| /freebsd-14.2/sys/contrib/device-tree/Bindings/thermal/ |
| H A D | thermal-cooling-devices.yaml | 5 $id: http://devicetree.org/schemas/thermal/thermal-cooling-devices.yaml# 8 title: Thermal cooling device 25 This binding describes the cooling devices. 30 scaling (DVFS), and uses lower frequencies as cooling states. 34 Any cooling device has a range of cooling states (i.e. different levels of 45 "#cooling-cells": 48 the cooling-maps reference. The first cell is the minimum cooling state 49 and the second cell is the maximum cooling state requested. 59 // Example 1: Cpufreq cooling device on CPU0 75 #cooling-cells = <2>; [all …]
|
| H A D | thermal-idle.yaml | 8 title: Thermal idle cooling device 14 The thermal idle cooling device allows the system to passively 27 '#cooling-cells': 31 the cooling-maps reference. The first cell is the minimum cooling state 32 and the second cell is the maximum cooling state requested. 45 - '#cooling-cells' 59 // Example: Combining idle cooling device on big CPUs with cpufreq cooling device 73 #cooling-cells = <2>; /* min followed by max */ 76 #cooling-cells = <2>; 92 #cooling-cells = <2>; [all …]
|
| H A D | thermal.txt | 46 cooling. A typical passive cooling is a CPU that has dynamic voltage and 53 Any cooling device has a range of cooling states (i.e. different levels 62 - #cooling-cells: Used to provide cooling device specific information 272 cooling-maps { 342 cooling-maps { 369 cooling-maps { 396 cooling-maps { 416 and cooling maps. 463 cooling-maps { 518 cooling-maps { [all …]
|
| H A D | zx2967-thermal.txt | 26 Example for cooling device: 29 cluster0_cooling_dev: cluster0-cooling-dev { 30 #cooling-cells = <2>; 35 cluster1_cooling_dev: cluster1-cooling-dev { 36 #cooling-cells = <2>; 76 cooling-maps { 79 cooling-device = <&gpu 2 5>; 84 cooling-device = <&cluster0_cooling_dev 1 2>; 89 cooling-device = <&cluster0_cooling_dev 1 2>; 94 cooling-device = <&cluster0_cooling_dev 1 2>; [all …]
|
| H A D | thermal-zones.yaml | 29 1. when passive cooling is activated (polling-delay-passive) 31 active cooling is activated. 135 cooling action is removed. 140 - active # enable active cooling e.g. fans 172 cooling-maps: 179 trip and the target cooling device state. 191 cooling-device: 195 and maximum cooling state specifiers for each cooling 198 use the minimum and maximum cooling state for that cooling 211 - cooling-device [all …]
|
| H A D | nvidia,tegra124-soctherm.txt | 65 - #cooling-cells: Should be 1. This cooling device only support on/off state. 123 * When the "heavy" cooling device triggered, 132 #cooling-cells = <1>; 136 * When the "light" cooling device triggered, 145 #cooling-cells = <1>; 177 * When the "heavy" cooling device triggered, 184 #cooling-cells = <1>; 188 * When the "light" cooling device triggered, 195 #cooling-cells = <1>; 231 cooling-maps { [all …]
|
| H A D | max77620_thermal.txt | 37 compatible = "cooling-dev"; 38 #cooling-cells = <2>; 61 cooling-maps { 64 cooling-device = <&cool_dev THERMAL_NO_LIMIT
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm/ |
| H A D | exynos5422-odroidxu3-common.dtsi | 51 #cooling-cells = <2>; 52 cooling-levels = <0 130 170 230>; 98 cooling-maps { 101 cooling-device = <&fan0 0 1>; 105 cooling-device = <&fan0 1 2>; 109 cooling-device = <&fan0 2 3>; 118 cooling-device = <&cpu0 0 2>, 181 cooling-maps { 254 cooling-maps { 327 cooling-maps { [all …]
|
| H A D | exynos5422-odroidhc1.dts | 53 cooling-maps { 61 cooling-device = <&cpu0 0 2>, 77 cooling-device = <&cpu0 3 8>, 107 cooling-maps { 110 cooling-device = <&cpu0 0 2>, 121 cooling-device = <&cpu0 3 8>, 151 cooling-maps { 195 cooling-maps { 239 cooling-maps { 242 cooling-device = <&gpu 0 2>; [all …]
|
| H A D | rk3288-veyron-mickey.dts | 43 /delete-node/ cooling-maps; 83 cooling-maps { 90 cooling-device = <&cpu0 THERMAL_NO_LIMIT 4>, 97 cooling-device = <&gpu 1 1>; 142 cooling-device = <&gpu 2 2>; 149 /delete-node/ cooling-maps; 179 cooling-maps { 183 cooling-device = <&gpu THERMAL_NO_LIMIT 1>; 194 cooling-device = <&cpu0 4 4>, 203 cooling-device = <&gpu 2 2>; [all …]
|
| H A D | exynos5420-cpus.dtsi | 65 #cooling-cells = <2>; /* min followed by max */ 77 #cooling-cells = <2>; /* min followed by max */ 89 #cooling-cells = <2>; /* min followed by max */ 101 #cooling-cells = <2>; /* min followed by max */ 113 #cooling-cells = <2>; /* min followed by max */ 125 #cooling-cells = <2>; /* min followed by max */ 137 #cooling-cells = <2>; /* min followed by max */ 149 #cooling-cells = <2>; /* min followed by max */
