1 /******************************************************************************* 2 3 Copyright (c) 2001-2015, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ***************************************************************************/ 33 34 #include "e1000_api.h" 35 36 /** 37 * e1000_init_mac_params - Initialize MAC function pointers 38 * @hw: pointer to the HW structure 39 * 40 * This function initializes the function pointers for the MAC 41 * set of functions. Called by drivers or by e1000_setup_init_funcs. 42 **/ 43 s32 e1000_init_mac_params(struct e1000_hw *hw) 44 { 45 s32 ret_val = E1000_SUCCESS; 46 47 if (hw->mac.ops.init_params) { 48 ret_val = hw->mac.ops.init_params(hw); 49 if (ret_val) { 50 DEBUGOUT("MAC Initialization Error\n"); 51 goto out; 52 } 53 } else { 54 DEBUGOUT("mac.init_mac_params was NULL\n"); 55 ret_val = -E1000_ERR_CONFIG; 56 } 57 58 out: 59 return ret_val; 60 } 61 62 /** 63 * e1000_init_nvm_params - Initialize NVM function pointers 64 * @hw: pointer to the HW structure 65 * 66 * This function initializes the function pointers for the NVM 67 * set of functions. Called by drivers or by e1000_setup_init_funcs. 68 **/ 69 s32 e1000_init_nvm_params(struct e1000_hw *hw) 70 { 71 s32 ret_val = E1000_SUCCESS; 72 73 if (hw->nvm.ops.init_params) { 74 ret_val = hw->nvm.ops.init_params(hw); 75 if (ret_val) { 76 DEBUGOUT("NVM Initialization Error\n"); 77 goto out; 78 } 79 } else { 80 DEBUGOUT("nvm.init_nvm_params was NULL\n"); 81 ret_val = -E1000_ERR_CONFIG; 82 } 83 84 out: 85 return ret_val; 86 } 87 88 /** 89 * e1000_init_phy_params - Initialize PHY function pointers 90 * @hw: pointer to the HW structure 91 * 92 * This function initializes the function pointers for the PHY 93 * set of functions. Called by drivers or by e1000_setup_init_funcs. 94 **/ 95 s32 e1000_init_phy_params(struct e1000_hw *hw) 96 { 97 s32 ret_val = E1000_SUCCESS; 98 99 if (hw->phy.ops.init_params) { 100 ret_val = hw->phy.ops.init_params(hw); 101 if (ret_val) { 102 DEBUGOUT("PHY Initialization Error\n"); 103 goto out; 104 } 105 } else { 106 DEBUGOUT("phy.init_phy_params was NULL\n"); 107 ret_val = -E1000_ERR_CONFIG; 108 } 109 110 out: 111 return ret_val; 112 } 113 114 /** 115 * e1000_init_mbx_params - Initialize mailbox function pointers 116 * @hw: pointer to the HW structure 117 * 118 * This function initializes the function pointers for the PHY 119 * set of functions. Called by drivers or by e1000_setup_init_funcs. 120 **/ 121 s32 e1000_init_mbx_params(struct e1000_hw *hw) 122 { 123 s32 ret_val = E1000_SUCCESS; 124 125 if (hw->mbx.ops.init_params) { 126 ret_val = hw->mbx.ops.init_params(hw); 127 if (ret_val) { 128 DEBUGOUT("Mailbox Initialization Error\n"); 129 goto out; 130 } 131 } else { 132 DEBUGOUT("mbx.init_mbx_params was NULL\n"); 133 ret_val = -E1000_ERR_CONFIG; 134 } 135 136 out: 137 return ret_val; 138 } 139 140 /** 141 * e1000_set_mac_type - Sets MAC type 142 * @hw: pointer to the HW structure 143 * 144 * This function sets the mac type of the adapter based on the 145 * device ID stored in the hw structure. 146 * MUST BE FIRST FUNCTION CALLED (explicitly or through 147 * e1000_setup_init_funcs()). 148 **/ 149 s32 e1000_set_mac_type(struct e1000_hw *hw) 150 { 151 struct e1000_mac_info *mac = &hw->mac; 152 s32 ret_val = E1000_SUCCESS; 153 154 DEBUGFUNC("e1000_set_mac_type"); 155 156 switch (hw->device_id) { 157 case E1000_DEV_ID_82542: 158 mac->type = e1000_82542; 159 break; 160 case E1000_DEV_ID_82543GC_FIBER: 161 case E1000_DEV_ID_82543GC_COPPER: 162 mac->type = e1000_82543; 163 break; 164 case E1000_DEV_ID_82544EI_COPPER: 165 case E1000_DEV_ID_82544EI_FIBER: 166 case E1000_DEV_ID_82544GC_COPPER: 167 case E1000_DEV_ID_82544GC_LOM: 168 mac->type = e1000_82544; 169 break; 170 case E1000_DEV_ID_82540EM: 171 case E1000_DEV_ID_82540EM_LOM: 172 case E1000_DEV_ID_82540EP: 173 case E1000_DEV_ID_82540EP_LOM: 174 case E1000_DEV_ID_82540EP_LP: 175 mac->type = e1000_82540; 176 break; 177 case E1000_DEV_ID_82545EM_COPPER: 178 case E1000_DEV_ID_82545EM_FIBER: 179 mac->type = e1000_82545; 180 break; 181 case E1000_DEV_ID_82545GM_COPPER: 182 case E1000_DEV_ID_82545GM_FIBER: 183 case E1000_DEV_ID_82545GM_SERDES: 184 mac->type = e1000_82545_rev_3; 185 break; 186 case E1000_DEV_ID_82546EB_COPPER: 187 case E1000_DEV_ID_82546EB_FIBER: 188 case E1000_DEV_ID_82546EB_QUAD_COPPER: 189 mac->type = e1000_82546; 190 break; 191 case E1000_DEV_ID_82546GB_COPPER: 192 case E1000_DEV_ID_82546GB_FIBER: 193 case E1000_DEV_ID_82546GB_SERDES: 194 case E1000_DEV_ID_82546GB_PCIE: 195 case E1000_DEV_ID_82546GB_QUAD_COPPER: 196 case E1000_DEV_ID_82546GB_QUAD_COPPER_KSP3: 197 mac->type = e1000_82546_rev_3; 198 break; 199 case E1000_DEV_ID_82541EI: 200 case E1000_DEV_ID_82541EI_MOBILE: 201 case E1000_DEV_ID_82541ER_LOM: 202 mac->type = e1000_82541; 203 break; 204 case E1000_DEV_ID_82541ER: 205 case E1000_DEV_ID_82541GI: 206 case E1000_DEV_ID_82541GI_LF: 207 case E1000_DEV_ID_82541GI_MOBILE: 208 mac->type = e1000_82541_rev_2; 209 break; 210 case E1000_DEV_ID_82547EI: 211 case E1000_DEV_ID_82547EI_MOBILE: 212 mac->type = e1000_82547; 213 break; 214 case E1000_DEV_ID_82547GI: 