1 /******************************************************************************* 2 3 Copyright (c) 2001-2015, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ***************************************************************************/ 33 34 #include "ixgbe_api.h" 35 #include "ixgbe_common.h" 36 37 #define IXGBE_EMPTY_PARAM 38 39 static const u32 ixgbe_mvals_base[IXGBE_MVALS_IDX_LIMIT] = { 40 IXGBE_MVALS_INIT(IXGBE_EMPTY_PARAM) 41 }; 42 43 static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = { 44 IXGBE_MVALS_INIT(_X540) 45 }; 46 47 static const u32 ixgbe_mvals_X550[IXGBE_MVALS_IDX_LIMIT] = { 48 IXGBE_MVALS_INIT(_X550) 49 }; 50 51 static const u32 ixgbe_mvals_X550EM_x[IXGBE_MVALS_IDX_LIMIT] = { 52 IXGBE_MVALS_INIT(_X550EM_x) 53 }; 54 55 static const u32 ixgbe_mvals_X550EM_a[IXGBE_MVALS_IDX_LIMIT] = { 56 IXGBE_MVALS_INIT(_X550EM_a) 57 }; 58 59 /** 60 * ixgbe_dcb_get_rtrup2tc - read rtrup2tc reg 61 * @hw: pointer to hardware structure 62 * @map: pointer to u8 arr for returning map 63 * 64 * Read the rtrup2tc HW register and resolve its content into map 65 **/ 66 void ixgbe_dcb_get_rtrup2tc(struct ixgbe_hw *hw, u8 *map) 67 { 68 if (hw->mac.ops.get_rtrup2tc) 69 hw->mac.ops.get_rtrup2tc(hw, map); 70 } 71 72 /** 73 * ixgbe_init_shared_code - Initialize the shared code 74 * @hw: pointer to hardware structure 75 * 76 * This will assign function pointers and assign the MAC type and PHY code. 77 * Does not touch the hardware. This function must be called prior to any 78 * other function in the shared code. The ixgbe_hw structure should be 79 * memset to 0 prior to calling this function. The following fields in 80 * hw structure should be filled in prior to calling this function: 81 * hw_addr, back, device_id, vendor_id, subsystem_device_id, 82 * subsystem_vendor_id, and revision_id 83 **/ 84 s32 ixgbe_init_shared_code(struct ixgbe_hw *hw) 85 { 86 s32 status; 87 88 DEBUGFUNC("ixgbe_init_shared_code"); 89 90 /* 91 * Set the mac type 92 */ 93 ixgbe_set_mac_type(hw); 94 95 switch (hw->mac.type) { 96 case ixgbe_mac_82598EB: 97 status = ixgbe_init_ops_82598(hw); 98 break; 99 case ixgbe_mac_82599EB: 100 status = ixgbe_init_ops_82599(hw); 101 break; 102 case ixgbe_mac_X540: 103 status = ixgbe_init_ops_X540(hw); 104 break; 105 case ixgbe_mac_X550: 106 status = ixgbe_init_ops_X550(hw); 107 break; 108 case ixgbe_mac_X550EM_x: 109 case ixgbe_mac_X550EM_a: 110 status = ixgbe_init_ops_X550EM(hw); 111 break; 112 case ixgbe_mac_82599_vf: 113 case ixgbe_mac_X540_vf: 114 case ixgbe_mac_X550_vf: 115 case ixgbe_mac_X550EM_x_vf: 116 case ixgbe_mac_X550EM_a_vf: 117 status = ixgbe_init_ops_vf(hw); 118 break; 119 default: 120 status = IXGBE_ERR_DEVICE_NOT_SUPPORTED; 121 break; 122 } 123 hw->mac.max_link_up_time = IXGBE_LINK_UP_TIME; 124 125 return status; 126 } 127 128 /** 129 * ixgbe_set_mac_type - Sets MAC type 130 * @hw: pointer to the HW structure 131 * 132 * This function sets the mac type of the adapter based on the 133 * vendor ID and device ID stored in the hw structure. 134 **/ 135 s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) 136 { 137 s32 ret_val = IXGBE_SUCCESS; 138 139 DEBUGFUNC("ixgbe_set_mac_type\n"); 140 141 if (hw->vendor_id != IXGBE_INTEL_VENDOR_ID) { 142 ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED, 143 "Unsupported vendor id: %x", hw->vendor_id); 144 return IXGBE_ERR_DEVICE_NOT_SUPPORTED; 145 } 146 147 hw->mvals = ixgbe_mvals_base; 148 149 switch (hw->device_id) { 150 case IXGBE_DEV_ID_82598: 151 case IXGBE_DEV_ID_82598_BX: 152 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 153 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 154 case IXGBE_DEV_ID_82598AT: 155 case IXGBE_DEV_ID_82598AT2: 156 case IXGBE_DEV_ID_82598EB_CX4: 157 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: 158 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 159 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 160 case IXGBE_DEV_ID_82598EB_XF_LR: 161 case IXGBE_DEV_ID_82598EB_SFP_LOM: 162 hw->mac.type = ixgbe_mac_82598EB; 163 break; 164 case IXGBE_DEV_ID_82599_KX4: 165 case IXGBE_DEV_ID_82599_KX4_MEZZ: 166 case IXGBE_DEV_ID_82599_XAUI_LOM: 167 case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: 168 case IXGBE_DEV_ID_82599_KR: 169 case IXGBE_DEV_ID_82599_SFP: 170 case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: 171 case IXGBE_DEV_ID_82599_SFP_FCOE: 172 case IXGBE_DEV_ID_82599_SFP_EM: 173 case IXGBE_DEV_ID_82599_SFP_SF2: 174 case IXGBE_DEV_ID_82599_SFP_SF_QP: 175 case IXGBE_DEV_ID_82599_QSFP_SF_QP: 176 case IXGBE_DEV_ID_82599EN_SFP: 177 case IXGBE_DEV_ID_82599_CX4: 178 case IXGBE_DEV_ID_82599_LS: 179 case IXGBE_DEV_ID_82599_T3_LOM: 180 hw->mac.type = ixgbe_mac_82599EB; 181 break; 182 case IXGBE_DEV_ID_82599_VF: 183 case IXGBE_DEV_ID_82599_VF_HV: 184 hw->mac.type = ixgbe_mac_82599_vf; 185 break; 186 case IXGBE_DEV_ID_X540_VF: 187 case IXGBE_DEV_ID_X540_VF_HV: 188 hw->mac.type = ixgbe_mac_X540_vf; 189 hw->mvals = ixgbe_mvals_X540; 190 break; 191 case IXGBE_DEV_ID_X540T: 192 case IXGBE_DEV_ID_X540T1: 193 hw->mac.type = ixgbe_mac_X540; 194 hw->mvals = ixgbe_mvals_X540; 195 break; 196 case IXGBE_DEV_ID_X550T: 197 case IXGBE_DEV_ID_X550T1: 198 hw->mac.type = ixgbe_mac_X550; 199 hw->mvals = ixgbe_mvals_X550; 200 break; 201 case IXGBE_DEV_ID_X550EM_X_KX4: 202 case IXGBE_DEV_ID_X550EM_X_KR: 203 case IXGBE_DEV_ID_X550EM_X_10G_T: 204 case IXGBE_DEV_ID_X550EM_X_1G_T: 205 case IXGBE_DEV_ID_X550EM_X_SFP: 206 hw->mac.type = ixgbe_mac_X550EM_x; 207 hw->mvals = ixgbe_mvals_X550EM_x; 208 break; 209 case IXGBE_DEV_ID_X550EM_A_KR: 210 case IXGBE_DEV_ID_X550EM_A_KR_L: 211 case IXGBE_DEV_ID_X550EM_A_SFP_N: 212 case IXGBE_DEV_ID_X550EM_A_1G_T: 213 case IXGBE_DEV_ID_X550EM_A_1G_T_L: 214 case IXGBE_DEV_ID_X550EM_A_10G_T: 215 case IXGBE_DEV_ID_X550EM_A_QSFP: 216 case IXGBE_DEV_ID_X550EM_A_QSFP_N: 217 case IXGBE_DEV_ID_X550EM_A_SFP: 218 hw->mac.type = ixgbe_mac_X550EM_a; 219 hw->mvals = ixgbe_mvals_X550EM_a; 220 break; 221 case IXGBE_DEV_ID_X550_VF: 222 case IXGBE_DEV_ID_X550_VF_HV: 223 hw->mac.type = ixgbe_mac_X550_vf; 224 hw->mvals = ixgbe_mvals_X550; 225 break; 226 case IXGBE_DEV_ID_X550EM_X_VF: 227 case IXGBE_DEV_ID_X550EM_X_VF_HV: 228 hw->mac.type = ixgbe_mac_X550EM_x_vf; 229 hw->mvals = ixgbe_mvals_X550EM_x; 230 break; 231 case IXGBE_DEV_ID_X550EM_A_VF: 232 case IXGBE_DEV_ID_X550EM_A_VF_HV: 233 hw->mac.type = ixgbe_mac_X550EM_a_vf; 234 hw->mvals = ixgbe_mvals_X550EM_a; 235 break; 236 default: 237 ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; 238 ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED, 