1 /*-
2 * Copyright (c) 2014 Ruslan Bukin <[email protected]>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 */
26
27 /*
28 * Vybrid Family 12-bit Analog to Digital Converter (ADC)
29 * Chapter 37, Vybrid Reference Manual, Rev. 5, 07/2013
30 */
31
32 #include <sys/cdefs.h>
33 #include <sys/param.h>
34 #include <sys/systm.h>
35 #include <sys/bus.h>
36 #include <sys/kernel.h>
37 #include <sys/module.h>
38 #include <sys/malloc.h>
39 #include <sys/rman.h>
40 #include <sys/timeet.h>
41 #include <sys/timetc.h>
42
43 #include <dev/ofw/openfirm.h>
44 #include <dev/ofw/ofw_bus.h>
45 #include <dev/ofw/ofw_bus_subr.h>
46
47 #include <machine/bus.h>
48 #include <machine/cpu.h>
49 #include <machine/intr.h>
50
51 #include <arm/freescale/vybrid/vf_common.h>
52 #include <arm/freescale/vybrid/vf_adc.h>
53
54 #define ADC_HC0 0x00 /* Ctrl reg for hardware triggers */
55 #define ADC_HC1 0x04 /* Ctrl reg for hardware triggers */
56 #define HC_AIEN (1 << 7) /* Conversion Complete Int Control */
57 #define HC_ADCH_M 0x1f /* Input Channel Select Mask */
58 #define HC_ADCH_S 0 /* Input Channel Select Shift */
59 #define ADC_HS 0x08 /* Status register for HW triggers */
60 #define HS_COCO0 (1 << 0) /* Conversion Complete Flag */
61 #define HS_COCO1 (1 << 1) /* Conversion Complete Flag */
62 #define ADC_R0 0x0C /* Data result reg for HW triggers */
63 #define ADC_R1 0x10 /* Data result reg for HW triggers */
64 #define ADC_CFG 0x14 /* Configuration register */
65 #define CFG_OVWREN (1 << 16) /* Data Overwrite Enable */
66 #define CFG_AVGS_M 0x3 /* Hardware Average select Mask */
67 #define CFG_AVGS_S 14 /* Hardware Average select Shift */
68 #define CFG_ADTRG (1 << 13) /* Conversion Trigger Select */
69 #define CFG_REFSEL_M 0x3 /* Voltage Reference Select Mask */
70 #define CFG_REFSEL_S 11 /* Voltage Reference Select Shift */
71 #define CFG_ADHSC (1 << 10) /* High Speed Configuration */
72 #define CFG_ADSTS_M 0x3 /* Defines the sample time duration */
73 #define CFG_ADSTS_S 8 /* Defines the sample time duration */
74 #define CFG_ADLPC (1 << 7) /* Low-Power Configuration */
75 #define CFG_ADIV_M 0x3 /* Clock Divide Select */
76 #define CFG_ADIV_S 5 /* Clock Divide Select */
77 #define CFG_ADLSMP (1 << 4) /* Long Sample Time Configuration */
78 #define CFG_MODE_M 0x3 /* Conversion Mode Selection Mask */
79 #define CFG_MODE_S 2 /* Conversion Mode Selection Shift */
80 #define CFG_MODE_12 0x2 /* 12-bit mode */
81 #define CFG_ADICLK_M 0x3 /* Input Clock Select Mask */
82 #define CFG_ADICLK_S 0 /* Input Clock Select Shift */
83 #define ADC_GC 0x18 /* General control register */
84 #define GC_CAL (1 << 7) /* Calibration */
85 #define GC_ADCO (1 << 6) /* Continuous Conversion Enable */
86 #define GC_AVGE (1 << 5) /* Hardware average enable */
87 #define GC_ACFE (1 << 4) /* Compare Function Enable */
88 #define GC_ACFGT (1 << 3) /* Compare Function Greater Than En */
89 #define GC_ACREN (1 << 2) /* Compare Function Range En */
90 #define GC_DMAEN (1 << 1) /* DMA Enable */
91 #define GC_ADACKEN (1 << 0) /* Asynchronous clock output enable */
92 #define ADC_GS 0x1C /* General status register */
93 #define GS_AWKST (1 << 2) /* Asynchronous wakeup int status */
94 #define GS_CALF (1 << 1) /* Calibration Failed Flag */
95 #define GS_ADACT (1 << 0) /* Conversion Active */
96 #define ADC_CV 0x20 /* Compare value register */
