identifier.

2001-08-08  Alan Modra  <[email protected]>

	1999-10-25  Torbjorn Granlund  <[email protected]>
	* ppc.h (struct powerpc_operand): New field `reloc'.

2001-08-01  Aldy Hernandez  <[email protected]>

	* mips.h (INSN_ISA_MASK): Nuke bits 12-15.

2001-07-12  Jeff Johnston  <[email protected]>

	* cgen.h (CGEN_INSN): Add regex support.
	(build_insn_regex): Declare.

2001-07-11  Frank Ch. Eigler  <[email protected]>

	* cgen.h (CGEN_MACH): Add insn_chunk_bitsize field.
	(cgen_cpu_desc): Ditto.

2001-07-07  Ben Elliston  <[email protected]>

	* m88k.h: Clean up and reformat. Remove unused code.

2001-06-14  Geoffrey Keating  <[email protected]>

	* cgen.h (cgen_keyword): Add nonalpha_chars field.

2001-05-23  Thiemo Seufer <[email protected]>

	* mips.h (CPU_R12000): Define.

2001-05-23  John Healy  <[email protected]>

	* cgen.h: Increased CGEN_MAX_SYNTAX_ELEMENTS to 48.

2001-05-15  Thiemo Seufer <[email protected]>

	* mips.h (INSN_ISA_MASK): Define.

2001-05-12  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Second operand of cvtps2dq is an xmm reg,
	not an mmx reg.  Swap xmm/mmx regs on both movdq2q and movq2dq,
	and use InvMem as these insns must have register operands.

2001-05-04  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Move InvMem to first operand of pmovmskb
	and pextrw to swap reg/rm assignments.

2001-04-05  Hans-Peter Nilsson  <[email protected]>

	* cris.h (enum cris_insn_version_usage): Correct comment for
	cris_ver_v3p.

2001-03-24  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Correct entry for "movntdq".  Add "punpcklqdq".
	Add InvMem to first operand of "maskmovdqu".

2001-03-22  Hans-Peter Nilsson  <[email protected]>

	* cris.h (ADD_PC_INCR_OPCODE): New macro.

2001-03-21  Kazu Hirata  <[email protected]>

	* h8300.h: Fix formatting.

2001-03-22  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Add paddq, psubq.

2001-03-19  Alan Modra  <[email protected]>

	* i386.h (REGNAM_AL, REGNAM_AX, REGNAM_EAX): Define.

2001-02-28  Igor Shevlyakov  <[email protected]>

	* m68k.h: new defines for Coldfire V4. Update mcf to know
	about mcf5407.

2001-02-18  lars brinkhoff  <[email protected]>

	* pdp11.h: New file.

2001-02-12  Jan Hubicka  <[email protected]>

	* i386.h (i386_optab): SSE integer converison instructions have
	64bit versions on x86-64.

2001-02-10  Nick Clifton  <[email protected]>

	* mips.h: Remove extraneous whitespace.  Formating change to allow
	for future contribution.

2001-02-09  Martin Schwidefsky  <[email protected]>

	* s390.h: New file.

2001-02-02  Patrick Macdonald  <[email protected]>

        * cgen.h (CGEN_SYNTAX_CHAR_TYPE): Typedef as unsigned short.
        (CGEN_MAX_SYNTAX_ELEMENTS): Rename from CGEN_MAX_SYNTAX_BYTES.
        (CGEN_SYNTAX): Define using CGEN_MAX_SYNTAX_ELEMENTS.

2001-01-24  Karsten Keil  <[email protected]>

	* i386.h (i386_optab): Fix swapgs

2001-01-14  Alan Modra  <[email protected]>

	* hppa.h: Describe new '<' and '>' operand types, and tidy
	existing comments.
	(pa_opcodes): Add entries for missing wide mode ldi,ldo,ldw,stw.
	Remove duplicate "ldw j(s,b),x".  Sort some entries.

2001-01-13  Jan Hubicka  <[email protected]>

	* i386.h (i386_optab): Fix pusha and ret templates.

2001-01-11  Peter Targett  <[email protected]>

	* arc.h (ARC_MACH_5, ARC_MACH_6, ARC_MACH_7, ARC_MACH_8): New
	definitions for masking cpu type.
	(arc_ext_operand_value) New structure for storing extended
	operands.
	(ARC_OPERAND_*) Flags for operand values.

2001-01-10  Jan Hubicka  <[email protected]>

	* i386.h (pinsrw): Add.
	(pshufw): Remove.
	(cvttpd2dq): Fix operands.
	(cvttps2dq): Likewise.
	(movq2q): Rename to movdq2q.

2001-01-10  Richard Schaal  <[email protected]>

	* i386.h: Correct movnti instruction.

2001-01-09  Jeff Johnston  <[email protected]>

	* cgen.h (CGEN_SYNTAX_CHAR_TYPE): New typedef based on max number
	of operands (unsigned char or unsigned short).
	(CGEN_SYNTAX): Changed to make array CGEN_SYNTAX_CHAR_TYPE.
	(CGEN_SYNTAX_CHAR): Changed to cast to unsigned char.

2001-01-05  Jan Hubicka  <[email protected]>

	* i386.h (i386_optab): Make [sml]fence template to use immext field.

2001-01-03  Jan Hubicka  <[email protected]>

	* i386.h (i386_optab): Fix 64bit pushf template; Add instructions
	introduced by Pentium4

2000-12-30  Jan Hubicka  <[email protected]>

	* i386.h (i386_optab): Add "rex*" instructions;
	add swapgs; disable jmp/call far direct instructions for
	64bit mode; add syscall and sysret; disable registers for 0xc6
	template.  Add 'q' suffixes to extendable instructions, disable
	obsolete instructions, add new sign/zero extension ones.
	(i386_regtab): Add extended registers.
	(*Suf): Add No_qSuf.
	(q_Suf, wlq_Suf, bwlq_Suf): New.

2000-12-20  Jan Hubicka  <[email protected]>

	* i386.h (i386_optab): Replace "Imm" with "EncImm".
	(i386_regtab): Add flags field.

2000-12-12  Nick Clifton  <[email protected]>

	* mips.h: Fix formatting.

2000-12-01  Chris Demetriou  <[email protected]>

        mips.h (OP_MASK_SYSCALL, OP_SH_SYSCALL): Delete.
        (OP_MASK_CODE20, OP_SH_CODE20): Define, with values of old
        OP_*_SYSCALL definitions.
        (OP_SH_CODE19, OP_MASK_CODE19): Define, for use as
        19 bit wait codes.
        (MIPS operand specifier comments): Remove 'm', add 'U' and
        'J', and update the meaning of 'B' so that it's more general.

        * mips.h (INSN_ISA1, INSN_ISA2, INSN_ISA3, INSN_ISA4,
        INSN_ISA5): Renumber, redefine to mean the ISA at which the
        instruction was added.
        (INSN_ISA32): New constant.
        (INSN_4650, INSN_4010, INSN_4100, INSN_3900, INSN_GP32):
        Renumber to avoid new and/or renumbered INSN_* constants.
        (INSN_MIPS32): Delete.
        (ISA_UNKNOWN): New constant to indicate unknown ISA.
        (ISA_MIPS1, ISA_MIPS2, ISA_MIPS3, ISA_MIPS4, ISA_MIPS5,
        ISA_MIPS32): New constants, defined to be the mask of INSN_*
        constants available at that ISA level.
        (CPU_UNKNOWN): New constant to indicate unknown CPU.
        (CPU_4K, CPU_MIPS32_4K): Rename the former to the latter,
        define it with a unique value.
        (OPCODE_IS_MEMBER): Update for new ISA membership-related
        constant meanings.

        * mips.h (INSN_ISA64, ISA_MIPS5, ISA_MIPS64): New
        definitions.

        * mips.h (CPU_SB1): New constant.

2000-10-20  Jakub Jelinek  <[email protected]>

	* sparc.h (enum sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_V9B.
	Note that '3' is used for siam operand.

2000-09-22  Jim Wilson  <[email protected]>

	* ia64.h (enum ia64_dependency_semantics): Add IA64_DVS_STOP.

2000-09-13  Anders Norlander  <[email protected]>

	* mips.h: Use defines instead of hard-coded processor numbers.
	(CPU_R2000, CPU_R3000, CPU_R3900, CPU_R4000, CPU_R4010,
	CPU_VR4100, CPU_R4111, CPU_R4300, CPU_R4400, CPU_R4600, CPU_R4650,
	CPU_R5000, CPU_R6000, CPU_R8000, CPU_R10000, CPU_MIPS32, CPU_4K,
	CPU_4KC, CPU_4KM, CPU_4KP): Define..
	(OPCODE_IS_MEMBER): Use new defines.
	(OP_MASK_SEL, OP_SH_SEL): Define.
	(OP_MASK_CODE20, OP_SH_CODE20): Define.
	Add 'P' to used characters.
	Use 'H' for coprocessor select field.
	Use 'm' for 20 bit breakpoint code.
	Document new arg characters and add to used characters.
	(INSN_MIPS32): New define for MIPS32 extensions.
	(OPCODE_IS_MEMBER): Recognize MIPS32 instructions.

2000-09-05  Alan Modra  <[email protected]>

	* hppa.h: Mention cz completer.

2000-08-16  Jim Wilson  <[email protected]>

	* ia64.h (IA64_OPCODE_POSTINC): New.

2000-08-15  H.J. Lu  <[email protected]>

	* i386.h: Swap the Intel syntax "movsx"/"movzx" due to the
	IgnoreSize change.

2000-08-08  Jason Eckhardt  <[email protected]>

	* i860.h: Small formatting adjustments.

2000-07-29  Marek Michalkiewicz  <[email protected]>

	* avr.h (AVR_UNDEF_P, AVR_SKIP_P, AVR_DISP0_P): New macros.
	Move related opcodes closer to each other.
	Minor changes in comments, list undefined opcodes.

2000-07-26  Dave Brolley  <[email protected]>

	* cgen.h (cgen_hw_lookup_by_num): Second parameter is unsigned.

2000-07-22  Jason Eckhardt  <[email protected]>

	* i860.h (btne, bte, bla): Changed these opcodes
	to use sbroff ('r') instead of split16 ('s').
	(J, K, L, M): New operand types for 16-bit aligned fields.
	(ld.x, {p}fld.x, fst.x, pst.d): Changed these opcodes to
	use I, J, K, L, M instead of just I.
	(T, U): New operand types for split 16-bit aligned fields.
	(st.x): Changed these opcodes to use S, T, U instead of just S.
	(andh, andnoth, orh, xorh): Deleted 3-register forms as they do not
	exist on the i860.
	(pfgt.sd, pfle.sd): Deleted these as they do not exist on the i860.
	(pfeq.ss, pfeq.dd): New opcodes.
	(st.s): Fixed incorrect mask bits.
	(fmlow): Fixed incorrect mask bits.
	(fzchkl, pfzchkl): Fixed incorrect mask bits.
	(faddz, pfaddz): Fixed incorrect mask bits.
	(form, pform): Fixed incorrect mask bits.
	(pfld.l): Fixed incorrect mask bits.
	(fst.q): Fixed incorrect mask bits.
	(all floating point opcodes): Fixed incorrect mask bits for
	handling of dual bit.

2000-07-20  Hans-Peter Nilsson  <[email protected]>

	cris.h: New file.

2000-06-26  Marek Michalkiewicz  <[email protected]>

	* avr.h (AVR_ISA_WRAP): Remove, now assumed if not AVR_ISA_MEGA.
	(AVR_ISA_ESPM): Remove, because ESPM removed in databook update.
	(AVR_ISA_85xx): Remove, all uses changed back to AVR_ISA_2xxx.
	(AVR_ISA_M83): Define for ATmega83, ATmega85.
	(espm): Remove, because ESPM removed in databook update.
	(eicall, eijmp): Move to the end of opcode table.

2000-06-18  Stephane Carrez  <[email protected]>

	* m68hc11.h: New file for support of Motorola 68hc11.

Fri Jun  9 21:51:50 2000  Denis Chertykov  <[email protected]>

	* avr.h: clr,lsl,rol, ... moved after add,adc, ...

Wed Jun  7 21:39:54 2000  Denis Chertykov  <[email protected]>

	* avr.h: New file with AVR opcodes.

Wed Apr 12 17:11:20 2000  Donald Lindsay  <[email protected]>

	* d10v.h: added ALONE attribute for d10v_opcode.exec_type.

2000-05-23  Maciej W. Rozycki  <[email protected]>

	* i386.h: Allow d suffix on iret, and add DefaultSize modifier.

2000-05-17  Maciej W. Rozycki  <[email protected]>

	* i386.h: Use sl_FP, not sl_Suf for fild.

2000-05-16  Frank Ch. Eigler  <[email protected]>

	* cgen.h (CGEN_MAX_SYNTAX_BYTES): Increase to 32.  Check that
	it exceeds CGEN_ACTUAL_MAX_SYNTAX_BYTES, if set.
	(CGEN_MAX_IFMT_OPERANDS): Increase to 16.  Check that it exceeds
	CGEN_ACTUAL_MAX_IFMT_OPERANDS, if set.

2000-05-13  Alan Modra  <[email protected]>,

	* i386.h (i386_optab): Cpu686 for sysenter,sysexit,fxsave,fxrestore.

