1DPDK Release 17.02 2================== 3 4.. **Read this first.** 5 6 The text below explains how to update the release notes. 7 8 Use proper spelling, capitalization and punctuation in all sections. 9 10 Variable and config names should be quoted as fixed width text: ``LIKE_THIS``. 11 12 Build the docs and view the output file to ensure the changes are correct:: 13 14 make doc-guides-html 15 16 firefox build/doc/html/guides/rel_notes/release_17_02.html 17 18 19New Features 20------------ 21 22.. This section should contain new features added in this release. Sample format: 23 24 * **Add a title in the past tense with a full stop.** 25 26 Add a short 1-2 sentence description in the past tense. The description 27 should be enough to allow someone scanning the release notes to understand 28 the new feature. 29 30 If the feature adds a lot of sub-features you can use a bullet list like this. 31 32 * Added feature foo to do something. 33 * Enhanced feature bar to do something else. 34 35 Refer to the previous release notes for examples. 36 37 This section is a comment. do not overwrite or remove it. 38 Also, make sure to start the actual text at the margin. 39 ========================================================= 40 41* **Added support for representing buses in EAL** 42 43 The ``rte_bus`` structure was introduced into the EAL. This allows for 44 devices to be represented by buses they are connected to. A new bus can be 45 added to DPDK by extending the ``rte_bus`` structure and implementing the 46 scan and probe functions. Once a new bus is registered using the provided 47 APIs, new devices can be detected and initialized using bus scan and probe 48 callbacks. 49 50 With this change, devices other than PCI or VDEV type can be represented 51 in the DPDK framework. 52 53* **Added generic EAL API for I/O device memory read/write operations.** 54 55 This API introduces 8 bit, 16 bit, 32 bit and 64 bit I/O device 56 memory read/write operations along with "relaxed" versions. 57 58 Weakly-ordered architectures like ARM need an additional I/O barrier for 59 device memory read/write access over PCI bus. By introducing the EAL 60 abstraction for I/O device memory read/write access, the drivers can access 61 I/O device memory in an architecture-agnostic manner. The relaxed version 62 does not have an additional I/O memory barrier, which is useful in accessing 63 the device registers of integrated controllers which is implicitly strongly 64 ordered with respect to memory access. 65 66* **Added generic flow API (rte_flow).** 67 68 This API provides a generic means to configure hardware to match specific 69 ingress or egress traffic, alter its behavior and query related counters 70 according to any number of user-defined rules. 71 72 In order to expose a single interface with an unambiguous behavior that is 73 common to all poll-mode drivers (PMDs) the ``rte_flow`` API is slightly 74 higher-level than the legacy filtering framework, which it encompasses and 75 supersedes (including all functions and filter types) . 76 77 See the :ref:`Generic flow API <Generic_flow_API>` documentation for more 78 information. 79 80* **Added firmware version get API.** 81 82 Added a new function ``rte_eth_dev_fw_version_get()`` to fetch the firmware 83 version for a given device. 84 85* **Added APIs for MACsec offload support to the ixgbe PMD.** 86 87 Six new APIs have been added to the ixgbe PMD for MACsec offload support. 88 The declarations for the APIs can be found in ``rte_pmd_ixgbe.h``. 89 90* **Added I219 NICs support.