| /f-stack/freebsd/contrib/device-tree/Bindings/hwmon/ |
| H A D | max6697.txt | 21 Set to disable SMBus timeout. If not specified, SMBus timeout will be
25 Extended temperature will be disabled if not specified.
29 Beta compensation will be disabled if not specified.
33 If not specified, alert will be enabled for all channels.
38 If not specified, over-temperature reporting will be enabled for all
44 specified as boolean, otherwise as per bit mask specified.
46 If not specified, resistance cancellation will be disabled for all
53 specified.
|
| /f-stack/freebsd/contrib/device-tree/Bindings/arm/firmware/ |
| H A D | sdei.txt | 11 privilege level of the SDEI firmware (specified as part of the binding
12 below) and passing arguments in a manner specified by the "SMC Calling
22 text to handle the specified event number.
32 * "smc" : SMC #0, with the register assignments specified in this
34 * "hvc" : HVC #0, with the register assignments specified in this
|
| /f-stack/freebsd/contrib/device-tree/Bindings/pinctrl/ |
| H A D | qcom,pmic-gpio.txt | 90 Definition: List of gpio pins affected by the properties specified in
118 specified pins. Valid values are:
134 Definition: The specified pins should be configured as no pull.
139 Definition: The specified pins should be configured as pull down.
144 Definition: The specified pins should be configured as pull up.
162 Definition: The specified pins will put in high-Z mode and disabled.
167 Definition: The specified pins are put in input mode.
184 Definition: Selects the power source for the specified pins. Valid
202 Definition: The specified pins are configured in push-pull mode.
207 Definition: The specified pins are configured in open-drain mode.
[all …]
|
| H A D | qcom,mdm9615-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
91 specified pins.
100 Definition: The specified pins should be configured as no pull.
105 Definition: The specified pins should be configured as pull down.
110 Definition: The specified pins should be configured as pull up.
115 Definition: The specified pins are configured in output mode, driven
121 Definition: The specified pins are configured in output mode, driven
127 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,pmic-mpp.txt | 80 Definition: List of MPP pins affected by the properties specified in
93 specified pins. Valid values are:
101 Definition: The specified pins should be configured as no pull.
106 Definition: The specified pins should be configured as pull up.
115 Definition: The specified pins will put in high-Z mode and disabled.
120 Definition: The specified pins are put in input mode, i.e. their input
126 Definition: The specified pins are configured in output mode, driven
132 Definition: The specified pins are configured in output mode, driven
138 Definition: Selects the power source for the specified pins. Valid power
|
| H A D | qcom,apq8084-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
97 specified pins. Functions are only valid for gpio pins.
125 Definition: The specified pins should be configured as no pull.
130 Definition: The specified pins should be configured as pull down.
135 Definition: The specified pins should be configured as pull up.
140 Definition: The specified pins are configured in output mode, driven
147 Definition: The specified pins are configured in output mode, driven
154 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,ipq8074-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
91 specified pins. Functions are only valid for gpio pins.
121 Definition: The specified pins should be configured as no pull.
126 Definition: The specified pins should be configured as pull down.
131 Definition: The specified pins should be configured as pull up.
136 Definition: The specified pins are configured in output mode, driven
142 Definition: The specified pins are configured in output mode, driven
148 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,sdm845-pinctrl.txt | 75 Definition: List of gpio pins affected by the properties specified in
89 specified pins. Functions are only valid for gpio pins.
121 Definition: The specified pins should be configured as no pull.
126 Definition: The specified pins should be configured as pull down.
131 Definition: The specified pins should be configured as pull up.
136 Definition: The specified pins are configured in output mode, driven
143 Definition: The specified pins are configured in output mode, driven
150 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,msm8976-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
99 specified pins. Functions are only valid for gpio pins.
127 Definition: The specified pins should be configured as no pull.
132 Definition: The specified pins should be configured as pull down.
137 Definition: The specified pins should be configured as pull up.
142 Definition: The specified pins are configured in output mode, driven
149 Definition: The specified pins are configured in output mode, driven
156 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,msm8916-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
102 specified pins. Functions are only valid for gpio pins.
133 Definition: The specified pins should be configured as no pull.
138 Definition: The specified pins should be configured as pull down.
143 Definition: The specified pins should be configured as pull up.
148 Definition: The specified pins are configured in output mode, driven
155 Definition: The specified pins are configured in output mode, driven
162 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,msm8960-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
97 specified pins. Functions are only valid for gpio pins.
127 Definition: The specified pins should be configured as no pull.
132 Definition: The specified pins should be configured as pull down.
137 Definition: The specified pins should be configured as pull up.
142 Definition: The specified pins are configured in output mode, driven
149 Definition: The specified pins are configured in output mode, driven
156 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,sm8150-pinctrl.txt | 92 Definition: List of gpio pins affected by the properties specified in
110 specified pins. Functions are only valid for gpio pins.
142 Definition: The specified pins should be configued as no pull.
147 Definition: The specified pins should be configued as pull down.
152 Definition: The specified pins should be configued as pull up.
157 Definition: The specified pins are configured in output mode, driven
164 Definition: The specified pins are configured in output mode, driven
171 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,qcs404-pinctrl.txt | 86 Definition: List of gpio pins affected by the properties specified in
104 specified pins. Functions are only valid for gpio pins.