215 mac->type = e1000_82547_rev_2; 216 break; 217 case E1000_DEV_ID_82571EB_COPPER: 218 case E1000_DEV_ID_82571EB_FIBER: 219 case E1000_DEV_ID_82571EB_SERDES: 220 case E1000_DEV_ID_82571EB_SERDES_DUAL: 221 case E1000_DEV_ID_82571EB_SERDES_QUAD: 222 case E1000_DEV_ID_82571EB_QUAD_COPPER: 223 case E1000_DEV_ID_82571PT_QUAD_COPPER: 224 case E1000_DEV_ID_82571EB_QUAD_FIBER: 225 case E1000_DEV_ID_82571EB_QUAD_COPPER_LP: 226 mac->type = e1000_82571; 227 break; 228 case E1000_DEV_ID_82572EI: 229 case E1000_DEV_ID_82572EI_COPPER: 230 case E1000_DEV_ID_82572EI_FIBER: 231 case E1000_DEV_ID_82572EI_SERDES: 232 mac->type = e1000_82572; 233 break; 234 case E1000_DEV_ID_82573E: 235 case E1000_DEV_ID_82573E_IAMT: 236 case E1000_DEV_ID_82573L: 237 mac->type = e1000_82573; 238 break; 239 case E1000_DEV_ID_82574L: 240 case E1000_DEV_ID_82574LA: 241 mac->type = e1000_82574; 242 break; 243 case E1000_DEV_ID_82583V: 244 mac->type = e1000_82583; 245 break; 246 case E1000_DEV_ID_80003ES2LAN_COPPER_DPT: 247 case E1000_DEV_ID_80003ES2LAN_SERDES_DPT: 248 case E1000_DEV_ID_80003ES2LAN_COPPER_SPT: 249 case E1000_DEV_ID_80003ES2LAN_SERDES_SPT: 250 mac->type = e1000_80003es2lan; 251 break; 252 case E1000_DEV_ID_ICH8_IFE: 253 case E1000_DEV_ID_ICH8_IFE_GT: 254 case E1000_DEV_ID_ICH8_IFE_G: 255 case E1000_DEV_ID_ICH8_IGP_M: 256 case E1000_DEV_ID_ICH8_IGP_M_AMT: 257 case E1000_DEV_ID_ICH8_IGP_AMT: 258 case E1000_DEV_ID_ICH8_IGP_C: 259 case E1000_DEV_ID_ICH8_82567V_3: 260 mac->type = e1000_ich8lan; 261 break; 262 case E1000_DEV_ID_ICH9_IFE: 263 case E1000_DEV_ID_ICH9_IFE_GT: 264 case E1000_DEV_ID_ICH9_IFE_G: 265 case E1000_DEV_ID_ICH9_IGP_M: 266 case E1000_DEV_ID_ICH9_IGP_M_AMT: 267 case E1000_DEV_ID_ICH9_IGP_M_V: 268 case E1000_DEV_ID_ICH9_IGP_AMT: 269 case E1000_DEV_ID_ICH9_BM: 270 case E1000_DEV_ID_ICH9_IGP_C: 271 case E1000_DEV_ID_ICH10_R_BM_LM: 272 case E1000_DEV_ID_ICH10_R_BM_LF: 273 case E1000_DEV_ID_ICH10_R_BM_V: 274 mac->type = e1000_ich9lan; 275 break; 276 case E1000_DEV_ID_ICH10_D_BM_LM: 277 case E1000_DEV_ID_ICH10_D_BM_LF: 278 case E1000_DEV_ID_ICH10_D_BM_V: 279 mac->type = e1000_ich10lan; 280 break; 281 case E1000_DEV_ID_PCH_D_HV_DM: 282 case E1000_DEV_ID_PCH_D_HV_DC: 283 case E1000_DEV_ID_PCH_M_HV_LM: 284 case E1000_DEV_ID_PCH_M_HV_LC: 285 mac->type = e1000_pchlan; 286 break; 287 case E1000_DEV_ID_PCH2_LV_LM: 288 case E1000_DEV_ID_PCH2_LV_V: 289 mac->type = e1000_pch2lan; 290 break; 291 case E1000_DEV_ID_PCH_LPT_I217_LM: 292 case E1000_DEV_ID_PCH_LPT_I217_V: 293 case E1000_DEV_ID_PCH_LPTLP_I218_LM: 294 case E1000_DEV_ID_PCH_LPTLP_I218_V: 295 case E1000_DEV_ID_PCH_I218_LM2: 296 case E1000_DEV_ID_PCH_I218_V2: 297 case E1000_DEV_ID_PCH_I218_LM3: 298 case E1000_DEV_ID_PCH_I218_V3: 299 mac->type = e1000_pch_lpt; 300 break; 301 case E1000_DEV_ID_PCH_SPT_I219_LM: 302 case E1000_DEV_ID_PCH_SPT_I219_V: 303 case E1000_DEV_ID_PCH_SPT_I219_LM2: 304 case E1000_DEV_ID_PCH_SPT_I219_V2: 305 case E1000_DEV_ID_PCH_LBG_I219_LM3: 306 case E1000_DEV_ID_PCH_SPT_I219_LM4: 307 case E1000_DEV_ID_PCH_SPT_I219_V4: 308 case E1000_DEV_ID_PCH_SPT_I219_LM5: 309 case E1000_DEV_ID_PCH_SPT_I219_V5: 310 mac->type = e1000_pch_spt; 311 break; 312 case E1000_DEV_ID_PCH_CNP_I219_LM6: 313 case E1000_DEV_ID_PCH_CNP_I219_V6: 314 case E1000_DEV_ID_PCH_CNP_I219_LM7: 315 case E1000_DEV_ID_PCH_CNP_I219_V7: 316 mac->type = e1000_pch_cnp; 317 break; 318 case E1000_DEV_ID_82575EB_COPPER: 319 case E1000_DEV_ID_82575EB_FIBER_SERDES: 320 case E1000_DEV_ID_82575GB_QUAD_COPPER: 321 mac->type = e1000_82575; 322 break; 323 case E1000_DEV_ID_82576: 324 case E1000_DEV_ID_82576_FIBER: 325 case E1000_DEV_ID_82576_SERDES: 326 case E1000_DEV_ID_82576_QUAD_COPPER: 327 case E1000_DEV_ID_82576_QUAD_COPPER_ET2: 328 case E1000_DEV_ID_82576_NS: 329 case E1000_DEV_ID_82576_NS_SERDES: 330 case E1000_DEV_ID_82576_SERDES_QUAD: 331 mac->type = e1000_82576; 332 break; 333 case E1000_DEV_ID_82580_COPPER: 334 case E1000_DEV_ID_82580_FIBER: 335 case E1000_DEV_ID_82580_SERDES: 336 case E1000_DEV_ID_82580_SGMII: 337 case E1000_DEV_ID_82580_COPPER_DUAL: 338 case E1000_DEV_ID_82580_QUAD_FIBER: 339 case E1000_DEV_ID_DH89XXCC_SGMII: 340 case E1000_DEV_ID_DH89XXCC_SERDES: 341 case E1000_DEV_ID_DH89XXCC_BACKPLANE: 342 case E1000_DEV_ID_DH89XXCC_SFP: 343 mac->type = e1000_82580; 344 break; 345 case E1000_DEV_ID_I350_COPPER: 346 case E1000_DEV_ID_I350_FIBER: 347 case E1000_DEV_ID_I350_SERDES: 348 case E1000_DEV_ID_I350_SGMII: 349 case E1000_DEV_ID_I350_DA4: 350 mac->type = e1000_i350; 351 break; 352 case E1000_DEV_ID_I210_COPPER_FLASHLESS: 353 case E1000_DEV_ID_I210_SERDES_FLASHLESS: 354 case E1000_DEV_ID_I210_COPPER: 355 case E1000_DEV_ID_I210_COPPER_OEM1: 356 case E1000_DEV_ID_I210_COPPER_IT: 357 case E1000_DEV_ID_I210_FIBER: 358 case E1000_DEV_ID_I210_SERDES: 359 case E1000_DEV_ID_I210_SGMII: 360 mac->type = e1000_i210; 361 break; 362 case E1000_DEV_ID_I211_COPPER: 363 mac->type = e1000_i211; 364 break; 365 case E1000_DEV_ID_82576_VF: 366 case E1000_DEV_ID_82576_VF_HV: 367 mac->type = e1000_vfadapt; 368 break; 369 case E1000_DEV_ID_I350_VF: 370 case E1000_DEV_ID_I350_VF_HV: 371 mac->type = e1000_vfadapt_i350; 372 break; 373 374 case E1000_DEV_ID_I354_BACKPLANE_1GBPS: 375 case E1000_DEV_ID_I354_SGMII: 376 case E1000_DEV_ID_I354_BACKPLANE_2_5GBPS: 377 mac->type = e1000_i354; 378 break; 379 default: 380 /* Should never have loaded on this device */ 381 ret_val = -E1000_ERR_MAC_INIT; 382 break; 383 } 384 385 return ret_val; 386 } 387 388 /** 389 * e1000_setup_init_funcs - Initializes function pointers 390 * @hw: pointer to the HW structure 391 * @init_device: true will initialize the rest of the function pointers 392 * getting the device ready for use. false will only set 393 * MAC type and the function pointers for the other init 394 * functions. Passing false will not generate any hardware 395 * reads or writes. 