** 91 92 Added support for I219 Intel 1GbE NICs. 93 94* **Added VF Daemon (VFD) for i40e. - EXPERIMENTAL** 95 96 This is an EXPERIMENTAL feature to enhance the capability of the DPDK PF as 97 many VF management features are not currently supported by the kernel PF 98 driver. Some new private APIs are implemented directly in the PMD without an 99 abstraction layer. They can be used directly by some users who have the 100 need. 101 102 The new APIs to control VFs directly from PF include: 103 104 * Set VF MAC anti-spoofing. 105 * Set VF VLAN anti-spoofing. 106 * Set TX loopback. 107 * Set VF unicast promiscuous mode. 108 * Set VF multicast promiscuous mode. 109 * Set VF MTU. 110 * Get/reset VF stats. 111 * Set VF MAC address. 112 * Set VF VLAN stripping. 113 * Vf VLAN insertion. 114 * Set VF broadcast mode. 115 * Set VF VLAN tag. 116 * Set VF VLAN filter. 117 118 VFD also includes VF to PF mailbox message management from an application. 119 When the PF receives mailbox messages from the VF the PF should call the 120 callback provided by the application to know if they're permitted to be 121 processed. 122 123 As an EXPERIMENTAL feature, please be aware it can be changed or even 124 removed without prior notice. 125 126* **Updated the i40e base driver.** 127 128 Updated the i40e base driver, including the following changes: 129 130 * Replace existing legacy ``memcpy()`` calls with ``i40e_memcpy()`` calls. 131 * Use ``BIT()`` macro instead of bit fields. 132 * Add clear all WoL filters implementation. 133 * Add broadcast promiscuous control per VLAN. 134 * Remove unused ``X722_SUPPORT`` and ``I40E_NDIS_SUPPORT`` macros. 135 136* **Updated the enic driver.** 137 138 * Set new Rx checksum flags in mbufs to indicate unknown, good or bad checksums. 139 * Fix set/remove of MAC addresses. Allow up to 64 addresses per device. 140 * Enable TSO on outer headers. 141 142* **Added Solarflare libefx-based network PMD.** 143 144 Added a new network PMD which supports Solarflare SFN7xxx and SFN8xxx family 145 of 10/40 Gbps adapters. 146 147* **Updated the mlx4 driver.** 148 149 * Addressed a few bugs. 150 151* **Added support for Mellanox ConnectX-5 adapters (mlx5).** 152 153 Added support for Mellanox ConnectX-5 family of 10/25/40/50/100 Gbps 154 adapters to the existing mlx5 PMD. 155 156* **Updated the mlx5 driver.** 157 158 * Improve Tx performance by using vector logic. 159 * Improve RSS balancing when number of queues is not a power of two. 160 * Generic flow API support for Ethernet, IPv4, IPv4, UDP, TCP, VLAN and 161 VXLAN pattern items with DROP and QUEUE actions. 162 * Support for extended statistics. 163 * Addressed several data path bugs. 164 * As of MLNX_OFED 4.0-1.0.1.0, the Toeplitz RSS hash function is not 165 symmetric anymore for consistency with other PMDs. 166 167* **virtio-user with vhost-kernel as another exceptional path.** 168 169 Previously, we upstreamed a virtual device, virtio-user with vhost-user as 170 the backend as a way of enabling IPC (Inter-Process Communication) and user 171 space container networking. 172 173 Virtio-user with vhost-kernel as the backend is a solution for the exception 174 path, such as KNI, which exchanges packets with the kernel networking stack. 175 This solution is very promising in: 176 177 * Maintenance: vhost and vhost-net (kernel) is an upstreamed and extensively 178 used kernel module. 179 * Features: vhost-net is designed to be a networking solution, which has 180 lots of networking related features, like multi-queue, TSO, multi-seg 181 mbuf, etc. 182 * Performance: similar to KNI, this solution would use one or more 183 kthreads to send/receive packets from user space DPDK applications, 184 which has little impact on user space polling thread (except that 185 it might enter into kernel space to wake up those kthreads if 186 necessary). 187 188* **Added virtio Rx interrupt support.