239 "Unsupported device id: %x", 240 hw->device_id); 241 break; 242 } 243 244 DEBUGOUT2("ixgbe_set_mac_type found mac: %d, returns: %d\n", 245 hw->mac.type, ret_val); 246 return ret_val; 247 } 248 249 /** 250 * ixgbe_init_hw - Initialize the hardware 251 * @hw: pointer to hardware structure 252 * 253 * Initialize the hardware by resetting and then starting the hardware 254 **/ 255 s32 ixgbe_init_hw(struct ixgbe_hw *hw) 256 { 257 return ixgbe_call_func(hw, hw->mac.ops.init_hw, (hw), 258 IXGBE_NOT_IMPLEMENTED); 259 } 260 261 /** 262 * ixgbe_reset_hw - Performs a hardware reset 263 * @hw: pointer to hardware structure 264 * 265 * Resets the hardware by resetting the transmit and receive units, masks and 266 * clears all interrupts, performs a PHY reset, and performs a MAC reset 267 **/ 268 s32 ixgbe_reset_hw(struct ixgbe_hw *hw) 269 { 270 return ixgbe_call_func(hw, hw->mac.ops.reset_hw, (hw), 271 IXGBE_NOT_IMPLEMENTED); 272 } 273 274 /** 275 * ixgbe_start_hw - Prepares hardware for Rx/Tx 276 * @hw: pointer to hardware structure 277 * 278 * Starts the hardware by filling the bus info structure and media type, 279 * clears all on chip counters, initializes receive address registers, 280 * multicast table, VLAN filter table, calls routine to setup link and 281 * flow control settings, and leaves transmit and receive units disabled 282 * and uninitialized. 283 **/ 284 s32 ixgbe_start_hw(struct ixgbe_hw *hw) 285 { 286 return ixgbe_call_func(hw, hw->mac.ops.start_hw, (hw), 287 IXGBE_NOT_IMPLEMENTED); 288 } 289 290 /** 291 * ixgbe_enable_relaxed_ordering - Enables tx relaxed ordering, 292 * which is disabled by default in ixgbe_start_hw(); 293 * 294 * @hw: pointer to hardware structure 295 * 296 * Enable relaxed ordering; 297 **/ 298 void ixgbe_enable_relaxed_ordering(struct ixgbe_hw *hw) 299 { 300 if (hw->mac.ops.enable_relaxed_ordering) 301 hw->mac.ops.enable_relaxed_ordering(hw); 302 } 303 304 /** 305 * ixgbe_clear_hw_cntrs - Clear hardware counters 306 * @hw: pointer to hardware structure 307 * 308 * Clears all hardware statistics counters by reading them from the hardware 309 * Statistics counters are clear on read. 310 **/ 311 s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw) 312 { 313 return ixgbe_call_func(hw, hw->mac.ops.clear_hw_cntrs, (hw), 314 IXGBE_NOT_IMPLEMENTED); 315 } 316 317 /** 318 * ixgbe_get_media_type - Get media type 319 * @hw: pointer to hardware structure 320 * 321 * Returns the media type (fiber, copper, backplane) 322 **/ 323 enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw) 324 { 325 return ixgbe_call_func(hw, hw->mac.ops.get_media_type, (hw), 326 ixgbe_media_type_unknown); 327 } 328 329 /** 330 * ixgbe_get_mac_addr - Get MAC address 331 * @hw: pointer to hardware structure 332 * @mac_addr: Adapter MAC address 333 * 334 * Reads the adapter's MAC address from the first Receive Address Register 335 * (RAR0) A reset of the adapter must have been performed prior to calling 336 * this function in order for the MAC address to have been loaded from the 337 * EEPROM into RAR0 338 **/ 339 s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr) 340 { 341 return ixgbe_call_func(hw, hw->mac.ops.get_mac_addr, 342 (hw, mac_addr), IXGBE_NOT_IMPLEMENTED); 343 } 344 345 /** 346 * ixgbe_get_san_mac_addr - Get SAN MAC address 347 * @hw: pointer to hardware structure 348 * @san_mac_addr: SAN MAC address 349 * 350 * Reads the SAN MAC address from the EEPROM, if it's available. This is 351 * per-port, so set_lan_id() must be called before reading the addresses. 352 **/ 353 s32 ixgbe_get_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) 354 { 355 return ixgbe_call_func(hw, hw->mac.ops.get_san_mac_addr, 356 (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); 357 } 358 359 /** 360 * ixgbe_set_san_mac_addr - Write a SAN MAC address 361 * @hw: pointer to hardware structure 362 * @san_mac_addr: SAN MAC address 363 * 364 * Writes A SAN MAC address to the EEPROM. 365 **/ 366 s32 ixgbe_set_san_mac_addr(struct ixgbe_hw *hw, u8 *san_mac_addr) 367 { 368 return ixgbe_call_func(hw, hw->mac.ops.set_san_mac_addr, 369 (hw, san_mac_addr), IXGBE_NOT_IMPLEMENTED); 370 } 371 372 /** 373 * ixgbe_get_device_caps - Get additional device capabilities 374 * @hw: pointer to hardware structure 375 * @device_caps: the EEPROM word for device capabilities 376 * 377 * Reads the extra device capabilities from the EEPROM 378 **/ 379 s32 ixgbe_get_device_caps(struct ixgbe_hw *hw, u16 *device_caps) 380 { 381 return ixgbe_call_func(hw, hw->mac.ops.get_device_caps, 382 (hw, device_caps), IXGBE_NOT_IMPLEMENTED); 383 } 384 385 /** 386 * ixgbe_get_wwn_prefix - Get alternative WWNN/WWPN prefix from the EEPROM 387 * @hw: pointer to hardware structure 388 * @wwnn_prefix: the alternative WWNN prefix 389 * @wwpn_prefix: the alternative WWPN prefix 390 * 391 * This function will read the EEPROM from the alternative SAN MAC address 392 * block to check the support for the alternative WWNN/WWPN prefix support. 393 **/ 394 s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix, 395 u16 *wwpn_prefix) 396 { 397 return ixgbe_call_func(hw, hw->mac.ops.get_wwn_prefix, 398 (hw, wwnn_prefix, wwpn_prefix), 399 IXGBE_NOT_IMPLEMENTED); 400 } 401 402 /** 403 * ixgbe_get_fcoe_boot_status - Get FCOE boot status from EEPROM 404 * @hw: pointer to hardware structure 405 * @bs: the fcoe boot status 406 * 407 * This function will read the FCOE boot status from the iSCSI FCOE block 408 **/ 409 s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs) 410 { 411 return ixgbe_call_func(hw, hw->mac.ops.get_fcoe_boot_status, 412 (hw, bs), 413 IXGBE_NOT_IMPLEMENTED); 414 } 415 416 /** 417 * ixgbe_get_bus_info - Set PCI bus info 418 * @hw: pointer to hardware structure 419 * 420 * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure 421 **/ 422 s32 ixgbe_get_bus_info(struct ixgbe_hw *hw) 423 { 424 return ixgbe_call_func(hw, hw->mac.ops.get_bus_info, (hw), 425 IXGBE_NOT_IMPLEMENTED); 426 } 427 428 /** 429 * ixgbe_get_num_of_tx_queues - Get Tx queues 430 * @hw: pointer to hardware structure 431 * 432 * Returns the number of transmit queues for the given adapter. 433 **/ 434 u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw) 435 { 436 return hw->mac.max_tx_queues; 437 } 438 439 /** 440 * ixgbe_get_num_of_rx_queues - Get Rx queues 441 * @hw: pointer to hardware structure 442 * 443 * Returns the number of receive queues for the given adapter. 