396 * 397 * This function must be called by a driver in order to use the rest 398 * of the 'shared' code files. Called by drivers only. 399 **/ 400 s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device) 401 { 402 s32 ret_val; 403 404 /* Can't do much good without knowing the MAC type. */ 405 ret_val = e1000_set_mac_type(hw); 406 if (ret_val) { 407 DEBUGOUT("ERROR: MAC type could not be set properly.\n"); 408 goto out; 409 } 410 411 if (!hw->hw_addr) { 412 DEBUGOUT("ERROR: Registers not mapped\n"); 413 ret_val = -E1000_ERR_CONFIG; 414 goto out; 415 } 416 417 /* 418 * Init function pointers to generic implementations. We do this first 419 * allowing a driver module to override it afterward. 420 */ 421 e1000_init_mac_ops_generic(hw); 422 e1000_init_phy_ops_generic(hw); 423 e1000_init_nvm_ops_generic(hw); 424 e1000_init_mbx_ops_generic(hw); 425 426 /* 427 * Set up the init function pointers. These are functions within the 428 * adapter family file that sets up function pointers for the rest of 429 * the functions in that family. 430 */ 431 switch (hw->mac.type) { 432 case e1000_82542: 433 e1000_init_function_pointers_82542(hw); 434 break; 435 case e1000_82543: 436 case e1000_82544: 437 e1000_init_function_pointers_82543(hw); 438 break; 439 case e1000_82540: 440 case e1000_82545: 441 case e1000_82545_rev_3: 442 case e1000_82546: 443 case e1000_82546_rev_3: 444 e1000_init_function_pointers_82540(hw); 445 break; 446 case e1000_82541: 447 case e1000_82541_rev_2: 448 case e1000_82547: 449 case e1000_82547_rev_2: 450 e1000_init_function_pointers_82541(hw); 451 break; 452 case e1000_82571: 453 case e1000_82572: 454 case e1000_82573: 455 case e1000_82574: 456 case e1000_82583: 457 e1000_init_function_pointers_82571(hw); 458 break; 459 case e1000_80003es2lan: 460 e1000_init_function_pointers_80003es2lan(hw); 461 break; 462 case e1000_ich8lan: 463 case e1000_ich9lan: 464 case e1000_ich10lan: 465 case e1000_pchlan: 466 case e1000_pch2lan: 467 case e1000_pch_lpt: 468 case e1000_pch_spt: 469 case e1000_pch_cnp: 470 e1000_init_function_pointers_ich8lan(hw); 471 break; 472 case e1000_82575: 473 case e1000_82576: 474 case e1000_82580: 475 case e1000_i350: 476 case e1000_i354: 477 e1000_init_function_pointers_82575(hw); 478 break; 479 case e1000_i210: 480 case e1000_i211: 481 e1000_init_function_pointers_i210(hw); 482 break; 483 case e1000_vfadapt: 484 e1000_init_function_pointers_vf(hw); 485 break; 486 case e1000_vfadapt_i350: 487 e1000_init_function_pointers_vf(hw); 488 break; 489 default: 490 DEBUGOUT("Hardware not supported\n"); 491 ret_val = -E1000_ERR_CONFIG; 492 break; 493 } 494 495 /* 496 * Initialize the rest of the function pointers. These require some 497 * register reads/writes in some cases. 498 */ 499 if (!(ret_val) && init_device) { 500 ret_val = e1000_init_mac_params(hw); 501 if (ret_val) 502 goto out; 503 504 ret_val = e1000_init_nvm_params(hw); 505 if (ret_val) 506 goto out; 507 508 ret_val = e1000_init_phy_params(hw); 509 if (ret_val) 510 goto out; 511 512 ret_val = e1000_init_mbx_params(hw); 513 if (ret_val) 514 goto out; 515 } 516 517 out: 518 return ret_val; 519 } 520 521 /** 522 * e1000_get_bus_info - Obtain bus information for adapter 523 * @hw: pointer to the HW structure 524 * 525 * This will obtain information about the HW bus for which the 526 * adapter is attached and stores it in the hw structure. This is a 527 * function pointer entry point called by drivers. 528 **/ 529 s32 e1000_get_bus_info(struct e1000_hw *hw) 530 { 531 if (hw->mac.ops.get_bus_info) 532 return hw->mac.ops.get_bus_info(hw); 533 534 return E1000_SUCCESS; 535 } 536 537 /** 538 * e1000_clear_vfta - Clear VLAN filter table 539 * @hw: pointer to the HW structure 540 * 541 * This clears the VLAN filter table on the adapter. This is a function 542 * pointer entry point called by drivers. 543 **/ 544 void e1000_clear_vfta(struct e1000_hw *hw) 545 { 546 if (hw->mac.ops.clear_vfta) 547 hw->mac.ops.clear_vfta(hw); 548 } 549 550 /** 551 * e1000_write_vfta - Write value to VLAN filter table 552 * @hw: pointer to the HW structure 553 * @offset: the 32-bit offset in which to write the value to. 554 * @value: the 32-bit value to write at location offset. 555 * 556 * This writes a 32-bit value to a 32-bit offset in the VLAN filter 557 * table. This is a function pointer entry point called by drivers. 