| /freebsd-14.2/sys/contrib/device-tree/Bindings/regulator/ |
| H A D | mps,mpq7920.yaml | 48 "^buck[1-4]$": 53 mps,buck-softstart: 57 defines the soft start time of this buck, must be one of the following 60 mps,buck-phase-delay: 64 defines the phase delay of this buck, must be one of the following 67 mps,buck-ovp-disable: 70 disables over voltage protection of this buck 103 mps,buck-ovp-disable; 104 mps,buck-phase-delay = /bits/ 8 <2>; 105 mps,buck-softstart = /bits/ 8 <1>;
|
| H A D | mediatek,mt6332-regulator.yaml | 15 buck-<name> and ldo-<name>. 19 "^buck-v(dram|dvfs2|pa|rf18a|rf18b|sbst)$": 45 mt6332_vdram_reg: buck-vdram { 53 mt6332_vdvfs2_reg: buck-vdvfs2 { 61 mt6332_vpa_reg: buck-vpa { 66 mt6332_vrf18a_reg: buck-vrf18a { 72 mt6332_vrf18b_reg: buck-vrf18b { 78 mt6332_vsbst_reg: buck-vsbst {
|
| H A D | mt6380-regulator.txt | 5 to its regulator type, buck-<name> and ldo-<name>. The definition for each 11 buck-core1, buck-vcore, buck-vrf 20 mt6380_vcpu_reg: buck-vcore1 { 29 mt6380_vcore_reg: buck-vcore { 36 mt6380_vrf_reg: buck-vrf {
|
| H A D | dlg,da9121.yaml | 13 Dialog Semiconductor DA9121 Single-channel 10A double-phase buck converter 14 Dialog Semiconductor DA9122 Double-channel 5A single-phase buck converter 15 Dialog Semiconductor DA9220 Double-channel 3A single-phase buck converter 16 Dialog Semiconductor DA9217 Single-channel 6A double-phase buck converter 17 Dialog Semiconductor DA9130 Single-channel 10A double-phase buck converter 18 Dialog Semiconductor DA9131 Double-channel 5A single-phase buck converter 19 Dialog Semiconductor DA9132 Double-channel 3A single-phase buck converter 20 Dialog Semiconductor DA9141 Single-channel 40A quad-phase buck converter 21 Dialog Semiconductor DA9142 Single-channel 20A double-phase buck converter 91 "^buck([1-2])$":
|
| H A D | samsung,s5m8767.txt | 7 The S5M8767 device provide buck and LDO regulators. 28 - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used 31 [1] If none of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional 32 property is specified, the 's5m8767,pmic-buck[2/3/4]-dvs-voltage' 36 If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional 38 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified. 52 - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used 89 s5m8767,pmic-buck-default-dvs-idx = <0>; 91 s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */ 95 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
|
| H A D | samsung,s2mpa01.txt | 7 The S2MPA01 device provide buck and LDO regulators. 26 Optional properties of buck regulator nodes under "regulators" sub-node: 38 - buck{1,6}, 39 - buck{2,4}, 40 - buck{8,9,10}.
|
| H A D | richtek,rt5739.yaml | 13 The RT5739 is a step-down switching buck converter that can deliver the 34 If property is present, use the 'VSEL1' register group for buck control. 41 buck allowed operating mode 66 regulator-name = "richtek,rt5739-buck";
|
| H A D | samsung,s2mpa01.yaml | 16 The S2MPA01 provides buck and LDO regulators. 55 * buck{1,6}, 56 * buck{2,4}, 57 * buck{8,9,10}.
|
| H A D | mediatek,mt6331-regulator.yaml | 15 buck-<name> and ldo-<name>. 19 "^buck-v(core2|io18|dvfs11|dvfs12|dvfs13|dvfs14)$": 91 mt6331_vdvfs11_reg: buck-vdvfs11 { 99 mt6331_vdvfs12_reg: buck-vdvfs12 { 107 mt6331_vdvfs13_reg: buck-vdvfs13 { 115 mt6331_vdvfs14_reg: buck-vdvfs14 { 123 mt6331_vcore2_reg: buck-vcore2 { 131 mt6331_vio18_reg: buck-vio18 {
|
| H A D | samsung,s2mps11.txt | 7 The S2MPS11/13/14/15 and S2MPU02 devices provide buck and LDO regulators. 47 - buck{1,6}, 48 - buck{3,4}, 49 - buck{7,8,10}.
|
| H A D | richtek,rt5759-regulator.yaml | 31 buck allowed operating mode 69 regulator-name = "rt5759-buck"; 84 regulator-name = "rt5759a-buck";
|
| H A D | mediatek,mt6357-regulator.yaml | 17 - buck-<name> 22 "^buck-v(core|modem|pa|proc|s1)$": 76 mt6357_vproc_reg: buck-vproc { 84 mt6357_vcore_reg: buck-vcore { 92 mt6357_vmodem_reg: buck-vmodem { 99 mt6357_vs1_reg: buck-vs1 { 107 mt6357_vpa_reg: buck-vpa {
|
| H A D | richtek,rt5190a-regulator.yaml | 13 The RT5190A integrates 1 channel buck controller, 3 channels high efficiency 14 synchronous buck converters, 1 LDO, I2C control interface and peripherial 57 "^buck[1-4]$|^ldo$": 66 buck operating mode, only buck1/4 support mode operating.