** 189 190 Added a feature to enable Rx interrupt mode for virtio pci net devices as 191 bound to VFIO (noiommu mode) and driven by virtio PMD. 192 193 With this feature, the virtio PMD can switch between polling mode and 194 interrupt mode, to achieve best performance, and at the same time save 195 power. It can work on both legacy and modern virtio devices. In this mode, 196 each ``rxq`` is mapped with an excluded MSIx interrupt. 197 198 See the :ref:`Virtio Interrupt Mode <virtio_interrupt_mode>` documentation 199 for more information. 200 201* **Added ARMv8 crypto PMD.** 202 203 A new crypto PMD has been added, which provides combined mode cryptographic 204 operations optimized for ARMv8 processors. The driver can be used to enhance 205 performance in processing chained operations such as cipher + HMAC. 206 207* **Updated the QAT PMD.** 208 209 The QAT PMD has been updated with additional support for: 210 211 * DES algorithm. 212 * Scatter-gather list (SGL) support. 213 214* **Updated the AESNI MB PMD.** 215 216 * The Intel(R) Multi Buffer Crypto for IPsec library used in 217 AESNI MB PMD has been moved to a new repository, in GitHub. 218 * Support has been added for single operations (cipher only and 219 authentication only). 220 221* **Updated the AES-NI GCM PMD.** 222 223 The AES-NI GCM PMD was migrated from the Multi Buffer library to the ISA-L 224 library. The migration entailed adding additional support for: 225 226 * GMAC algorithm. 227 * 256-bit cipher key. 228 * Session-less mode. 229 * Out-of place processing 230 * Scatter-gather support for chained mbufs (only out-of place and destination 231 mbuf must be contiguous) 232 233* **Added crypto performance test application.** 234 235 Added a new performance test application for measuring performance 236 parameters of PMDs available in the crypto tree. 237 238* **Added Elastic Flow Distributor library (rte_efd).** 239 240 Added a new library which uses perfect hashing to determine a target/value 241 for a given incoming flow key. 242 243 The library does not store the key itself for lookup operations, and 244 therefore, lookup performance is not dependent on the key size. Also, the 245 target/value can be any arbitrary value (8 bits by default). Finally, the 246 storage requirement is much smaller than a hash-based flow table and 247 therefore, it can better fit in CPU cache and scale to millions of flow 248 keys. 249 250 See the :ref:`Elastic Flow Distributor Library <Efd_Library>` documentation in 251 the Programmers Guide document, for more information. 252 253 254Resolved Issues 255--------------- 256 257.. This section should contain bug fixes added to the relevant sections. Sample format: 258 259 * **code/section Fixed issue in the past tense with a full stop.** 260 261 Add a short 1-2 sentence description of the resolved issue in the past tense. 262 The title should contain the code/lib section like a commit message. 263 Add the entries in alphabetic order in the relevant sections below. 264 265 This section is a comment. do not overwrite or remove it. 266 Also, make sure to start the actual text at the margin. 267 ========================================================= 268 269Drivers 270~~~~~~~ 271 272* **net/virtio: Fixed multiple process support.** 273 274 Fixed a few regressions introduced in recent releases that break the virtio 275 multiple process support. 276 277 278Examples 279~~~~~~~~ 280 281* **examples/ethtool: Fixed crash with non-PCI devices.** 282 283 Fixed issue where querying a non-PCI device was dereferencing non-existent 284 PCI data resulting in a segmentation fault. 285 286 287 288API Changes 289----------- 290 291.. This section should contain API changes. Sample format: 292 293 * Add a short 1-2 sentence description of the API change. Use fixed width 294 quotes for ``rte_function_names`` or ``rte_struct_names``. Use the past tense. 