558 **/ 559 void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) 560 { 561 if (hw->mac.ops.write_vfta) 562 hw->mac.ops.write_vfta(hw, offset, value); 563 } 564 565 /** 566 * e1000_update_mc_addr_list - Update Multicast addresses 567 * @hw: pointer to the HW structure 568 * @mc_addr_list: array of multicast addresses to program 569 * @mc_addr_count: number of multicast addresses to program 570 * 571 * Updates the Multicast Table Array. 572 * The caller must have a packed mc_addr_list of multicast addresses. 573 **/ 574 void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, 575 u32 mc_addr_count) 576 { 577 if (hw->mac.ops.update_mc_addr_list) 578 hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, 579 mc_addr_count); 580 } 581 582 /** 583 * e1000_force_mac_fc - Force MAC flow control 584 * @hw: pointer to the HW structure 585 * 586 * Force the MAC's flow control settings. Currently no func pointer exists 587 * and all implementations are handled in the generic version of this 588 * function. 589 **/ 590 s32 e1000_force_mac_fc(struct e1000_hw *hw) 591 { 592 return e1000_force_mac_fc_generic(hw); 593 } 594 595 /** 596 * e1000_check_for_link - Check/Store link connection 597 * @hw: pointer to the HW structure 598 * 599 * This checks the link condition of the adapter and stores the 600 * results in the hw->mac structure. This is a function pointer entry 601 * point called by drivers. 602 **/ 603 s32 e1000_check_for_link(struct e1000_hw *hw) 604 { 605 if (hw->mac.ops.check_for_link) 606 return hw->mac.ops.check_for_link(hw); 607 608 return -E1000_ERR_CONFIG; 609 } 610 611 /** 612 * e1000_check_mng_mode - Check management mode 613 * @hw: pointer to the HW structure 614 * 615 * This checks if the adapter has manageability enabled. 616 * This is a function pointer entry point called by drivers. 617 **/ 618 bool e1000_check_mng_mode(struct e1000_hw *hw) 619 { 620 if (hw->mac.ops.check_mng_mode) 621 return hw->mac.ops.check_mng_mode(hw); 622 623 return false; 624 } 625 626 /** 627 * e1000_mng_write_dhcp_info - Writes DHCP info to host interface 628 * @hw: pointer to the HW structure 629 * @buffer: pointer to the host interface 630 * @length: size of the buffer 631 * 632 * Writes the DHCP information to the host interface. 633 **/ 634 s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length) 635 { 636 return e1000_mng_write_dhcp_info_generic(hw, buffer, length); 637 } 638 639 /** 640 * e1000_reset_hw - Reset hardware 641 * @hw: pointer to the HW structure 642 * 643 * This resets the hardware into a known state. This is a function pointer 644 * entry point called by drivers. 645 **/ 646 s32 e1000_reset_hw(struct e1000_hw *hw) 647 { 648 if (hw->mac.ops.reset_hw) 649 return hw->mac.ops.reset_hw(hw); 650 651 return -E1000_ERR_CONFIG; 652 } 653 654 /** 655 * e1000_init_hw - Initialize hardware 656 * @hw: pointer to the HW structure 657 * 658 * This inits the hardware readying it for operation. This is a function 659 * pointer entry point called by drivers. 660 **/ 661 s32 e1000_init_hw(struct e1000_hw *hw) 662 { 663 if (hw->mac.ops.init_hw) 664 return hw->mac.ops.init_hw(hw); 665 666 return -E1000_ERR_CONFIG; 667 } 668 669 /** 670 * e1000_setup_link - Configures link and flow control 671 * @hw: pointer to the HW structure 672 * 673 * This configures link and flow control settings for the adapter. This 674 * is a function pointer entry point called by drivers. While modules can 675 * also call this, they probably call their own version of this function. 676 **/ 677 s32 e1000_setup_link(struct e1000_hw *hw) 678 { 679 if (hw->mac.ops.setup_link) 680 return hw->mac.ops.setup_link(hw); 681 682 return -E1000_ERR_CONFIG; 683 } 684 685 /** 686 * e1000_get_speed_and_duplex - Returns current speed and duplex 687 * @hw: pointer to the HW structure 688 * @speed: pointer to a 16-bit value to store the speed 689 * @duplex: pointer to a 16-bit value to store the duplex. 690 * 691 * This returns the speed and duplex of the adapter in the two 'out' 692 * variables passed in. This is a function pointer entry point called 693 * by drivers. 694 **/ 695 s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex) 696 { 697 if (hw->mac.ops.get_link_up_info) 698 return hw->mac.ops.get_link_up_info(hw, speed, duplex); 699 700 return -E1000_ERR_CONFIG; 701 } 702 703 /** 704 * e1000_setup_led - Configures SW controllable LED 705 * @hw: pointer to the HW structure 706 * 707 * This prepares the SW controllable LED for use and saves the current state 708 * of the LED so it can be later restored. This is a function pointer entry 709 * point called by drivers. 710 **/ 711 s32 e1000_setup_led(struct e1000_hw *hw) 712 { 713 if (hw->mac.ops.setup_led) 714 return hw->mac.ops.setup_led(hw); 715 716 return E1000_SUCCESS; 717 } 718 719 /** 720 * e1000_cleanup_led - Restores SW controllable LED 721 * @hw: pointer to the HW structure 722 * 723 * This restores the SW controllable LED to the value saved off by 724 * e1000_setup_led. This is a function pointer entry point called by drivers. 