|
| H A D | richtek,rtq2134-regulator.yaml | 31 "^buck[1-3]$": 35 regulator description for buck[1-3]. 41 If specified, buck will listen to 'vsel' pin for dvs config.
|
| H A D | max8997-regulator.txt | 25 [1] If none of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional 26 property is specified, the 'max8997,pmic-buck[1/2/5]-dvs-voltage' 30 If either of the 'max8997,pmic-buck[1/2/5]-uses-gpio-dvs' optional 32 'max8997,pmic-buck[1/2/5]-dvs-voltage' should be specified. 46 that of another buck, which is the side effect of the change (set_voltage).
|
| H A D | maxim,max8997.yaml | 40 If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is 41 specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should 52 If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is 53 specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should 64 If none of max8997,pmic-buck[1/2/5]-uses-gpio-dvs optional property is 65 specified, the max8997,pmic-buck[1/2/5]-dvs-voltage property should 105 of one of the bucks may affect that of another buck, which is the side
|
| /freebsd-14.2/sys/contrib/device-tree/Bindings/mfd/ |
| H A D | axp20x.txt | 88 DCDC2 : DC-DC buck : vin2-supply 89 DCDC3 : DC-DC buck : vin3-supply 100 DCDC1 : DC-DC buck : vin1-supply 101 DCDC2 : DC-DC buck : vin2-supply 102 DCDC3 : DC-DC buck : vin3-supply 103 DCDC4 : DC-DC buck : vin4-supply 104 DCDC5 : DC-DC buck : vin5-supply 126 DCDC1 : DC-DC buck : vin1-supply 129 DCDC4 : DC-DC buck : vin4-supply 178 DCDC1 : DC-DC buck : vin1-supply [all …]
|
| H A D | samsung,s5m8767.yaml | 63 s5m8767,pmic-buck-ds-gpios: 82 s5m8767,pmic-buck-default-dvs-idx: 93 s5m8767,pmic-buck-dvs-gpios: 143 - s5m8767,pmic-buck-ds-gpios 146 s5m8767,pmic-buck2-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] 147 s5m8767,pmic-buck3-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] 148 s5m8767,pmic-buck4-dvs-voltage: [ 's5m8767,pmic-buck-dvs-gpios' ] 199 s5m8767,pmic-buck-default-dvs-idx = <3>; 202 s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, 206 s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, [all …]
|
| H A D | ti,lp87524-q1.yaml | 7 title: TI LP87524-Q1 four 1-phase output buck converter 37 "^buck[0123]$": 50 "^buck[0123]-in-supply$":
|
| H A D | tps65086.txt | 18 after their hardware counterparts: buck[1-6], 25 - ti,regulator-step-size-25mv : This is applicable for buck[1-6], set this 28 - ti,regulator-decay : This is applicable for buck[1-6], set this if
|
| /freebsd-14.2/sys/contrib/device-tree/Bindings/sound/ |
| H A D | qcom,wcd9335.yaml | 55 vdd-buck-supply: 56 description: 1.8V buck supply 58 vdd-buck-sido-supply: 59 description: 1.8V SIDO buck supply 96 - vdd-buck-supply 97 - vdd-buck-sido-supply 112 vdd-buck-supply: false 113 vdd-buck-sido-supply: false 151 vdd-buck-supply = <&vreg_s4a_1p8>; 152 vdd-buck-sido-supply = <&vreg_s4a_1p8>;
|
| H A D | qcom,wcd9335.txt | 58 - vdd-buck-supply: 61 Definition: Should contain a reference to the 1.8V buck supply 63 - vdd-buck-sido-supply: 66 Definition: Should contain a reference to the 1.8V SIDO buck supply 117 vdd-buck-supply = <&pm8994_s4>; 119 vdd-buck-sido-supply = <&pm8994_s4>;
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm64/mediatek/ |
| H A D | mt6380.dtsi | 14 mt6380_vcpu_reg: buck-vcore1 { 23 mt6380_vcore_reg: buck-vcore { 32 mt6380_vrf_reg: buck-vrf {
|
| H A D | mt6357.dtsi | 14 mt6357_vproc_reg: buck-vproc { 23 mt6357_vcore_reg: buck-vcore { 32 mt6357_vmodem_reg: buck-vmodem { 40 mt6357_vs1_reg: buck-vs1 { 49 mt6357_vpa_reg: buck-vpa {
|
| /freebsd-14.2/sys/contrib/device-tree/src/arm/ |
| H A D | stm32mp15xx-dhcor-io1v8.dtsi | 10 vdd_io: regulator-buck-io { 12 regulator-name = "buck-io";
|