1# Launch F-Stack on AWS EC2 in one minute
2
3  If you have a Redhat7.3 EC2 instance，and then execute the following cmds, you will get the F-Stack server in one minute
4
5    sudo -i
6    yum install -y git gcc openssl-devel kernel-devel-$(uname -r) bc
7
8    mkdir /data/f-stack
9    git clone https://github.com/F-Stack/f-stack.git /data/f-stack
10
11    # Compile DPDK
12    cd /data/f-stack/dpdk
13    make config T=x86_64-native-linuxapp-gcc
14    make
15
16    # set hugepage
17    echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
18    mkdir /mnt/huge
19    mount -t hugetlbfs nodev /mnt/huge
20
21    # close ASLR; it is necessary in multiple process
22    echo 0 > /proc/sys/kernel/randomize_va_space
23
24    # insmod ko
25    modprobe uio
26    modprobe hwmon
27    insmod build/kmod/igb_uio.ko
28    insmod build/kmod/rte_kni.ko
29
30    # set ip address
31    #redhat7.3
32    export myaddr=`ifconfig eth0 | grep "inet" | grep -v ":" | awk -F ' '  '{print $2}'`
33    export mymask=`ifconfig eth0 | grep "netmask" | awk -F ' ' '{print $4}'`
34    export mybc=`ifconfig eth0 | grep "broadcast" | awk -F ' ' '{print $6}'`
35    export myhw=`ifconfig eth0 | grep "ether" | awk -F ' ' '{print $2}'`
36    export mygw=`route -n | grep 0.0.0.0 | grep eth0 | grep UG | awk -F ' ' '{print $2}'`
37    #Amazon Linux AMI 2017.03
38    #export myaddr=`ifconfig eth0 | grep "inet addr" | awk -F ' '  '{print $2}' |  awk -F ':' '{print $2}'`
39    #export mymask=`ifconfig eth0 | grep "Mask" | awk -F ' ' '{print $4}' |  awk -F ':' '{print $2}'`
40    #export mybc=`ifconfig eth0 | grep "Bcast" | awk -F ' ' '{print $3}' |  awk -F ':' '{print $2}'`
41    #export myhw=`ifconfig eth0 | grep "HWaddr" | awk -F ' ' '{print $5}'`
42    #export mygw=`route -n | grep 0.0.0.0 | grep eth0 | grep UG | awk -F ' ' '{print $2}'
43
44    sed "s/addr=192.168.1.2/addr=${myaddr}/" -i /data/f-stack/config.ini
45    sed "s/netmask=255.255.255.0/netmask=${mymask}/" -i /data/f-stack/config.ini
46    sed "s/broadcast=192.168.1.255/broadcast=${mybc}/" -i /data/f-stack/config.ini
47    sed "s/gateway=192.168.1.1/gateway=${mygw}/" -i /data/f-stack/config.ini
48
49    # enable kni
50    sed "s/#\[kni\]/\[kni\]/" -i /data/f-stack/config.ini
51    sed "s/#enable=1/enable=1/" -i /data/f-stack/config.ini
52    sed "s/#method=reject/method=reject/" -i /data/f-stack/config.ini
53    sed "s/#tcp_port=80/tcp_port=80/" -i /data/f-stack/config.ini
54    sed "s/#vlanstrip=1/vlanstrip=1/" -i /data/f-stack/config.ini
55
56
57    # Compile F-Stack lib
58    export FF_PATH=/data/f-stack
59    export FF_DPDK=/data/f-stack/dpdk/build
60    cd /data/f-stack/lib
61    make
62
63    # Compile Nginx
64    cd ../app/nginx-1.11.10
65    ./configure --prefix=/usr/local/nginx_fstack --with-ff_module
66    make
67    make install
68
69    # offload NIC（if there is only one NIC，the follow commands must run in a script）
70    ifconfig eth0 down
71    python /data/f-stack/dpdk/tools/dpdk-devbind.py --bind=igb_uio eth0
72
73    # copy config.ini to $NGX_PREFIX/conf/f-stack.conf
74    cp /data/f-stack/config.ini /usr/local/nginx_fstack/conf/f-stack.conf
75
76    # start Nginx
77    /usr/local/nginx_fstack/sbin/nginx
78
79    # start kni
80    sleep 30
81    ifconfig veth0 ${myaddr}  netmask ${mymask}  broadcast ${mybc} hw ether ${myhw}
82    route add -net 0.0.0.0 gw ${mygw} dev veth0
83