444 **/ 445 u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw) 446 { 447 return hw->mac.max_rx_queues; 448 } 449 450 /** 451 * ixgbe_stop_adapter - Disable Rx/Tx units 452 * @hw: pointer to hardware structure 453 * 454 * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, 455 * disables transmit and receive units. The adapter_stopped flag is used by 456 * the shared code and drivers to determine if the adapter is in a stopped 457 * state and should not touch the hardware. 458 **/ 459 s32 ixgbe_stop_adapter(struct ixgbe_hw *hw) 460 { 461 return ixgbe_call_func(hw, hw->mac.ops.stop_adapter, (hw), 462 IXGBE_NOT_IMPLEMENTED); 463 } 464 465 /** 466 * ixgbe_read_pba_string - Reads part number string from EEPROM 467 * @hw: pointer to hardware structure 468 * @pba_num: stores the part number string from the EEPROM 469 * @pba_num_size: part number string buffer length 470 * 471 * Reads the part number string from the EEPROM. 472 **/ 473 s32 ixgbe_read_pba_string(struct ixgbe_hw *hw, u8 *pba_num, u32 pba_num_size) 474 { 475 return ixgbe_read_pba_string_generic(hw, pba_num, pba_num_size); 476 } 477 478 /** 479 * ixgbe_read_pba_num - Reads part number from EEPROM 480 * @hw: pointer to hardware structure 481 * @pba_num: stores the part number from the EEPROM 482 * 483 * Reads the part number from the EEPROM. 484 **/ 485 s32 ixgbe_read_pba_num(struct ixgbe_hw *hw, u32 *pba_num) 486 { 487 return ixgbe_read_pba_num_generic(hw, pba_num); 488 } 489 490 /** 491 * ixgbe_identify_phy - Get PHY type 492 * @hw: pointer to hardware structure 493 * 494 * Determines the physical layer module found on the current adapter. 495 **/ 496 s32 ixgbe_identify_phy(struct ixgbe_hw *hw) 497 { 498 s32 status = IXGBE_SUCCESS; 499 500 if (hw->phy.type == ixgbe_phy_unknown) { 501 status = ixgbe_call_func(hw, hw->phy.ops.identify, (hw), 502 IXGBE_NOT_IMPLEMENTED); 503 } 504 505 return status; 506 } 507 508 /** 509 * ixgbe_reset_phy - Perform a PHY reset 510 * @hw: pointer to hardware structure 511 **/ 512 s32 ixgbe_reset_phy(struct ixgbe_hw *hw) 513 { 514 s32 status = IXGBE_SUCCESS; 515 516 if (hw->phy.type == ixgbe_phy_unknown) { 517 if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS) 518 status = IXGBE_ERR_PHY; 519 } 520 521 if (status == IXGBE_SUCCESS) { 522 status = ixgbe_call_func(hw, hw->phy.ops.reset, (hw), 523 IXGBE_NOT_IMPLEMENTED); 524 } 525 return status; 526 } 527 528 /** 529 * ixgbe_get_phy_firmware_version - 530 * @hw: pointer to hardware structure 531 * @firmware_version: pointer to firmware version 532 **/ 533 s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw, u16 *firmware_version) 534 { 535 s32 status = IXGBE_SUCCESS; 536 537 status = ixgbe_call_func(hw, hw->phy.ops.get_firmware_version, 538 (hw, firmware_version), 539 IXGBE_NOT_IMPLEMENTED); 540 return status; 541 } 542 543 /** 544 * ixgbe_read_phy_reg - Read PHY register 545 * @hw: pointer to hardware structure 546 * @reg_addr: 32 bit address of PHY register to read 547 * @phy_data: Pointer to read data from PHY register 548 * 549 * Reads a value from a specified PHY register 550 **/ 551 s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, 552 u16 *phy_data) 553 { 554 if (hw->phy.id == 0) 555 ixgbe_identify_phy(hw); 556 557 return ixgbe_call_func(hw, hw->phy.ops.read_reg, (hw, reg_addr, 558 device_type, phy_data), IXGBE_NOT_IMPLEMENTED); 559 } 560 561 /** 562 * ixgbe_write_phy_reg - Write PHY register 563 * @hw: pointer to hardware structure 564 * @reg_addr: 32 bit PHY register to write 565 * @phy_data: Data to write to the PHY register 566 * 567 * Writes a value to specified PHY register 568 **/ 569 s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type, 570 u16 phy_data) 571 { 572 if (hw->phy.id == 0) 573 ixgbe_identify_phy(hw); 574 575 return ixgbe_call_func(hw, hw->phy.ops.write_reg, (hw, reg_addr, 576 device_type, phy_data), IXGBE_NOT_IMPLEMENTED); 577 } 578 579 /** 580 * ixgbe_setup_phy_link - Restart PHY autoneg 581 * @hw: pointer to hardware structure 582 * 583 * Restart autonegotiation and PHY and waits for completion. 584 **/ 585 s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw) 586 { 587 return ixgbe_call_func(hw, hw->phy.ops.setup_link, (hw), 588 IXGBE_NOT_IMPLEMENTED); 589 } 590 591 /** 592 * ixgbe_setup_internal_phy - Configure integrated PHY 593 * @hw: pointer to hardware structure 594 * 595 * Reconfigure the integrated PHY in order to enable talk to the external PHY. 596 * Returns success if not implemented, since nothing needs to be done in this 597 * case. 598 */ 599 s32 ixgbe_setup_internal_phy(struct ixgbe_hw *hw) 600 { 601 return ixgbe_call_func(hw, hw->phy.ops.setup_internal_link, (hw), 602 IXGBE_SUCCESS); 603 } 604 605 /** 606 * ixgbe_check_phy_link - Determine link and speed status 607 * @hw: pointer to hardware structure 608 * 609 * Reads a PHY register to determine if link is up and the current speed for 610 * the PHY. 611 **/ 612 s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, 613 bool *link_up) 614 { 615 return ixgbe_call_func(hw, hw->phy.ops.check_link, (hw, speed, 616 link_up), IXGBE_NOT_IMPLEMENTED); 617 } 618 619 /** 620 * ixgbe_setup_phy_link_speed - Set auto advertise 621 * @hw: pointer to hardware structure 622 * @speed: new link speed 623 * 624 * Sets the auto advertised capabilities 625 **/ 626 s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed, 627 bool autoneg_wait_to_complete) 628 { 629 return ixgbe_call_func(hw, hw->phy.ops.setup_link_speed, (hw, speed, 630 autoneg_wait_to_complete), 631 IXGBE_NOT_IMPLEMENTED); 632 } 633 634 /** 635 * ixgbe_set_phy_power - Control the phy power state 636 * @hw: pointer to hardware structure 637 * @on: true for on, false for off 638 */ 639 s32 ixgbe_set_phy_power(struct ixgbe_hw *hw, bool on) 640 { 641 return ixgbe_call_func(hw, hw->phy.ops.set_phy_power, (hw, on), 642 IXGBE_NOT_IMPLEMENTED); 643 } 644 645 /** 646 * ixgbe_check_link - Get link and speed status 647 * @hw: pointer to hardware structure 648 * 649 * Reads the links register to determine if link is up and the current speed 650 **/ 651 s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed, 652 bool *link_up, bool link_up_wait_to_complete) 653 { 654 return ixgbe_call_func(hw, hw->mac.ops.check_link, (hw, speed, 655 link_up, link_up_wait_to_complete), 656 IXGBE_NOT_IMPLEMENTED); 657 } 658 659 /** 660 * ixgbe_disable_tx_laser - Disable Tx laser 661 * @hw: pointer to hardware structure 662 * 663 * If the driver needs to disable the laser on SFI optics. 