2000-05-13  Alan Modra  <[email protected]>,
	    Alexander Sokolov <[email protected]>

	* i386.h (i386_optab): Add cpu_flags for all instructions.

2000-05-13  Alan Modra  <[email protected]>

	From Gavin Romig-Koch <[email protected]>
	* i386.h (wld_Suf): Define.  Use on pushf, popf, pusha, popa.

2000-05-04  Timothy Wall  <[email protected]>

	* tic54x.h: New.

2000-05-03  J.T. Conklin  <[email protected]>

	* ppc.h (PPC_OPCODE_ALTIVEC): New opcode flag for vector unit.
	(PPC_OPERAND_VR): New operand flag for vector registers.

2000-05-01  Kazu Hirata  <[email protected]>

	* h8300.h (EOP): Add missing initializer.

Fri Apr 21 15:03:37 2000  Jason Eckhardt  <[email protected]>

	* hppa.h (pa_opcodes): New opcodes for PA2.0 wide mode
	forms of ld/st{b,h,w,d} and fld/fst{w,d} (16-bit displacements).
	New operand types l,y,&,fe,fE,fx added to support above forms.
	(pa_opcodes): Replaced usage of 'x' as source/target for
	floating point double-word loads/stores with 'fx'.

Fri Apr 21 13:20:53 2000  Richard Henderson  <[email protected]>
			  David Mosberger  <[email protected]>
			  Timothy Wall <[email protected]>
			  Jim Wilson  <[email protected]>

	* ia64.h: New file.

2000-03-27  Nick Clifton  <[email protected]>

	* d30v.h (SHORT_A1): Fix value.
	(SHORT_AR): Renumber so that it is at the end of the list of short
	instructions, not the end of the list of long instructions.

2000-03-26  Alan Modra  <[email protected]>

	* i386.h: (UNIXWARE_COMPAT): Rename to SYSV386_COMPAT as the
	problem isn't really specific to Unixware.
	(OLDGCC_COMPAT): Define.
	(i386_optab): If !OLDGCC_COMPAT, don't handle fsubp etc. with
	destination %st(0).
	Fix lots of comments.

2000-03-02  J"orn Rennecke <[email protected]>

        * d30v.h:
        (SHORT_B2r, SHORT_B3, SHORT_B3r, SHORT_B3b, SHORT_B3br): Updated.
        (SHORT_D1r, SHORT_D2, SHORT_D2r, SHORT_D2Br, SHORT_U): Updated.
        (SHORT_F, SHORT_AF, SHORT_T, SHORT_A5, SHORT_CMP, SHORT_CMPU): Updated.
        (SHORT_A1, SHORT_AA, SHORT_RA, SHORT_MODINC, SHORT_MODDEC): Updated.
        (SHORT_C1, SHORT_C2, SHORT_UF, SHORT_A2, SHORT_NONE, LONG): Updated.
        (LONG_U, LONG_Ur, LONG_CMP, LONG_M, LONG_M2, LONG_2, LONG_2r): Updated.
        (LONG_2b, LONG_2br, LONG_D, LONG_Dr, LONG_Dbr): Updated.

2000-02-25  Alan Modra  <[email protected]>

	* i386.h (fild, fistp): Change intel d_Suf form to fildd and
	fistpd without suffix.

2000-02-24  Nick Clifton  <[email protected]>

	* cgen.h (cgen_cpu_desc): Rename field 'flags' to
        'signed_overflow_ok_p'.
	Delete prototypes for cgen_set_flags() and cgen_get_flags().

2000-02-24  Andrew Haley  <[email protected]>

	* cgen.h (CGEN_INSN_MACH_HAS_P): New macro.
	(CGEN_CPU_TABLE): flags: new field.
	Add prototypes for new functions.

2000-02-24  Alan Modra  <[email protected]>

	* i386.h: Add some more UNIXWARE_COMPAT comments.

2000-02-23  Linas Vepstas <[email protected]>

	* i370.h: New file.

2000-02-22  Chandra Chavva  <[email protected]>

	* d30v.h (FLAG_NOT_WITH_ADDSUBppp): Redefined as operation
	cannot be combined in parallel with ADD/SUBppp.

2000-02-22  Andrew Haley  <[email protected]>

	* mips.h: (OPCODE_IS_MEMBER): Add comment.

1999-12-30  Andrew Haley  <[email protected]>

	* mips.h (OPCODE_IS_MEMBER): Add gp32 arg, which determines
	whether synthetic opcodes (e.g. move) generate 32-bit or 64-bit
	insns.

2000-01-15  Alan Modra  <[email protected]>

	* i386.h: Qualify intel mode far call and jmp with x_Suf.

1999-12-27  Alan Modra  <[email protected]>

	* i386.h: Add JumpAbsolute qualifier to all non-intel mode
	indirect jumps and calls.  Add FF/3 call for intel mode.

Wed Dec  1 03:05:25 1999  Jeffrey A Law  ([email protected])

	* mn10300.h: Add new operand types.  Add new instruction formats.

Wed Nov 24 20:28:58 1999  Jeffrey A Law  ([email protected])

	* hppa.h (pa_opcodes): Correctly handle immediate for PA2.0 "bb"
	instruction.

1999-11-18  Gavin Romig-Koch  <[email protected]>

	* mips.h (INSN_ISA5): New.

1999-11-01  Gavin Romig-Koch  <[email protected]>

	* mips.h (OPCODE_IS_MEMBER): New.

1999-10-29  Nick Clifton  <[email protected]>

	* d30v.h (SHORT_AR): Define.

1999-10-18  Michael Meissner  <[email protected]>

	* alpha.h (alpha_num_opcodes): Convert to unsigned.
	(alpha_num_operands): Ditto.

Sun Oct 10 01:46:56 1999  Jerry Quinn <[email protected]>

	* hppa.h (pa_opcodes):  Add load and store cache control to
	instructions.  Add ordered access load and store.

	* hppa.h (pa_opcode): Add new entries for addb and addib.

	* hppa.h (pa_opcodes): Fix cmpb and cmpib entries.

	* hppa.h (pa_opcodes):  Add entries for cmpb and cmpib.

Thu Oct  7 00:12:25 MDT 1999	Diego Novillo <[email protected]>

	* d10v.h: Add flag RESTRICTED_NUM3 for imm3 operands.

Thu Sep 23 07:08:38 1999  Jerry Quinn <[email protected]>

	* hppa.h (pa_opcodes): Add "call" and "ret".  Clean up "b", "bve"
	and "be" using completer prefixes.

	* hppa.h (pa_opcodes): Add initializers to silence compiler.

	* hppa.h: Update comments about character usage.

Mon Sep 20 03:55:31 1999  Jeffrey A Law  ([email protected])

	* hppa.h (pa_opcodes): Fix minor thinkos introduced while cleaning
	up the new fstw & bve instructions.

Sun Sep 19 10:40:59 1999  Jeffrey A Law  ([email protected])

	* hppa.h (pa_opcodes): Add remaining PA2.0 integer load/store
	instructions.

	* hppa.h (pa_opcodes): Add remaining PA2.0 FP load/store instructions.

	* hppa.h (pa_opcodes): Add long offset double word load/store
	instructions.

	* hppa.h (pa_opcodes): Add FLAG_STRICT variants of FP loads and
	stores.

	* hppa.h (pa_opcodes): Handle PA2.0 fcnv, fcmp and ftest insns.

	* hppa.h (pa_opcodes): Finish support for PA2.0 "b" instructions.

	* hppa.h (pa_opcodes): Handle PA2.0 "bve" instructions.

	* hppa.h (pa_opcodes): Add new syntax "be" instructions.

	* hppa.h (pa_opcodes): Note use of 'M' and 'L'.

	* hppa.h (pa_opcodes): Add support for "b,l".

	* hppa.h (pa_opcodes): Add support for "b,gate".

Sat Sep 18 11:41:16 1999  Jeffrey A Law  ([email protected])

	* hppa.h (pa_opcodes): Use 'fX' for first register operand
	in xmpyu.

	* hppa.h (pa_opcodes): Fix mask for probe and probei.

	* hppa.h (pa_opcodes): Fix mask for depwi.

Tue Sep  7 13:44:25 1999  Jeffrey A Law  ([email protected])

	* hppa.h (pa_opcodes): Add "addil" variant which has the %r1 as
	an explicit output argument.

Mon Sep  6 04:41:42 1999  Jeffrey A Law  ([email protected])

	* hppa.h: Add strict variants of PA1.0/PA1.1 loads and stores.
	Add a few PA2.0 loads and store variants.

1999-09-04  Steve Chamberlain  <[email protected]>

	* pj.h: New file.

1999-08-29  Alan Modra  <[email protected]>

	* i386.h (i386_regtab): Move %st to top of table, and split off
	other fp reg entries.
	(i386_float_regtab): To here.

Sat Aug 28 00:25:25 1999  Jerry Quinn <[email protected]>

	* hppa.h (pa_opcodes): Replace 'f' by 'v'.  Prefix float register args
	by 'f'.

	* hppa.h (pa_opcodes): Add extrd, extrw, depd, depdi, depw, depwi.
	Add supporting args.

	* hppa.h:  Document new completers and args.
	* hppa.h (pa_opcodes):  Add 64 bit patterns and pa2.0 syntax for uxor,
	uaddcm, dcor, addi, add, sub, subi, shladd, rfi, and probe.  Add pa2.0
	extensions for ssm, rsm, pdtlb, pitlb.  Add performance instructions
	pmenb and pmdis.

	* hppa.h (pa_opcodes):  Add pa2.0 instructions hadd, hshl,
	hshr, hsub, mixh, mixw, permh.

	* hppa.h (pa_opcodes): Change completers in instructions to
	use 'c' prefix.

	* hppa.h (pa_opcodes):  Add popbts, new forms of bb, havg,
	hshladd, hshradd, shrpd, and shrpw instructions.  Update arg comments.

	* hppa.h (pa_opcodes):  Change fmpyfadd, fmpynfadd, fneg,
	fnegabs to use 'I' instead of 'F'.

1999-08-21  Alan Modra  <[email protected]>

	* i386.h: Add AMD athlon instructions, pfnacc, pfpnacc, pswapd.
	Document pf2iw and pi2fw as athlon insns.  Remove pswapw.
	Alphabetically sort PIII insns.

Wed Aug 18 18:14:40 1999  Doug Evans  <[email protected]>

	* cgen.h (CGEN_INSN_MACH_HAS_P): New macro.

Fri Aug  6 09:46:35 1999  Jerry Quinn <[email protected]>

	* hppa.h (pa_opcodes): Add 64 bit versions of or, xor, and,
	and andcm.  Add 32 and 64 bit version of cmpclr, cmpiclr.

	* hppa.h:  Document 64 bit condition completers.

Thu Aug  5 16:56:07 1999  Jerry Quinn <[email protected]>

	* hppa.h (pa_opcodes): Change condition args to use '?' prefix.

1999-08-04  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Add DefaultSize modifier to all insns
	that implicitly modify %esp.  #undef d_Suf, x_suf, sld_suf,
	sldx_suf, bwld_Suf, d_FP, x_FP, sld_FP, sldx_FP at end of table.

Wed Jul 28 02:04:24 1999  Jerry Quinn <[email protected]>
			  Jeff Law <[email protected]>

	* hppa.h (pa_opcodes): Add "pushnom" and "pushbts".

	* hppa.h (pa_opcodes): Mark all PA2.0 opcodes with FLAG_STRICT.

	* hppa.h (pa_opcodes):  Change xmpyu, fmpyfadd,
	and fmpynfadd to use 'J' and 'K' instead of 'E' and 'X'.

1999-07-13  Alan Modra  <[email protected]>

	* i386.h: Add "undocumented" AMD 3DNow! pf2iw, pi2fw, pswapw insns.

Thu Jul  1 00:17:24 1999  Jeffrey A Law  ([email protected])

	* hppa.h (struct pa_opcode): Add new field "flags".
	(FLAGS_STRICT): Define.

Fri Jun 25 04:22:04 1999  Jerry Quinn <[email protected]>
			  Jeff Law <[email protected]>

	* hppa.h (pa_opcodes): Add pa2.0 clrbts instruction.

	* hppa.h (pa_opcodes): Add entries for mfia and mtsarcm instructions.

1999-06-23  Alan Modra  <[email protected]>

	* i386.h: Allow `l' suffix on bswap.  Allow `w' suffix on arpl,
	lldt, lmsw, ltr, str, verr, verw.  Add FP flag to fcmov*.  Add FP
	flag to fcomi and friends.

Fri May 28 15:26:11 1999  Jeffrey A Law  ([email protected])

	* hppa.h (pa_opcodes): Move integer arithmetic instructions after
	integer logical instructions.

1999-05-28  Linus Nordberg  <[email protected]>

	* m68k.h: Document new formats `E', `G', `H' and new places `N',
	`n', `o'.

	* m68k.h: Define mcf5206e, mcf5307, mcf.  Document new format `u'
	and new places `m', `M', `h'.

Thu May 27 04:13:54 1999  Joel Sherrill ([email protected]

	* hppa.h (pa_opcodes): Add several processor specific system
	instructions.

Wed May 26 16:57:44 1999  Jeffrey A Law  ([email protected])

	* hppa.h (pa_opcodes): Add second entry for "comb", "comib",
	"addb", and "addib" to be used by the disassembler.