295 296 This section is a comment. do not overwrite or remove it. 297 Also, make sure to start the actual text at the margin. 298 ========================================================= 299 300* **Moved five APIs for VF management from the ethdev to the ixgbe PMD.** 301 302 The following five APIs for VF management from the PF have been removed from 303 the ethdev, renamed, and added to the ixgbe PMD:: 304 305 rte_eth_dev_set_vf_rate_limit() 306 rte_eth_dev_set_vf_rx() 307 rte_eth_dev_set_vf_rxmode() 308 rte_eth_dev_set_vf_tx() 309 rte_eth_dev_set_vf_vlan_filter() 310 311 The API's have been renamed to the following:: 312 313 rte_pmd_ixgbe_set_vf_rate_limit() 314 rte_pmd_ixgbe_set_vf_rx() 315 rte_pmd_ixgbe_set_vf_rxmode() 316 rte_pmd_ixgbe_set_vf_tx() 317 rte_pmd_ixgbe_set_vf_vlan_filter() 318 319 The declarations for the API’s can be found in ``rte_pmd_ixgbe.h``. 320 321 322ABI Changes 323----------- 324 325.. This section should contain ABI changes. Sample format: 326 327 * Add a short 1-2 sentence description of the ABI change that was announced in 328 the previous releases and made in this release. Use fixed width quotes for 329 ``rte_function_names`` or ``rte_struct_names``. Use the past tense. 330 331 This section is a comment. do not overwrite or remove it. 332 Also, make sure to start the actual text at the margin. 333 ========================================================= 334 335 336 337Shared Library Versions 338----------------------- 339 340.. Update any library version updated in this release and prepend with a ``+`` 341 sign, like this: 342 343 librte_acl.so.2 344 + librte_cfgfile.so.2 345 librte_cmdline.so.2 346 347 This section is a comment. do not overwrite or remove it. 348 ========================================================= 349 350 351The libraries prepended with a plus sign were incremented in this version. 352 353.. code-block:: diff 354 355 librte_acl.so.2 356 librte_cfgfile.so.2 357 librte_cmdline.so.2 358 librte_cryptodev.so.2 359 librte_distributor.so.1 360 librte_eal.so.3 361 + librte_ethdev.so.6 362 librte_hash.so.2 363 librte_ip_frag.so.1 364 librte_jobstats.so.1 365 librte_kni.so.2 366 librte_kvargs.so.1 367 librte_lpm.so.2 368 librte_mbuf.so.2 369 librte_mempool.so.2 370 librte_meter.so.1 371 librte_net.so.1 372 librte_pdump.so.1 373 librte_pipeline.so.3 374 librte_pmd_bond.so.1 375 librte_pmd_ring.so.2 376 librte_port.so.3 377 librte_power.so.1 378 librte_reorder.so.1 379 librte_ring.so.1 380 librte_sched.so.1 381 librte_table.so.2 382 librte_timer.so.1 383 librte_vhost.so.3 384 385 386Tested Platforms 387---------------- 388 389.. This section should contain a list of platforms that were tested with this release. 390 391 The format is: 392 393 * <vendor> platform with <vendor> <type of devices> combinations 394 395 * List of CPU 396 * List of OS 397 * List of devices 398 * Other relevant details... 399 400 This section is a comment. do not overwrite or remove it. 401 Also, make sure to start the actual text at the margin. 402 ========================================================= 403 404This release has been tested with the below list of CPU/device/firmware/OS. 405Each section describes a different set of combinations. 