Changes in Makefile

2873085a - arm64: dts: allwinner: h700: Add Anbernic RG35XX-SP

Wed, 10 Jul 2024 23:17:18 +0000

arm64: dts: allwinner: h700: Add Anbernic RG35XX-SPThe Anbernic RG35XXSP is almost identical to the RG35XX-Plus, but in aclamshell form-factor. The key differences between the SP and the Plusis a lid switch and an RTC on the same i2c bus as the PMIC.Signed-off-by: Chris Morgan Reviewed-by: Andre Przywara Link: https://lore.kernel.org/r/20240710231718.106894-5-macroalpha82@gmail.comSigned-off-by: Chen-Yu Tsai List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

0d185df6 - arm64: dts: allwinner: h700: Add RG35XX-H DTS

Sat, 27 Apr 2024 11:02:28 +0000

arm64: dts: allwinner: h700: Add RG35XX-H DTSThe RG35XX-H adds thumbsticks, a stereo speaker, and a second USB port tothe RG35XX-Plus, and has a horizontal form factor.Enabled in this DTS:- Thumbsticks- Second USB portSigned-off-by: Ryan Walklin Reviewed-by: Andre Przywara Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20240427110225.727472-8-ryan@testtoast.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

398e5fdf - arm64: dts: allwinner: h700: Add RG35XX-Plus DTS

Sat, 27 Apr 2024 11:02:27 +0000

arm64: dts: allwinner: h700: Add RG35XX-Plus DTSThe RG35XX-Plus adds a RTL8221CS SDIO Wifi/BT chip to the RG35XX (2024).Enabled in this DTS:- WiFi- Bluetooth- Supporting power sequence and GPIOsSigned-off-by: Ryan Walklin Reviewed-by: Andre Przywara Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20240427110225.727472-7-ryan@testtoast.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

0923a6c6 - arm64: dts: allwinner: h700: Add RG35XX 2024 DTS

Sat, 27 Apr 2024 11:02:26 +0000

arm64: dts: allwinner: h700: Add RG35XX 2024 DTSThe base model RG35XX (2024) is a handheld gaming device based on anAllwinner H700 chip.The H700 is a H616 variant (4x ARM Cortex-A53 cores @ 1.5Ghz with Mali G31GPU) which exposes RGB LCD and NMI pins.Device features:- Allwinner H700 @ 1.5GHz- 1GB LPDDR4 DRAM- X-Powers AXP717 PMIC- 3.5" 640x480 RGB LCD- Two microSD slots- Mini-HDMI out- GPIO keypad- 3.5mm headphone jack- USB-C charging portEnabled in this DTS:- AXP717 PMIC with RSB serial interface, regulators and NMI interrupt controller- Power LED (charge LED on device controlled directly by PMIC)- Serial UART (accessible from headers on the board)- First SD slot (SD2 appears to have a GPIO-switched regulator for 1.8v low-voltage signalling, this is not yet modeled. Enablement with a switched regulator will be confirmed and posted in a follow-up patch).Signed-off-by: Ryan Walklin Reviewed-by: Jernej Skrabec Reviewed-by: Andre Przywara Link: https://lore.kernel.org/r/20240427110225.727472-6-ryan@testtoast.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

04a9963b - arm64: dts: allwinner: Add Tanix TX1 support

Thu, 18 Apr 2024 10:49:42 +0000

arm64: dts: allwinner: Add Tanix TX1 supportThe Tanix TX1 is a tiny TV box with the Allwinner H313 SoC. The boxfeatures no Ethernet or an SD card slot, which makes booting from itsomewhat interesting: Pressing the hidden FEL button and using a USB-Ato USB-A cable to upload code from a host PC is one way to run mainline.The box features: - Allwinner H313 SoC (4 * Arm Cortex-A53 cores) - 1 or 2 GB DRAM - 8 or 16 GB eMMC flash - SCI S9082H WiFi chip - HDMI port - one USB 2.0 port - 3.5mm AV port - barrel plug 5V DC input via barrel plugThe devicetree covers most peripherals.The eMMC did not work properly in HS200 speed mode, so this mode propertyis omitted. HS-DDR seems to work fine.The blue LED is connected to the same GPIO pin as the red LED, justusing the opposite polarity. Apparently there is no way of describingthis in DT, so the red LED is omitted.Next to the FEL button is a hidden button, that can be pushed by usingsomething like a paperclip, through the ventilation vents of the case.Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20240418104942.1556914-3-andre.przywara@arm.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