664 **/ 665 void ixgbe_disable_tx_laser(struct ixgbe_hw *hw) 666 { 667 if (hw->mac.ops.disable_tx_laser) 668 hw->mac.ops.disable_tx_laser(hw); 669 } 670 671 /** 672 * ixgbe_enable_tx_laser - Enable Tx laser 673 * @hw: pointer to hardware structure 674 * 675 * If the driver needs to enable the laser on SFI optics. 676 **/ 677 void ixgbe_enable_tx_laser(struct ixgbe_hw *hw) 678 { 679 if (hw->mac.ops.enable_tx_laser) 680 hw->mac.ops.enable_tx_laser(hw); 681 } 682 683 /** 684 * ixgbe_flap_tx_laser - flap Tx laser to start autotry process 685 * @hw: pointer to hardware structure 686 * 687 * When the driver changes the link speeds that it can support then 688 * flap the tx laser to alert the link partner to start autotry 689 * process on its end. 690 **/ 691 void ixgbe_flap_tx_laser(struct ixgbe_hw *hw) 692 { 693 if (hw->mac.ops.flap_tx_laser) 694 hw->mac.ops.flap_tx_laser(hw); 695 } 696 697 /** 698 * ixgbe_setup_link - Set link speed 699 * @hw: pointer to hardware structure 700 * @speed: new link speed 701 * 702 * Configures link settings. Restarts the link. 703 * Performs autonegotiation if needed. 704 **/ 705 s32 ixgbe_setup_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, 706 bool autoneg_wait_to_complete) 707 { 708 return ixgbe_call_func(hw, hw->mac.ops.setup_link, (hw, speed, 709 autoneg_wait_to_complete), 710 IXGBE_NOT_IMPLEMENTED); 711 } 712 713 /** 714 * ixgbe_setup_mac_link - Set link speed 715 * @hw: pointer to hardware structure 716 * @speed: new link speed 717 * 718 * Configures link settings. Restarts the link. 719 * Performs autonegotiation if needed. 720 **/ 721 s32 ixgbe_setup_mac_link(struct ixgbe_hw *hw, ixgbe_link_speed speed, 722 bool autoneg_wait_to_complete) 723 { 724 return ixgbe_call_func(hw, hw->mac.ops.setup_mac_link, (hw, speed, 725 autoneg_wait_to_complete), 726 IXGBE_NOT_IMPLEMENTED); 727 } 728 729 /** 730 * ixgbe_get_link_capabilities - Returns link capabilities 731 * @hw: pointer to hardware structure 732 * 733 * Determines the link capabilities of the current configuration. 734 **/ 735 s32 ixgbe_get_link_capabilities(struct ixgbe_hw *hw, ixgbe_link_speed *speed, 736 bool *autoneg) 737 { 738 return ixgbe_call_func(hw, hw->mac.ops.get_link_capabilities, (hw, 739 speed, autoneg), IXGBE_NOT_IMPLEMENTED); 740 } 741 742 /** 743 * ixgbe_led_on - Turn on LEDs 744 * @hw: pointer to hardware structure 745 * @index: led number to turn on 746 * 747 * Turns on the software controllable LEDs. 748 **/ 749 s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index) 750 { 751 return ixgbe_call_func(hw, hw->mac.ops.led_on, (hw, index), 752 IXGBE_NOT_IMPLEMENTED); 753 } 754 755 /** 756 * ixgbe_led_off - Turn off LEDs 757 * @hw: pointer to hardware structure 758 * @index: led number to turn off 759 * 760 * Turns off the software controllable LEDs. 761 **/ 762 s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index) 763 { 764 return ixgbe_call_func(hw, hw->mac.ops.led_off, (hw, index), 765 IXGBE_NOT_IMPLEMENTED); 766 } 767 768 /** 769 * ixgbe_blink_led_start - Blink LEDs 770 * @hw: pointer to hardware structure 771 * @index: led number to blink 772 * 773 * Blink LED based on index. 774 **/ 775 s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index) 776 { 777 return ixgbe_call_func(hw, hw->mac.ops.blink_led_start, (hw, index), 778 IXGBE_NOT_IMPLEMENTED); 779 } 780 781 /** 782 * ixgbe_blink_led_stop - Stop blinking LEDs 783 * @hw: pointer to hardware structure 784 * 785 * Stop blinking LED based on index. 786 **/ 787 s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index) 788 { 789 return ixgbe_call_func(hw, hw->mac.ops.blink_led_stop, (hw, index), 790 IXGBE_NOT_IMPLEMENTED); 791 } 792 793 /** 794 * ixgbe_init_eeprom_params - Initialize EEPROM parameters 795 * @hw: pointer to hardware structure 796 * 797 * Initializes the EEPROM parameters ixgbe_eeprom_info within the 798 * ixgbe_hw struct in order to set up EEPROM access. 799 **/ 800 s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw) 801 { 802 return ixgbe_call_func(hw, hw->eeprom.ops.init_params, (hw), 803 IXGBE_NOT_IMPLEMENTED); 804 } 805 806 807 /** 808 * ixgbe_write_eeprom - Write word to EEPROM 809 * @hw: pointer to hardware structure 810 * @offset: offset within the EEPROM to be written to 811 * @data: 16 bit word to be written to the EEPROM 812 * 813 * Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not 814 * called after this function, the EEPROM will most likely contain an 815 * invalid checksum. 816 **/ 817 s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data) 818 { 819 return ixgbe_call_func(hw, hw->eeprom.ops.write, (hw, offset, data), 820 IXGBE_NOT_IMPLEMENTED); 821 } 822 823 /** 824 * ixgbe_write_eeprom_buffer - Write word(s) to EEPROM 825 * @hw: pointer to hardware structure 826 * @offset: offset within the EEPROM to be written to 827 * @data: 16 bit word(s) to be written to the EEPROM 828 * @words: number of words 829 * 830 * Writes 16 bit word(s) to EEPROM. If ixgbe_eeprom_update_checksum is not 831 * called after this function, the EEPROM will most likely contain an 832 * invalid checksum. 833 **/ 834 s32 ixgbe_write_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, u16 words, 835 u16 *data) 836 { 837 return ixgbe_call_func(hw, hw->eeprom.ops.write_buffer, 838 (hw, offset, words, data), 839 IXGBE_NOT_IMPLEMENTED); 840 } 841 842 /** 843 * ixgbe_read_eeprom - Read word from EEPROM 844 * @hw: pointer to hardware structure 845 * @offset: offset within the EEPROM to be read 846 * @data: read 16 bit value from EEPROM 847 * 848 * Reads 16 bit value from EEPROM 849 **/ 850 s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data) 851 { 852 return ixgbe_call_func(hw, hw->eeprom.ops.read, (hw, offset, data), 853 IXGBE_NOT_IMPLEMENTED); 854 } 855 856 /** 857 * ixgbe_read_eeprom_buffer - Read word(s) from EEPROM 858 * @hw: pointer to hardware structure 859 * @offset: offset within the EEPROM to be read 860 * @data: read 16 bit word(s) from EEPROM 861 * @words: number of words 862 * 863 * Reads 16 bit word(s) from EEPROM 864 **/ 865 s32 ixgbe_read_eeprom_buffer(struct ixgbe_hw *hw, u16 offset, 866 u16 words, u16 *data) 867 { 868 return ixgbe_call_func(hw, hw->eeprom.ops.read_buffer, 869 (hw, offset, words, data), 870 IXGBE_NOT_IMPLEMENTED); 871 } 872 873 /** 874 * ixgbe_validate_eeprom_checksum - Validate EEPROM checksum 875 * @hw: pointer to hardware structure 876 * @checksum_val: calculated checksum 877 * 878 * Performs checksum calculation and validates the EEPROM checksum 879 **/ 880 s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val) 881 { 882 return