| /f-stack/freebsd/contrib/device-tree/Bindings/regulator/ |
| H A D | qcom,rpmh-regulator.txt | 42 "qcom,pm8005-rpmh-regulators"
43 "qcom,pm8009-rpmh-regulators"
44 "qcom,pm8150-rpmh-regulators"
45 "qcom,pm8150l-rpmh-regulators"
46 "qcom,pm8998-rpmh-regulators"
47 "qcom,pmi8998-rpmh-regulators"
48 "qcom,pm6150-rpmh-regulators"
64 regulators for this PMIC.
92 regulators for this PMIC.
126 pm8998-rpmh-regulators {
[all …]
|
| H A D | tps65217.txt | 1 TPS65217 family of regulators
6 - regulators: list of regulators provided by this controller, must be named
8 - regulators: This is the list of child nodes that specify the regulator
9 initialization data for defined regulators. Not all regulators for the given
11 using the standard binding for regulators found at
17 The valid names for regulators are:
20 Each regulator is defined using the standard binding for regulators.
28 regulators {
|
| H A D | tps65023.txt | 1 TPS65023 family of regulators
9 - regulators: list of regulators provided by this controller, must be named
11 - regulators: This is the list of child nodes that specify the regulator
12 initialization data for defined regulators. The definition for each of
13 these nodes is defined using the standard binding for regulators found at
16 Each regulator is defined using the standard binding for regulators.
24 regulators {
|
| H A D | qcom,smd-rpm-regulator.yaml | 61 - qcom,rpm-mp5496-regulators
62 - qcom,rpm-pm8841-regulators
63 - qcom,rpm-pm8916-regulators
64 - qcom,rpm-pm8941-regulators
65 - qcom,rpm-pm8950-regulators
66 - qcom,rpm-pm8994-regulators
67 - qcom,rpm-pm8998-regulators
68 - qcom,rpm-pma8084-regulators
69 - qcom,rpm-pmi8994-regulators
71 - qcom,rpm-pms405-regulators
[all …]
|
| H A D | mt6311-regulator.txt | 6 - regulators: List of regulators provided by this controller. It is named
9 for regulators at Documentation/devicetree/bindings/regulator/regulator.txt.
11 The valid names for regulators are:
22 regulators {
|
| H A D | tps65218.txt | 1 TPS65218 family of regulators
7 - List of regulators provided by this controller, must be named
10 initialization data for defined regulators. Not all regulators for the given
12 using the standard binding for regulators found at ./regulator.txt.
14 The valid names for regulators are:
17 Each regulator is defined using the standard binding for regulators.
|
| H A D | slg51000.txt | 7 These entries are required if regulators are enabled for a device.
24 - regulators : This node defines the settings for the regulators.
26 for regulators; see regulator.txt.
28 The SLG51000 regulators are bound using their names listed below:
37 Optional properties for regulators:
45 regulators {
|
| H A D | qcom,spmi-regulator.txt | 7 "qcom,pm8004-regulators"
8 "qcom,pm8005-regulators"
9 "qcom,pm8841-regulators"
10 "qcom,pm8916-regulators"
11 "qcom,pm8941-regulators"
12 "qcom,pm8950-regulators"
13 "qcom,pm8994-regulators"
15 "qcom,pms405-regulators"
198 regulators.
269 regulators {
[all …]
|
| H A D | da9211.txt | 9 - regulators: A node that houses a sub-node for each regulator within the
12 standard binding for regulators; see regulator.txt.
27 regulators {
47 regulators {
73 regulators {
91 regulators {
109 regulators {
135 regulators {
161 regulators {
187 regulators {
|
| H A D | sprd,sc2731-regulator.txt | 1 Spreadtrum SC2731 Voltage regulators
11 List of regulators provided by this controller. It is named according to
13 of these nodes is defined using the standard binding for regulators at
16 The valid names for regulators are:
25 regulators {
|
| H A D | max77802.txt | 1 Binding for Maxim MAX77802 regulators
7 regulators that can be controlled over I2C.
33 - regulators : The regulators of max77802 have to be instantiated
34 under subnode named "regulators" using the following format.