725 **/ 726 s32 e1000_cleanup_led(struct e1000_hw *hw) 727 { 728 if (hw->mac.ops.cleanup_led) 729 return hw->mac.ops.cleanup_led(hw); 730 731 return E1000_SUCCESS; 732 } 733 734 /** 735 * e1000_blink_led - Blink SW controllable LED 736 * @hw: pointer to the HW structure 737 * 738 * This starts the adapter LED blinking. Request the LED to be setup first 739 * and cleaned up after. This is a function pointer entry point called by 740 * drivers. 741 **/ 742 s32 e1000_blink_led(struct e1000_hw *hw) 743 { 744 if (hw->mac.ops.blink_led) 745 return hw->mac.ops.blink_led(hw); 746 747 return E1000_SUCCESS; 748 } 749 750 /** 751 * e1000_id_led_init - store LED configurations in SW 752 * @hw: pointer to the HW structure 753 * 754 * Initializes the LED config in SW. This is a function pointer entry point 755 * called by drivers. 756 **/ 757 s32 e1000_id_led_init(struct e1000_hw *hw) 758 { 759 if (hw->mac.ops.id_led_init) 760 return hw->mac.ops.id_led_init(hw); 761 762 return E1000_SUCCESS; 763 } 764 765 /** 766 * e1000_led_on - Turn on SW controllable LED 767 * @hw: pointer to the HW structure 768 * 769 * Turns the SW defined LED on. This is a function pointer entry point 770 * called by drivers. 771 **/ 772 s32 e1000_led_on(struct e1000_hw *hw) 773 { 774 if (hw->mac.ops.led_on) 775 return hw->mac.ops.led_on(hw); 776 777 return E1000_SUCCESS; 778 } 779 780 /** 781 * e1000_led_off - Turn off SW controllable LED 782 * @hw: pointer to the HW structure 783 * 784 * Turns the SW defined LED off. This is a function pointer entry point 785 * called by drivers. 786 **/ 787 s32 e1000_led_off(struct e1000_hw *hw) 788 { 789 if (hw->mac.ops.led_off) 790 return hw->mac.ops.led_off(hw); 791 792 return E1000_SUCCESS; 793 } 794 795 /** 796 * e1000_reset_adaptive - Reset adaptive IFS 797 * @hw: pointer to the HW structure 798 * 799 * Resets the adaptive IFS. Currently no func pointer exists and all 800 * implementations are handled in the generic version of this function. 801 **/ 802 void e1000_reset_adaptive(struct e1000_hw *hw) 803 { 804 e1000_reset_adaptive_generic(hw); 805 } 806 807 /** 808 * e1000_update_adaptive - Update adaptive IFS 809 * @hw: pointer to the HW structure 810 * 811 * Updates adapter IFS. Currently no func pointer exists and all 812 * implementations are handled in the generic version of this function. 813 **/ 814 void e1000_update_adaptive(struct e1000_hw *hw) 815 { 816 e1000_update_adaptive_generic(hw); 817 } 818 819 /** 820 * e1000_disable_pcie_master - Disable PCI-Express master access 821 * @hw: pointer to the HW structure 822 * 823 * Disables PCI-Express master access and verifies there are no pending 824 * requests. Currently no func pointer exists and all implementations are 825 * handled in the generic version of this function. 826 **/ 827 s32 e1000_disable_pcie_master(struct e1000_hw *hw) 828 { 829 return e1000_disable_pcie_master_generic(hw); 830 } 831 832 /** 833 * e1000_config_collision_dist - Configure collision distance 834 * @hw: pointer to the HW structure 835 * 836 * Configures the collision distance to the default value and is used 837 * during link setup. 838 **/ 839 void e1000_config_collision_dist(struct e1000_hw *hw) 840 { 841 if (hw->mac.ops.config_collision_dist) 842 hw->mac.ops.config_collision_dist(hw); 843 } 844 845 /** 846 * e1000_rar_set - Sets a receive address register 847 * @hw: pointer to the HW structure 848 * @addr: address to set the RAR to 849 * @index: the RAR to set 850 * 851 * Sets a Receive Address Register (RAR) to the specified address. 852 **/ 853 int e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index) 854 { 855 if (hw->mac.ops.rar_set) 856 return hw->mac.ops.rar_set(hw, addr, index); 857 858 return E1000_SUCCESS; 859 } 860 861 /** 862 * e1000_validate_mdi_setting - Ensures valid MDI/MDIX SW state 863 * @hw: pointer to the HW structure 864 * 865 * Ensures that the MDI/MDIX SW state is valid. 866 **/ 867 s32 e1000_validate_mdi_setting(struct e1000_hw *hw) 868 { 869 if (hw->mac.ops.validate_mdi_setting) 870 return hw->mac.ops.validate_mdi_setting(hw); 871 872 return E1000_SUCCESS; 873 } 874 875 /** 876 * e1000_hash_mc_addr - Determines address location in multicast table 877 * @hw: pointer to the HW structure 878 * @mc_addr: Multicast address to hash. 879 * 880 * This hashes an address to determine its location in the multicast 881 * table. Currently no func pointer exists and all implementations 882 * are handled in the generic version of this function. 883 **/ 884 u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr) 885 { 886 return e1000_hash_mc_addr_generic(hw, mc_addr); 887 } 888 889 /** 890 * e1000_enable_tx_pkt_filtering - Enable packet filtering on TX 891 * @hw: pointer to the HW structure 892 * 893 * Enables packet filtering on transmit packets if manageability is enabled 894 * and host interface is enabled. 895 * Currently no func pointer exists and all implementations are handled in the 896 * generic version of this function. 