1999-05-12  Alan Modra  <[email protected]>

	* i386.h (ReverseModrm): Remove all occurences.
	(InvMem): Add to control/debug/test mov insns, movhlps, movlhps,
	movmskps, pextrw, pmovmskb, maskmovq.
	Change NoSuf to FP on all MMX, XMM and AMD insns as these all
	ignore the data size prefix.

	* i386.h (i386_optab, i386_regtab): Add support for PIII SIMD.
	Mostly stolen from Doug Ledford <[email protected]>

Sat May  8 23:27:35 1999  Richard Henderson  <[email protected]>

	* ppc.h (PPC_OPCODE_64_BRIDGE): New.

1999-04-14  Doug Evans  <[email protected]>

	* cgen.h (CGEN_ATTR): Delete member num_nonbools.
	(CGEN_ATTR_TYPE): Update.
	(CGEN_ATTR_MASK): Number booleans starting at 0.
	(CGEN_ATTR_VALUE): Update.
	(CGEN_INSN_ATTR): Update.

Mon Apr 12 23:43:27 1999  Jeffrey A Law  ([email protected])

	* hppa.h (fmpyfadd, fmpynfadd, fneg, fnegabs): New PA2.0
	instructions.

Tue Mar 23 11:24:38 1999  Jeffrey A Law  ([email protected])

	* hppa.h (bb, bvb): Tweak opcode/mask.


1999-03-22  Doug Evans  <[email protected]>

	* cgen.h (CGEN_ISA,CGEN_MACH): New typedefs.
	(struct cgen_cpu_desc): Rename member mach to machs.  New member isas.
	New members word_bitsize,default_insn_bitsize,base_insn-bitsize,
	min_insn_bitsize,max_insn_bitsize,isa_table,mach_table,rebuild_tables.
	Delete member max_insn_size.
	(enum cgen_cpu_open_arg): New enum.
	(cpu_open): Update prototype.
	(cpu_open_1): Declare.
	(cgen_set_cpu): Delete.

1999-03-11  Doug Evans  <[email protected]>

	* cgen.h (CGEN_HW_TABLE): Delete `num_init_entries' member.
	(CGEN_OPERAND_NIL): New macro.
	(CGEN_OPERAND): New member `type'.
	(@arch@_cgen_operand_table): Delete decl.
	(CGEN_OPERAND_INDEX,CGEN_OPERAND_TYPE,CGEN_OPERAND_ENTRY): Delete.
	(CGEN_OPERAND_TABLE): New struct.
	(cgen_operand_lookup_by_name,cgen_operand_lookup_by_num): Declare.
	(CGEN_OPINST): Pointer to operand table entry replaced with enum.
	(CGEN_CPU_TABLE): New member `isa'.  Change member `operand_table',
	now a CGEN_OPERAND_TABLE.  Add CGEN_CPU_DESC arg to
	{get,set}_{int,vma}_operand.
	(@arch@_cgen_cpu_open): New arg `isa'.
	(cgen_set_cpu): Ditto.

Fri Feb 26 02:36:45 1999  Richard Henderson  <[email protected]>

	* i386.h: Fill in cmov and fcmov alternates.  Add fcomi short forms.

1999-02-25  Doug Evans  <[email protected]>

	* cgen.h (enum cgen_asm_type): Add CGEN_ASM_NONE.
	(CGEN_HW_ENTRY): Delete member `next'.  Change type of `type' to
	enum cgen_hw_type.
	(CGEN_HW_TABLE): New struct.
	(hw_table): Delete declaration.
	(CGEN_OPERAND): Change member hw to hw_type, change type from pointer
	to table entry to enum.
	(CGEN_OPINST): Ditto.
	(CGEN_CPU_TABLE): Change member hw_list to hw_table.

Sat Feb 13 14:13:44 1999  Richard Henderson  <[email protected]>

	* alpha.h (AXP_OPCODE_EV6): New.
	(AXP_OPCODE_NOPAL): Include it.

1999-02-09  Doug Evans  <[email protected]>

	* cgen.h (CGEN_CPU_DESC): Renamed from CGEN_OPCODE_DESC.
	All uses updated.  New members int_insn_p, max_insn_size,
	parse_operand,insert_operand,extract_operand,print_operand,
	sizeof_fields,set_fields_bitsize,get_int_operand,set_int_operand,
	get_vma_operand,set_vma_operand,parse_handlers,insert_handlers,
	extract_handlers,print_handlers.
	(CGEN_ATTR): Change type of num_nonbools to unsigned int.
	(CGEN_ATTR_BOOL_OFFSET): New macro.
	(CGEN_ATTR_MASK): Subtract it to compute bit number.
	(CGEN_ATTR_VALUE): Redo bool/nonbool attr calculation.
	(cgen_opcode_handler): Renamed from cgen_base.
	(CGEN_HW_ATTR_VALUE): Renamed from CGEN_HW_ATTR, all uses updated.
	(CGEN_OPERAND_ATTR_VALUE): Renamed from CGEN_OPERAND_ATTR,
	all uses updated.
	(CGEN_OPERAND_INDEX): Rewrite to use table entry, not global.
	(enum cgen_opinst_type): Renamed from cgen_operand_instance_type.
	(CGEN_IFLD_ATTR_VALUE): Renamed from CGEN_IFLD_ATTR, all uses updated.
	(CGEN_OPCODE,CGEN_IBASE): New types.
	(CGEN_INSN): Rewrite.
	(CGEN_{ASM,DIS}_HASH*): Delete.
	(init_opcode_table,init_ibld_table): Declare.
	(CGEN_INSN_ATTR): New type.

Mon Feb  1 21:09:14 1999  Catherine Moore  <[email protected]>

        * i386.h (d_Suf, x_Suf, sld_Suf, sldx_Suf, bwld_Suf):  Define.
        (x_FP, d_FP, dls_FP, sldx_FP):  Define.
        Change *Suf definitions to include x and d suffixes.
        (movsx):  Use w_Suf and b_Suf.
        (movzx):  Likewise.
        (movs):  Use bwld_Suf.
        (fld):  Change ordering.  Use sld_FP.
        (fild):  Add Intel Syntax equivalent of fildq.
        (fst):  Use sld_FP.
        (fist):  Use sld_FP.
        (fstp):  Use sld_FP.  Add x_FP version.
        (fistp):  LLongMem version for Intel Syntax.
        (fcom, fcomp):  Use sld_FP.
        (fadd, fiadd, fsub):  Use sld_FP.
        (fsubr):  Use sld_FP.
        (fmul, fimul, fdvi, fidiv, fdivr):  Use sld_FP.

1999-01-27  Doug Evans  <[email protected]>

	* cgen.h (enum cgen_mode): Add CGEN_MODE_TARGET_MAX, CGEN_MODE_INT,
	CGEN_MODE_UINT.

1999-01-16  Jeffrey A Law  ([email protected])

	* hppa.h (bv): Fix mask.

1999-01-05  Doug Evans  <[email protected]>

	* cgen.h (CGEN_ATTR_VALUE_TYPE): New typedef.
	(CGEN_ATTR): Use it.
	(CGEN_ATTR_TYPE,CGEN_ATTR_ENTRY): Ditto.
	(CGEN_ATTR_TABLE): New member dfault.

1998-12-30  Gavin Romig-Koch  <[email protected]>

	* mips.h (MIPS16_INSN_BRANCH): New.

Wed Dec  9 10:38:48 1998  David Taylor  <[email protected]>

	The following is part of a change made by Edith Epstein
	<[email protected]> as part of a project to merge in
	changes by HP; HP did not create ChangeLog entries.

	* hppa.h (completer_chars): list of chars to not put a space
	after.

Sun Dec  6 13:21:34 1998  Ian Lance Taylor  <[email protected]>

	* i386.h (i386_optab): Permit w suffix on processor control and
	status word instructions.

1998-11-30  Doug Evans  <[email protected]>

	* cgen.h (struct cgen_hw_entry): Delete const on attrs member.
	(struct cgen_keyword_entry): Ditto.
	(struct cgen_operand): Ditto.
	(CGEN_IFLD): New typedef, with associated access macros.
	(CGEN_IFMT): New typedef, with associated access macros.
	(CGEN_IFMT): Renamed from CGEN_FORMAT.  New member `iflds'.
	(CGEN_IVALUE): New typedef.
	(struct cgen_insn): Delete const on syntax,attrs members.
	`format' now points to format data.  Type of `value' is now
	CGEN_IVALUE.
	(struct cgen_opcode_table): New member ifld_table.

1998-11-18  Doug Evans  <[email protected]>

	* cgen.h (cgen_extract_fn): Update type of `base_insn' arg.
	(CGEN_OPERAND_INSTANCE): New member `attrs'.
	(CGEN_OPERAND_INSTANCE_{ATTRS,ATTR}): New macros.
	(cgen_dis_lookup_insn): Update type of `base_insn' arg.
	(cgen_opcode_table): Update type of dis_hash fn.
	(extract_operand): Update type of `insn_value' arg.

Thu Oct 29 11:38:36 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_VERSION_{MAJOR,MINOR,FIXLEVEL}): Delete.

Tue Oct 27 08:57:59 1998  Gavin Romig-Koch  <[email protected]>

	* mips.h (INSN_MULT): Added.

Tue Oct 20 11:31:34 1998  Alan Modra  <[email protected]>

	* i386.h (MAX_MNEM_SIZE): Rename from MAX_OPCODE_SIZE.

Mon Oct 19 12:50:00 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_INSN_INT): New typedef.
	(CGEN_INT_INSN_P): Renamed from CGEN_INT_INSN.
	(CGEN_INSN_BYTES): Renamed from cgen_insn_t.
	(CGEN_INSN_BYTES_PTR): New typedef.
	(CGEN_EXTRACT_INFO): New typedef.
	(cgen_insert_fn,cgen_extract_fn): Update.
	(cgen_opcode_table): New member `insn_endian'.
	(assemble_insn,lookup_insn,lookup_get_insn_operands): Update.
	(insert_operand,extract_operand): Update.
	(cgen_get_insn_value,cgen_put_insn_value): Add prototypes.

Fri Oct  9 13:38:13 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_ATTR_BOOLS): New macro.
	(struct CGEN_HW_ENTRY): New member `attrs'.
	(CGEN_HW_ATTR): New macro.
	(struct CGEN_OPERAND_INSTANCE): New member `name'.
	(CGEN_INSN_INVALID_P): New macro.

Mon Oct  5 00:21:07 1998  Jeffrey A Law  ([email protected])

	* hppa.h: Add "fid".

Sun Oct  4 21:00:00 1998  Alan Modra  <[email protected]>

	From Robert Andrew Dale <[email protected]>
	* i386.h (i386_optab): Add AMD 3DNow! instructions.
	(AMD_3DNOW_OPCODE): Define.

Tue Sep 22 17:53:47 1998  Nick Clifton  <[email protected]>

	* d30v.h (EITHER_BUT_PREFER_MU): Define.

Mon Aug 10 14:09:38 1998  Doug Evans  <[email protected]>

	* cgen.h (cgen_insn): #if 0 out element `cdx'.

Mon Aug  3 12:21:57 1998  Doug Evans  <[email protected]>

	Move all global state data into opcode table struct, and treat
	opcode table as something that is "opened/closed".
	* cgen.h (CGEN_OPCODE_DESC): New type.
	(all fns): New first arg of opcode table descriptor.
	(cgen_set_parse_operand_fn): Add prototype.
	(cgen_current_machine,cgen_current_endian): Delete.
	(CGEN_OPCODE_TABLE): New members mach,endian,operand_table,
	parse_operand_fn,asm_hash_table,asm_hash_table_entries,
	dis_hash_table,dis_hash_table_entries.
	(opcode_open,opcode_close): Add prototypes.

	* cgen.h (cgen_insn): New element `cdx'.

Thu Jul 30 21:44:25 1998  Frank Ch. Eigler  <[email protected]>

	* d30v.h (FLAG_LKR): New flag for "left-kills-right" instructions.

Tue Jul 28 10:59:07 1998  Jeffrey A Law  ([email protected])

	* mn10300.h: Add "no_match_operands" field for instructions.
	(MN10300_MAX_OPERANDS): Define.

Fri Jul 24 11:44:24 1998  Doug Evans  <[email protected]>

	* cgen.h (cgen_macro_insn_count): Declare.

Tue Jul 21 13:12:13 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_VERSION_{MAJOR,MINOR,FIXLEVEL}): Define.
	(cgen_insert_fn,cgen_extract_fn): New arg `pc'.
	(get_operand,put_operand): Replaced with get_{int,vma}_operand,
	set_{int,vma}_operand.

Fri Jun 26 11:09:06 1998  Jeffrey A Law  ([email protected])

	* mn10300.h: Add "machine" field for instructions.
	(MN103, AM30): Define machine types.

Fri Jun 19 16:09:09 1998  Alan Modra  <[email protected]>

	* i386.h: Use FP, not sl_Suf, for fxsave and fxrstor.

1998-06-18  Ulrich Drepper  <[email protected]>

	* i386.h: Add support for fxsave, fxrstor, sysenter and sysexit.

Sat Jun 13 11:31:35 1998  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Add general form of aad and aam.  Add ud2a
	and ud2b.
	(i386_regtab): Allow cr0..7, db0..7, dr0..7, tr0..7, not just
	those that happen to be implemented on pentiums.

