Changes in Makefile

c8b72c30 - riscv: dts: starfive: add DeepComputing FML13V01 board device tree

Mon, 28 Oct 2024 08:25:53 +0000

riscv: dts: starfive: add DeepComputing FML13V01 board device treeThe FML13V01 board from DeepComputing incorporates a StarFive JH7110 SoC.It is a mainboard designed for the Framework Laptop 13 Chassis, which has(Framework) SKU FRANHQ0001.The FML13V01 board features:- StarFive JH7110 SoC- LPDDR4 8GB- eMMC 32GB or 128GB- QSPI Flash- MicroSD Slot- PCIe-based Wi-Fi- 4 USB-C Ports - Port 1: PD 3.0 (60W Max), USB 3.2 Gen 1, DP 1.4 (4K@30Hz/2.5K@60Hz) - Port 2: PD 3.0 (60W Max), USB 3.2 Gen 1 - Port 3 & 4: USB 3.2 Gen 1Create the DTS file for the DeepComputing FML13V01 board. Based on'jh7110-common.dtsi', usb0 is enabled and is set to operate as a "host".Signed-off-by: Sandie Cao [elder@riscstar.com: revised the description, updated some nodes]Signed-off-by: Alex Elder Signed-off-by: Guodong Xu Reviewed-by: Emil Renner Berthing Signed-off-by: Conor Dooley List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile

2606bf58 - riscv: dts: starfive: add Star64 board devicetree

Thu, 23 May 2024 21:55:38 +0000

riscv: dts: starfive: add Star64 board devicetreeThe Pine64 Star64 is a development board based on the Starfive JH7110 SoC.The board features:- JH7110 SoC- 4/8 GiB LPDDR4 DRAM- AXP15060 PMIC- 40 pin GPIO header- 1x USB 3.0 host port- 3x USB 2.0 host port- 1x eMMC slot- 1x MicroSD slot- 1x QSPI Flash- 2x 1Gbps Ethernet port- 1x HDMI port- 1x 4-lane DSI- 1x 2-lane CSI- 1x PCIe 2.0 x1 laneSigned-off-by: Henry Bell Signed-off-by: Conor Dooley List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile

9276badd - riscv: dts: starfive: add Milkv Mars board device tree

Mon, 29 Apr 2024 00:13:17 +0000

riscv: dts: starfive: add Milkv Mars board device treeThe Milkv Mars is a development board based on the Starfive JH7110 SoC.The board features:- JH7110 SoC- 1/2/4/8 GiB LPDDR4 DRAM- AXP15060 PMIC- 40 pin GPIO header- 3x USB 3.0 host port- 1x USB 2.0 host port- 1x M.2 E-Key- 1x eMMC slot- 1x MicroSD slot- 1x QSPI Flash- 1x 1Gbps Ethernet port- 1x HDMI port- 1x 2-lane DSI and 1x 4-lane DSI- 1x 2-lane CSIAdd the devicetree file describing the currently supported features,namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet.Signed-off-by: Jisheng Zhang Reviewed-by: Emil Renner Berthing Signed-off-by: Conor Dooley List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile

ef6012f3 - riscv: dts: Enable device-tree overlay support for starfive devices

Tue, 27 Jun 2023 08:06:20 +0000

riscv: dts: Enable device-tree overlay support for starfive devicesAdd the '-@' DTC option for the starfive devices. This optionpopulates the '__symbols__' node that contains all the necessary symbolsfor supporting device-tree overlays (for instance from the firmware orthe bootloader) on these devices.The starfive devices allow various modules to be connected and thisenables users to create out-of-tree device-tree overlays for these modules.Please note that this change does increase the size of the resulting DTBby ~20%. For example, with v6.4 increase in size is as follows:jh7100-beaglev-starlight.dtb 6192 -> 7339jh7100-starfive-visionfive-v1.dtb 6281 -> 7428jh7110-starfive-visionfive-2-v1.2a.dtb 11101 -> 13447jh7110-starfive-visionfive-2-v1.3b.dtb 11101 -> 13447Signed-off-by: Felix Moessbauer Acked-by: Emil Renner Berthing Acked-by: Palmer Dabbelt Signed-off-by: Conor Dooley List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile

54baba33 - riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree

Sat, 01 Apr 2023 11:19:33 +0000

riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device treeAdd a minimal device tree for StarFive JH7110 VisionFive 2 boardwhich has version A and version B. Support booting and basicclock/reset/pinctrl/uart drivers.Tested-by: Tommaso Merciai Reviewed-by: Conor Dooley Acked-by: Conor Dooley Signed-off-by: Emil Renner Berthing Co-developed-by: Jianlong Huang Signed-off-by: Jianlong Huang Co-developed-by: Hal Feng Signed-off-by: Hal Feng Reviewed-by: Emil Renner Berthing Signed-off-by: Conor Dooley List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile

19ba9cf7 - RISC-V: kbuild: convert all use of SOC_FOO to ARCH_FOO

Sun, 20 Nov 2022 21:34:44 +0000

RISC-V: kbuild: convert all use of SOC_FOO to ARCH_FOOConvert all non user visible use of SOC_FOO symbols to their ARCH_FOOvariants. The canaan DTs are an outlier in that they're gated at thedirectory and the file level. Drop the directory level gating while weare swapping the symbol names over.Signed-off-by: Conor Dooley List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile

ab8ec079 - riscv: dts: starfive: Add StarFive VisionFive V1 device tree

Mon, 17 Oct 2022 21:05:42 +0000

riscv: dts: starfive: Add StarFive VisionFive V1 device treeAdd initial device tree for the StarFive VisionFive V1 SBC, whichis similar with the already supported BeagleV Starlight Beta board,both being based on the StarFive JH7100 SoC.Link: https://github.com/starfive-tech/VisionFiveSigned-off-by: Cristian Ciocaltea Reviewed-by: Conor Dooley Reviewed-by: Matthias Brugger Signed-off-by: Conor Dooley List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile

a4367627 - RISC-V: Add BeagleV Starlight Beta device tree

Sun, 10 Oct 2021 17:48:36 +0000

RISC-V: Add BeagleV Starlight Beta device treeAdd initial device tree for the BeagleV Starlight Beta board. About 300of these boards were sent out as part of a now cancelled BeagleBoard.orgproject.I2C timing data is based on the device tree in the vendor u-boot port.Heartbeat LED added by Geert.Acked-by: Palmer Dabbelt Co-developed-by: Geert Uytterhoeven Signed-off-by: Geert Uytterhoeven Signed-off-by: Emil Renner Berthing List of files: /linux-6.15/scripts/dtc/include-prefixes/riscv/starfive/Makefile