b9957d2d - arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board support

Sun, 11 Feb 2024 08:17:39 +0000

arm64: dts: allwinner: h616: Add Sipeed Longan SoM 3H and Pi 3H board supportThe Sipeed Longan SoM 3H is a system on module based on the AllwinnerH618 SoC. The SoM features:- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU- 2/4 GiB LPDDR4 DRAM SoMs- AXP313a PMIC- eMMCThe Sipeed Longan PI 3H is a development board based on the above SoM.The board features:- Longan SoM 3H- Raspberry-Pi-1 compatible GPIO header- 2 USB 2.0 host port- 1 USB 2.0 type C port (power supply + OTG)- MicroSD slot- 1Gbps Ethernet port (via RTL8211 PHY)- HDMI port- WiFi/BT chipAdd the devicetree file describing the currently supported features,namely PMIC, LEDs, UART, SD card, eMMC, USB and Ethernet.Signed-off-by: Jisheng Zhang Reviewed-by: Andre Przywara Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20240211081739.395-3-jszhang@kernel.orgSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

4d39a8eb - arm64: dts: allwinner: Add Jide Remix Mini PC support

Fri, 09 Feb 2024 11:40:18 +0000

arm64: dts: allwinner: Add Jide Remix Mini PC supportThe Remix Mini PC is a "mini computer" using the Allwinner H64 SoC,which appears to be just a relabelled A64. It was launched in 2015 bythe now defunct company Jide, and shipped with a desktop optimisedversion of Android. It features - Allwinner H64 Soc (4 * Arm Cortex-A53 cores) - 1 or 2 GB DRAM - 8 or 16 GB eMMC flash - 100 MBit Ethernet port (using an X-Powers AC200 PHY) - RTL8723BS WiFi & Bluetooth chip - HDMI port - two USB 2.0 ports - 3.5mm AV port - microSD card slotThe devicetree covers most peripherals, though there is no agreedbinding for the PHY chip yet, so this is left out.The eMMC did not work with the MMC DDR speed mode, so this mode propertyis omitted.Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20240209114018.3580370-4-andre.przywara@arm.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

cbec6572 - arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to Makefile

Thu, 22 Feb 2024 21:13:26 +0000

arm64: dts: allwinner: h616: Add Orange Pi Zero 2W to MakefileOrange Pi Zero 2W dts file is not included in Makefile. Fix this.Fixes: c505ee1eae18 ("arm64: dts: allwinner: h616: add Orange Pi Zero 2W support")Reviewed-by: Andre Przywara Link: https://lore.kernel.org/r/20240222211326.114955-1-jernej.skrabec@gmail.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

557e5347 - arm64: dts: allwinner: h618: add Transpeed 8K618-T TV box

Thu, 14 Dec 2023 01:53:12 +0000

arm64: dts: allwinner: h618: add Transpeed 8K618-T TV boxThis is a Chinese TV box, probably very similar if not identical tovarious other cheap TV boxes with the same specs: - Allwinner H618 SoC (4 * Arm Cortex-A53 cores, 1MB L2 cache) - 2 or 4GiB DDR3L DRAM - 32, 64, or 128 GiB eMMC flash - AXP313a PMIC - 100 Mbit/s Ethernet (using yet unsupported internal PHY) - HDMI port - 2 * USB 2.0 ports - microSD card slot - 3.5mm A/V port - 7-segment display - 5V barrel plug power supplyThe PCB provides holes for soldering a UART header or cable, this isconnected to the debug UART0. UART1 is used for the Bluetooth chip,although this isn't working yet.Signed-off-by: Andre Przywara Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20231214015312.17363-4-andre.przywara@arm.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

d3a3d6a3 - arm64: dts: allwinner: h616: Add BigTreeTech Pi support

Tue, 12 Sep 2023 11:20:50 +0000

arm64: dts: allwinner: h616: Add BigTreeTech Pi supportThe BigTreeTech Pi is an H616 based board based on CB1.Just in Rpi format board.It features the same internals as BTT CB1 but adds: - Fan port - IR receiver - ADXL345 Accelerometer connector via SPI - 24V DC power supply via terminal plugs - USB to CAN module connector (External Module)List of currently working things is same as BTT CB1 but also: - IR receiver - ADXL345 connectorSigned-off-by: Martin Botka Reviewed-by: Andre Przywara Acked-by: Jernej Skrabec Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-4-bb11238f3a9c@somainline.orgSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