406 407* Intel(R) platforms with Mellanox(R) NICs combinations 408 409 * Platform details 410 411 * Intel(R) Xeon(R) CPU E5-2697 v2 @ 2.70GHz 412 * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz 413 * Intel(R) Xeon(R) CPU E5-2697 v3 @ 2.60GHz 414 415 * OS: 416 417 * CentOS 7.0 418 * Fedora 23 419 * Fedora 24 420 * FreeBSD 10.3 421 * Red Hat Enterprise Linux 7.2 422 * SUSE Enterprise Linux 12 423 * Ubuntu 14.04 LTS 424 * Ubuntu 15.10 425 * Ubuntu 16.04 LTS 426 * Wind River Linux 8 427 428 * MLNX_OFED: 4.0-1.0.1.0 429 430 * NICs: 431 432 * Mellanox(R) ConnectX(R)-3 Pro 40G MCX354A-FCC_Ax (2x40G) 433 434 * Host interface: PCI Express 3.0 x8 435 * Device ID: 15b3:1007 436 * Firmware version: 2.40.5030 437 438 * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G) 439 440 * Host interface: PCI Express 3.0 x8 441 * Device ID: 15b3:1013 442 * Firmware version: 12.18.1000 443 444 * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G) 445 446 * Host interface: PCI Express 3.0 x8 447 * Device ID: 15b3:1013 448 * Firmware version: 12.18.1000 449 450 * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G) 451 452 * Host interface: PCI Express 3.0 x8 453 * Device ID: 15b3:1013 454 * Firmware version: 12.18.1000 455 456 * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G) 457 458 * Host interface: PCI Express 3.0 x8 459 * Device ID: 15b3:1013 460 * Firmware version: 12.18.1000 461 462 * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G) 463 464 * Host interface: PCI Express 3.0 x8 465 * Device ID: 15b3:1013 466 * Firmware version: 12.18.1000 467 468 * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G) 469 470 * Host interface: PCI Express 3.0 x16 471 * Device ID: 15b3:1013 472 * Firmware version: 12.18.1000 473 474 * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G) 475 476 * Host interface: PCI Express 3.0 x8 477 * Device ID: 15b3:1013 478 * Firmware version: 12.18.1000 479 480 * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G) 481 482 * Host interface: PCI Express 3.0 x8 483 * Device ID: 15b3:1013 484 * Firmware version: 12.18.1000 485 486 * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G) 487 488 * Host interface: PCI Express 3.0 x16 489 * Device ID: 15b3:1013 490 * Firmware version: 12.18.1000 491 492 * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G) 493 494 * Host interface: PCI Express 3.0 x16 495 * Device ID: 15b3:1013 496 * Firmware version: 12.18.1000 497 498 * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G) 499 500 * Host interface: PCI Express 3.0 x16 501 * Device ID: 15b3:1013 502 * Firmware version: 12.18.1000 503 504 * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G) 505 506 * Host interface: PCI Express 3.0 x8 507 * Device ID: 15b3:1015 508 * Firmware version: 14.18.1000 509 510 * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) 511 512 * Host interface: PCI Express 3.0 x8 513 * Device ID: 15b3:1015 514 * Firmware version: 14.18.1000 515 516 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) 517 518 * Host interface: PCI Express 3.0 x16 519 * Device ID: 15b3:1017 520 * Firmware version: 16.18.1000 521 522 * Mellanox(R) ConnectX-5 Ex EN 100G MCX516A-CDAT (2x100G) 523 524 * Host interface: PCI Express 4.0 x16 525 * Device ID: 15b3:1019 526 * Firmware version: 16.18.1000 527 528* IBM(R) Power8(R) with Mellanox(R) NICs combinations 529 530 * Machine: 531 532 * Processor: POWER8E (raw), AltiVec supported 533 534 * type-model: 8247-22L 535 * Firmware FW810.21 (SV810_108) 536 537 * OS: Ubuntu 16.04 LTS PPC le 538 539 * MLNX_OFED: 4.0-1.0.1.0 540 541 * NICs: 542 543 * Mellanox(R) ConnectX(R)-4 10G MCX4111A-XCAT (1x10G) 544 545 * Host interface: PCI Express 3.0 x8 546 * Device ID: 15b3:1013 547 * Firmware version: 12.18.1000 548 549 * Mellanox(R) ConnectX(R)-4 10G MCX4121A-XCAT (2x10G) 550 551 * Host interface: PCI Express 3.0 x8 552 * Device ID: 15b3:1013 553 * Firmware version: 12.18.1000 554 555 * Mellanox(R) ConnectX(R)-4 25G MCX4111A-ACAT (1x25G) 556 557 * Host interface: PCI Express 3.0 x8 558 * Device ID: 15b3:1013 559 * Firmware version: 12.18.1000 560 561 * Mellanox(R) ConnectX(R)-4 25G MCX4121A-ACAT (2x25G) 562 563 * Host interface: PCI Express 3.0 x8 564 * Device ID: 15b3:1013 565 * Firmware version: 12.18.1000 566 567 * Mellanox(R) ConnectX(R)-4 40G MCX4131A-BCAT/MCX413A-BCAT (1x40G) 568 569 * Host interface: PCI Express 3.0 x8 570 * Device ID: 15b3:1013 571 * Firmware version: 12.18.1000 572 573 * Mellanox(R) ConnectX(R)-4 40G MCX415A-BCAT (1x40G) 574 575 * Host interface: PCI Express 3.0 x16 576 * Device ID: 15b3:1013 577 * Firmware version: 12.18.1000 578 579 * Mellanox(R) ConnectX(R)-4 50G MCX4131A-GCAT/MCX413A-GCAT (1x50G) 580 581 * Host interface: PCI Express 3.0 x8 582 * Device ID: 15b3:1013 583 * Firmware version: 12.18.1000 584 585 * Mellanox(R) ConnectX(R)-4 50G MCX414A-BCAT (2x50G) 586 587 * Host interface: PCI Express 3.0 x8 588 * Device ID: 15b3:1013 589 * Firmware version: 12.18.1000 590 591 * Mellanox(R) ConnectX(R)-4 50G MCX415A-GCAT/MCX416A-BCAT/MCX416A-GCAT (2x50G) 592 593 * Host interface: PCI Express 3.0 x16 594 * Device ID: 15b3:1013 595 * Firmware version: 12.18.1000 596 597 * Mellanox(R) ConnectX(R)-4 50G MCX415A-CCAT (1x100G) 598 599 * Host interface: PCI Express 3.0 x16 600 * Device ID: 15b3:1013 601 * Firmware version: 12.18.1000 602 603 * Mellanox(R) ConnectX(R)-4 100G MCX416A-CCAT (2x100G) 604 605 * Host interface: PCI Express 3.0 x16 606 * Device ID: 15b3:1013 607 * Firmware version: 12.18.1000 608 609 * Mellanox(R) ConnectX(R)-4 Lx 10G MCX4121A-XCAT (2x10G) 610 611 * Host interface: PCI Express 3.0 x8 612 * Device ID: 15b3:1015 613 * Firmware version: 14.18.1000 614 615 * Mellanox(R) ConnectX(R)-4 Lx 25G MCX4121A-ACAT (2x25G) 616 617 * Host interface: PCI Express 3.0 x8 618 * Device ID: 15b3:1015 619 * Firmware version: 14.18.1000 620 621 * Mellanox(R) ConnectX(R)-5 100G MCX556A-ECAT (2x100G) 622 623 * Host interface: PCI Express 3.0 x16 624 * Device ID: 15b3:1017 625 * Firmware version: 16.18.1000 626 627* Intel(R) platforms with Intel(R) NICs combinations 628 629 * Platform details 630 631 * Intel(R) Atom(TM) CPU C2758 @ 2.40GHz 632 * Intel(R) Xeon(R) CPU D-1540 @ 2.00GHz 633 * Intel(R) Xeon(R) CPU E5-4667 v3 @ 2.00GHz 634 * Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz 635 * Intel(R) Xeon(R) CPU E5-2699 v3 @ 2.30GHz 636 * Intel(R) Xeon(R) CPU E5-2695 v4 @ 2.10GHz 637 * Intel(R) Xeon(R) CPU E5-2658 v2 @ 2.40GHz 638 639 * OS: 640 641 * CentOS 7.2 642 * Fedora 25 643 * FreeBSD 11 644 * Red Hat Enterprise Linux Server release 7.3 645 * SUSE Enterprise Linux 12 646 * Wind River Linux 8 647 * Ubuntu 16.04 648 * Ubuntu 16.10 649 650 * NICs: 651 652 * Intel(R) 82599ES 10 Gigabit Ethernet Controller 653 654 * Firmware version: 0x61bf0001 655 * Device id (pf/vf): 8086:10fb / 8086:10ed 656 * Driver version: 4.0.1-k (ixgbe) 657 658 * Intel(R) Corporation Ethernet Connection X552/X557-AT 10GBASE-T 659 660 * Firmware version: 0x800001cf 661 * Device id (pf/vf): 8086:15ad / 8086:15a8 662 * Driver version: 4.2.5 (ixgbe) 663 664 * Intel(R) Ethernet Converged Network Adapter X710-DA4 (4x10G) 665 666 * Firmware version: 5.05 667 * Device id (pf/vf): 8086:1572 / 8086:154c 668 * Driver version: 1.5.23 (i40e) 669 670 * Intel(R) Ethernet Converged Network Adapter X710-DA2 (2x10G) 671 672 * Firmware version: 5.05 673 * Device id (pf/vf): 8086:1572 / 8086:154c 674 * Driver version: 1.5.23 (i40e) 675 676 * Intel(R) Ethernet Converged Network Adapter XL710-QDA1 (1x40G) 677 678 * Firmware version: 5.05 679 * Device id (pf/vf): 8086:1584 / 8086:154c 680 * Driver version: 1.5.23 (i40e) 681 682 * Intel(R) Ethernet Converged Network Adapter XL710-QDA2 (2X40G) 683 684 * Firmware version: 5.05 685 * Device id (pf/vf): 8086:1583 / 8086:154c 686 * Driver version: 1.5.23 (i40e) 687 688 * Intel(R) Corporation I350 Gigabit Network Connection 689 690 * Firmware version: 1.48, 0x800006e7 691 * Device id (pf/vf): 8086:1521 / 8086:1520 692 * Driver version: 5.2.13-k (igb) 693