Changes in Kconfig

4f5a5bad - w1: Fix Kconfig indentation

Wed, 20 Nov 2019 13:38:26 +0000

w1: Fix Kconfig indentationAdjust indentation from spaces to tab (+optional two spaces) as incoding style with command like: $ sed -e 's/^ /\t/' -i */KconfigSigned-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20191120133826.12964-1-krzk@kernel.orgSigned-off-by: Krzysztof Kozlowski List of files: /linux-6.15/drivers/w1/slaves/Kconfig

c6bf3842 - w1: new driver. DS2430 chip

Sat, 19 Oct 2019 20:40:15 +0000

w1: new driver. DS2430 chipadd support for ds2430, 1 page, 256bit (32bytes) eeprom(family 0x14).Tests done:32 bytes dump:x@y:~# hexdump -C -n 32 /sys/bus/w1/devices/14-00000158556e/eeprom00000000 39 39 0a 00 00 36 0a ff ff ff ff ff ff ff ff ff00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff0000002034 bytes dump: 32 only displayedx@y:~# hexdump -C -n 34 /sys/bus/w1/devices/14-00000158556e/eeprom00000000 39 39 0a 00 00 36 0a ff ff ff ff ff ff ff ff ff00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff00000020pattern write:x@y:~# echo 123456789 > /sys/bus/w1/devices/14-00000158556e/eepromx@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom00000000 31 32 33 34 35 36 37 38 39 0a ff ff ff ff ff ff00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff00000020specific address 1-byte writex@y:~# dd if=/dev/zero of=/sys/bus/w1/devices/14-00000158556e/eeprom \ count=1 bs=1 seek=41+0 records in1+0 records outx@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom00000000 31 32 33 34 00 36 37 38 39 0a ff ff ff ff ff ff00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff00000020writing binary blockx@y:~# cat dump-128bytes.bin > /sys/bus/w1/devices/14-00000158556e/eepromcat: write error: File too largex@y:~# cat dump-32bytes.bin > /sys/bus/w1/devices/14-00000158556e/eepromx@y:~# hexdump -C -n 54 /sys/bus/w1/devices/14-00000158556e/eeprom00000000 10 0b 5b ff ff ff ff ff ff ff ff ff ff ff ff ff00000010 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff 4000000020Signed-off-by: Angelo Dureghello Link: https://lore.kernel.org/r/20191019204015.61474-1-angelo.dureghello@timesys.comSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

b058b255 - w1: ds250x: Fix build error without CRC16

Fri, 20 Sep 2019 06:03:18 +0000

w1: ds250x: Fix build error without CRC16If CRC16 is not set, building will fails:drivers/w1/slaves/w1_ds250x.o: In function `w1_ds2505_read_page':w1_ds250x.c:(.text+0x82f): undefined reference to `crc16'w1_ds250x.c:(.text+0x90a): undefined reference to `crc16'w1_ds250x.c:(.text+0x91a): undefined reference to `crc16'Reported-by: Hulk Robot Fixes: 25ec8710d9c2 ("w1: add DS2501, DS2502, DS2505 EPROM device driver")Signed-off-by: YueHaibing Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20190920060318.35020-1-yuehaibing@huawei.comSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

25ec8710 - w1: add DS2501, DS2502, DS2505 EPROM device driver

Sat, 31 Aug 2019 08:26:22 +0000

w1: add DS2501, DS2502, DS2505 EPROM device driverAdd a 1-Wire slave driver to support DS250x EPROM deivces. Thisslave driver attaches the devices to the NVMEM subsystem foran easy in-kernel usage.Signed-off-by: Thomas Bogendoerfer Link: https://lore.kernel.org/r/20190831082623.15627-3-tbogendoerfer@suse.deSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

bf497355 - power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companion

Fri, 06 Jul 2018 05:35:51 +0000

power: supply: ds2760_battery: merge ds2760 supply driver with its w1 slave companionThis patch removes the w1 slave driver that used to register the w1 familyand instanciate a platform device at runtime. The code now lives in thesupply driver instead to avoid that level of indirection.The old device name "ds2760-battery.0" is preserved, so userspaceapplications can access the same virtual device nodes as before.Note that because the w1 core does not currently have a framework forsuspend/resume, the driver now registers a PM notifier callback.Signed-off-by: Daniel Mack Signed-off-by: Sebastian Reichel List of files: /linux-6.15/drivers/w1/slaves/Kconfig

ebc4768a - add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridge

Wed, 20 Sep 2017 21:52:46 +0000

add w1_ds28e17 driver for the DS28E17 Onewire to I2C master bridgeThis subpatch adds a driver for the DS28E17 Onewire to I2C master bridge.Signed-off-by: Jan Kandziora Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

f6887531 - drivers: w1: Add 1w slave driver for DS28E05 EEPROM

Sun, 27 Aug 2017 11:34:23 +0000

drivers: w1: Add 1w slave driver for DS28E05 EEPROMAdd a one wire driver for the DS28E05 one wire slave chip. This chiprequires OverDrive support to talk to it.Signed-off-by: Andrew Worsley Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