Tue Jun  9 12:16:01 1998  Alan Modra  <[email protected]>

	* i386.h: Change occurences of Data16 to Size16, Data32 to Size32,
	IgnoreDataSize to IgnoreSize.  Flag address and data size prefixes
	with Size16|IgnoreSize or Size32|IgnoreSize.

Mon Jun  8 12:15:52 1998  Alan Modra  <[email protected]>

	* i386.h (REPNE): Rename to REPNE_PREFIX_OPCODE.
	(REPE): Rename to REPE_PREFIX_OPCODE.
	(i386_regtab_end): Remove.
	(i386_prefixtab, i386_prefixtab_end): Remove.
	(i386_optab): Use NULL as sentinel rather than "" to suit rewrite
	of md_begin.
	(MAX_OPCODE_SIZE): Define.
	(i386_optab_end): Remove.
	(sl_Suf): Define.
	(sl_FP): Use sl_Suf.

	* i386.h (i386_optab): Allow 16 bit displacement for `mov
	mem,acc'.  Combine 16 and 32 bit forms of various insns.  Allow 16
	bit form of ljmp.  Add IsPrefix modifier to prefixes.  Add addr32,
	data32, dword, and adword prefixes.
	(i386_regtab): Add BaseIndex modifier to valid 16 bit base/index
	regs.

Fri Jun  5 23:42:43 1998  Alan Modra  <[email protected]>

	* i386.h (i386_regtab): Remove BaseIndex modifier from esp.

	* i386.h: Allow `l' suffix on fld, fst, fstp, fcom, fcomp with
	register operands, because this is a common idiom.  Flag them with
	a warning.  Allow illegal faddp, fsubp, fsubrp, fmulp, fdivp,
	fdivrp because gcc erroneously generates them.  Also flag with a
	warning.

	* i386.h: Add suffix modifiers to most insns, and tighter operand
	checks in some cases.  Fix a number of UnixWare compatibility
	issues with float insns.  Merge some floating point opcodes, using
	new FloatMF modifier.
	(WORD_PREFIX_OPCODE): Rename to DATA_PREFIX_OPCODE for
	consistency.

	* i386.h: Change occurence of ShortformW to W|ShortForm.  Add
	IgnoreDataSize where appropriate.

Wed Jun  3 18:28:45 1998  Alan Modra  <[email protected]>

	* i386.h: (one_byte_segment_defaults): Remove.
	(two_byte_segment_defaults): Remove.
	(i386_regtab): Add BaseIndex to 32 bit regs reg_type.

Fri May 15 15:59:04 1998  Doug Evans  <[email protected]>

	* cgen.h (cgen_hw_lookup_by_name): Renamed from cgen_hw_lookup.
	(cgen_hw_lookup_by_num): Declare.

Thu May  7 09:27:58 1998  Frank Ch. Eigler  <[email protected]>

	* mips.h (OP_{SH,MASK}_CODE2): Added "q" operand format for lower
	ten bits of MIPS ISA1 "break" instruction, and for "sdbbp"

Thu May  7 02:14:08 1998  Doug Evans  <[email protected]>

	* cgen.h (cgen_asm_init_parse): Delete.
	(cgen_save_fixups,cgen_restore_fixups,cgen_swap_fixups): Delete.
	(cgen_asm_record_register,cgen_asm_finish_insn): Delete.

Mon Apr 27 10:13:11 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_ATTR_TYPE): Delete `const', moved to uses.
	(cgen_asm_finish_insn): Update prototype.
	(cgen_insn): New members num, data.
	(CGEN_INSN_TABLE): Members asm_hash, asm_hash_table_size,
	dis_hash, dis_hash_table_size moved to ...
	(CGEN_OPCODE_TABLE).  Here.  Renamed from CGEN_OPCODE_DATA.
	All uses updated.  New members asm_hash_p, dis_hash_p.
	(CGEN_MINSN_EXPANSION): New struct.
	(cgen_expand_macro_insn): Declare.
	(cgen_macro_insn_count): Declare.
	(get_insn_operands): Update prototype.
	(lookup_get_insn_operands): Declare.

Tue Apr 21 17:11:32 1998  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Change iclrKludge and imulKludge to
	regKludge.  Add operands types for string instructions.

Mon Apr 20 14:40:29 1998  Tom Tromey  <[email protected]>

	* i386.h (X): Renamed from `Z_' to preserve formatting of opcode
	table.

Sun Apr 19 13:54:06 1998  Tom Tromey  <[email protected]>

	* i386.h (Z_): Renamed from `_' to avoid clash with common alias
	for `gettext'.

Fri Apr  3 12:04:48 1998  Alan Modra  <[email protected]>

	* i386.h: Remove NoModrm flag from all insns: it's never checked.
	Add IsString flag to string instructions.
	(IS_STRING): Don't define.
	(LOCK_PREFIX_OPCODE, CS_PREFIX_OPCODE, DS_PREFIX_OPCODE): Define.
	(ES_PREFIX_OPCODE, FS_PREFIX_OPCODE, GS_PREFIX_OPCODE): Define.
	(SS_PREFIX_OPCODE): Define.

Mon Mar 30 21:31:56 1998  Ian Lance Taylor  <[email protected]>

	* i386.h: Revert March 24 patch; no more LinearAddress.

Mon Mar 30 10:25:54 1998  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Remove fwait (9b) from all floating point
	instructions, and instead add FWait opcode modifier.  Add short
	form of fldenv and fstenv.
	(FWAIT_OPCODE): Define.

	* i386.h (i386_optab): Change second operand constraint of `mov
	sreg,reg|mem' instruction from Reg16|Mem to WordReg|WordMem to
	allow legal instructions such as `movl %gs,%esi'

Fri Mar 27 18:30:52 1998  Ian Lance Taylor  <[email protected]>

	* h8300.h: Various changes to fully bracket initializers.

Tue Mar 24 18:32:47 1998  H.J. Lu  <[email protected]>

	* i386.h: Set LinearAddress for lidt and lgdt.

Mon Mar  2 10:44:07 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_BOOL_ATTR): New macro.

Thu Feb 26 15:54:31 1998  Michael Meissner  <[email protected]>

	* d30v.h (FLAG_DELAY): New flag for delayed branches/jumps.

Mon Feb 23 10:38:21 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_CAT3): Delete.  Use CONCAT3 now.
	(cgen_insn): Record syntax and format entries here, rather than
	separately.

Tue Feb 17 21:42:56 1998  Nick Clifton  <[email protected]>

	* cgen.h (CGEN_SYNTAX_MAKE_FIELD): New macro.

Tue Feb 17 16:00:56 1998  Doug Evans  <[email protected]>

	* cgen.h (cgen_insert_fn): Change type of result to const char *.
	(cgen_parse_{signed,unsigned}_integer): Delete min,max arguments.
	(CGEN_{INSN,KEYWORD,OPERAND}_NBOOL_ATTRS): Renamed from ..._MAX_ATTRS.

Thu Feb 12 18:30:41 1998  Doug Evans  <[email protected]>

	* cgen.h (lookup_insn): New argument alias_p.

Thu Feb 12 03:41:00 1998  J"orn Rennecke  <[email protected]>

Fix rac to accept only a0:
	* d10v.h (OPERAND_ACC): Split into:
	(OPERAND_ACC0, OPERAND_ACC1) .
	(OPERAND_GPR): Define.

Wed Feb 11 17:31:53 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_FIELDS): Define here.
	(CGEN_HW_ENTRY): New member `type'.
	(hw_list): Delete decl.
	(enum cgen_mode): Declare.
	(CGEN_OPERAND): New member `hw'.
	(enum cgen_operand_instance_type): Declare.
	(CGEN_OPERAND_INSTANCE): New type.
	(CGEN_INSN): New member `operands'.
	(CGEN_OPCODE_DATA): Make hw_list const.
	(get_insn_operands,lookup_insn): Add prototypes for.

Tue Feb  3 17:11:23 1998  Doug Evans  <[email protected]>

	* cgen.h (CGEN_INSN_MAX_ATTRS): Renamed from CGEN_MAX_INSN_ATTRS.
	(CGEN_HW_ENTRY): Move `next' entry to end of struct.
	(CGEN_KEYWORD_MAX_ATTRS): Renamed from CGEN_MAX_KEYWORD_ATTRS.
	(CGEN_OPERAND_MAX_ATTRS): Renamed from CGEN_MAX_OPERAND_ATTRS.

Mon Feb  2 19:19:15 1998  Ian Lance Taylor  <[email protected]>

	* cgen.h: Correct typo in comment end marker.

Mon Feb  2 17:10:38 1998  Steve Haworth  <[email protected]>

	* tic30.h: New file.

Thu Jan 22 17:54:56 1998  Nick Clifton  <[email protected]>

	* cgen.h: Add prototypes for cgen_save_fixups(),
	cgen_restore_fixups(), and cgen_swap_fixups().  Change prototype
	of cgen_asm_finish_insn() to return a char *.

Wed Jan 14 17:21:43 1998  Nick Clifton  <[email protected]>

	* cgen.h: Formatting changes to improve readability.

Mon Jan 12 11:37:36 1998  Doug Evans  <[email protected]>

	* cgen.h (*): Clean up pass over `struct foo' usage.
	(CGEN_ATTR): Make unsigned char.
	(CGEN_ATTR_TYPE): Update.
	(CGEN_ATTR_{ENTRY,TABLE}): New types.
	(cgen_base): Move member `attrs' to cgen_insn.
	(CGEN_KEYWORD): New member `null_entry'.
	(CGEN_{SYNTAX,FORMAT}): New types.
	(cgen_insn): Format and syntax separated from each other.

Tue Dec 16 15:15:52 1997  Michael Meissner  <[email protected]>

	* d30v.h (d30v_opcode): Reorder flags somewhat, add new flags for
	2 word load/store, ADDppp/SUBppp, 16/32 bit multiply.  Make
	flags_{used,set} long.
	(d30v_operand): Make flags field long.

Mon Dec  1 12:24:44 1997  Andreas Schwab  <[email protected]>

	* m68k.h: Fix comment describing operand types.

Sun Nov 23 22:31:27 1997  Michael Meissner  <[email protected]>

	* d30v.h (SHORT_CMPU): Add case for cmpu instruction, and move
	everything else after down.

Tue Nov 18 18:45:14 1997  J"orn Rennecke  <[email protected]>

	* d10v.h (OPERAND_FLAG): Split into:
	(OPERAND_FFLAG, OPERAND_CFLAG) .

Thu Nov 13 11:04:24 1997  Gavin Koch  <[email protected]>

	* mips.h (struct mips_opcode): Changed comments to reflect new
	field usage.

Fri Oct 24 22:36:20 1997  Ken Raeburn  <[email protected]>

	* mips.h: Added to comments a quick-ref list of all assigned
	operand type characters.
	(OP_{MASK,SH}_PERFREG): New macros.

Wed Oct 22 17:28:33 1997  Richard Henderson  <[email protected]>

	* sparc.h: Add '_' and '/' for v9a asr's.
	Patch from David Miller <[email protected]>

Tue Oct 14 13:22:29 1997  Jeffrey A Law  ([email protected])

	* h8300.h: Bit ops with absolute addresses not in the 8 bit
	area are not available in the base model (H8/300).

Thu Sep 25 13:03:41 1997  Ian Lance Taylor  <[email protected]>

	* m68k.h: Remove documentation of ` operand specifier.

Wed Sep 24 19:00:34 1997  Ian Lance Taylor  <[email protected]>

	* m68k.h: Document q and v operand specifiers.

Mon Sep 15 18:28:37 1997  Nick Clifton  <[email protected]>

	* v850.h (struct v850_opcode): Add processors field.
	(PROCESSOR_V850, PROCESSOR_ALL): New bit constants.
	(PROCESSOR_V850E, PROCESSOR_NOT_V850): New bit constants.
	(PROCESSOR_V850EA): New bit constants.

Mon Sep 15 11:29:43 1997  Ken Raeburn  <[email protected]>

	Merge changes from Martin Hunt:

	* d30v.h: Allow up to 64 control registers. Add
	SHORT_A5S format.

	* d30v.h (LONG_Db): New form for delayed branches.

	* d30v.h: (LONG_Db): New form for repeati.

	* d30v.h (SHORT_D2B): New form.

	* d30v.h (SHORT_A2): New form.

	* d30v.h (OPERAND_2REG): Add new operand to indicate 2
	registers are used.  Needed for VLIW optimization.

Mon Sep  8 14:05:45 1997  Doug Evans  <[email protected]>

	* cgen.h: Move assembler interface section
	up so cgen_parse_operand_result is defined for cgen_parse_address.
	(cgen_parse_address): Update prototype.

Tue Sep  2 15:32:32 1997  Nick Clifton  <[email protected]>

	* v850.h (V850_OPREAND_ADJUST_SHORT_MEMORY): Removed.

Tue Aug 26 12:21:52 1997  Ian Lance Taylor  <[email protected]>

	* i386.h (two_byte_segment_defaults): Correct base register 5 in
	modes 1 and 2 to be ss rather than ds.  From Gabriel Paubert
	<[email protected]>.

	* i386.h: Set ud2 to 0x0f0b.  From Gabriel Paubert
	<[email protected]>.

	* i386.h: Comment fixes for ficom[p]?{s,l} from Gabriel Paubert
	<[email protected]>.

