Changes in Makefile

e3e8b199 - arm64: dts: imx95: Add imx95-15x15-evk support

Fri, 21 Feb 2025 21:16:00 +0000

arm64: dts: imx95: Add imx95-15x15-evk supportAdd imx95-15x15-evk support.Signed-off-by: Frank Li Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

d7b2b64b - arm64: dts: imx8mp-skov: support new 7" panel board

Tue, 18 Feb 2025 18:38:18 +0000

arm64: dts: imx8mp-skov: support new 7" panel boardThis board is very similar to the already upstreamimx8mp-skov-revb-mi1010ait-1cp1.dts with the difference that it uses adifferent 7" LVDS panel.Signed-off-by: Ahmad Fatoum Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

f18ec295 - arm64: dts: imx8mp-skov: add revC BD500 board

Tue, 18 Feb 2025 18:38:17 +0000

arm64: dts: imx8mp-skov: add revC BD500 boardThe BD500 replaces the touch display with 3 bicolor LEDs and a pushbutton on top of a Skov i.MX8-CPU revision C.Signed-off-by: Oleksij Rempel Signed-off-by: Ahmad Fatoum Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

34662050 - arm64: dts: imx8mp-skov: add basic board as fallback

Tue, 18 Feb 2025 18:38:14 +0000

arm64: dts: imx8mp-skov: add basic board as fallbackAll Skov i.MX8MP boards share the same baseboard (modulo revisions)and are booted with the same bootloader image, which samples somestrapping pins at startup and determines which kernel device treeto use.For use as bootloader device tree and as fallback, when no matchingdevice tree has been found, add a basic variant that doesn't configureany variant-specific peripherals like displays.Signed-off-by: Oleksij Rempel Signed-off-by: Ahmad Fatoum Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

9e87325a - arm64: dts: imx8mm-phycore-som: Add overlay to disable SPI NOR flash

Tue, 18 Feb 2025 07:41:56 +0000

arm64: dts: imx8mm-phycore-som: Add overlay to disable SPI NOR flashThere are SoM variants with no SPI NOR flash populated. Add overlay to beable to support this.Signed-off-by: Teresa Remmet Signed-off-by: Andrej Picej Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

f432f543 - arm64: dts: imx8mm-phycore-som: Add no-eth phy overlay

Tue, 18 Feb 2025 07:41:55 +0000

arm64: dts: imx8mm-phycore-som: Add no-eth phy overlayThere are SoM variants with no eth phy populated. Add overlay to beable to support this.Signed-off-by: Teresa Remmet Signed-off-by: Andrej Picej Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

7b776229 - arm64: dts: imx8mm-phycore-som: Add overlay for rproc

Tue, 18 Feb 2025 07:41:54 +0000

arm64: dts: imx8mm-phycore-som: Add overlay for rprocAdds a devicetree overlay containing reserved memory regions usedfor intercore communication between A53 and M4 cores.Signed-off-by: Dominik Haller Signed-off-by: Andrej Picej Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

481bc9d5 - arm64: dts: imx8mm-phyboard-polis: Add overlay for PEB-EVAL-01

Tue, 18 Feb 2025 07:41:53 +0000

arm64: dts: imx8mm-phyboard-polis: Add overlay for PEB-EVAL-01Add support for the PEB-EVAL-01 expansion board forphyBOARD-Polis-i.MX8MM.Signed-off-by: Janine Hagemann Signed-off-by: Andrej Picej Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

18116971 - arm64: dts: imx8mm-phyboard-polis: Add support for PEB-AV-10

Tue, 18 Feb 2025 07:41:52 +0000

arm64: dts: imx8mm-phyboard-polis: Add support for PEB-AV-10PEB-AV-10 is an Audio/Video extension module which extendsphyBOARD-Polis i.MX8MM.With MIPI DSI to LVDS bridge already populated on SoM the PEB-AV-10 addssupport for:- connecting 10" display,- audio with TLV320AIC and- EEPROM.Signed-off-by: Teresa Remmet Signed-off-by: Andrej Picej Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

c95fc1e1 - arm64: dts: imx8q: add PCIe EP overlay file for i.MX8QXP mek board

Tue, 28 Jan 2025 21:15:57 +0000

arm64: dts: imx8q: add PCIe EP overlay file for i.MX8QXP mek boardAdd PCIe EP overlay file for i.MX8QXP mek board to let PCI work as endpointmode.Signed-off-by: Frank Li Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