2e33101f - arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards support

Tue, 12 Sep 2023 11:20:49 +0000

arm64: dts: allwinner: h616: Add BigTreeTech CB1 SoM & boards supportCB1 is Compute Module style board that plugs into Rpi board style adapter orManta 3D printer boards (M4P/M8P).The SoM features: - H616 SoC - 1GiB of RAM - AXP313A PMIC - RTL8189FTV WiFiBoards feature: - 4x USB via USB2 hub (usb1 on SoM). - SDcard slot for loading images. - Ethernet port wired to the internal PHY. (100M) - 2x HDMI 2.0. (Only 1 usable on CB1) - Power and Status LEDs. (Only Status LED usable on CB1) - 40 pin GPIO headerCurrently working: - Booting - USB - UART - MMC - Status LED - WiFi (RTL8189FS via out of tree driver)I didnt want to duplicate things so the manta DTS can also be used on BTT pi4b adapter.CB1 SoM has its own DTSI file in case other boards shows up that accept this SoM.Signed-off-by: Martin Botka Reviewed-by: Andre Przywara Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20230912-b4-cb1-v6-3-bb11238f3a9c@somainline.orgSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

f1b3ddb3 - arm64: dts: allwinner: h616: Add OrangePi Zero 3 board support

Fri, 04 Aug 2023 17:08:56 +0000

arm64: dts: allwinner: h616: Add OrangePi Zero 3 board supportThe OrangePi Zero 3 is a development board based on the Allwinner H618 SoC,which seems to be just an H616 with more L2 cache. The board itself is aslightly updated version of the Orange Pi Zero 2. It features:- Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU- 1/1.5/2/4 GiB LPDDR4 DRAM SKUs (only up to 1GB on the Zero2)- AXP313a PMIC (more capable AXP305 on the Zero2)- Raspberry-Pi-1 compatible GPIO header- extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports- 1 USB 2.0 host port- 1 USB 2.0 type C port (power supply + OTG)- MicroSD slot- on-board 16MiB bootable SPI NOR flash (only 2MB on the Zero2)- 1Gbps Ethernet port (via Motorcomm YT8531 PHY) (RTL8211 on the Zero2)- micro-HDMI port- (yet) unsupported Allwinner WiFi/BT chipAdd the devicetree file describing the currently supported features,namely LEDs, SD card, PMIC, SPI flash, USB. Ethernet seems unstable atthe moment, though the basic functionality works.Signed-off-by: Andre Przywara Reviewed-by: Jernej Skrabec Link: https://lore.kernel.org/r/20230804170856.1237202-4-andre.przywara@arm.comSigned-off-by: Jernej Skrabec List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

2c1e6299 - arm64: dts: allwinner: h616: Add X96 Mate TV box support

Fri, 08 Jul 2022 10:52:35 +0000

arm64: dts: allwinner: h616: Add X96 Mate TV box supportThe X96 Mate is an Allwinner H616 based TV box, featuring: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 2GiB/4GiB RAM (fully usable!) - 16/32/64GiB eMMC - 100Mbps Ethernet (via embedded AC200 EPHY, not yet supported) - Unsupported Allwinner WiFi chip - 2 x USB 2.0 host ports - HDMI port - IR receiver - 5V/2A DC power supply via barrel plugAdd a basic devicetree for it, with SD card and eMMC working, aswell as serial and the essential peripherals, like the AXP PMIC.This DT is somewhat minimal, and should work on many other similar TVboxes with the Allwinner H616 chip.Signed-off-by: Andre Przywara Reviewed-by: Samuel Holland Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220708105235.3983266-8-andre.przywara@arm.com List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

5a378f9f - arm64: dts: allwinner: h616: Add OrangePi Zero 2 board support

Fri, 08 Jul 2022 10:52:34 +0000

arm64: dts: allwinner: h616: Add OrangePi Zero 2 board supportThe OrangePi Zero 2 is a development board with the new H616 SoC. Itcomes with the following features: - Four ARM Cortex-A53 cores, Mali-G31 MP2 GPU - 512MiB/1GiB DDR3 DRAM - AXP305 PMIC - Raspberry-Pi-1 compatible GPIO header - extra 13 pin expansion header, exposing pins for 2x USB 2.0 ports - 1 USB 2.0 host port - 1 USB 2.0 type C port (power supply + OTG) - MicroSD slot - on-board 2MiB bootable SPI NOR flash - 1Gbps Ethernet port (via RTL8211F PHY) - micro-HDMI port - (yet) unsupported Allwinner WiFi/BT chipAdd the devicetree file describing the currently supported features.Signed-off-by: Andre Przywara Acked-by: Samuel Holland Signed-off-by: Jernej Skrabec Link: https://lore.kernel.org/r/20220708105235.3983266-7-andre.przywara@arm.com List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

fa33ec51 - arm64: dts: allwinner: h6: Add Tanix TX6 mini dts

Wed, 01 Dec 2021 18:21:16 +0000

arm64: dts: allwinner: h6: Add Tanix TX6 mini dtsTanix TX6 mini is less capable version of Tanix TX6 although it comeswith some features not present on Tanix TX6.Basic specs:- H6 SoC- 2 GiB DDR3 RAM- HDMI- SPDIF- 2x USB- analogue audio- CVBS- SD card- IR remote- LED display- fast ethernet- XR819 wifi- 16 GiB eMMCCurrently supported features doesn't differ that much from Tanix TX6,but that will change soon.Signed-off-by: Jernej Skrabec Signed-off-by: Maxime Ripard List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