	* i386.h (JUMP_ON_CX_ZERO): Uncomment (define again).
	(JUMP_ON_ECX_ZERO): Remove commented out macro.

Fri Aug 22 10:38:29 1997  Nick Clifton  <[email protected]>

	* v850.h (V850_NOT_R0): New flag.

Mon Aug 18 11:05:58 1997  Nick Clifton  <[email protected]>

	* v850.h (struct v850_opcode): Remove flags field.

Wed Aug 13 18:45:48 1997  Nick Clifton  <[email protected]>

	* v850.h (struct v850_opcode): Add flags field.
	(struct v850_operand): Extend meaning of 'bits' and 'shift'
	fields.
	(V850E_INSTRUCTION, V850EA_INSTRUCTION): New flags.
	(V850E_PUSH_POP, V850E_IMMEDIATE16, V850E_IMMEDIATE32): New flags.

Fri Aug  8 16:58:42 1997  Doug Evans  <[email protected]>

	* arc.h: New file.

Thu Jul 24 21:16:58 1997  Doug Evans  <[email protected]>

	* sparc.h (sparc_opcodes): Declare as const.

Thu Jul 10 12:53:25 1997  Jeffrey A Law  ([email protected])

	* mips.h (FP_S, FP_D): Define.  Bitmasks indicating if an insn
	uses single or double precision floating point resources.
	(INSN_NO_ISA, INSN_ISA1): Define.
	(cpu specific INSN macros): Tweak into bitmasks outside the range
	of INSN_ISA field.

Mon Jun 16 14:10:00 1997  H.J. Lu  <[email protected]>

	* i386.h: Fix pand opcode.

Mon Jun  2 11:35:09 1997  Gavin Koch  <[email protected]>

	* mips.h: Widen INSN_ISA and move it to a more convenient
	bit position.  Add INSN_3900.

Tue May 20 11:25:29 1997  Gavin Koch  <[email protected]>

	* mips.h (struct mips_opcode): added new field membership.

Mon May 12 16:26:50 1997  H.J. Lu  <[email protected]>

	* i386.h (movd): only Reg32 is allowed.

	* i386.h: add fcomp and ud2.  From Wayne Scott
	<[email protected]>.

Mon May  5 17:16:21 1997  Ian Lance Taylor  <[email protected]>

	* i386.h: Add MMX instructions.

Mon May  5 12:45:19 1997  H.J. Lu  <[email protected]>

	* i386.h: Remove W modifier from conditional move instructions.

Mon Apr 14 14:56:58 1997  Ian Lance Taylor  <[email protected]>

	* i386.h: Change the opcodes for fsubp, fsubrp, fdivp, and fdivrp
	with no arguments to match that generated by the UnixWare
	assembler.

Thu Apr 10 14:35:00 1997  Doug Evans  <[email protected]>

	* cgen.h (<cpu>_cgen_assemble_insn): New arg for errmsg.
	(cgen_parse_operand_fn): Declare.
	(cgen_init_parse_operand): Declare.
	(cgen_parse_operand): Renamed from cgen_asm_parse_operand,
	new argument `want'.
	(enum cgen_parse_operand_result): Renamed from cgen_asm_result.
	(enum cgen_parse_operand_type): New enum.

Sat Apr  5 13:14:05 1997  Ian Lance Taylor  <[email protected]>

	* i386.h: Revert last patch for the NON_BROKEN_OPCODES cases.

Fri Apr  4 11:46:11 1997  Doug Evans  <[email protected]>

	* cgen.h: New file.

Fri Apr  4 14:02:32 1997  Ian Lance Taylor  <[email protected]>

	* i386.h: Correct opcode values for fsubp, fsubrp, fdivp, and
	fdivrp.

Tue Mar 25 22:57:26 1997  Stu Grossman  ([email protected])

	* v850.h (extract):  Make unsigned.

Mon Mar 24 14:38:15 1997  Ian Lance Taylor  <[email protected]>

	* i386.h: Add iclr.

Thu Mar 20 19:49:10 1997  Ian Lance Taylor  <[email protected]>

	* i386.h: Change DW to W for cmpxchg and xadd, since they don't
	take a direction bit.

Sat Mar 15 19:03:29 1997  H.J. Lu  <[email protected]>

	* sparc.h (sparc_opcode_lookup_arch): Use full prototype.

Fri Mar 14 15:22:01 1997  Ian Lance Taylor  <[email protected]>

	* sparc.h: Include <ansidecl.h>.  Update function declarations to
	use prototypes, and to use const when appropriate.

Thu Mar  6 14:18:30 1997  Jeffrey A Law  ([email protected])

	* mn10300.h (MN10300_OPERAND_RELAX): Define.

Mon Feb 24 15:15:56 1997  Martin M. Hunt  <[email protected]>

	* d10v.h: Change pre_defined_registers to
	d10v_predefined_registers and reg_name_cnt to d10v_reg_name_cnt.

Sat Feb 22 21:25:00 1997  Dawn Perchik  <[email protected]>

	* mips.h: Add macros for cop0, cop1 cop2 and cop3.
	Change mips_opcodes from const array to a pointer,
	and change bfd_mips_num_opcodes from const int to int,
	so that we can increase the size of the mips opcodes table
	dynamically.

Fri Feb 21 16:34:18 1997  Martin M. Hunt  <[email protected]>

	* d30v.h (FLAG_X): Remove unused flag.

Tue Feb 18 17:37:20 1997  Martin M. Hunt  <[email protected]>

	* d30v.h: New file.

Fri Feb 14 13:16:15 1997  Fred Fish  <[email protected]>

	* tic80.h (PDS_NAME): Macro to access name field of predefined symbols.
	(PDS_VALUE): Macro to access value field of predefined symbols.
	(tic80_next_predefined_symbol): Add prototype.

Mon Feb 10 10:32:17 1997  Fred Fish  <[email protected]>

	* tic80.h (tic80_symbol_to_value): Change prototype to match
	change in function, added class parameter.

Thu Feb  6 17:30:15 1997  Fred Fish  <[email protected]>

	* tic80.h (TIC80_OPERAND_ENDMASK): Add for flagging TIc80
	endmask fields, which are somewhat weird in that 0 and 32 are
	treated exactly the same.

Thu Jan 30 13:46:18 1997  Fred Fish  <[email protected]>

	* tic80.h: Change all the OPERAND defines to use the form (1 << X)
	rather than a constant that is 2**X.  Reorder them to put bits for
	operands that have symbolic names in the upper bits, so they can
	be packed into an int where the lower bits contain the value that
	corresponds to that symbolic name.
	(predefined_symbo): Add struct.
	(tic80_predefined_symbols): Declare array of translations.
	(tic80_num_predefined_symbols): Declare size of that array.
	(tic80_value_to_symbol): Declare function.
	(tic80_symbol_to_value): Declare function.

Wed Jan 29 09:37:25 1997  Jeffrey A Law  ([email protected])

	* mn10200.h (MN10200_OPERAND_RELAX): Define.

Sat Jan 18 15:18:59 1997  Fred Fish  <[email protected]>

	* tic80.h (TIC80_NO_R0_DEST): Add for opcodes where r0 cannot
	be the destination register.

Thu Jan 16 20:48:55 1997  Fred Fish  <[email protected]>

	* tic80.h (struct tic80_opcode): Change "format" field to "flags".
	(FMT_UNUSED, FMT_SI, FMT_LI, FMT_REG): Delete.
	(TIC80_VECTOR): Define a flag bit for the flags.  This one means
	that the opcode can have two vector instructions in a single
	32 bit word and we have to encode/decode both.

Tue Jan 14 19:37:09 1997  Fred Fish  <[email protected]>

	* tic80.h (TIC80_OPERAND_PCREL): Renamed from
	TIC80_OPERAND_RELATIVE for PC relative.
	(TIC80_OPERAND_BASEREL): New flag bit for register
	base relative.

Mon Jan 13 15:56:38 1997  Fred Fish  <[email protected]>

	* tic80.h (TIC80_OPERAND_FLOAT): Add for floating point operands.

Mon Jan  6 10:51:15 1997  Fred Fish  <[email protected]>

	* tic80.h (TIC80_OPERAND_SCALED): Operand may have optional
	":s" modifier for scaling.

Sun Jan  5 12:12:19 1997  Fred Fish  <[email protected]>

	* tic80.h (TIC80_OPERAND_M_SI): Add operand modifier for ":m".
	(TIC80_OPERAND_M_LI): Ditto

Sat Jan  4 19:02:44 1997  Fred Fish  <[email protected]>

	* tic80.h (TIC80_OPERAND_BITNUM): Renamed from TIC80_OPERAND_CC_SZ.
	(TIC80_OPERAND_CC): New define for condition code operand.
	(TIC80_OPERAND_CR): New define for control register operand.

Fri Jan  3 16:22:23 1997  Fred Fish  <[email protected]>

	* tic80.h (struct tic80_opcode): Name changed.
	(struct tic80_opcode): Remove format field.
	(struct tic80_operand): Add insertion and extraction functions.
	(TIC80_OPERAND_*): Remove old bogus values, start adding new
	correct ones.
	(FMT_*): Ditto.

Tue Dec 31 15:05:41 1996  Michael Meissner  <[email protected]>

	* v850.h (V850_OPERAND_ADJUST_SHORT_MEMORY): New flag to adjust
	type IV instruction offsets.

Fri Dec 27 22:23:10 1996  Fred Fish  <[email protected]>

	* tic80.h: New file.

Wed Dec 18 10:06:31 1996  Jeffrey A Law  ([email protected])

	* mn10200.h (MN10200_OPERAND_NOCHECK): Define.

Sat Dec 14 10:48:31 1996  Fred Fish  <[email protected]>

	* mn10200.h: Fix comment, mn10200_operand not powerpc_operand.
	* mn10300.h: Fix comment, mn10300_operand not powerpc_operand.
	* v850.h: Fix comment, v850_operand not powerpc_operand.

Mon Dec  9 16:45:39 1996  Jeffrey A Law  ([email protected])

	* mn10200.h: Flesh out structures and definitions needed by
	the mn10200 assembler & disassembler.

Tue Nov 26 10:46:56 1996  Ian Lance Taylor  <[email protected]>

	* mips.h: Add mips16 definitions.

Mon Nov 25 17:56:54 1996  J.T. Conklin  <[email protected]>

	* m68k.h: Document new <, >, m, n, o and p operand specifiers.

Wed Nov 20 10:59:41 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (MN10300_OPERAND_PCREL): Define.
	(MN10300_OPERAND_MEMADDR): Define.

Tue Nov 19 13:30:40 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (MN10300_OPERAND_REG_LIST): Define.

Wed Nov  6 13:41:08 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (MN10300_OPERAND_SPLIT): Define.

Tue Nov  5 13:26:12 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (MN10300_OPERAND_EXTENDED): Define.

Mon Nov  4 12:52:48 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (MN10300_OPERAND_REPEATED): Define.

Fri Nov  1 10:31:02 1996  Richard Henderson  <[email protected]>

	* alpha.h: Don't include "bfd.h"; private relocation types are now
	negative to minimize problems with shared libraries.  Organize
	instruction subsets by AMASK extensions and PALcode
	implementation.
	(struct alpha_operand): Move flags slot for better packing.

Tue Oct 29 12:19:10 1996  Jeffrey A Law  ([email protected])

	* v850.h (V850_OPERAND_RELAX): New operand flag.

Thu Oct 10 14:29:11 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (FMT_*): Move operand format definitions
	here.

Tue Oct  8 14:48:07 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (MN10300_OPERAND_PAREN): Define.

Mon Oct  7 16:52:11 1996  Jeffrey A Law  ([email protected])

	* mn10300.h (mn10300_opcode): Add "format" field.
	(MN10300_OPERAND_*): Define.

Thu Oct  3 10:33:46 1996  Jeffrey A Law  ([email protected])

	* mn10x00.h: Delete.
	* mn10200.h, mn10300.h: New files.

Wed Oct  2 21:31:26 1996  Jeffrey A Law  ([email protected])

	* mn10x00.h: New file.

Fri Sep 27 18:26:46 1996  Stu Grossman  ([email protected])

	* v850.h:  Add new flag to indicate this instruction uses a PC
	displacement.

Fri Sep 13 14:58:13 1996  Jeffrey A Law  ([email protected])

	* h8300.h (stmac): Add missing instruction.

Sat Aug 31 16:02:03 1996  Jeffrey A Law  ([email protected])

	* v850.h (v850_opcode): Remove "size" field.  Add "memop"
	field.

Fri Aug 23 10:39:08 1996  Jeffrey A Law  ([email protected])

	* v850.h (V850_OPERAND_EP): Define.

	* v850.h (v850_opcode): Add size field.

Thu Aug 22 16:51:25 1996  J.T. Conklin  <[email protected]>

	* v850.h (v850_operands): Add insert and extract fields, pointers
	to functions used to handle unusual operand encoding.
	(V850_OPERAND_REG, V850_OPERAND_SRG, V850_OPERAND_CC,
	V850_OPERAND_SIGNED): Defined.

Wed Aug 21 17:45:10 1996  J.T. Conklin  <[email protected]>

	* v850.h (v850_operands): Add flags field.
	(OPERAND_REG, OPERAND_NUM): Defined.