51 Power Mode. Some regulators support the modes to be changed at startup or by
56 The regulators that support the standard "regulator-initial-mode" property,
66 The standard "regulator-mode" property can only be used for regulators that
67 support changing their mode to Low Power Mode during suspend. These regulators
84 regulators {
|
| H A D | maxim,max77826.yaml | 22 regulators:
26 list of regulators provided by this controller, must be named
43 - regulators
57 regulators {
|
| H A D | max77686.txt | 1 Binding for Maxim MAX77686 regulators
7 regulators that can be controlled over I2C.
12 - voltage-regulators : The regulators of max77686 have to be instantiated
13 under subnode named "voltage-regulators" using the following format.
49 voltage-regulators {
|
| H A D | mps,mp5416.yaml | 22 regulators:
25 list of regulators provided by this controller, must be named
42 - regulators
56 regulators {
|
| H A D | 88pm800.txt | 6 - regulators: A node that houses a sub-node for each regulator within the
10 regulators; see regulator.txt.
12 The valid names for regulators are:
23 regulators {
|
| H A D | pfuze100.txt | 1 PFUZE100 family of regulators
9 regulators to save power consumption. Attention, ensure that all important
10 regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on"
22 - regulators: This is the list of child nodes that specify the regulator
23 initialization data for defined regulators. Please refer to below doc
26 The valid names for regulators are:
36 Each regulator is defined using the standard binding for regulators.
44 regulators {
145 regulators {
239 regulators {
[all …]
|
| H A D | as3722-regulator.txt | 2 Name of the regulator subnode must be "regulators".
6 The input supply of regulators are the optional properties on the
7 regulator node. The AS3722 is having 7 DCDC step-down regulators as
9 regulators are provided through following properties:
23 - regulators : Must contain a sub-node per regulator from the list below.
49 regulators {
|
| H A D | nvidia,tegra-regulators-coupling.txt | 4 NVIDIA Tegra SoC's have a mandatory voltage-coupling between regulators.
5 Thus on Tegra20 there are 3 coupled regulators and on NVIDIA Tegra30
11 On Tegra20 SoC's there are 3 coupled regulators: CORE, RTC and CPU.
18 On Tegra30 SoC's there are 2 coupled regulators: CORE and CPU. The CORE
34 regulators {
|
| H A D | mt6380-regulator.txt | 3 All voltage regulators provided by the MT6380 PMIC are described as the
4 subnodes of the MT6380 regulators node. Each regulator is named according
6 of these nodes is defined using the standard binding for regulators at
9 The valid names for regulators are:
17 regulators {
|
| H A D | qcom,smd-rpm-regulator.txt | 22 "qcom,rpm-pm8841-regulators"
23 "qcom,rpm-pm8916-regulators"
24 "qcom,rpm-pm8941-regulators"
25 "qcom,rpm-pm8950-regulators"
26 "qcom,rpm-pm8994-regulators"
27 "qcom,rpm-pm8998-regulators"
28 "qcom,rpm-pma8084-regulators"
29 "qcom,rpm-pmi8994-regulators"
30 "qcom,rpm-pmi8998-regulators"
31 "qcom,rpm-pms405-regulators"
[all …]
|
| H A D | hisilicon,hi655x-regulator.txt | 1 Hisilicon Hi655x Voltage regulators
11 The valid names for regulators are:
20 regulators {
|
| H A D | onnn,fan53880.yaml | 40 regulators:
44 list of regulators provided by this controller, must be named
61 - regulators
77 regulators {
|
| /f-stack/freebsd/contrib/device-tree/Bindings/mfd/ |
| H A D | tps6507x.txt | 6 - regulators: This is the list of child nodes that specify the regulator
7 initialization data for defined regulators. Not all regulators for the
9 is defined using the standard binding for regulators found at
16 These entries are required if regulators are enabled for a device.
28 - defdcdc_default: It's property of DCDC2 and DCDC3 regulators.
43 regulators {
|
| H A D | lp87565.txt | 11 populated under regulators node. xxx should match
24 regulators: regulators {
57 populated under regulators node. xxx should match
69 regulators: regulators {
|
| H A D | max77802.txt | 4 efficiency Buck regulators, 32 Low-DropOut (LDO) regulators used to power
7 regulators, clocks outputs and the RTC.
10 regulators are defined in ../clk/maxim,max77802.txt and
|