9d9c8fac - arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cards

Tue, 12 Nov 2024 10:05:46 +0000

arm64: dts: imx8mp-evk: Add NXP LVDS to HDMI adapter cardsOne ITE IT6263 LVDS to HDMI converter is populated on NXP IMX-LVDS-HDMIand IMX-DLVDS-HDMI adapter cards.Card IMX-LVDS-HDMI supports single LVDS link(IT6263 link1).Card IMX-DLVDS-HDMI supports dual LVDS links(IT6263 link1 and link2).Only one card can be enabled with one i.MX8MP EVK.Add dedicated overlays to support the below four connections:1) imx8mp-evk-lvds0-imx-lvds-hdmi.dtso: i.MX8MP EVK LVDS0 connector <=> LVDS adapter card J6(IT6263 link1)2) imx8mp-evk-lvds1-imx-lvds-hdmi.dtso: i.MX8MP EVK LVDS1 connector <=> LVDS adapter card J6(IT6263 link1)3) imx8mp-evk-lvds0-imx-dlvds-hdmi-channel0.dtso: i.MX8MP EVK LVDS0 connector <=> DLVDS adapter card channel0(IT6263 link1) i.MX8MP EVK LVDS1 connector <=> DLVDS adapter card channel1(IT6263 link2)4) imx8mp-evk-lvds1-imx-dlvds-hdmi-channel0.dtso: i.MX8MP EVK LVDS1 connector <=> DLVDS adapter card channel0(IT6263 link1) i.MX8MP EVK LVDS0 connector <=> DLVDS adapter card channel1(IT6263 link2)Part links:https://www.nxp.com/part/IMX-LVDS-HDMIhttps://www.nxp.com/part/IMX-DLVDS-HDMISigned-off-by: Liu Ying Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

eead8f35 - arm64: dts: imx8mp: add aristainetos3 board support

Tue, 05 Nov 2024 06:42:06 +0000

arm64: dts: imx8mp: add aristainetos3 board supportAdd support for the i.MX8MP based aristainetos3 boards from ABB.The board uses a ABB specific SoM from ADLink, based on NXPi.MX8MP SoC. The SoM is used on 3 different carrier boards,with small differences.Signed-off-by: Heiko Schocher Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

2b5a5006 - arm64: dts: imx8mp: Add Boundary Device Nitrogen8MP Universal SMARC Carrier Board

Wed, 23 Oct 2024 09:11:14 +0000

arm64: dts: imx8mp: Add Boundary Device Nitrogen8MP Universal SMARC Carrier BoardAdds the DTSI file for the Nitrogen8MP SMARC System on Module whichis delivered with the Nitrogen8MP Universal SMARC Carrier Board.Initial support includes:- Serial console- eMMC- SD cardSigned-off-by: Bhavin Sharma Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

b7416c69 - arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X support

Tue, 22 Oct 2024 15:30:31 +0000

arm64: dts: imx: Add i.MX8M Plus Gateworks GW82XX-2X supportThe Gateworks GW82XX-2X is an ARM based single board computer (SBC)comprised of the i.MX8M Plus based gw702x SoM and the gw82xx baseboardfeaturing: - i.MX8M Plus SoC - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller (GSC) - microSD (1.8V/3.3V Capable) - panel status bi-color LED - pushbutton switch - fan controller with tachometer - USB Type-C connector - PCIe switch - 2x GbE RJ45 connectors - multi-protocol RS232/RS485/RS422 Serial ports - 2x Flexible Socket Adapters with SDIO/UART/USB/PCIe (for M.2 and miniPCIe expansion) - 2x isolated CAN - GPS - accelerometer - magnetometer - off-board connectors for: SPI, GPIO, I2C, ADC - Wide range DC power input - support for 802.3at PoE (via adapter)Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