Tue Aug 20 14:52:02 1996  J.T. Conklin  <[email protected]>

	* v850.h: New file.

Fri Aug 16 14:44:15 1996  James G. Smith  <[email protected]>

	* mips.h (OP_SH_LOCC, OP_SH_HICC, OP_MASK_CC, OP_SH_COP1NORM,
	OP_MASK_COP1NORM, OP_SH_COP1SPEC, OP_MASK_COP1SPEC,
	OP_MASK_COP1SCLR, OP_MASK_COP1CMP, OP_SH_COP1CMP, OP_SH_FORMAT,
	OP_MASK_FORMAT, OP_SH_TRUE, OP_MASK_TRUE, OP_SH_GE, OP_MASK_GE,
	OP_SH_UNSIGNED, OP_MASK_UNSIGNED, OP_SH_HINT, OP_MASK_HINT):
	Defined.

Fri Aug 16 00:15:15 1996  Jeffrey A Law  ([email protected])

	* hppa.h (pitlb, pitlbe, iitlba, iitlbp, fic, fice): Accept
	a 3 bit space id instead of a 2 bit space id.

Thu Aug 15 13:11:46 1996  Martin M. Hunt  <[email protected]>

	* d10v.h: Add some additional defines to support the
	assembler in determining which operations can be done in parallel.

Tue Aug  6 11:13:22 1996  Jeffrey A Law  ([email protected])

	* h8300.h (SN): Define.
	(eepmov.b): Renamed from "eepmov"
	(nop, bpt, rte, rts, sleep, clrmac): These have no size associated
	with them.

Fri Jul 26 11:47:10 1996  Martin M. Hunt  <[email protected]>

	* d10v.h (OPERAND_SHIFT): New operand flag.

Thu Jul 25 12:06:22 1996  Martin M. Hunt  <[email protected]>

	* d10v.h: Changes for divs, parallel-only instructions, and
	signed numbers.

Mon Jul 22 11:21:15 1996  Martin M. Hunt  <[email protected]>

	* d10v.h (pd_reg): Define. Putting the definition here allows
	the assembler and disassembler to share the same struct.

Mon Jul 22 12:15:25 1996  Ian Lance Taylor  <[email protected]>

	* i960.h (i960_opcodes): "halt" takes an argument.  From Stephen
	Williams <[email protected]>.

Wed Jul 17 14:46:38 1996  Martin M. Hunt  <[email protected]>

	* d10v.h: New file.

Thu Jul 11 12:09:15 1996  Jeffrey A Law  ([email protected])

	* h8300.h (band, bclr): Force high bit of immediate nibble to zero.

Wed Jul  3 14:30:12 1996  J.T. Conklin  <[email protected]>

	* m68k.h (mcf5200): New macro.
	Document names of coldfire control registers.

Tue Jul  2 23:05:45 1996  Jeffrey A Law  ([email protected])

	* h8300.h (SRC_IN_DST): Define.

	* h8300.h (UNOP3): Mark the register operand in this insn
	as a source operand, not a destination operand.
	(SHIFT_2, SHIFT_IMM): Remove.  Eliminate all references.
	(UNOP3): Change SHIFT_IMM to IMM for H8/S bitops.  Mark
	register operand with SRC_IN_DST.

Fri Jun 21 13:52:17 1996  Richard Henderson  <[email protected]>

	* alpha.h: New file.

Thu Jun 20 15:02:57 1996  Ian Lance Taylor  <[email protected]>

	* rs6k.h: Remove obsolete file.

Wed Jun 19 15:29:38 1996  Ian Lance Taylor  <[email protected]>

	* i386.h: Correct opcode values for faddp, fsubp, fsubrp, fmulp,
	fdivp, and fdivrp.  Add ffreep.

Tue Jun 18 16:06:00 1996  Jeffrey A. Law  <[email protected]>

	* h8300.h: Reorder various #defines for readability.
	(ABS32SRC, ABS32DST, DSP32LIST, ABS32LIST, A32LIST): Define.
	(BITOP): Accept additional (unused) argument.  All callers changed.
	(EBITOP): Likewise.
	(O_LAST): Bump.
	(ldc, stc, movb, movw, movl): Use 32bit offsets and absolutes.

	* h8300.h (EXR, SHIFT_2, MACREG, SHIFT_IMM, RDINC): Define.
	(O_TAS, O_CLRMAC, O_LDMAC, O_MAC, O_LDM, O_STM): Define.
	(BITOP, EBITOP): Handle new H8/S addressing modes for
	bit insns.
	(UNOP3): Handle new shift/rotate insns on the H8/S.
	(insns using exr): New instructions.
	(tas, mac, ldmac, clrmac, ldm, stm): New instructions.

Thu May 23 16:56:48 1996  Jeffrey A Law  ([email protected])

	* h8300.h (add.l): Undo Apr 5th change.  The manual I had
	was incorrect.

Mon May  6 23:38:22 1996  Jeffrey A Law  ([email protected])

	* h8300.h (START): Remove.
	(MEMRELAX): Define.  Mark absolute memory operands in mov.b, mov.w
	and mov.l insns that can be relaxed.

Tue Apr 30 18:30:58 1996  Ian Lance Taylor  <[email protected]>

	* i386.h: Remove Abs32 from lcall.

Mon Apr 22 17:09:23 1996  Doug Evans  <[email protected]>

	* sparc.h (SPARC_OPCODE_ARCH_V9_P): New macro.
	(SLCPOP): New macro.
	Mark X,Y opcode letters as in use.

Thu Apr 11 17:28:18 1996  Ian Lance Taylor  <[email protected]>

	* sparc.h (F_FLOAT, F_FBR): Define.

Fri Apr  5 16:55:34 1996  Jeffrey A Law  ([email protected])

	* h8300.h (ABS8MEM): Renamed from ABSMOV.  Remove ABSMOV
	from all insns.
	(ABS8SRC,ABS8DST): Add ABS8MEM.
	(add.l): Fix reg+reg variant.
	(eepmov.w): Renamed from eepmovw.
	(ldc,stc): Fix many cases.

Sun Mar 31 13:30:03 1996  Doug Evans  <[email protected]>

	* sparc.h (SPARC_OPCODE_ARCH_MASK): New macro.

Thu Mar  7 15:08:23 1996  Doug Evans  <[email protected]>

	* sparc.h (O): Mark operand letter as in use.

Tue Feb 20 20:46:21 1996  Doug Evans  <[email protected]>

	* sparc.h (sparc_{encode,decode}_sparclet_cpreg): Declare.
	Mark operand letters uU as in use.

Mon Feb 19 01:59:08 1996  Doug Evans  <[email protected]>

	* sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_SPARCLET.
	(sparc_opcode_arch): Delete member `conflicts'.  Add `supported'.
	(SPARC_OPCODE_SUPPORTED): New macro.
	(SPARC_OPCODE_CONFLICT_P): Rewrite.
	(F_NOTV9): Delete.

Fri Feb 16 12:23:34 1996  Jeffrey A Law  ([email protected])

	* sparc.h (sparc_opcode_lookup_arch) Make return type in
	declaration consistent with return type in definition.

Wed Feb 14 18:14:11 1996  Alan Modra  <[email protected]>

	* i386.h (i386_optab): Remove Data32 from pushf and popf.

Thu Feb  8 14:27:21 1996  James Carlson <[email protected]>

	* i386.h (i386_regtab): Add 80486 test registers.

Mon Feb  5 18:35:46 1996  Ian Lance Taylor  <[email protected]>

	* i960.h (I_HX): Define.
	(i960_opcodes): Add HX instruction.

Mon Jan 29 12:43:39 1996  Ken Raeburn  <[email protected]>

	* i386.h: Fix waiting forms of finit, fstenv, fsave, fstsw, fstcw,
	and fclex.

Wed Jan 24 22:36:59 1996  Doug Evans  <[email protected]>

	* sparc.h (enum sparc_opcode_arch_val): Replaces sparc_architecture.
	(SPARC_OPCODE_CONFLICT_P): Renamed from ARCHITECTURES_CONFLICT_P.
	(bfd_* defines): Delete.
	(sparc_opcode_archs): Replaces architecture_pname.
	(sparc_opcode_lookup_arch): Declare.
	(NUMOPCODES): Delete.

Mon Jan 22 08:24:32 1996  Doug Evans  <[email protected]>

	* sparc.h (enum sparc_architecture): Add v9a.
	(ARCHITECTURES_CONFLICT_P): Update.

Thu Dec 28 13:27:53 1995  John Hassey  <[email protected]>

	* i386.h: Added Pentium Pro instructions.

Thu Nov  2 22:59:22 1995  Ian Lance Taylor  <[email protected]>

	* m68k.h: Document new 'W' operand place.

Tue Oct 24 10:49:10 1995  Jeffrey A Law  ([email protected])

	* hppa.h: Add lci and syncdma instructions.

Mon Oct 23 11:09:16 1995  James G. Smith  <[email protected]>

	* mips.h: Added INSN_4100 flag to mark NEC VR4100 specific
	instructions.

Mon Oct 16 10:28:15 1995  Michael Meissner  <[email protected]>

	* ppc.h (PPC_OPCODE_{COMMON,ANY}): New opcode flags for
	assembler's -mcom and -many switches.

Wed Oct 11 16:56:33 1995  Ken Raeburn  <[email protected]>

	* i386.h: Fix cmpxchg8b extension opcode description.

Thu Oct  5 18:03:36 1995  Ken Raeburn  <[email protected]>

	* i386.h: Add Pentium instructions wrmsr, rdtsc, rdmsr, cmpxchg8b,
	and register cr4.

Tue Sep 19 15:26:43 1995  Ian Lance Taylor  <[email protected]>

	* m68k.h: Change comment: split type P into types 0, 1 and 2.

Wed Aug 30 13:50:55 1995  Doug Evans  <[email protected]>

	* sparc.h (sparc_{encode,decode}_prefetch): Declare.

Tue Aug 29 15:34:58 1995  Doug Evans  <[email protected]>

	* sparc.h (sparc_{encode,decode}_{asi,membar}): Declare.

Wed Aug  2 18:32:19 1995  Ian Lance Taylor  <[email protected]>

	* m68kmri.h: Remove.

	* m68k.h: Move tables into opcodes/m68k-opc.c, leaving just the
	declarations.  Remove F_ALIAS and flag field of struct
	m68k_opcode.  Change arch field of struct m68k_opcode to unsigned
	int.  Make name and args fields of struct m68k_opcode const.

Wed Aug  2 08:16:46 1995  Doug Evans  <[email protected]>

	* sparc.h (F_NOTV9): Define.

Tue Jul 11 14:20:42 1995  Jeff Spiegel  <[email protected]>

	* mips.h (INSN_4010): Define.

Wed Jun 21 18:49:51 1995  Ken Raeburn  <[email protected]>

	* m68k.h (TBL1): Reverse sense of "round" argument in result.

	Changes from Andreas Schwab <[email protected]>:
	* m68k.h: Fix argument descriptions of coprocessor
	instructions to allow only alterable operands where appropriate.
	[!NO_DEFAULT_SIZES]: An omitted size defaults to `w'.
	(m68k_opcode_aliases): Add more aliases.

Fri Apr 14 22:15:34 1995  Ken Raeburn  <[email protected]>

	* m68k.h: Added explcitly short-sized conditional branches, and a
	bunch of aliases (fmov*, ftest*, tdivul) to support gcc's
	svr4-based configurations.

Mon Mar 13 21:30:01 1995  Ken Raeburn  <[email protected]>

	Mon Feb 27 08:36:39 1995  Bryan Ford  <[email protected]>
	* i386.h: added missing Data16/Data32 flags to a few instructions.

Wed Mar  8 15:19:53 1995  Ian Lance Taylor  <[email protected]>

	* mips.h (OP_MASK_FR, OP_SH_FR): Define.
	(OP_MASK_BCC, OP_SH_BCC): Define.
	(OP_MASK_PREFX, OP_SH_PREFX): Define.
	(OP_MASK_CCC, OP_SH_CCC): Define.
	(INSN_READ_FPR_R): Define.
	(INSN_RFE): Delete.

Wed Mar  8 03:13:23 1995  Ken Raeburn  <[email protected]>

	* m68k.h (enum m68k_architecture): Deleted.
	(struct m68k_opcode_alias): New type.
	(m68k_opcodes): Now const.  Deleted opcode aliases with exactly
	matching constraints, values and flags.  As a side effect of this,
	the MOTOROLA_SYNTAX_ONLY and MIT_SYNTAX_ONLY macros, which so far
	as I know were never used, now may need re-examining.
	(numopcodes): Now const.
	(m68k_opcode_aliases, numaliases): New variables.
	(endop): Deleted.
	[DONT_DEFINE_TABLE]: Declare numopcodes, numaliases, and
	m68k_opcode_aliases; update declaration of m68k_opcodes.

Mon Mar  6 10:02:00 1995  Jeff Law  ([email protected])

	* hppa.h (delay_type): Delete unused enumeration.
	(pa_opcode): Replace unused delayed field with an architecture
	field.
	(pa_opcodes): Mark each instruction as either PA1.0 or PA1.1.

Fri Mar  3 16:10:24 1995  Ian Lance Taylor  <[email protected]>

	* mips.h (INSN_ISA4): Define.