97 #define CV_CV2_M 0xfff /* Compare Value 2 Mask */
98 #define CV_CV2_S 16 /* Compare Value 2 Shift */
99 #define CV_CV1_M 0xfff /* Compare Value 1 Mask */
100 #define CV_CV1_S 0 /* Compare Value 1 Shift */
101 #define ADC_OFS 0x24 /* Offset correction value register */
102 #define OFS_SIGN 12 /* Sign bit */
103 #define OFS_M 0xfff /* Offset value Mask */
104 #define OFS_S 0 /* Offset value Shift */
105 #define ADC_CAL 0x28 /* Calibration value register */
106 #define CAL_CODE_M 0xf /* Calibration Result Value Mask */
107 #define CAL_CODE_S 0 /* Calibration Result Value Shift */
108 #define ADC_PCTL 0x30 /* Pin control register */
109
110 struct adc_softc {
111 struct resource *res[2];
112 bus_space_tag_t bst;
113 bus_space_handle_t bsh;
114 void *ih;
115 };
116
117 struct adc_softc *adc_sc;
118
119 static struct resource_spec adc_spec[] = {
120 { SYS_RES_MEMORY, 0, RF_ACTIVE },
121 { SYS_RES_IRQ, 0, RF_ACTIVE },
122 { -1, 0 }
123 };
124
125 static int
adc_probe(device_t dev)126 adc_probe(device_t dev)
127 {
128
129 if (!ofw_bus_status_okay(dev))
130 return (ENXIO);
131
132 if (!ofw_bus_is_compatible(dev, "fsl,mvf600-adc"))
133 return (ENXIO);
134
135 device_set_desc(dev, "Vybrid Family "
136 "12-bit Analog to Digital Converter");
137 return (BUS_PROBE_DEFAULT);
138 }
139
140 static void
adc_intr(void * arg)141 adc_intr(void *arg)
142 {
143
144 /* Conversation complete */
145 }
146
147 uint32_t
adc_read(void)148 adc_read(void)
149 {
150 struct adc_softc *sc;
151
152 sc = adc_sc;
153 if (sc == NULL)
154 return (0);
155
156 return (READ4(sc, ADC_R0));
157 }
158
159 uint32_t
adc_enable(int channel)160 adc_enable(int channel)
161 {
162 struct adc_softc *sc;
163 int reg;
164
165 sc = adc_sc;
166 if (sc == NULL)
167 return (1);
168
169 reg = READ4(sc, ADC_HC0);
170 reg &= ~(HC_ADCH_M << HC_ADCH_S);
171 reg |= (channel << HC_ADCH_S);
172 WRITE4(sc, ADC_HC0, reg);
173
174 return (0);
175 }
176
177 static int
adc_attach(device_t dev)178 adc_attach(device_t dev)
179 {
180 struct adc_softc *sc;
181 int err;
182 int reg;
183
184 sc = device_get_softc(dev);
185
186 if (bus_alloc_resources(dev, adc_spec, sc->res)) {
187 device_printf(dev, "could not allocate resources\n");
188 return (ENXIO);
189 }
190
191 /* Memory interface */
192 sc->bst = rman_get_bustag(sc->res[0]);
193 sc->bsh = rman_get_bushandle(sc->res[0]);
194
195 adc_sc = sc;
196
197 /* Setup interrupt handler */
198 err = bus_setup_intr(dev, sc->res[1], INTR_TYPE_BIO | INTR_MPSAFE,
199 NULL, adc_intr, sc, &sc->ih);
200 if (err) {
201 device_printf(dev, "Unable to alloc interrupt resource.\n");
202 return (ENXIO);
203 }
204
205 /* Configure 12-bit mode */
206 reg = READ4(sc, ADC_CFG);
207 reg &= ~(CFG_MODE_M << CFG_MODE_S);
208 reg |= (CFG_MODE_12 << CFG_MODE_S); /* 12bit */
209 WRITE4(sc, ADC_CFG, reg);
210
211 /* Configure for continuous conversion */
212 reg = READ4(sc, ADC_GC);
213 reg |= (GC_ADCO | GC_AVGE);
214 WRITE4(sc, ADC_GC, reg);
215
216 /* Disable interrupts */
217 reg = READ4(sc, ADC_HC0);
218 reg &= HC_AIEN;
219 WRITE4(sc, ADC_HC0, reg);
220
221 return (0);
222 }
223
224 static device_method_t adc_methods[] = {
225 DEVMETHOD(device_probe, adc_probe),
226 DEVMETHOD(device_attach, adc_attach),
227 { 0, 0 }
228 };
229
230 static driver_t adc_driver = {
231 "adc",
232 adc_methods,
233 sizeof(struct adc_softc),
234 };
235
236 DRIVER_MODULE(adc, simplebus, adc_driver, 0, 0);
237