897 **/ 898 bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) 899 { 900 return e1000_enable_tx_pkt_filtering_generic(hw); 901 } 902 903 /** 904 * e1000_mng_host_if_write - Writes to the manageability host interface 905 * @hw: pointer to the HW structure 906 * @buffer: pointer to the host interface buffer 907 * @length: size of the buffer 908 * @offset: location in the buffer to write to 909 * @sum: sum of the data (not checksum) 910 * 911 * This function writes the buffer content at the offset given on the host if. 912 * It also does alignment considerations to do the writes in most efficient 913 * way. Also fills up the sum of the buffer in *buffer parameter. 914 **/ 915 s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, 916 u16 offset, u8 *sum) 917 { 918 return e1000_mng_host_if_write_generic(hw, buffer, length, offset, sum); 919 } 920 921 /** 922 * e1000_mng_write_cmd_header - Writes manageability command header 923 * @hw: pointer to the HW structure 924 * @hdr: pointer to the host interface command header 925 * 926 * Writes the command header after does the checksum calculation. 927 **/ 928 s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, 929 struct e1000_host_mng_command_header *hdr) 930 { 931 return e1000_mng_write_cmd_header_generic(hw, hdr); 932 } 933 934 /** 935 * e1000_mng_enable_host_if - Checks host interface is enabled 936 * @hw: pointer to the HW structure 937 * 938 * Returns E1000_success upon success, else E1000_ERR_HOST_INTERFACE_COMMAND 939 * 940 * This function checks whether the HOST IF is enabled for command operation 941 * and also checks whether the previous command is completed. It busy waits 942 * in case of previous command is not completed. 943 **/ 944 s32 e1000_mng_enable_host_if(struct e1000_hw *hw) 945 { 946 return e1000_mng_enable_host_if_generic(hw); 947 } 948 949 /** 950 * e1000_check_reset_block - Verifies PHY can be reset 951 * @hw: pointer to the HW structure 952 * 953 * Checks if the PHY is in a state that can be reset or if manageability 954 * has it tied up. This is a function pointer entry point called by drivers. 955 **/ 956 s32 e1000_check_reset_block(struct e1000_hw *hw) 957 { 958 if (hw->phy.ops.check_reset_block) 959 return hw->phy.ops.check_reset_block(hw); 960 961 return E1000_SUCCESS; 962 } 963 964 /** 965 * e1000_read_phy_reg - Reads PHY register 966 * @hw: pointer to the HW structure 967 * @offset: the register to read 968 * @data: the buffer to store the 16-bit read. 969 * 970 * Reads the PHY register and returns the value in data. 971 * This is a function pointer entry point called by drivers. 972 **/ 973 s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data) 974 { 975 if (hw->phy.ops.read_reg) 976 return hw->phy.ops.read_reg(hw, offset, data); 977 978 return E1000_SUCCESS; 979 } 980 981 /** 982 * e1000_write_phy_reg - Writes PHY register 983 * @hw: pointer to the HW structure 984 * @offset: the register to write 985 * @data: the value to write. 986 * 987 * Writes the PHY register at offset with the value in data. 988 * This is a function pointer entry point called by drivers. 989 **/ 990 s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data) 991 { 992 if (hw->phy.ops.write_reg) 993 return hw->phy.ops.write_reg(hw, offset, data); 994 995 return E1000_SUCCESS; 996 } 997 998 /** 999 * e1000_release_phy - Generic release PHY 1000 * @hw: pointer to the HW structure 1001 * 1002 * Return if silicon family does not require a semaphore when accessing the 1003 * PHY. 1004 **/ 1005 void e1000_release_phy(struct e1000_hw *hw) 1006 { 1007 if (hw->phy.ops.release) 1008 hw->phy.ops.release(hw); 1009 } 1010 1011 /** 1012 * e1000_acquire_phy - Generic acquire PHY 1013 * @hw: pointer to the HW structure 1014 * 1015 * Return success if silicon family does not require a semaphore when 1016 * accessing the PHY. 1017 **/ 1018 s32 e1000_acquire_phy(struct e1000_hw *hw) 1019 { 1020 if (hw->phy.ops.acquire) 1021 return hw->phy.ops.acquire(hw); 1022 1023 return E1000_SUCCESS; 1024 } 1025 1026 /** 1027 * e1000_cfg_on_link_up - Configure PHY upon link up 1028 * @hw: pointer to the HW structure 1029 **/ 1030 s32 e1000_cfg_on_link_up(struct e1000_hw *hw) 1031 { 1032 if (hw->phy.ops.cfg_on_link_up) 1033 return hw->phy.ops.cfg_on_link_up(hw); 1034 1035 return E1000_SUCCESS; 1036 } 1037 1038 /** 1039 * e1000_read_kmrn_reg - Reads register using Kumeran interface 1040 * @hw: pointer to the HW structure 1041 * @offset: the register to read 1042 * @data: the location to store the 16-bit value read. 1043 * 1044 * Reads a register out of the Kumeran interface. Currently no func pointer 1045 * exists and all implementations are handled in the generic version of 1046 * this function. 1047 **/ 1048 s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data) 1049 { 1050 return e1000_read_kmrn_reg_generic(hw, offset, data); 1051 } 1052 1053 /** 1054 * e1000_write_kmrn_reg - Writes register using Kumeran interface 1055 * @hw: pointer to the HW structure 1056 * @offset: the register to write 1057 * @data: the value to write. 1058 * 1059 * Writes a register to the Kumeran interface. Currently no func pointer 1060 * exists and all implementations are handled in the generic version of 1061 * this function. 