33e18fc4 - arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS support

Tue, 08 Oct 2024 14:37:46 +0000

arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS supportThe Kontron Electronics DL i.MX8MM consists of the BL i.MX8MM boardand a 7" LVDS panel. Provide an overlay that enables the panel.Signed-off-by: Frieder Schrempf Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

4a0dc71f - arm64: dts: imx8mp-evk: add PCIe Endpoint function overlay file

Tue, 01 Oct 2024 18:37:47 +0000

arm64: dts: imx8mp-evk: add PCIe Endpoint function overlay filePCIe of i.MX8MP is dual role PCIe controller, which can work as rootcomplex (RC) mode and endpoint (EP) mode. Add overlay file to let it workas EP mode.Signed-off-by: Frank Li Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

004ccf43 - arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM PicoITX

Fri, 18 Oct 2024 02:54:14 +0000

arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM PicoITXAdd support for DH electronics i.MX8M Plus DHCOM SoM on PicoITX carrier board.This system is populated with serial console, EQoS ethernet, eMMC, SD, SPI NOR,LEDs and USB 3.0 host used in USB 2.0 mode on PicoITX.Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

05be20cc - arm64: dts: imx8mp: Add DH i.MX8MP DHCOM SoM on DRC02 carrier board

Wed, 25 Sep 2024 16:03:08 +0000

arm64: dts: imx8mp: Add DH i.MX8MP DHCOM SoM on DRC02 carrier boardAdd support for DH electronics i.MX8MP DHCOM SoM on DRC02 carrier board.This system is populated with two ethernet ports, two CANs, RS485 and RS232,USB, capacitive buttons and an OLED display.Signed-off-by: Marek Vasut Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

49c2a677 - arm64: dts: imx: Add imx8mp-iota2-lumpy board

Wed, 25 Sep 2024 12:49:03 +0000

arm64: dts: imx: Add imx8mp-iota2-lumpy boardThe IOTA2 Lumpy board is based on the i.MX8MPlus EVK.Basic features are:- 4GB LPDDR4- 64GB eMMC- 2x 1GB Ethernet- USB 3.0 Type-C dual role port, without power delivery- USB 3.0 Type-A host port- RGB LED - PWM driven- speaker - PWM driven- RTC with super capacitor backupReviewed-by: Marco Felsch Signed-off-by: Michal Vokáč Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile

b98948b0 - arm64: dts: freescale: imx8mp-verdin: Add Ivy carrier board

Tue, 24 Sep 2024 11:40:53 +0000

arm64: dts: freescale: imx8mp-verdin: Add Ivy carrier boardAdd Toradex Verdin Ivy carrier board support. One notable feature of Ivyis the analog inputs. These inputs are multiplexed, allowing the sameinput to measure either voltage or current. For current measurements,a GPIO switch enables or disables the shunt resistor. This process isautomatically managed by the Linux kernel using the IIO and MUXsubsystems. Voltage measurement is always enabled, but the voltagemeasured by the ADC is scaled by a cascade voltage divider. In thedevice tree, the equivalent gain of the voltage divider is used, whichcan be calculated as follows: ------------ + | .-. R1=30K | | | | '-' |------------------- Analog Input (AIN) | | .-. .-. R2=10K | | R3=30K | | | | | | '-' '-' | | | |-------- | .-. + | R4=10K | | | | | ADC Input (Channels 0 and 1) | '-' - | | - -----------| |-------- === === GND GNDVin = Analog Input (AIN)Vout = ADC InputRth = Thevenin Equiv. ResistanceVth = Thevenin Equiv. VoltageRL = Load ResistorR1 = 30K, R2 = 10K, R3 = 30K, R4 = 10KRL = R4 = 10KRth = (R1 // R2) + R3 = 37500 OhmsVth = (Vin * R2) / (R1 + R2) = Vin/4;Vout = (Vth * RL)/ (Rth + RL) = Vth/4.75 = Vin/19Gain = Vout/Vin = 1/19https://www.toradex.com/products/carrier-board/ivy-carrier-boardSigned-off-by: João Paulo Gonçalves Signed-off-by: Francesco Dolcini Signed-off-by: Shawn Guo List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/freescale/Makefile