Fri Feb 24 19:13:37 1995  Ian Lance Taylor  <[email protected]>

	* mips.h (M_DLA_AB, M_DLI): Define.

Thu Feb 23 17:33:09 1995  Jeff Law  ([email protected])

	* hppa.h (fstwx): Fix single-bit error.

Wed Feb 15 12:19:52 1995  Ian Lance Taylor  <[email protected]>

	* mips.h (M_ULD, M_ULD_A, M_USD, M_USD_A): Define.

Mon Feb  6 10:35:23 1995  J.T. Conklin  <[email protected]>

	* i386.h: added cpuid instruction , and dr[0-7] aliases for the
	  debug registers.  From Charles Hannum ([email protected]).

Mon Feb  6 03:31:54 1995  Ken Raeburn  <[email protected]>

	Changes from Bryan Ford <[email protected]> for 16-bit
	i386 support:
	* i386.h (MOV_AX_DISP32): New macro.
	(i386_optab): Added Data16 and Data32 as needed.  Added "w" forms
	of several call/return instructions.
	(ADDR_PREFIX_OPCODE): New macro.

Mon Jan 23 16:45:43 1995  Ken Raeburn  <[email protected]>

	Sat Jan 21 17:50:38 1995  Pat Rankin  ([email protected])

	* vax.h (struct vot_wot, field `args'):  Make it pointer to const
	char.
	(struct vot, field `name'):  ditto.

Thu Jan 19 14:47:53 1995  Ken Raeburn  <[email protected]>

	* vax.h: Supply and properly group all values in end sentinel.

Tue Jan 17 10:55:30 1995  Ian Lance Taylor  <[email protected]>

	* mips.h (INSN_ISA, INSN_4650): Define.

Wed Oct 19 13:34:17 1994  Ian Lance Taylor  <[email protected]>

	* a29k.h: Add operand type 'I' for `inv' and `iretinv'.  On
	systems with a separate instruction and data cache, such as the
	29040, these instructions take an optional argument.

Wed Sep 14 17:44:20 1994  Ian Lance Taylor  ([email protected])

	* mips.h (INSN_STORE_MEMORY): Correct value to not conflict with
	INSN_TRAP.

Tue Sep  6 11:39:08 1994  Ian Lance Taylor  ([email protected])

	* mips.h (INSN_STORE_MEMORY): Define.

Thu Jul 28 19:28:07 1994  Ken Raeburn  ([email protected])

	* sparc.h: Document new operand type 'x'.

Tue Jul 26 17:48:05 1994  Ken Raeburn  ([email protected])

	* i960.h (I_CX2): New instruction category.  It includes
	instructions available on Cx and Jx processors.
	(I_JX): New instruction category, for JX-only instructions.
	(i960_opcodes): Put eshro and sysctl in I_CX2 category.  Added
	Jx-only instructions, in I_JX category.

Wed Jul 13 18:43:47 1994  Ken Raeburn  ([email protected])

	* ns32k.h (endop): Made pointer const too.

Sun Jul 10 11:01:09 1994  Ian Dall  ([email protected])

	* ns32k.h: Drop Q operand type as there is no correct use
	for it. Add I and Z operand types which allow better checking.

Thu Jul  7 12:34:48 1994  Steve Chamberlain  ([email protected])

	* h8300.h (xor.l) :fix bit pattern.
	(L_2): New size of operand.
	(trapa): Use it.

Fri Jun 10 16:38:11 1994  Ian Lance Taylor  ([email protected])

	* m68k.h: Move "trap" before "tpcc" to change disassembly.

Fri Jun  3 15:57:36 1994  Ken Raeburn  ([email protected])

	* sparc.h: Include v9 definitions.

Thu Jun  2 12:23:17 1994  Ken Raeburn  ([email protected])

	* m68k.h (m68060): Defined.
	(m68040up, mfloat, mmmu): Include it.
	(struct m68k_opcode): Widen `arch' field.
	(m68k_opcodes): Updated for M68060.  Removed comments that were
	instructions commented out by "JF" years ago.

Thu Apr 28 18:31:14 1994  Ken Raeburn  ([email protected])

	* m68k.h (struct m68k_opcode): Shorten `arch' field to 8 bits, and
	add a one-bit `flags' field.
	(F_ALIAS): New macro.

Wed Apr 27 11:29:52 1994  Steve Chamberlain  ([email protected])

	* h8300.h (dec, inc): Get encoding right.

Mon Apr  4 13:12:43 1994  Ian Lance Taylor  ([email protected])

	* ppc.h (struct powerpc_operand): Removed signedp field; just use
	a flag instead.
	(PPC_OPERAND_SIGNED): Define.
	(PPC_OPERAND_SIGNOPT): Define.

Thu Mar 31 19:34:08 1994  Ken Raeburn  ([email protected])

	* i386.h (IS_JUMP_ON_ECX_ZERO, "jcxz" pattern): Operand size
	prefix is 0x66, not 0x67.  Patch from H.J. Lu ([email protected]).

Thu Mar  3 15:51:05 1994  Ken Raeburn  ([email protected])

	* i386.h: Reverse last change.  It'll be handled in gas instead.

Thu Feb 24 15:29:05 1994  Ken Raeburn  ([email protected])

	* i386.h (sar): Disabled the two-operand Imm1 form, since it was
	slower on the 486 and used the implicit shift count despite the
	explicit operand.  The one-operand form is still available to get
	the shorter form with the implicit shift count.

Thu Feb 17 12:27:52 1994  Torbjorn Granlund  ([email protected])

	* hppa.h: Fix typo in fstws arg string.

Wed Feb  9 21:23:52 1994  Ian Lance Taylor  ([email protected])

	* ppc.h (struct powerpc_opcode): Make operands field unsigned.

Mon Feb  7 19:14:58 1994  Ian Lance Taylor  ([email protected])

	* ppc.h (PPC_OPCODE_601): Define.

Fri Feb  4 23:43:50 1994  Jeffrey A. Law  ([email protected])

	* hppa.h (addb): Use '@' for addb and addib pseudo ops.
	(so we can determine valid completers for both addb and addb[tf].)

	* hppa.h (xmpyu): No floating point format specifier for the
	xmpyu instruction.

Fri Feb  4 23:36:52 1994  Ian Lance Taylor  ([email protected])

	* ppc.h (PPC_OPERAND_NEXT): Define.
	(PPC_OPERAND_NEGATIVE): Change value to make room for above.
	(struct powerpc_macro): Define.
	(powerpc_macros, powerpc_num_macros): Declare.

Fri Jan 21 19:13:50 1994  Ian Lance Taylor  ([email protected])

	* ppc.h: New file.  Header file for PowerPC opcode table.

Mon Jan 17 00:14:23 1994  Jeffrey A. Law  ([email protected])

	* hppa.h: More minor template fixes for sfu and copr (to allow
	for easier disassembly).

	* hppa.h: Fix templates for all the sfu and copr instructions.

Wed Dec 15 15:12:42 1993  Ken Raeburn  ([email protected])

	* i386.h (push): Permit Imm16 operand too.

Sat Dec 11 16:14:06 1993  Steve Chamberlain  ([email protected])

	*  h8300.h (andc): Exists in base arch.

Wed Dec  1 12:15:32 1993  Jeffrey A. Law  ([email protected])

	* From Hisashi MINAMINO <[email protected]>
	* hppa.h: #undef NONE to avoid conflict with hiux include files.

Sun Nov 21 22:06:57 1993  Jeffrey A. Law  ([email protected])

	* hppa.h: Add FP quadword store instructions.

Wed Nov 17 17:13:16 1993  Ian Lance Taylor  ([email protected])

	* mips.h: (M_J_A): Added.
	(M_LA): Removed.

Mon Nov  8 12:12:47 1993  Ian Lance Taylor  ([email protected])

	* mips.h (OP_MASK_CACHE, OP_SH_CACHE): Define.  From Ted Lemon
	<[email protected]>.

Sun Nov  7 00:30:11 1993  Jeffrey A. Law  ([email protected])

	* hppa.h: Immediate field in probei instructions is unsigned,
	not low-sign extended.

Wed Nov  3 10:30:00 1993  Jim Kingdon  ([email protected])

	* m88k.h (RRI10MASK): Change from 0xfc00ffe0 to 0xfc00fc00.

Tue Nov  2 12:41:30 1993  Ken Raeburn  ([email protected])

	* i386.h: Add "fxch" without operand.

Mon Nov  1 18:13:03 1993  Ian Lance Taylor  ([email protected])

	* mips.h (M_JAL_1, M_JAL_2, M_JAL_A): Added.

Sat Oct  2 22:26:11 1993  Jeffrey A Law  ([email protected])

	* hppa.h: Add gfw and gfr to the opcode table.

Wed Sep 29 16:23:00 1993  K. Richard Pixley  ([email protected])

	* m88k.h: extended to handle m88110.

Tue Sep 28 19:19:08 1993  Jeffrey A Law  ([email protected])

	* hppa.h (be, ble): Use operand type 'z' to denote absolute branch
	addresses.

Tue Sep 14 14:04:35 1993  Ian Lance Taylor  ([email protected])

	* i960.h (i960_opcodes): Properly bracket initializers.

Mon Sep 13 12:50:52 1993  K. Richard Pixley  ([email protected])

	* m88k.h (BOFLAG): rewrite to avoid nested comment.

Mon Sep 13 15:46:06 1993  Ian Lance Taylor  ([email protected])

	* m68k.h (two): Protect second argument with parentheses.

Fri Sep 10 16:29:47 1993  Ken Raeburn  ([email protected])

	* i386.h (i386_optab): Added new instruction "rsm" (for i386sl).
	Deleted old in/out instructions in "#if 0" section.

Thu Sep  9 17:42:19 1993  Ian Lance Taylor  ([email protected])

	* i386.h (i386_optab): Properly bracket initializers.

Wed Aug 25 13:50:56 1993  Ken Raeburn  ([email protected])

	* hppa.h (pa_opcode): Use '|' for movb and movib insns.  (From
	Jeff Law, [email protected]).

Mon Aug 23 16:55:03 1993  Ken Raeburn  ([email protected])

	* i386.h (lcall): Accept Imm32 operand also.

Mon Aug 23 12:43:11 1993  Ian Lance Taylor  ([email protected])

	* mips.h (M_ABSU): Removed (absolute value of unsigned number??).
	(M_DABS): Added.

Thu Aug 19 15:08:37 1993  Ian Lance Taylor  ([email protected])

	* mips.h (INSN_*): Changed values.  Removed unused definitions.
	Added INSN_COND_BRANCH_LIKELY, INSN_ISA2 and INSN_ISA3.  Split
	INSN_LOAD_DELAY into INSN_LOAD_MEMORY_DELAY and
	INSN_LOAD_COPROC_DELAY.  Split INSN_COPROC_DELAY into
	INSN_COPROC_MOVE_DELAY and INSN_COPROC_MEMORY_DELAY.
	(M_*): Added new values for r6000 and r4000 macros.
	(ANY_DELAY): Removed.

Wed Aug 18 15:37:48 1993  Ian Lance Taylor  ([email protected])

	* mips.h: Added M_LI_S and M_LI_SS.

Tue Aug 17 07:08:08 1993  Steve Chamberlain  ([email protected])

	* h8300.h: Get some rare mov.bs correct.

Thu Aug  5 09:15:17 1993  Jim Kingdon  ([email protected])

	* sparc.h: Don't define const ourself; rely on ansidecl.h having
	been included.

Fri Jul 30 18:41:11 1993  John Gilmore  ([email protected])

	* sparc.h (F_JSR, F_UNBR, F_CONDBR):  Add new flags to mark
	jump instructions, for use in disassemblers.

Thu Jul 22 07:25:27 1993  Ian Lance Taylor  ([email protected])

	* m88k.h: Make bitfields just unsigned, not unsigned long or
	unsigned short.

Wed Jul 21 11:55:31 1993  Jim Kingdon  ([email protected])

	* hppa.h: New argument type 'y'.  Use in various float instructions.

Mon Jul 19 17:17:03 1993  Jim Kingdon  ([email protected])

	* hppa.h (break): First immediate field is unsigned.

	* hppa.h: Add rfir instruction.

Sun Jul 18 16:28:08 1993  Jim Kingdon  ([email protected])

	* mips.h: Split the actual table out into ../../opcodes/mips-opc.c.

Fri Jul 16 09:59:29 1993  Ian Lance Taylor  ([email protected])

	* mips.h: Reworked the hazard information somewhat, and fixed some
	bugs in the instruction hazard descriptions.

Thu Jul 15 12:42:01 1993  Ian Lance Taylor  ([email protected])

	* m88k.h: Corrected a couple of opcodes.

Tue Jul  6 15:17:35 1993  Ian Lance Taylor  ([email protected])

	* mips.h: Replaced with version from Ralph Campbell and OSF.  The
	new version includes instruction hazard information, but is
	otherwise reasonably similar.

Thu Jul  1 20:36:17 1993  Doug Evans  ([email protected])

	* h8300.h: Fix typo in UNOP3 (affected sh[al][lr].l).

