| /linux-6.15/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx6qdl-sr-som.dtsi | 118 /* AR8035 pin strapping: IO voltage: pull up */ 120 /* AR8035 pin strapping: PHYADDR#0: pull down */ 122 /* AR8035 pin strapping: PHYADDR#1: pull down */ 124 /* AR8035 pin strapping: MODE#1: pull up */ 126 /* AR8035 pin strapping: MODE#3: pull up */ 128 /* AR8035 pin strapping: MODE#0: pull down */
|
| H A D | imx6q-marsboard.dts | 277 /* AR8035 pin strapping: IO voltage: pull up */ 279 /* AR8035 pin strapping: PHYADDR#0: pull down */ 281 /* AR8035 pin strapping: PHYADDR#1: pull down */ 283 /* AR8035 pin strapping: MODE#1: pull up */ 285 /* AR8035 pin strapping: MODE#3: pull up */ 287 /* AR8035 pin strapping: MODE#0: pull down */
|
| H A D | imx6dl-riotboard.dts | 444 MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 /* AR8035 pin strapping: IO voltage: pull up */ 445 MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 /* AR8035 pin strapping: PHYADDR#0: pull down */ 446 MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 /* AR8035 pin strapping: PHYADDR#1: pull down */ 447 MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 /* AR8035 pin strapping: MODE#1: pull up */ 448 MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 /* AR8035 pin strapping: MODE#3: pull up */ 449 MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */
|
| H A D | imx6q-pistachio.dts | 384 /* AR8035 pin strapping: IO voltage: pull up */ 386 /* AR8035 pin strapping: PHYADDR#0: pull down */ 388 /* AR8035 pin strapping: PHYADDR#1: pull down */ 390 /* AR8035 pin strapping: MODE#1: pull up */ 392 /* AR8035 pin strapping: MODE#3: pull up */ 394 /* AR8035 pin strapping: MODE#0: pull down */
|
| /linux-6.15/drivers/soc/tegra/fuse/ |
| H A D | tegra-apbmisc.c | 32 static u32 strapping; variable 88 return strapping; in tegra_read_straps() 179 strapping = readl_relaxed(strapping_base); in tegra_init_apbmisc_resources()
|
| /linux-6.15/Documentation/devicetree/bindings/misc/ |
| H A D | nvidia,tegra186-misc.yaml | 14 registers that can be used to identify a given chip and various strapping 29 indicate strapping options
|
| H A D | nvidia,tegra20-apbmisc.yaml | 32 indicate strapping options
|
| /linux-6.15/Documentation/devicetree/bindings/sound/ |
| H A D | wm8741.txt | 3 This device supports both I2C and SPI (configured with pin strapping
|
| H A D | cs4341.txt | 3 This device supports both I2C and SPI (configured with pin strapping
|
| H A D | wlf,wm8750.yaml | 10 These devices support both I2C and SPI (configured with pin strapping
|
| H A D | pcm186x.txt | 3 These devices support both I2C and SPI (configured with pin strapping
|
| H A D | wlf,wm8804.yaml | 10 This device supports both I2C and SPI (configured with pin strapping on the
|
| H A D | wlf,wm8994.yaml | 14 These devices support both I2C and SPI (configured with pin strapping on the
|
| /linux-6.15/Documentation/iio/ |
| H A D | ad7191.rst | 32 The ODR can be configured either through GPIO control or pin-strapping: 48 The PGA can be configured either through GPIO control or pin-strapping:
|
| /linux-6.15/Documentation/devicetree/bindings/net/dsa/ |
| H A D | qca8k.yaml | 49 Ignore power-on pin strapping to configure LED open-drain or EEPROM 51 the OEM has decided not to use pin strapping and falls back to SW regs. 58 OEM does not use pin strapping to set this mode and prefers to set it
|
| /linux-6.15/Documentation/devicetree/bindings/net/ |
| H A D | ti,dp83867.yaml | 94 strapping. The default strapping will use a delay of 2.00 ns. Thus
|
| H A D | micrel.txt | 43 by the FXEN boot strapping pin. It can't be determined from the PHY
|
| H A D | qca,qca7000.txt | 30 the QCA7000 is setup via GPIO pin strapping. If the
|
| H A D | ethernet-phy.yaml | 171 device tree due to limitations in hardware strapping or incorrect strap
|
| H A D | ethernet-controller.yaml | 338 # strapping or the bootloader, etc.
|
| /linux-6.15/Documentation/devicetree/bindings/phy/ |
| H A D | phy-cadence-sierra.yaml | 77 by hardware strapping, and must match the configuration specified here.
|
| /linux-6.15/Documentation/ABI/testing/ |
| H A D | sysfs-class-watchdog | 104 h/w strapping (for WDT2 only).
|
| /linux-6.15/arch/arm/boot/dts/aspeed/ |
| H A D | aspeed-bmc-ibm-bonnell.dts | 58 /* VGA region is dictated by hardware strapping */
|
| H A D | aspeed-bmc-ibm-system1.dts | 108 /* VGA region is dictated by hardware strapping */
|
| /linux-6.15/Documentation/admin-guide/pm/ |
| H A D | sleep-states.rst | 93 On ACPI-based systems S2RAM requires some minimal boot-strapping code in the
|