55a9db67 - power: supply: move HDQ interface for bq27xxx from w1 to power/supply

Wed, 19 Jul 2017 17:04:06 +0000

power: supply: move HDQ interface for bq27xxx from w1 to power/supplyThe HDQ interface driver should be in this folder just like the I2Cinterface driver. Move this driver out of drivers/w1/slave and intodrivers/power/supply.Signed-off-by: Andrew F. Davis Acked-by: Pali Rohár Signed-off-by: Sebastian Reichel List of files: /linux-6.15/drivers/w1/slaves/Kconfig

e3af95e6 - w1: add support for DS2438 Smart Battery Monitor

Thu, 23 Feb 2017 06:38:43 +0000

w1: add support for DS2438 Smart Battery MonitorDetailed information about support and provided sysfs filesin my next commit which creates a documentation file:Documentation/w1/slaves/w1_ds2438Signed-off-by: Mariusz Bialonczyk Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

dd6478d6 - w1: add DS2405 addressable switch driver

Thu, 19 Jan 2017 20:26:51 +0000

w1: add DS2405 addressable switch driverThis adds a driver for a DS2405 1-wire single-channel addressable switch.The DS2405 can also work as a single-channel binary remote sensor.This driver supports two attributes: "state" and "output" which are thesame attribute names as supported by existing DS2406, DS2408 and DS2413drivers.Signed-off-by: Maciej S. Szmigiero Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

6b5fa776 - w1: select crc16 library for ds2406

Mon, 23 Jun 2014 14:31:47 +0000

w1: select crc16 library for ds2406commit 94859308a21b "w1: new w1_ds2406 driver" added a new driverthat uses the crc16 library, but didn't ensure that the core isthere. This adds the necessary Kconfig statements, just like wehave it for other w1 drivers.Reported-by: kbuild test robot Signed-off-by: Arnd Bergmann Acked-by: Scott Alfter Cc: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

94859308 - w1: new w1_ds2406 driver

Tue, 17 Jun 2014 20:42:05 +0000

w1: new w1_ds2406 driverSome preliminary work at making use of this driver led me to implementCRC-16 checks on read and write to deal with the occasional glitchiness ofthe 1-Wire bus. The revised driver (attached) returns an I/O error if theCRC check fails. When reading the chip's state, either you get a validindication or you get an I/O error. When changing its state, either thechange is successful or an I/O error is returned.Signed-off-by: Scott Alfter Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

adffe4ab - w1: Remove excess dependencies on W1 for masters and slaves

Sat, 22 Feb 2014 07:29:48 +0000

w1: Remove excess dependencies on W1 for masters and slavesConfiguration for masters and slaves is included only if W1 symbolenabled, so no reason to check it once more.Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

aceca285 - w1: ds2408: make value read-back check a Kconfig option

Fri, 15 Mar 2013 18:20:25 +0000

w1: ds2408: make value read-back check a Kconfig optionDe-activating this reading back will effectively half the time requiredfor a write to the output register.Acked-by: Evgeniy Polyakov Signed-off-by: Jean-Francois Dagenais Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

31b4ca3e - w1: add support for DS2413 Dual Channel Addressable Switch

Thu, 28 Feb 2013 01:05:47 +0000

w1: add support for DS2413 Dual Channel Addressable SwitchAlso fixes some whitespace inconsistency in Kconfig and w1_family.h whenDS2408 chip support was added.Signed-off-by: Mariusz Bialonczyk Acked-by: Evgeniy Polyakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/w1/slaves/Kconfig

fbf7f7b4 - w1: Add 1-wire slave device driver for DS28E04-100

Fri, 25 May 2012 22:45:12 +0000

w1: Add 1-wire slave device driver for DS28E04-100Signed-off-by: Markus Franke Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

c0a67209 - Revert "w1: Add 1-wire slave device driver for DS28E04-100"

Mon, 30 Apr 2012 02:12:08 +0000

Revert "w1: Add 1-wire slave device driver for DS28E04-100"This reverts commit f19420c1acb0b573c88a12deb2d42035e22d4a17.It contained lots of errors and warnings and shouldn't have ever beenapplied, that was my fault, sorry.Cc: Markus Franke Cc: Evgeniy Polyakov ,Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

f19420c1 - w1: Add 1-wire slave device driver for DS28E04-100

Wed, 11 Apr 2012 22:40:30 +0000

w1: Add 1-wire slave device driver for DS28E04-100This patch adds a 1-wire slave device driver for the DS28E04-100.Signed-off-by: Markus Franke Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig

fef37e9a - DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave drivers

Wed, 29 Feb 2012 13:58:53 +0000

DS2781 Maxim Stand-Alone Fuel Gauge battery and w1 slave driversSigned-off-by: Renata Sayakhova Acked-by: Evgeniy Polyakov Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/w1/slaves/Kconfig