1062 **/ 1063 s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data) 1064 { 1065 return e1000_write_kmrn_reg_generic(hw, offset, data); 1066 } 1067 1068 /** 1069 * e1000_get_cable_length - Retrieves cable length estimation 1070 * @hw: pointer to the HW structure 1071 * 1072 * This function estimates the cable length and stores them in 1073 * hw->phy.min_length and hw->phy.max_length. This is a function pointer 1074 * entry point called by drivers. 1075 **/ 1076 s32 e1000_get_cable_length(struct e1000_hw *hw) 1077 { 1078 if (hw->phy.ops.get_cable_length) 1079 return hw->phy.ops.get_cable_length(hw); 1080 1081 return E1000_SUCCESS; 1082 } 1083 1084 /** 1085 * e1000_get_phy_info - Retrieves PHY information from registers 1086 * @hw: pointer to the HW structure 1087 * 1088 * This function gets some information from various PHY registers and 1089 * populates hw->phy values with it. This is a function pointer entry 1090 * point called by drivers. 1091 **/ 1092 s32 e1000_get_phy_info(struct e1000_hw *hw) 1093 { 1094 if (hw->phy.ops.get_info) 1095 return hw->phy.ops.get_info(hw); 1096 1097 return E1000_SUCCESS; 1098 } 1099 1100 /** 1101 * e1000_phy_hw_reset - Hard PHY reset 1102 * @hw: pointer to the HW structure 1103 * 1104 * Performs a hard PHY reset. This is a function pointer entry point called 1105 * by drivers. 1106 **/ 1107 s32 e1000_phy_hw_reset(struct e1000_hw *hw) 1108 { 1109 if (hw->phy.ops.reset) 1110 return hw->phy.ops.reset(hw); 1111 1112 return E1000_SUCCESS; 1113 } 1114 1115 /** 1116 * e1000_phy_commit - Soft PHY reset 1117 * @hw: pointer to the HW structure 1118 * 1119 * Performs a soft PHY reset on those that apply. This is a function pointer 1120 * entry point called by drivers. 1121 **/ 1122 s32 e1000_phy_commit(struct e1000_hw *hw) 1123 { 1124 if (hw->phy.ops.commit) 1125 return hw->phy.ops.commit(hw); 1126 1127 return E1000_SUCCESS; 1128 } 1129 1130 /** 1131 * e1000_set_d0_lplu_state - Sets low power link up state for D0 1132 * @hw: pointer to the HW structure 1133 * @active: boolean used to enable/disable lplu 1134 * 1135 * Success returns 0, Failure returns 1 1136 * 1137 * The low power link up (lplu) state is set to the power management level D0 1138 * and SmartSpeed is disabled when active is true, else clear lplu for D0 1139 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1140 * is used during Dx states where the power conservation is most important. 1141 * During driver activity, SmartSpeed should be enabled so performance is 1142 * maintained. This is a function pointer entry point called by drivers. 1143 **/ 1144 s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active) 1145 { 1146 if (hw->phy.ops.set_d0_lplu_state) 1147 return hw->phy.ops.set_d0_lplu_state(hw, active); 1148 1149 return E1000_SUCCESS; 1150 } 1151 1152 /** 1153 * e1000_set_d3_lplu_state - Sets low power link up state for D3 1154 * @hw: pointer to the HW structure 1155 * @active: boolean used to enable/disable lplu 1156 * 1157 * Success returns 0, Failure returns 1 1158 * 1159 * The low power link up (lplu) state is set to the power management level D3 1160 * and SmartSpeed is disabled when active is true, else clear lplu for D3 1161 * and enable Smartspeed. LPLU and Smartspeed are mutually exclusive. LPLU 1162 * is used during Dx states where the power conservation is most important. 1163 * During driver activity, SmartSpeed should be enabled so performance is 1164 * maintained. This is a function pointer entry point called by drivers. 1165 **/ 1166 s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active) 1167 { 1168 if (hw->phy.ops.set_d3_lplu_state) 1169 return hw->phy.ops.set_d3_lplu_state(hw, active); 1170 1171 return E1000_SUCCESS; 1172 } 1173 1174 /** 1175 * e1000_read_mac_addr - Reads MAC address 1176 * @hw: pointer to the HW structure 1177 * 1178 * Reads the MAC address out of the adapter and stores it in the HW structure. 1179 * Currently no func pointer exists and all implementations are handled in the 1180 * generic version of this function. 1181 **/ 1182 s32 e1000_read_mac_addr(struct e1000_hw *hw) 1183 { 1184 if (hw->mac.ops.read_mac_addr) 1185 return hw->mac.ops.read_mac_addr(hw); 1186 1187 return e1000_read_mac_addr_generic(hw); 1188 } 1189 1190 /** 1191 * e1000_read_pba_string - Read device part number string 1192 * @hw: pointer to the HW structure 1193 * @pba_num: pointer to device part number 1194 * @pba_num_size: size of part number buffer 1195 * 1196 * Reads the product board assembly (PBA) number from the EEPROM and stores 1197 * the value in pba_num. 1198 * Currently no func pointer exists and all implementations are handled in the 1199 * generic version of this function. 1200 **/ 1201 s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size) 1202 { 1203 return e1000_read_pba_string_generic(hw, pba_num, pba_num_size); 1204 } 1205 1206 /** 1207 * e1000_read_pba_length - Read device part number string length 1208 * @hw: pointer to the HW structure 1209 * @pba_num_size: size of part number buffer 1210 * 1211 * Reads the product board assembly (PBA) number length from the EEPROM and 1212 * stores the value in pba_num. 1213 * Currently no func pointer exists and all implementations are handled in the 1214 * generic version of this function. 