| /linux-6.15/Documentation/devicetree/bindings/phy/ |
| H A D | realtek,usb2phy.yaml | 113 realtek,driving-level-compensate: 124 realtek,disconnection-compensate: 159 realtek,driving-level-compensate: false 174 realtek,disconnection-compensate = <(-1)>;
|
| H A D | phy-miphy28lp.txt | 44 - st,tx-impedance-comp : to compensate tx impedance avoiding out of range values.
|
| H A D | qcom,usb-snps-femto-v2.yaml | 136 the driver source impedance to compensate for added series
|
| H A D | phy-stm32-usbphyc.yaml | 89 # It can be necessary to adjust the PHY settings to compensate parasitics, which can be due
|
| /linux-6.15/Documentation/devicetree/bindings/sound/ |
| H A D | rt5663.txt | 24 compensate the DC offset for each L and R channel, and they are different 38 should compensate different DC offset to avoid the pop sound, and it is
|
| /linux-6.15/Documentation/userspace-api/media/dvb/ |
| H A D | fe-enable-high-lnb-voltage.rst | 34 to compensate for long antenna cables.
|
| /linux-6.15/Documentation/devicetree/bindings/power/supply/ |
| H A D | stericsson,ab8500-fg.yaml | 30 AB8500 inputs, to compensate for this when determining internal
|
| H A D | maxim,max17040.yaml | 51 A value to compensate readings for various battery chemistries and operating temperatures.
|
| /linux-6.15/Documentation/devicetree/bindings/media/ |
| H A D | video-interface-devices.yaml | 230 The camera is typically mounted upside-down to compensate the lens optical 264 If the camera sensor is not mounted upside-down to compensate for the lens 322 aligned to the device longer side, upside-down mounted to compensate for
|
| /linux-6.15/Documentation/userspace-api/media/v4l/ |
| H A D | ext-ctrls-camera.rst | 296 - With this setting the camera will compensate for fluorescent H 305 - With this setting the camera will compensate for the flash light. 405 compensate, this mode automatically slightly overexposes the 406 frames. The white balance may also be adjusted to compensate for 546 captured to memory to compensate for the camera sensor mounting rotation. 577 The camera is typically mounted upside-down to compensate the lens optical 582 If the camera sensor is not mounted upside-down it is required to compensate 623 aligned to the device longer side, upside-down mounted to compensate for
|
| /linux-6.15/Documentation/devicetree/bindings/leds/ |
| H A D | nxp,pca963x.yaml | 56 to compensate, e.g. 1300=1.3x and 750=0.75x.
|
| /linux-6.15/Documentation/devicetree/bindings/clock/ |
| H A D | ti,cdce925.yaml | 51 board, or to compensate for external influences.
|
| /linux-6.15/Documentation/devicetree/bindings/clock/ti/ |
| H A D | dra7-atl.txt | 7 signals - can compensate the drift between the two ws signal.
|
| /linux-6.15/Documentation/devicetree/bindings/mfd/ |
| H A D | gateworks-gsc.yaml | 101 (i.e. to compensate for a diode drop).
|
| /linux-6.15/arch/m68k/fpsp040/ |
| H A D | decbin.S | 25 | Set the sign according to SE. Subtract 16 to compensate 127 | 4. Subtract 16 to compensate for interpreting the mant as all integer digits.
|
| /linux-6.15/arch/xtensa/lib/ |
| H A D | strnlen_user.S | 51 # we compensate with load offsets of 4
|
| /linux-6.15/Documentation/ABI/testing/ |
| H A D | sysfs-devices-platform-trackpoint | 111 IBM Trackpoints have a feature to compensate for drift by
|
| H A D | sysfs-class-thermal | 131 controller. This term allows the PID controller to compensate
|
| /linux-6.15/arch/sh/ |
| H A D | Kconfig.debug | 44 will also use IRQ stacks to compensate for the reduced stackspace.
|
| /linux-6.15/arch/arm/boot/dts/allwinner/ |
| H A D | sun8i-v3s-anbernic-rg-nano.dts | 243 /* Set hb-porch to compensate for non-visible area */
|
| /linux-6.15/drivers/leds/flash/ |
| H A D | Kconfig | 103 And it's commonly used to compensate the illuminance for the camera
|
| /linux-6.15/Documentation/hwmon/ |
| H A D | k10temp.rst | 129 compensate and report the real temperature.
|
| H A D | lm85.rst | 130 Both have special circuitry to compensate for PWM interactions with the 278 the temperatures to compensate for systemic errors in the
|
| H A D | pc87360.rst | 154 internally, you will have to compensate in sensors.conf. Others (in0 to in6)
|
| /linux-6.15/block/ |
| H A D | bfq-iosched.h | 1055 bool compensate, enum bfqq_expiration reason);
|