ixgbe_call_func(hw, hw->eeprom.ops.validate_checksum, 883 (hw, checksum_val), IXGBE_NOT_IMPLEMENTED); 884 } 885 886 /** 887 * ixgbe_eeprom_update_checksum - Updates the EEPROM checksum 888 * @hw: pointer to hardware structure 889 **/ 890 s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw) 891 { 892 return ixgbe_call_func(hw, hw->eeprom.ops.update_checksum, (hw), 893 IXGBE_NOT_IMPLEMENTED); 894 } 895 896 /** 897 * ixgbe_insert_mac_addr - Find a RAR for this mac address 898 * @hw: pointer to hardware structure 899 * @addr: Address to put into receive address register 900 * @vmdq: VMDq pool to assign 901 * 902 * Puts an ethernet address into a receive address register, or 903 * finds the rar that it is aleady in; adds to the pool list 904 **/ 905 s32 ixgbe_insert_mac_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) 906 { 907 return ixgbe_call_func(hw, hw->mac.ops.insert_mac_addr, 908 (hw, addr, vmdq), 909 IXGBE_NOT_IMPLEMENTED); 910 } 911 912 /** 913 * ixgbe_set_rar - Set Rx address register 914 * @hw: pointer to hardware structure 915 * @index: Receive address register to write 916 * @addr: Address to put into receive address register 917 * @vmdq: VMDq "set" 918 * @enable_addr: set flag that address is active 919 * 920 * Puts an ethernet address into a receive address register. 921 **/ 922 s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, 923 u32 enable_addr) 924 { 925 return ixgbe_call_func(hw, hw->mac.ops.set_rar, (hw, index, addr, vmdq, 926 enable_addr), IXGBE_NOT_IMPLEMENTED); 927 } 928 929 /** 930 * ixgbe_clear_rar - Clear Rx address register 931 * @hw: pointer to hardware structure 932 * @index: Receive address register to write 933 * 934 * Puts an ethernet address into a receive address register. 935 **/ 936 s32 ixgbe_clear_rar(struct ixgbe_hw *hw, u32 index) 937 { 938 return ixgbe_call_func(hw, hw->mac.ops.clear_rar, (hw, index), 939 IXGBE_NOT_IMPLEMENTED); 940 } 941 942 /** 943 * ixgbe_set_vmdq - Associate a VMDq index with a receive address 944 * @hw: pointer to hardware structure 945 * @rar: receive address register index to associate with VMDq index 946 * @vmdq: VMDq set or pool index 947 **/ 948 s32 ixgbe_set_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 949 { 950 return ixgbe_call_func(hw, hw->mac.ops.set_vmdq, (hw, rar, vmdq), 951 IXGBE_NOT_IMPLEMENTED); 952 953 } 954 955 /** 956 * ixgbe_set_vmdq_san_mac - Associate VMDq index 127 with a receive address 957 * @hw: pointer to hardware structure 958 * @vmdq: VMDq default pool index 959 **/ 960 s32 ixgbe_set_vmdq_san_mac(struct ixgbe_hw *hw, u32 vmdq) 961 { 962 return ixgbe_call_func(hw, hw->mac.ops.set_vmdq_san_mac, 963 (hw, vmdq), IXGBE_NOT_IMPLEMENTED); 964 } 965 966 /** 967 * ixgbe_clear_vmdq - Disassociate a VMDq index from a receive address 968 * @hw: pointer to hardware structure 969 * @rar: receive address register index to disassociate with VMDq index 970 * @vmdq: VMDq set or pool index 971 **/ 972 s32 ixgbe_clear_vmdq(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 973 { 974 return ixgbe_call_func(hw, hw->mac.ops.clear_vmdq, (hw, rar, vmdq), 975 IXGBE_NOT_IMPLEMENTED); 976 } 977 978 /** 979 * ixgbe_init_rx_addrs - Initializes receive address filters. 980 * @hw: pointer to hardware structure 981 * 982 * Places the MAC address in receive address register 0 and clears the rest 983 * of the receive address registers. Clears the multicast table. Assumes 984 * the receiver is in reset when the routine is called. 985 **/ 986 s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw) 987 { 988 return ixgbe_call_func(hw, hw->mac.ops.init_rx_addrs, (hw), 989 IXGBE_NOT_IMPLEMENTED); 990 } 991 992 /** 993 * ixgbe_get_num_rx_addrs - Returns the number of RAR entries. 994 * @hw: pointer to hardware structure 995 **/ 996 u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw) 997 { 998 return hw->mac.num_rar_entries; 999 } 1000 1001 /** 1002 * ixgbe_update_uc_addr_list - Updates the MAC's list of secondary addresses 1003 * @hw: pointer to hardware structure 1004 * @addr_list: the list of new multicast addresses 1005 * @addr_count: number of addresses 1006 * @func: iterator function to walk the multicast address list 1007 * 1008 * The given list replaces any existing list. Clears the secondary addrs from 1009 * receive address registers. Uses unused receive address registers for the 1010 * first secondary addresses, and falls back to promiscuous mode as needed. 1011 **/ 1012 s32 ixgbe_update_uc_addr_list(struct ixgbe_hw *hw, u8 *addr_list, 1013 u32 addr_count, ixgbe_mc_addr_itr func) 1014 { 1015 return ixgbe_call_func(hw, hw->mac.ops.update_uc_addr_list, (hw, 1016 addr_list, addr_count, func), 1017 IXGBE_NOT_IMPLEMENTED); 1018 } 1019 1020 /** 1021 * ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses 1022 * @hw: pointer to hardware structure 1023 * @mc_addr_list: the list of new multicast addresses 1024 * @mc_addr_count: number of addresses 1025 * @func: iterator function to walk the multicast address list 1026 * 1027 * The given list replaces any existing list. Clears the MC addrs from receive 1028 * address registers and the multicast table. Uses unused receive address 1029 * registers for the first multicast addresses, and hashes the rest into the 1030 * multicast table. 1031 **/ 1032 s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list, 1033 u32 mc_addr_count, ixgbe_mc_addr_itr func, 1034 bool clear) 1035 { 1036 return ixgbe_call_func(hw, hw->mac.ops.update_mc_addr_list, (hw, 1037 mc_addr_list, mc_addr_count, func, clear), 1038 IXGBE_NOT_IMPLEMENTED); 1039 } 1040 1041 /** 1042 * ixgbe_enable_mc - Enable multicast address in RAR 1043 * @hw: pointer to hardware structure 1044 * 1045 * Enables multicast address in RAR and the use of the multicast hash table. 1046 **/ 1047 s32 ixgbe_enable_mc(struct ixgbe_hw *hw) 1048 { 1049 return ixgbe_call_func(hw, hw->mac.ops.enable_mc, (hw), 1050 IXGBE_NOT_IMPLEMENTED); 1051 } 1052 1053 /** 1054 * ixgbe_disable_mc - Disable multicast address in RAR 1055 * @hw: pointer to hardware structure 1056 * 1057 * Disables multicast address in RAR and the use of the multicast hash table. 