xref: /dpdk/examples/ipsec-secgw/test/run_test.sh (revision 7f12dfdc) 
1#! /bin/bash
2
3# usage: /bin/bash run_test.sh [-46]
4# Run all defined linux_test[4,6].sh test-cases one by one
5# user has to setup properly the following environment variables:
6#  SGW_PATH - path to the ipsec-secgw binary to test
7#  REMOTE_HOST - ip/hostname of the DUT
8#  REMOTE_IFACE - iface name for the test-port on DUT
9#  ETH_DEV - ethernet device to be used on SUT by DPDK ('-w <pci-id>')
10# Also user can optonally setup:
11#  SGW_LCORE - lcore to run ipsec-secgw on (default value is 0)
12#  CRYPTO_DEV - crypto device to be used ('-w <pci-id>')
13#  if none specified appropriate vdevs will be created by the scrit
14#  MULTI_SEG_TEST - ipsec-secgw option to enable reassembly support and
15#  specify size of reassembly table (i.e. MULTI_SEG_TEST="--reassemble 128")
16# refer to linux_test[4,6].sh for more information
17
18
19# All supported modes to test.
20# naming convention:
21# 'old' means that ipsec-secgw will run in legacy (non-librte_ipsec mode)
22# 'tun/trs' refer to tunnel/transport mode respectively
23
24usage()
25{
26	echo "Usage:"
27	echo -e "\t$0 -[46p]"
28	echo -e "\t\t-4 Perform Linux IPv4 network tests"
29	echo -e "\t\t-6 Perform Linux IPv6 network tests"
30	echo -e "\t\t-p Perform packet validation tests"
31	echo -e "\t\t-h Display this help"
32}
33
34LINUX_TEST="tun_aescbc_sha1 \
35tun_aescbc_sha1_esn \
36tun_aescbc_sha1_esn_atom \
37tun_aesgcm \
38tun_aesgcm_esn \
39tun_aesgcm_esn_atom \
40trs_aescbc_sha1 \
41trs_aescbc_sha1_esn \
42trs_aescbc_sha1_esn_atom \
43trs_aesgcm \
44trs_aesgcm_esn \
45trs_aesgcm_esn_atom \
46tun_aescbc_sha1_old \
47tun_aesgcm_old \
48trs_aescbc_sha1_old \
49trs_aesgcm_old \
50tun_aesctr_sha1 \
51tun_aesctr_sha1_old \
52tun_aesctr_sha1_esn \
53tun_aesctr_sha1_esn_atom \
54trs_aesctr_sha1 \
55trs_aesctr_sha1_old \
56trs_aesctr_sha1_esn \
57trs_aesctr_sha1_esn_atom \
58tun_3descbc_sha1 \
59tun_3descbc_sha1_old \
60tun_3descbc_sha1_esn \
61tun_3descbc_sha1_esn_atom \
62trs_3descbc_sha1 \
63trs_3descbc_sha1_old \
64trs_3descbc_sha1_esn \
65trs_3descbc_sha1_esn_atom"
66
67PKT_TESTS="trs_ipv6opts \
68tun_null_header_reconstruct"
69
70DIR=$(dirname $0)
71
72# get input options
73run4=0
74run6=0
75runpkt=0
76while getopts ":46ph" opt
77do
78	case $opt in
79		4)
80			run4=1
81			;;
82		6)
83			run6=1
84			;;
85		p)
86			runpkt=1
87			;;
88		h)
89			usage
90			exit 0
91			;;
92		?)
93			echo "Invalid option"
94			usage
95			exit 127
96			;;
97	esac
98done
99
100# no test suite has been selected
101if [[ ${run4} -eq 0 && ${run6} -eq 0 && ${runpkt} -eq 0 ]]; then
102	usage
103	exit 127
104fi
105
106# perform packet processing validation tests
107st=0
108if [ $runpkt -eq 1 ]; then
109	echo "Performing packet validation tests"
110	/bin/bash ${DIR}/pkttest.sh ${PKT_TESTS}
111	st=$?
112
113	echo "pkttests finished with status ${st}"
114	if [[ ${st} -ne 0 ]]; then
115		echo "ERROR pkttests FAILED"
116		exit ${st}
117	fi
118fi
119
120# perform network tests
121if [[ ${run4} -eq 1 || ${run6} -eq 1 ]]; then
122	for i in ${LINUX_TEST}; do
123
124		echo "starting test ${i}"
125
126		st4=0
127		if [[ ${run4} -ne 0 ]]; then
128			/bin/bash ${DIR}/linux_test4.sh ${i}
129			st4=$?
130			echo "test4 ${i} finished with status ${st4}"
131		fi
132
133		st6=0
134		if [[ ${run6} -ne 0 ]]; then
135			/bin/bash ${DIR}/linux_test6.sh ${i}
136			st6=$?
137			echo "test6 ${i} finished with status ${st6}"
138		fi
139
140		let "st = st4 + st6"
141		if [[ $st -ne 0 ]]; then
142			echo "ERROR test ${i} FAILED"
143			exit $st
144		fi
145	done
146fi
147