9962cb9b - arm64: dts: allwinner: h5: Add NanoPi R1S H5 support

Sun, 16 May 2021 16:35:22 +0000

arm64: dts: allwinner: h5: Add NanoPi R1S H5 supportThe NanoPi R1S H5 is a open source board made by FriendlyElec.It has the following features:- Allwinner H5, Quad-core Cortex-A53- 512MB DDR3 RAM- 10/100/1000M Ethernet x 2- RTL8189ETV WiFi 802.11b/g/n- USB 2.0 host port (A)- MicroSD Slot- Serial Debug Port- 5V 2A DC power-supplySigned-off-by: Chukun Pan Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20210516163523.9484-2-amadeus@jmu.edu.cn List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

7fa40ca7 - arm64: allwinner: dts: a64: add DT for Early Adopter's PineTab

Thu, 24 Dec 2020 02:40:00 +0000

arm64: allwinner: dts: a64: add DT for Early Adopter's PineTabPineTabs since Early Adopter batch will use a new LCD panel.Add device tree for PineTab with the new panel.Signed-off-by: Icenowy Zheng Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/20201224024001.19248-2-icenowy@aosc.io List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

95c83906 - arm64: allwinner: A100: add support for Allwinner Perf1 board

Fri, 24 Jul 2020 07:21:05 +0000

arm64: allwinner: A100: add support for Allwinner Perf1 boardA100 perf1 is an Allwinner A100-based SBC, with the following features:- 1GiB DDR3 DRAM- AXP803 PMIC- 2 USB 2.0 ports- MicroSD slot and on-board eMMC module- on-board Nand flash- ···Adds initial support for it, including UART and PMU.Signed-off-by: Yangtao Li Signed-off-by: Maxime Ripard Link: https://lore.kernel.org/r/30f4a3fc6ac84d05094e2c3b89d1dddc8ff6b7fc.1595572867.git.frank@allwinnertech.com List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

e53568ca - arm64: dts: allwinner: Add support for PinePhone revision 1.2

Fri, 03 Jul 2020 19:48:41 +0000

arm64: dts: allwinner: Add support for PinePhone revision 1.2Revision 1.2 should be the final production version of the PinePhone.It has most of the known HW quirks fixed.Interrupt to the magnetometer is routed correctly, in this revision.The bulk of the changes are in how modem and the USB-C HDMI bridgechip is powered and where the signals from the modem are connected.Also backlight intensity seemingly behaves differently, than on the1.1 and 1.0 boards, and the PWM duty cycle where backlight startsto work is 10% (as tested on 2 1.2 PinePhones I have access to).Signed-off-by: Ondrej Jirman Link: https://lore.kernel.org/r/20200703194842.111845-3-megous@megous.comSigned-off-by: Maxime Ripard List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile

91f480d4 - arm64: dts: allwinner: Add initial support for Pine64 PinePhone

Thu, 27 Feb 2020 01:26:50 +0000

arm64: dts: allwinner: Add initial support for Pine64 PinePhoneAt the moment PinePhone comes in two slightly incompatible variants:- 1.0: Early Developer Batch- 1.1: Braveheart BatchThere will be at least one more incompatible variant in the very nearfuture, so let's start by sharing the dtsi among multiple variants,right away, even though the HW description doesn't yet include thedifferent bits.The differences between 1.0 and 1.1 are: change in pins that controlthe flash LED, differences in modem power status signal routing, andmaybe some other subtler things, that have not been determined yet.This is a basic DT that includes only features that are alreadysupported by mainline drivers.Co-developed-by: Samuel Holland Signed-off-by: Samuel Holland Co-developed-by: Martijn Braam Signed-off-by: Martijn Braam Co-developed-by: Luca Weiss Signed-off-by: Luca Weiss Signed-off-by: Bhushan Shah Signed-off-by: Icenowy Zheng Signed-off-by: Ondrej Jirman Signed-off-by: Maxime Ripard List of files: /linux-6.15/scripts/dtc/include-prefixes/arm64/allwinner/Makefile