1058 **/ 1059 s32 ixgbe_disable_mc(struct ixgbe_hw *hw) 1060 { 1061 return ixgbe_call_func(hw, hw->mac.ops.disable_mc, (hw), 1062 IXGBE_NOT_IMPLEMENTED); 1063 } 1064 1065 /** 1066 * ixgbe_clear_vfta - Clear VLAN filter table 1067 * @hw: pointer to hardware structure 1068 * 1069 * Clears the VLAN filer table, and the VMDq index associated with the filter 1070 **/ 1071 s32 ixgbe_clear_vfta(struct ixgbe_hw *hw) 1072 { 1073 return ixgbe_call_func(hw, hw->mac.ops.clear_vfta, (hw), 1074 IXGBE_NOT_IMPLEMENTED); 1075 } 1076 1077 /** 1078 * ixgbe_set_vfta - Set VLAN filter table 1079 * @hw: pointer to hardware structure 1080 * @vlan: VLAN id to write to VLAN filter 1081 * @vind: VMDq output index that maps queue to VLAN id in VFTA 1082 * @vlan_on: boolean flag to turn on/off VLAN in VFTA 1083 * 1084 * Turn on/off specified VLAN in the VLAN filter table. 1085 **/ 1086 s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on) 1087 { 1088 return ixgbe_call_func(hw, hw->mac.ops.set_vfta, (hw, vlan, vind, 1089 vlan_on), IXGBE_NOT_IMPLEMENTED); 1090 } 1091 1092 /** 1093 * ixgbe_set_vlvf - Set VLAN Pool Filter 1094 * @hw: pointer to hardware structure 1095 * @vlan: VLAN id to write to VLAN filter 1096 * @vind: VMDq output index that maps queue to VLAN id in VFVFB 1097 * @vlan_on: boolean flag to turn on/off VLAN in VFVF 1098 * @vfta_changed: pointer to boolean flag which indicates whether VFTA 1099 * should be changed 1100 * 1101 * Turn on/off specified bit in VLVF table. 1102 **/ 1103 s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on, 1104 bool *vfta_changed) 1105 { 1106 return ixgbe_call_func(hw, hw->mac.ops.set_vlvf, (hw, vlan, vind, 1107 vlan_on, vfta_changed), IXGBE_NOT_IMPLEMENTED); 1108 } 1109 1110 /** 1111 * ixgbe_fc_enable - Enable flow control 1112 * @hw: pointer to hardware structure 1113 * 1114 * Configures the flow control settings based on SW configuration. 1115 **/ 1116 s32 ixgbe_fc_enable(struct ixgbe_hw *hw) 1117 { 1118 return ixgbe_call_func(hw, hw->mac.ops.fc_enable, (hw), 1119 IXGBE_NOT_IMPLEMENTED); 1120 } 1121 1122 /** 1123 * ixgbe_setup_fc - Set up flow control 1124 * @hw: pointer to hardware structure 1125 * 1126 * Called at init time to set up flow control. 1127 **/ 1128 s32 ixgbe_setup_fc(struct ixgbe_hw *hw) 1129 { 1130 return ixgbe_call_func(hw, hw->mac.ops.setup_fc, (hw), 1131 IXGBE_NOT_IMPLEMENTED); 1132 } 1133 1134 /** 1135 * ixgbe_set_fw_drv_ver - Try to send the driver version number FW 1136 * @hw: pointer to hardware structure 1137 * @maj: driver major number to be sent to firmware 1138 * @min: driver minor number to be sent to firmware 1139 * @build: driver build number to be sent to firmware 1140 * @ver: driver version number to be sent to firmware 1141 **/ 1142 s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build, 1143 u8 ver) 1144 { 1145 return ixgbe_call_func(hw, hw->mac.ops.set_fw_drv_ver, (hw, maj, min, 1146 build, ver), IXGBE_NOT_IMPLEMENTED); 1147 } 1148 1149 1150 /** 1151 * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data 1152 * @hw: pointer to hardware structure 1153 * 1154 * Updates the temperatures in mac.thermal_sensor_data 1155 **/ 1156 s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw) 1157 { 1158 return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw), 1159 IXGBE_NOT_IMPLEMENTED); 1160 } 1161 1162 /** 1163 * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds 1164 * @hw: pointer to hardware structure 1165 * 1166 * Inits the thermal sensor thresholds according to the NVM map 1167 **/ 1168 s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw) 1169 { 1170 return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw), 1171 IXGBE_NOT_IMPLEMENTED); 1172 } 1173 1174 /** 1175 * ixgbe_dmac_config - Configure DMA Coalescing registers. 1176 * @hw: pointer to hardware structure 1177 * 1178 * Configure DMA coalescing. If enabling dmac, dmac is activated. 1179 * When disabling dmac, dmac enable dmac bit is cleared. 1180 **/ 1181 s32 ixgbe_dmac_config(struct ixgbe_hw *hw) 1182 { 1183 return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw), 1184 IXGBE_NOT_IMPLEMENTED); 1185 } 1186 1187 /** 1188 * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers. 1189 * @hw: pointer to hardware structure 1190 * 1191 * Disables dmac, updates per TC settings, and then enable dmac. 1192 **/ 1193 s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw) 1194 { 1195 return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw), 1196 IXGBE_NOT_IMPLEMENTED); 1197 } 1198 1199 /** 1200 * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers. 1201 * @hw: pointer to hardware structure 1202 * 1203 * Configure DMA coalescing threshold per TC and set high priority bit for 1204 * FCOE TC. The dmac enable bit must be cleared before configuring. 1205 **/ 1206 s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw) 1207 { 1208 return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw), 1209 IXGBE_NOT_IMPLEMENTED); 1210 } 1211 1212 /** 1213 * ixgbe_setup_eee - Enable/disable EEE support 1214 * @hw: pointer to the HW structure 1215 * @enable_eee: boolean flag to enable EEE 1216 * 1217 * Enable/disable EEE based on enable_ee flag. 1218 * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C 1219 * are modified. 1220 * 1221 **/ 1222 s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee) 1223 { 1224 return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee), 1225 IXGBE_NOT_IMPLEMENTED); 1226 } 1227 1228 /** 1229 * ixgbe_set_source_address_pruning - Enable/Disable source address pruning 1230 * @hw: pointer to hardware structure 1231 * @enbale: enable or disable source address pruning 1232 * @pool: Rx pool - Rx pool to toggle source address pruning 1233 **/ 1234 void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable, 1235 unsigned int pool) 1236 { 1237 if (hw->mac.ops.set_source_address_pruning) 1238 hw->mac.ops.set_source_address_pruning(hw, enable, pool); 1239 } 1240 1241 /** 1242 * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing 1243 * @hw: pointer to hardware structure 1244 * @enable: enable or disable switch for Ethertype anti-spoofing 1245 * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing 1246 * 1247 **/ 1248 void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) 1249 { 1250 if (hw->mac.ops.set_ethertype_anti_spoofing) 1251 hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf); 1252 } 1253 1254 /** 1255 * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register 1256 * @hw: pointer to hardware structure 1257 * @reg_addr: 32 bit address of PHY register to read 1258 * @device_type: type of device you want to communicate with 1259 * @phy_data: Pointer to read data from PHY register 1260 * 1261 * Reads a value from a specified PHY register 1262 **/ 1263 s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, 1264 u32 device_type, u32 *phy_data) 1265 { 1266 return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr, 1267 