1215 **/ 1216 s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size) 1217 { 1218 return e1000_read_pba_length_generic(hw, pba_num_size); 1219 } 1220 1221 /** 1222 * e1000_read_pba_num - Read device part number 1223 * @hw: pointer to the HW structure 1224 * @pba_num: pointer to device part number 1225 * 1226 * Reads the product board assembly (PBA) number from the EEPROM and stores 1227 * the value in pba_num. 1228 * Currently no func pointer exists and all implementations are handled in the 1229 * generic version of this function. 1230 **/ 1231 s32 e1000_read_pba_num(struct e1000_hw *hw, u32 *pba_num) 1232 { 1233 return e1000_read_pba_num_generic(hw, pba_num); 1234 } 1235 1236 /** 1237 * e1000_validate_nvm_checksum - Verifies NVM (EEPROM) checksum 1238 * @hw: pointer to the HW structure 1239 * 1240 * Validates the NVM checksum is correct. This is a function pointer entry 1241 * point called by drivers. 1242 **/ 1243 s32 e1000_validate_nvm_checksum(struct e1000_hw *hw) 1244 { 1245 if (hw->nvm.ops.validate) 1246 return hw->nvm.ops.validate(hw); 1247 1248 return -E1000_ERR_CONFIG; 1249 } 1250 1251 /** 1252 * e1000_update_nvm_checksum - Updates NVM (EEPROM) checksum 1253 * @hw: pointer to the HW structure 1254 * 1255 * Updates the NVM checksum. Currently no func pointer exists and all 1256 * implementations are handled in the generic version of this function. 1257 **/ 1258 s32 e1000_update_nvm_checksum(struct e1000_hw *hw) 1259 { 1260 if (hw->nvm.ops.update) 1261 return hw->nvm.ops.update(hw); 1262 1263 return -E1000_ERR_CONFIG; 1264 } 1265 1266 /** 1267 * e1000_reload_nvm - Reloads EEPROM 1268 * @hw: pointer to the HW structure 1269 * 1270 * Reloads the EEPROM by setting the "Reinitialize from EEPROM" bit in the 1271 * extended control register. 1272 **/ 1273 void e1000_reload_nvm(struct e1000_hw *hw) 1274 { 1275 if (hw->nvm.ops.reload) 1276 hw->nvm.ops.reload(hw); 1277 } 1278 1279 /** 1280 * e1000_read_nvm - Reads NVM (EEPROM) 1281 * @hw: pointer to the HW structure 1282 * @offset: the word offset to read 1283 * @words: number of 16-bit words to read 1284 * @data: pointer to the properly sized buffer for the data. 1285 * 1286 * Reads 16-bit chunks of data from the NVM (EEPROM). This is a function 1287 * pointer entry point called by drivers. 1288 **/ 1289 s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1290 { 1291 if (hw->nvm.ops.read) 1292 return hw->nvm.ops.read(hw, offset, words, data); 1293 1294 return -E1000_ERR_CONFIG; 1295 } 1296 1297 /** 1298 * e1000_write_nvm - Writes to NVM (EEPROM) 1299 * @hw: pointer to the HW structure 1300 * @offset: the word offset to read 1301 * @words: number of 16-bit words to write 1302 * @data: pointer to the properly sized buffer for the data. 1303 * 1304 * Writes 16-bit chunks of data to the NVM (EEPROM). This is a function 1305 * pointer entry point called by drivers. 1306 **/ 1307 s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) 1308 { 1309 if (hw->nvm.ops.write) 1310 return hw->nvm.ops.write(hw, offset, words, data); 1311 1312 return E1000_SUCCESS; 1313 } 1314 1315 /** 1316 * e1000_write_8bit_ctrl_reg - Writes 8bit Control register 1317 * @hw: pointer to the HW structure 1318 * @reg: 32bit register offset 1319 * @offset: the register to write 1320 * @data: the value to write. 1321 * 1322 * Writes the PHY register at offset with the value in data. 1323 * This is a function pointer entry point called by drivers. 1324 **/ 1325 s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, 1326 u8 data) 1327 { 1328 return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); 1329 } 1330 1331 /** 1332 * e1000_power_up_phy - Restores link in case of PHY power down 1333 * @hw: pointer to the HW structure 1334 * 1335 * The phy may be powered down to save power, to turn off link when the 1336 * driver is unloaded, or wake on lan is not enabled (among others). 1337 **/ 1338 void e1000_power_up_phy(struct e1000_hw *hw) 1339 { 1340 if (hw->phy.ops.power_up) 1341 hw->phy.ops.power_up(hw); 1342 1343 e1000_setup_link(hw); 1344 } 1345 1346 /** 1347 * e1000_power_down_phy - Power down PHY 1348 * @hw: pointer to the HW structure 1349 * 1350 * The phy may be powered down to save power, to turn off link when the 1351 * driver is unloaded, or wake on lan is not enabled (among others). 1352 **/ 1353 void e1000_power_down_phy(struct e1000_hw *hw) 1354 { 1355 if (hw->phy.ops.power_down) 1356 hw->phy.ops.power_down(hw); 1357 } 1358 1359 /** 1360 * e1000_power_up_fiber_serdes_link - Power up serdes link 1361 * @hw: pointer to the HW structure 1362 * 1363 * Power on the optics and PCS. 1364 **/ 1365 void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw) 1366 { 1367 if (hw->mac.ops.power_up_serdes) 1368 hw->mac.ops.power_up_serdes(hw); 1369 } 1370 1371 /** 1372 * e1000_shutdown_fiber_serdes_link - Remove link during power down 1373 * @hw: pointer to the HW structure 1374 * 1375 * Shutdown the optics and PCS on driver unload. 1376 **/ 1377 void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw) 1378 { 1379 if (hw->mac.ops.shutdown_serdes) 1380 hw->mac.ops.shutdown_serdes(hw); 1381 } 1382 1383