1# Launch F-Stack on AWS EC2 in one minute
2
3  If you have a Redhat7.3 EC2 instance，and then execute the following cmds, you will get the F-Stack server in one minute
4
5    sudo -i
6    yum install -y git gcc openssl-devel kernel-devel-$(uname -r) bc
7
8    mkdir /data/f-stack
9    git clone https://github.com/F-Stack/f-stack.git /data/f-stack
10
11    # Compile DPDK
12    cd /data/f-stack/dpdk
13    make config T=x86_64-native-linuxapp-gcc
14    make
15
16    # set hugepage
17    echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
18    mkdir /mnt/huge
19    mount -t hugetlbfs nodev /mnt/huge
20
21    # insmod ko
22    modprobe uio
23    modprobe hwmon
24    insmod build/kmod/igb_uio.ko
25    insmod build/kmod/rte_kni.ko
26
27    # set ip address
28    #redhat7.3
29    export myaddr=`ifconfig eth0 | grep "inet" | grep -v ":" | awk -F ' '  '{print $2}'`
30    export mymask=`ifconfig eth0 | grep "netmask" | awk -F ' ' '{print $4}'`
31    export mybc=`ifconfig eth0 | grep "broadcast" | awk -F ' ' '{print $6}'`
32    export myhw=`ifconfig eth0 | grep "ether" | awk -F ' ' '{print $2}'`
33    export mygw=`route -n | grep 0.0.0.0 | grep eth0 | grep UG | awk -F ' ' '{print $2}'`
34    #Amazon Linux AMI 2017.03
35    #export myaddr=`ifconfig eth0 | grep "inet addr" | awk -F ' '  '{print $2}' |  awk -F ':' '{print $2}'`
36    #export mymask=`ifconfig eth0 | grep "Mask" | awk -F ' ' '{print $4}' |  awk -F ':' '{print $2}'`
37    #export mybc=`ifconfig eth0 | grep "Bcast" | awk -F ' ' '{print $3}' |  awk -F ':' '{print $2}'`
38    #export myhw=`ifconfig eth0 | grep "HWaddr" | awk -F ' ' '{print $5}'`
39    #export mygw=`route -n | grep 0.0.0.0 | grep eth0 | grep UG | awk -F ' ' '{print $2}'
40
41    sed "s/addr=192.168.1.2/addr=${myaddr}/" -i /data/f-stack/config.ini
42    sed "s/netmask=255.255.255.0/netmask=${mymask}/" -i /data/f-stack/config.ini
43    sed "s/broadcast=192.168.1.255/broadcast=${mybc}/" -i /data/f-stack/config.ini
44    sed "s/gateway=192.168.1.1/gateway=${mygw}/" -i /data/f-stack/config.ini
45
46    # enable kni
47    sed "s/#\[kni\]/\[kni\]/" -i /data/f-stack/config.ini
48    sed "s/#enable=1/enable=1/" -i /data/f-stack/config.ini
49    sed "s/#method=reject/method=reject/" -i /data/f-stack/config.ini
50    sed "s/#tcp_port=80/tcp_port=80/" -i /data/f-stack/config.ini
51    sed "s/#vlanstrip=1/vlanstrip=1/" -i /data/f-stack/config.ini
52
53
54    # Compile F-Stack lib
55    export FF_PATH=/data/f-stack
56    export FF_DPDK=/data/f-stack/dpdk/build
57    cd /data/f-stack/lib
58    make
59
60    # Compile Nginx
61    cd ../app/nginx-1.11.10
62    ./configure --prefix=/usr/local/nginx_fstack --with-ff_module
63    make
64    make install
65
66    # offload NIC
67    ifconfig eth0 down
68    python /data/f-stack/dpdk/tools/dpdk-devbind.py --bind=igb_uio eth0
69
70    # start Nginx
71    cd ../..
72    ./start.sh -b /usr/local/nginx_fstack/sbin/nginx -c config.ini
73
74    # start kni
75    sleep 30
76    ifconfig veth0 ${myaddr}  netmask ${mymask}  broadcast ${mybc} hw ether ${myhw}
77    route add -net 0.0.0.0 gw ${mygw} dev veth0