device_type, phy_data), IXGBE_NOT_IMPLEMENTED); 1268 } 1269 1270 /** 1271 * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband 1272 * @hw: pointer to hardware structure 1273 * @reg_addr: 32 bit PHY register to write 1274 * @device_type: type of device you want to communicate with 1275 * @phy_data: Data to write to the PHY register 1276 * 1277 * Writes a value to specified PHY register 1278 **/ 1279 s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr, 1280 u32 device_type, u32 phy_data) 1281 { 1282 return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr, 1283 device_type, phy_data), IXGBE_NOT_IMPLEMENTED); 1284 } 1285 1286 /** 1287 * ixgbe_disable_mdd - Disable malicious driver detection 1288 * @hw: pointer to hardware structure 1289 * 1290 **/ 1291 void ixgbe_disable_mdd(struct ixgbe_hw *hw) 1292 { 1293 if (hw->mac.ops.disable_mdd) 1294 hw->mac.ops.disable_mdd(hw); 1295 } 1296 1297 /** 1298 * ixgbe_enable_mdd - Enable malicious driver detection 1299 * @hw: pointer to hardware structure 1300 * 1301 **/ 1302 void ixgbe_enable_mdd(struct ixgbe_hw *hw) 1303 { 1304 if (hw->mac.ops.enable_mdd) 1305 hw->mac.ops.enable_mdd(hw); 1306 } 1307 1308 /** 1309 * ixgbe_mdd_event - Handle malicious driver detection event 1310 * @hw: pointer to hardware structure 1311 * @vf_bitmap: vf bitmap of malicious vfs 1312 * 1313 **/ 1314 void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap) 1315 { 1316 if (hw->mac.ops.mdd_event) 1317 hw->mac.ops.mdd_event(hw, vf_bitmap); 1318 } 1319 1320 /** 1321 * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver 1322 * detection event 1323 * @hw: pointer to hardware structure 1324 * @vf: vf index 1325 * 1326 **/ 1327 void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf) 1328 { 1329 if (hw->mac.ops.restore_mdd_vf) 1330 hw->mac.ops.restore_mdd_vf(hw, vf); 1331 } 1332 1333 /** 1334 * ixgbe_enter_lplu - Transition to low power states 1335 * @hw: pointer to hardware structure 1336 * 1337 * Configures Low Power Link Up on transition to low power states 1338 * (from D0 to non-D0). 1339 **/ 1340 s32 ixgbe_enter_lplu(struct ixgbe_hw *hw) 1341 { 1342 return ixgbe_call_func(hw, hw->phy.ops.enter_lplu, (hw), 1343 IXGBE_NOT_IMPLEMENTED); 1344 } 1345 1346 /** 1347 * ixgbe_handle_lasi - Handle external Base T PHY interrupt 1348 * @hw: pointer to hardware structure 1349 * 1350 * Handle external Base T PHY interrupt. If high temperature 1351 * failure alarm then return error, else if link status change 1352 * then setup internal/external PHY link 1353 * 1354 * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature 1355 * failure alarm, else return PHY access status. 1356 */ 1357 s32 ixgbe_handle_lasi(struct ixgbe_hw *hw) 1358 { 1359 return ixgbe_call_func(hw, hw->phy.ops.handle_lasi, (hw), 1360 IXGBE_NOT_IMPLEMENTED); 1361 } 1362 1363 /** 1364 * ixgbe_read_analog_reg8 - Reads 8 bit analog register 1365 * @hw: pointer to hardware structure 1366 * @reg: analog register to read 1367 * @val: read value 1368 * 1369 * Performs write operation to analog register specified. 1370 **/ 1371 s32 ixgbe_read_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 *val) 1372 { 1373 return ixgbe_call_func(hw, hw->mac.ops.read_analog_reg8, (hw, reg, 1374 val), IXGBE_NOT_IMPLEMENTED); 1375 } 1376 1377 /** 1378 * ixgbe_write_analog_reg8 - Writes 8 bit analog register 1379 * @hw: pointer to hardware structure 1380 * @reg: analog register to write 1381 * @val: value to write 1382 * 1383 * Performs write operation to Atlas analog register specified. 1384 **/ 1385 s32 ixgbe_write_analog_reg8(struct ixgbe_hw *hw, u32 reg, u8 val) 1386 { 1387 return ixgbe_call_func(hw, hw->mac.ops.write_analog_reg8, (hw, reg, 1388 val), IXGBE_NOT_IMPLEMENTED); 1389 } 1390 1391 /** 1392 * ixgbe_init_uta_tables - Initializes Unicast Table Arrays. 1393 * @hw: pointer to hardware structure 1394 * 1395 * Initializes the Unicast Table Arrays to zero on device load. This 1396 * is part of the Rx init addr execution path. 1397 **/ 1398 s32 ixgbe_init_uta_tables(struct ixgbe_hw *hw) 1399 { 1400 return ixgbe_call_func(hw, hw->mac.ops.init_uta_tables, (hw), 1401 IXGBE_NOT_IMPLEMENTED); 1402 } 1403 1404 /** 1405 * ixgbe_read_i2c_byte - Reads 8 bit word over I2C at specified device address 1406 * @hw: pointer to hardware structure 1407 * @byte_offset: byte offset to read 1408 * @dev_addr: I2C bus address to read from 1409 * @data: value read 1410 * 1411 * Performs byte read operation to SFP module's EEPROM over I2C interface. 1412 **/ 1413 s32 ixgbe_read_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, 1414 u8 *data) 1415 { 1416 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte, (hw, byte_offset, 1417 dev_addr, data), IXGBE_NOT_IMPLEMENTED); 1418 } 1419 1420 /** 1421 * ixgbe_read_i2c_byte_unlocked - Reads 8 bit word via I2C from device address 1422 * @hw: pointer to hardware structure 1423 * @byte_offset: byte offset to read 1424 * @dev_addr: I2C bus address to read from 1425 * @data: value read 1426 * 1427 * Performs byte read operation to SFP module's EEPROM over I2C interface. 1428 **/ 1429 s32 ixgbe_read_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset, 1430 u8 dev_addr, u8 *data) 1431 { 1432 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_byte_unlocked, 1433 (hw, byte_offset, dev_addr, data), 1434 IXGBE_NOT_IMPLEMENTED); 1435 } 1436 1437 /** 1438 * ixgbe_read_i2c_combined - Perform I2C read combined operation 1439 * @hw: pointer to the hardware structure 1440 * @addr: I2C bus address to read from 1441 * @reg: I2C device register to read from 1442 * @val: pointer to location to receive read value 1443 * 1444 * Returns an error code on error. 1445 */ 1446 s32 ixgbe_read_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 *val) 1447 { 1448 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_combined, (hw, addr, 1449 reg, val), IXGBE_NOT_IMPLEMENTED); 1450 } 1451 1452 /** 1453 * ixgbe_read_i2c_combined_unlocked - Perform I2C read combined operation 1454 * @hw: pointer to the hardware structure 1455 * @addr: I2C bus address to read from 1456 * @reg: I2C device register to read from 1457 * @val: pointer to location to receive read value 1458 * 1459 * Returns an error code on error. 1460 **/ 1461 s32 ixgbe_read_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, 1462 u16 *val) 1463 { 1464 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_combined_unlocked, 1465 (hw, addr, reg, val), 1466 IXGBE_NOT_IMPLEMENTED); 1467 } 1468 1469 /** 1470 * ixgbe_write_i2c_byte - Writes 8 bit word over I2C 1471 * @hw: pointer to hardware structure 1472 * @byte_offset: byte offset to write 1473 * @dev_addr: I2C bus address to write to 1474 * @data: value to write 1475 * 1476 * Performs byte write operation to SFP module's EEPROM over I2C interface 1477 * at a specified device address. 