153 Definition: The specified pins should be configured as no pull.
158 Definition: The specified pins should be configured as pull down.
163 Definition: The specified pins should be configured as pull up.
168 Definition: The specified pins are configured in output mode, driven
175 Definition: The specified pins are configured in output mode, driven
182 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,sc7180-pinctrl.txt | 92 Definition: List of gpio pins affected by the properties specified in
110 specified pins. Functions are only valid for gpio pins.
140 Definition: The specified pins should be configured as no pull.
145 Definition: The specified pins should be configured as pull down.
150 Definition: The specified pins should be configured as pull up.
155 Definition: The specified pins are configured in output mode, driven
162 Definition: The specified pins are configured in output mode, driven
169 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,msm8998-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
100 specified pins. Functions are only valid for gpio pins.
145 Definition: The specified pins should be configured as no pull.
150 Definition: The specified pins should be configured as pull down.
155 Definition: The specified pins should be configured as pull up.
160 Definition: The specified pins are configured in output mode, driven
167 Definition: The specified pins are configured in output mode, driven
174 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,msm8994-pinctrl.txt | 85 Definition: List of gpio pins affected by the properties specified in
100 specified pins. Functions are only valid for gpio pins.
131 Definition: The specified pins should be configured as no pull.
136 Definition: The specified pins should be configured as pull down.
141 Definition: The specified pins should be configured as pull up.
146 Definition: The specified pins are configured in output mode, driven
153 Definition: The specified pins are configured in output mode, driven
160 Definition: Selects the drive strength for the specified pins, in mA.
|
| H A D | qcom,msm8996-pinctrl.txt | 83 Definition: List of gpio pins affected by the properties specified in
98 specified pins. Functions are only valid for gpio pins.
152 Definition: The specified pins should be configured as no pull.
157 Definition: The specified pins should be configured as pull down.
162 Definition: The specified pins should be configured as pull up.
167 Definition: The specified pins are configured in output mode, driven
174 Definition: The specified pins are configured in output mode, driven
181 Definition: Selects the drive strength for the specified pins, in mA.
|
| /f-stack/freebsd/contrib/device-tree/Bindings/display/bridge/ |
| H A D | dw_hdmi.txt | 15 - reg-io-width: Width of the registers specified by the reg property. The
16 value is expressed in bytes and must be equal to 1 or 4 if specified. The
21 - clocks: References to all the clocks specified in the clock-names property
22 as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt.
31 expressed in using ports as specified in the device graph bindings defined
|
| /f-stack/freebsd/contrib/device-tree/Bindings/clock/ |
| H A D | clk-exynos-audss.txt | 23 is used if not specified.
25 is used if not specified.
27 specified.
29 not specified.
31 specified.
45 Exynos4 SoC and this is specified where applicable.
74 specified.
|
| /f-stack/freebsd/contrib/device-tree/Bindings/input/touchscreen/ |
| H A D | iqs5xx.txt | 25 maximum x-coordinate is specified by the
29 maximum y-coordinate is specified by the
46 which may already be specified by the device's
50 which may already be specified by the device's
54 which may already be specified by the device's
|
| /f-stack/dpdk/drivers/net/vdev_netvsc/ |
| H A D | vdev_netvsc.c | 513 unsigned int specified = va_arg(ap, unsigned int); in vdev_netvsc_netvsc_probe() local
520 if (specified) { in vdev_netvsc_netvsc_probe()
550 if (!specified) in vdev_netvsc_netvsc_probe()
561 if (!specified) in vdev_netvsc_netvsc_probe()
666 unsigned int specified = 0; in vdev_netvsc_vdev_probe() local
688 ++specified; in vdev_netvsc_vdev_probe()
692 if (specified > 1) { in vdev_netvsc_vdev_probe()
699 kvargs, specified, &matched); in vdev_netvsc_vdev_probe()
702 if (specified && matched < specified) { in vdev_netvsc_vdev_probe()
709 kvargs, specified, &matched) < 0) in vdev_netvsc_vdev_probe()
[all …]
|
| /f-stack/freebsd/contrib/device-tree/Bindings/timer/ |
| H A D | samsung,exynos4210-mct.yaml | 32 interrupts should be specified after the four global timer interrupts
33 have been specified:
45 interrupt might be specified, meaning that all local timers use the same
60 // interrupts, so two local timer interrupts have been specified,
94 // interrupt is specified.
111 // interrupts are specified.
|
| /f-stack/freebsd/contrib/device-tree/Bindings/net/can/ |
| H A D | cc770.txt | 21 controller is half of that value. If not specified, a default
25 If not specified or if the specified value is 0, the CLKOUT pin
28 - bosch,slew-rate : slew rate of the CLKOUT signal. If not specified,
|
| /f-stack/freebsd/contrib/device-tree/Bindings/power/supply/ |
| H A D | bq24257.txt | 20 state. If this pin is not specified a software-based approach for PG
23 (in uA). If this property is not specified, the input limit current is
28 not specified a default of 6,5000,000 (=6.5V) is used.
30 power path management (in uV). If not specified a default of 4,360,000
|
| /f-stack/freebsd/contrib/device-tree/Bindings/pci/ |
| H A D | pci-keystone.txt | 25 msi-map: As specified in Documentation/devicetree/bindings/pci/pci-msi.txt
84 num-ib-windows: As specified in
86 num-ob-windows: As specified in
88 num-lanes: As specified in
99 number of lanes as specified in *num-lanes* property.
100 ("phys" and "phy-names" DT bindings are specified in
|