|
| H A D | exynos5422-cpus.dtsi | 64 #cooling-cells = <2>; /* min followed by max */ 77 #cooling-cells = <2>; /* min followed by max */ 90 #cooling-cells = <2>; /* min followed by max */ 103 #cooling-cells = <2>; /* min followed by max */ 116 #cooling-cells = <2>; /* min followed by max */ 129 #cooling-cells = <2>; /* min followed by max */ 142 #cooling-cells = <2>; /* min followed by max */ 155 #cooling-cells = <2>; /* min followed by max */
|
| H A D | exynos4412-odroidu3.dts | 52 #cooling-cells = <2>; 53 cooling-levels = <0 102 170 230>; 70 cooling-maps { 73 cooling-device = <&cpu0 9 9>, <&cpu1 9 9>, 79 cooling-device = <&cpu0 15 15>, <&cpu1 15 15>, 85 cooling-device = <&fan0 0 1>;
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm64/exynos/ |
| H A D | exynos5433-tmu.dtsi | 54 cooling-maps { 58 cooling-device = <&cpu4 1 2>, <&cpu5 1 2>, 64 cooling-device = <&cpu4 2 3>, <&cpu5 2 3>, 70 cooling-device = <&cpu4 3 4>, <&cpu5 3 4>, 76 cooling-device = <&cpu4 4 5>, <&cpu5 4 5>, 82 cooling-device = <&cpu4 5 7>, <&cpu5 5 7>, 88 cooling-device = <&cpu4 7 9>, <&cpu5 7 9>, 94 cooling-device = <&cpu4 9 14>, <&cpu5 9 14>, 228 cooling-maps { 232 cooling-device = <&cpu0 1 2>, <&cpu1 1 2>, [all …]
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm64/amlogic/ |
| H A D | meson-g12b.dtsi | 53 #cooling-cells = <2>; 63 #cooling-cells = <2>; 73 #cooling-cells = <2>; 83 #cooling-cells = <2>; 93 #cooling-cells = <2>; 103 #cooling-cells = <2>; 118 cooling-maps { 121 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 130 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
| H A D | meson-g12a.dtsi | 21 #cooling-cells = <2>; 30 #cooling-cells = <2>; 39 #cooling-cells = <2>; 48 #cooling-cells = <2>; 99 cooling-maps { 102 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, 110 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
|
| H A D | meson-sm1-odroid-hc4.dts | 21 #cooling-cells = <2>; 22 cooling-min-state = <0>; 23 cooling-max-state = <3>; 24 cooling-levels = <0 120 170 220>; 87 cooling-maps { 90 cooling-device = <&fan0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
|
| /freebsd-14.2/sys/contrib/device-tree/Bindings/hwmon/ |
| H A D | pwm-fan.yaml | 17 cooling-levels: 18 description: PWM duty cycle values corresponding to thermal cooling states. 47 "#cooling-cells": true 59 cooling-levels = <0 102 170 230>; 61 #cooling-cells = <2>; 78 cooling-maps { 81 cooling-device = <&fan0 0 1>;
|
| H A D | aspeed-pwm-tacho.txt | 14 - #cooling-cells: should be 2. 34 For PWM port can be configured cooling-levels to create cooling device. 42 - cooling-levels: PWM duty cycle values in a range from 0 to 255 43 which correspond to thermal cooling states. 55 #cooling-cells = <2>; 65 cooling-levels = /bits/ 8 <125 151 177 203 229 255>;
|
| H A D | gpio-fan.txt | 14 - #cooling-cells: If used as a cooling device, must be <2> 16 Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml 40 #cooling-cells = <2>; /* min followed by max */
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm64/marvell/ |
| H A D | armada-8040-clearfog-gt-8k.dts | 38 #cooling-cells = <2>; 124 cooling-maps { 131 cooling-device = <&fan 4 5>; 160 cooling-maps { 163 cooling-device = <&fan 0 1>; 167 cooling-device = <&fan 1 2>; 171 cooling-device = <&fan 2 3>; 175 cooling-device = <&fan 3 4>; 179 cooling-device = <&fan 4 5>; 208 cooling-maps { [all …]
|
| H A D | armada-ap80x.dtsi | 334 cooling-maps { }; 356 cooling-maps { 359 cooling-device = <&cpu0 1 2>, 364 cooling-device = <&cpu0 3 3>, 389 cooling-maps { 392 cooling-device = <&cpu0 1 2>, 397 cooling-device = <&cpu0 3 3>, 422 cooling-maps { 425 cooling-device = <&cpu2 1 2>, 430 cooling-device = <&cpu2 3 3>, [all …]
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm64/freescale/ |
| H A D | fsl-ls2080a.dtsi | 23 #cooling-cells = <2>; 33 #cooling-cells = <2>; 43 #cooling-cells = <2>; 53 #cooling-cells = <2>; 63 #cooling-cells = <2>; 73 #cooling-cells = <2>; 83 #cooling-cells = <2>; 93 #cooling-cells = <2>;
|
| H A D | fsl-ls2088a.dtsi | 23 #cooling-cells = <2>; 33 #cooling-cells = <2>; 43 #cooling-cells = <2>; 53 #cooling-cells = <2>; 63 #cooling-cells = <2>; 73 #cooling-cells = <2>; 83 #cooling-cells = <2>; 93 #cooling-cells = <2>;
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm64/rockchip/ |
| H A D | rk3399-nanopc-t4.dts | 62 cooling-levels = <0 12 18 255>; 63 #cooling-cells = <2>; 84 cooling-maps { 87 cooling-device = <&fan THERMAL_NO_LIMIT 1>; 92 cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
|