1478 **/ 1479 s32 ixgbe_write_i2c_byte(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, 1480 u8 data) 1481 { 1482 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte, (hw, byte_offset, 1483 dev_addr, data), IXGBE_NOT_IMPLEMENTED); 1484 } 1485 1486 /** 1487 * ixgbe_write_i2c_byte_unlocked - Writes 8 bit word over I2C 1488 * @hw: pointer to hardware structure 1489 * @byte_offset: byte offset to write 1490 * @dev_addr: I2C bus address to write to 1491 * @data: value to write 1492 * 1493 * Performs byte write operation to SFP module's EEPROM over I2C interface 1494 * at a specified device address. 1495 **/ 1496 s32 ixgbe_write_i2c_byte_unlocked(struct ixgbe_hw *hw, u8 byte_offset, 1497 u8 dev_addr, u8 data) 1498 { 1499 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_byte_unlocked, 1500 (hw, byte_offset, dev_addr, data), 1501 IXGBE_NOT_IMPLEMENTED); 1502 } 1503 1504 /** 1505 * ixgbe_write_i2c_combined - Perform I2C write combined operation 1506 * @hw: pointer to the hardware structure 1507 * @addr: I2C bus address to write to 1508 * @reg: I2C device register to write to 1509 * @val: value to write 1510 * 1511 * Returns an error code on error. 1512 */ 1513 s32 ixgbe_write_i2c_combined(struct ixgbe_hw *hw, u8 addr, u16 reg, u16 val) 1514 { 1515 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_combined, (hw, addr, 1516 reg, val), IXGBE_NOT_IMPLEMENTED); 1517 } 1518 1519 /** 1520 * ixgbe_write_i2c_combined_unlocked - Perform I2C write combined operation 1521 * @hw: pointer to the hardware structure 1522 * @addr: I2C bus address to write to 1523 * @reg: I2C device register to write to 1524 * @val: value to write 1525 * 1526 * Returns an error code on error. 1527 **/ 1528 s32 ixgbe_write_i2c_combined_unlocked(struct ixgbe_hw *hw, u8 addr, u16 reg, 1529 u16 val) 1530 { 1531 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_combined_unlocked, 1532 (hw, addr, reg, val), IXGBE_NOT_IMPLEMENTED); 1533 } 1534 1535 /** 1536 * ixgbe_write_i2c_eeprom - Writes 8 bit EEPROM word over I2C interface 1537 * @hw: pointer to hardware structure 1538 * @byte_offset: EEPROM byte offset to write 1539 * @eeprom_data: value to write 1540 * 1541 * Performs byte write operation to SFP module's EEPROM over I2C interface. 1542 **/ 1543 s32 ixgbe_write_i2c_eeprom(struct ixgbe_hw *hw, 1544 u8 byte_offset, u8 eeprom_data) 1545 { 1546 return ixgbe_call_func(hw, hw->phy.ops.write_i2c_eeprom, 1547 (hw, byte_offset, eeprom_data), 1548 IXGBE_NOT_IMPLEMENTED); 1549 } 1550 1551 /** 1552 * ixgbe_read_i2c_eeprom - Reads 8 bit EEPROM word over I2C interface 1553 * @hw: pointer to hardware structure 1554 * @byte_offset: EEPROM byte offset to read 1555 * @eeprom_data: value read 1556 * 1557 * Performs byte read operation to SFP module's EEPROM over I2C interface. 1558 **/ 1559 s32 ixgbe_read_i2c_eeprom(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data) 1560 { 1561 return ixgbe_call_func(hw, hw->phy.ops.read_i2c_eeprom, 1562 (hw, byte_offset, eeprom_data), 1563 IXGBE_NOT_IMPLEMENTED); 1564 } 1565 1566 /** 1567 * ixgbe_get_supported_physical_layer - Returns physical layer type 1568 * @hw: pointer to hardware structure 1569 * 1570 * Determines physical layer capabilities of the current configuration. 1571 **/ 1572 u32 ixgbe_get_supported_physical_layer(struct ixgbe_hw *hw) 1573 { 1574 return ixgbe_call_func(hw, hw->mac.ops.get_supported_physical_layer, 1575 (hw), IXGBE_PHYSICAL_LAYER_UNKNOWN); 1576 } 1577 1578 /** 1579 * ixgbe_enable_rx_dma - Enables Rx DMA unit, dependent on device specifics 1580 * @hw: pointer to hardware structure 1581 * @regval: bitfield to write to the Rx DMA register 1582 * 1583 * Enables the Rx DMA unit of the device. 1584 **/ 1585 s32 ixgbe_enable_rx_dma(struct ixgbe_hw *hw, u32 regval) 1586 { 1587 return ixgbe_call_func(hw, hw->mac.ops.enable_rx_dma, 1588 (hw, regval), IXGBE_NOT_IMPLEMENTED); 1589 } 1590 1591 /** 1592 * ixgbe_disable_sec_rx_path - Stops the receive data path 1593 * @hw: pointer to hardware structure 1594 * 1595 * Stops the receive data path. 1596 **/ 1597 s32 ixgbe_disable_sec_rx_path(struct ixgbe_hw *hw) 1598 { 1599 return ixgbe_call_func(hw, hw->mac.ops.disable_sec_rx_path, 1600 (hw), IXGBE_NOT_IMPLEMENTED); 1601 } 1602 1603 /** 1604 * ixgbe_enable_sec_rx_path - Enables the receive data path 1605 * @hw: pointer to hardware structure 1606 * 1607 * Enables the receive data path. 1608 **/ 1609 s32 ixgbe_enable_sec_rx_path(struct ixgbe_hw *hw) 1610 { 1611 return ixgbe_call_func(hw, hw->mac.ops.enable_sec_rx_path, 1612 (hw), IXGBE_NOT_IMPLEMENTED); 1613 } 1614 1615 /** 1616 * ixgbe_acquire_swfw_semaphore - Acquire SWFW semaphore 1617 * @hw: pointer to hardware structure 1618 * @mask: Mask to specify which semaphore to acquire 1619 * 1620 * Acquires the SWFW semaphore through SW_FW_SYNC register for the specified 1621 * function (CSR, PHY0, PHY1, EEPROM, Flash) 1622 **/ 1623 s32 ixgbe_acquire_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) 1624 { 1625 return ixgbe_call_func(hw, hw->mac.ops.acquire_swfw_sync, 1626 (hw, mask), IXGBE_NOT_IMPLEMENTED); 1627 } 1628 1629 /** 1630 * ixgbe_release_swfw_semaphore - Release SWFW semaphore 1631 * @hw: pointer to hardware structure 1632 * @mask: Mask to specify which semaphore to release 1633 * 1634 * Releases the SWFW semaphore through SW_FW_SYNC register for the specified 1635 * function (CSR, PHY0, PHY1, EEPROM, Flash) 1636 **/ 1637 void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask) 1638 { 1639 if (hw->mac.ops.release_swfw_sync) 1640 hw->mac.ops.release_swfw_sync(hw, mask); 1641 } 1642 1643 1644 void ixgbe_disable_rx(struct ixgbe_hw *hw) 1645 { 1646 if (hw->mac.ops.disable_rx) 1647 hw->mac.ops.disable_rx(hw); 1648 } 1649 1650 void ixgbe_enable_rx(struct ixgbe_hw *hw) 1651 { 1652 if (hw->mac.ops.enable_rx) 1653 hw->mac.ops.enable_rx(hw); 1654 } 1655 1656 /** 1657 * ixgbe_set_rate_select_speed - Set module link speed 1658 * @hw: pointer to hardware structure 1659 * @speed: link speed to set 1660 * 1661 * Set module link speed via the rate select. 1662 */ 1663 void ixgbe_set_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed) 1664 { 1665 if (hw->mac.ops.set_rate_select_speed) 1666 hw->mac.ops.set_rate_select_speed(hw, speed); 1667 } 1668