Fri Jun 11 18:38:44 1993  Ken Raeburn  ([email protected])

	Patches from Jeff Law, [email protected]:
	* hppa.h: Clean up some of the OLD_TABLE, non-OLD_TABLE braindamage.
	Make the tables be the same for the following instructions:
	"bb", "addb[tf]", "addib[tf]", "add", "add[loc]", "addco",
	"sh[123]add", "sh[123]add[lo]", "sub", "sub[obt]", "sub[bt]o",
	"ds", "comclr", "addi", "addi[ot]", "addito", "subi", "subio",
	"comiclr", "fadd", "fsub", "fmpy", "fdiv", "fsqrt", "fabs",
	"frnd", "fcpy", "fcnvff", "fcnvxf", "fcnvfx", "fcnvfxt",
	"fcmp", and "ftest".

	* hppa.h: Make new and old tables the same for "break", "mtctl",
	"mfctl", "bb", "ssm", "rsm", "xmpyu", "fmpyadd", "fmpysub".
	Fix typo in last patch.  Collapse several #ifdefs into a
	single #ifdef.

	* hppa.h: Delete remaining OLD_TABLE code.  Bring some
	of the comments up-to-date.

	* hppa.h: Update "free list" of letters and update
	comments describing each letter's function.

Thu Jul  8 09:05:26 1993  Doug Evans  ([email protected])

	* h8300.h: Lots of little fixes for the h8/300h.

Tue Jun  8 12:16:03 1993  Steve Chamberlain  ([email protected])

	 Support for H8/300-H
	* h8300.h: Lots of new opcodes.

Fri Jun  4 15:41:37 1993  Steve Chamberlain  ([email protected])

	* h8300.h: checkpoint, includes H8/300-H opcodes.

Thu Jun  3 15:42:59 1993  Stu Grossman  ([email protected])

	* Patches from Jeffrey Law <[email protected]>.
	* hppa.h: Rework single precision FP
	instructions so that they correctly disassemble code
	PA1.1 code.

Thu May 27 19:21:22 1993  Bruce Bauman  ([email protected])

	* i386.h (i386_optab, mov pattern): Remove Mem16 restriction from
	mov to allow instructions like mov ss,xyz(ecx) to assemble.

Tue May 25 00:39:40 1993  Ken Raeburn  ([email protected])

	* hppa.h: Use new version from Utah if OLD_TABLE isn't defined;
	gdb will define it for now.

Mon May 24 15:20:06 1993  Ken Raeburn  ([email protected])

	* sparc.h: Don't end enumerator list with comma.

Fri May 14 15:15:50 1993  Ian Lance Taylor  ([email protected])

	* Based on patches from [email protected] (David Johnson):
	* mips.h (OP_MASK_COPZ, OP_SH_COPZ): Define.
	("bc2t"): Correct typo.
	("[ls]wc[023]"): Use T rather than t.
	("c[0123]"): Define general coprocessor instructions.

Mon May 10 06:02:25 1993  Ken Raeburn  ([email protected])

	* m68k.h: Move split point for gcc compilation more towards
	middle.

Fri Apr  9 13:26:16 1993  Jim Kingdon  ([email protected])

	* rs6k.h: Clean up instructions for primary opcode 19 (many were
	simply wrong, ics, rfi, & rfsvc were missing).
	Add "a" to opr_ext for "bb".  Doc fix.

Thu Mar 18 13:45:31 1993  Per Bothner  ([email protected])

	* i386.h:  486 extensions from John Hassey ([email protected]).
	* mips.h:  Add casts, to suppress warnings about shifting too much.
	* m68k.h:  Document the placement code '9'.

Thu Feb 18 02:03:14 1993  John Gilmore  ([email protected])

	* m68k.h (BREAK_UP_BIG_DECL, AND_OTHER_PART):  Add kludge which
	allows callers to break up the large initialized struct full of
	opcodes into two half-sized ones.  This permits GCC to compile
	this module, since it takes exponential space for initializers.
	(numopcodes, endop):  Revise to use AND_OTHER_PART in size calcs.

Thu Feb  4 02:06:56 1993  John Gilmore  ([email protected])

	* a29k.h:  Remove RCS crud, update GPL to v2, update copyrights.
	* convex.h:  Added, from GDB's convx-opcode.h.  Added CONST to all
	initialized structs in it.

Thu Jan 28 21:32:22 1993  John Gilmore  ([email protected])

	Delta 88 changes inspired by Carl Greco, <[email protected]>:
	* m88k.h (PMEM):  Avoid previous definition from <sys/param.h>.
	(AND):  Change to AND_ to avoid ansidecl.h `AND' conflict.

Sat Jan 23 18:10:49 PST 1993  Ralph Campbell  ([email protected])

	* mips.h: document "i" and "j" operands correctly.

Thu Jan  7 15:58:13 1993  Ian Lance Taylor  ([email protected])

	* mips.h: Removed endianness dependency.

Sun Jan  3 14:13:35 1993  Steve Chamberlain  ([email protected])

	* h8300.h: include info on number of cycles per instruction.

Mon Dec 21 21:29:08 1992  Stu Grossman  (grossman at cygnus.com)

	* hppa.h:  Move handy aliases to the front.  Fix masks for extract
	and deposit instructions.

Sat Dec 12 16:09:48 1992  Ian Lance Taylor  ([email protected])

	* i386.h: accept shld and shrd both with and without the shift
	count argument, which is always %cl.

Fri Nov 27 17:13:18 1992  Ken Raeburn  (raeburn at cygnus.com)

	* i386.h (i386_optab_end, i386_regtab_end): Now const.
	(one_byte_segment_defaults, two_byte_segment_defaults,
	i386_prefixtab_end): Ditto.

Mon Nov 23 10:47:25 1992  Ken Raeburn  ([email protected])

	* vax.h (bb*): Use "v" (bitfield type), not "a" (address operand)
	for operand 2; from John Carr, [email protected].

Wed Nov  4 07:36:49 1992  Ken Raeburn  ([email protected])

	* m68k.h: Define FIXED_SIZE_BRANCH, so bsr and bra instructions
	always use 16-bit offsets.  Makes calculated-size jump tables
	feasible.

Fri Oct 16 22:52:43 1992  Ken Raeburn  ([email protected])

	* i386.h: Fix one-operand forms of in* and out* patterns.

Tue Sep 22 14:08:14 1992  Ken Raeburn  ([email protected])

	* m68k.h: Added CPU32 support.

Tue Sep 22 00:38:41 1992  John Gilmore  ([email protected])

	* mips.h (break):  Disassemble the argument.  Patch from
	[email protected] (Jonathan Stone).

Wed Sep  9 11:25:28 1992  Ian Lance Taylor  ([email protected])

	* m68k.h: merged Motorola and MIT syntax.

Thu Sep  3 09:33:22 1992  Steve Chamberlain  ([email protected])

	* m68k.h (pmove): make the tests less strict, the 68k book is
	wrong.

Tue Aug 25 23:25:19 1992  Ken Raeburn  ([email protected])

	* m68k.h (m68ec030): Defined as alias for 68030.
	(m68k_opcodes): New type characters "3" for 68030 MMU regs and "t"
	for immediate 0-7 added.  Set up some opcodes (ptest, bkpt) to use
	them.  Tightened description of "fmovex" to distinguish it from
	some "pmove" encodings.  Added "pmove" for 68030 MMU regs, cleaned
	up descriptions that claimed versions were available for chips not
	supporting them.  Added "pmovefd".

Mon Aug 24 12:04:51 1992  Steve Chamberlain  ([email protected])

	* m68k.h: fix where the . goes in divull

Wed Aug 19 11:22:24 1992  Ian Lance Taylor  ([email protected])

	* m68k.h: the cas2 instruction is supposed to be written with
	indirection on the last two operands, which can be either data or
	address registers.  Added a new operand type 'r' which accepts
	either register type.  Added new cases for cas2l and cas2w which
	use them.  Corrected masks for cas2 which failed to recognize use
	of address register.

Fri Aug 14 14:20:38 1992  Per Bothner  ([email protected])

	* m68k.h:  Merged in patches (mostly m68040-specific) from
	Colin Smith <[email protected]>.

	* m68k.h:  Merged m68kmri.h and m68k.h (using the former as a
	base).  Also cleaned up duplicates, re-ordered instructions for
	the sake of dis-assembling (so aliases come after standard names).
	* m68kmri.h: Now just defines some macros, and #includes m68k.h.

Wed Aug 12 16:38:15 1992  Steve Chamberlain  ([email protected])

	* m68kmri.h: added various opcodes. Moved jbxx to bxxes. Filled in
	all missing .s

Mon Aug 10 23:22:33 1992  Ken Raeburn  ([email protected])

	* sparc.h: Moved tables to BFD library.

	* i386.h (i386_optab): Add fildq, fistpq aliases used by gcc.

Sun Jun 28 13:29:03 1992  Fred Fish  ([email protected])

	* h8300.h:  Finish filling in all the holes in the opcode table,
	so that the Lucid C compiler can digest this as well...

Fri Jun 26 21:27:17 1992  John Gilmore  (gnu at cygnus.com)

	* i386.h:  Add setc, setnc, addr16, data16, repz, repnz aliases.
	Fix opcodes on various sizes of fild/fist instructions
	(16bit=no suffix, 32bit="l" suffix, 64bit="ll" suffix).
	Use tabs to indent for comments.  Fixes suggested by Minh Tran-Le.

Thu Jun 25 16:13:26 1992  Stu Grossman  (grossman at cygnus.com)

	* h8300.h:  Fill in all the holes in the opcode table so that the
	losing HPUX C compiler can digest this...

Thu Jun 11 12:15:25 1992  John Gilmore  (gnu at cygnus.com)

	* mips.h:  Fix decoding of coprocessor instructions, somewhat.
	(Fix by Eric Anderson, [email protected].)

Thu May 28 11:17:44 1992  Jim Wilson  ([email protected])

	* sparc.h: Add new architecture variant sparclite; add its scan
	and divscc opcodes.  Define ARCHITECTURES_CONFLICT_P macro.

Tue May  5 14:23:27 1992  Per Bothner  ([email protected])

	* mips.h:  Add some more opcode synonyms (from Frank Yellin,
	[email protected]).

Thu Apr 16 18:25:26 1992  Per Bothner  ([email protected])

	* rs6k.h:  New version from IBM (Metin).

Thu Apr  9 00:31:19 1992  Per Bothner  ([email protected])

	* rs6k.h: Fix incorrect extended opcode for instructions `fm'
        and `fd'.  (From [email protected] (Metin G. Ozisik).)

Tue Apr  7 13:38:47 1992  Stu Grossman  (grossman at cygnus.com)

	* rs6k.h:  Move from ../../gdb/rs6k-opcode.h.

Fri Apr  3 11:30:20 1992  Fred Fish  ([email protected])

	* m68k.h (one, two):  Cast macro args to unsigned to suppress
	complaints from compiler and lint about integer overflow during
	shift.

Sun Mar 29 12:22:08 1992  John Gilmore  (gnu at cygnus.com)

	* sparc.h (OP):  Avoid signed overflow when shifting to high order bit.

Fri Mar  6 00:22:38 1992  John Gilmore  (gnu at cygnus.com)

	* mips.h:  Make bitfield layout depend on the HOST compiler,
	not on the TARGET system.

Fri Feb 21 01:29:51 1992  K. Richard Pixley  ([email protected])

	* i386.h: added inb, inw, outb, outw opcodes, added att syntax for
	  scmp, slod, smov, ssca, ssto.  Curtesy Minh Tran-Le
	  <[email protected]>.

Thu Jan 30 07:31:44 1992  Steve Chamberlain  (sac at rtl.cygnus.com)

	* h8300.h: turned op_type enum into #define list

Thu Jan 30 01:07:24 1992  John Gilmore  (gnu at cygnus.com)

	* sparc.h:  Remove "cypress" architecture.  Remove "fitox" and
	similar instructions -- they've been renamed to "fitoq", etc.
	REALLY fix tsubcctv.  Fix "fcmpeq" and "fcmpq" which had wrong
	number of arguments.
	* h8300.h:  Remove extra ; which produces compiler warning.

Tue Jan 28 22:59:22 1992  Stu Grossman  (grossman at cygnus.com)

	* sparc.h:  fix opcode for tsubcctv.

Tue Jan  7 17:19:39 1992  K. Richard Pixley  (rich at cygnus.com)

	* sparc.h: fba and cba are now aliases for fb and cb respectively.

Fri Dec 27 10:55:50 1991  Per Bothner  (bothner at cygnus.com)

	* sparc.h (nop):  Made the 'lose' field be even tighter,
	so only a standard 'nop' is disassembled as a nop.

Sun Dec 22 12:18:18 1991  Michael Tiemann  (tiemann at cygnus.com)

	* sparc.h (nop): Add RD_GO to `lose' so that only %g0 in dest is
	disassembled as a nop.

Wed Dec 18 17:19:44 1991  Stu Grossman  (grossman at cygnus.com)

	* m68k.h, sparc.h:  ANSIfy enums.

Tue Dec 10 00:22:20 1991  K. Richard Pixley  (rich at rtl.cygnus.com)

	* sparc.h: fix a typo.

Sat Nov 30 20:40:51 1991  Steve Chamberlain  (sac at rtl.cygnus.com)

	* a29k.h, arm.h, h8300.h,  i386.h,  i860.h, i960.h , m68k.h,
	m88k.h, mips.h , np1.h, ns32k.h, pn.h, pyr.h, sparc.h, tahoe.h,
	vax.h: Renamed from ../<foo>-opcode.h.


Local Variables:
version-control: never
End: