Changes in Makefile

ab5043ef - usb: phy: remove phy-isp1301-omap driver

Wed, 23 Nov 2022 21:25:03 +0000

usb: phy: remove phy-isp1301-omap driverWith the H2 and H3 board support removed from the driver, thereare actually no other users, so the entire driver can go away.Link: https://lore.kernel.org/linux-arm-kernel/20221019173437.GB41568@darkstar.musicnaut.iki.fi/Suggested-by: Aaro Koskinen Signed-off-by: Arnd Bergmann List of files: /linux-6.15/drivers/usb/phy/Makefile

3f2d1f2e - usb: phy: jz4770: Remove driver

Wed, 26 Oct 2022 18:26:57 +0000

usb: phy: jz4770: Remove driverThis driver has been replaced by the Ingenic PHY driver that uses thegeneric PHY framework.Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20221026182657.146630-8-paul@crapouillou.netSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

541368b4 - usb: phy: Add driver for the Ingenic JZ4770 USB transceiver

Sat, 29 Feb 2020 16:18:20 +0000

usb: phy: Add driver for the Ingenic JZ4770 USB transceiverAdd a driver to support the USB PHY found in the JZ4770 SoC fromIngenic.Signed-off-by: Paul Cercueil Link: https://lore.kernel.org/r/20200229161820.17824-2-paul@crapouillou.netSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

e10d3fc5 - usb: phy: Add Kconfig entry for Tegra PHY driver

Mon, 09 Apr 2018 22:02:59 +0000

usb: phy: Add Kconfig entry for Tegra PHY driverTegra's EHCI driver has a build dependency on Tegra's PHY driver andcurrently Tegra's PHY driver is built only when Tegra's EHCI driver isbuilt. Add own Kconfig entry for the Tegra's PHY driver so that driversother than ehci-tegra (like ChipIdea UDC) could work with ehci-tegradriver being disabled in kernels config by allowing user to manuallyselect the PHY driver.Signed-off-by: Dmitry Osipenko Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

ee30ec0c - usb: phy: Add Kconfig entry for Tegra PHY driver

Mon, 09 Apr 2018 22:02:59 +0000

usb: phy: Add Kconfig entry for Tegra PHY driverTegra's EHCI driver has a build dependency on Tegra's PHY driver andcurrently Tegra's PHY driver is built only when Tegra's EHCI driver isbuilt. Add own Kconfig entry for the Tegra's PHY driver so that driversother than ehci-tegra (like ChipIdea UDC) could work with ehci-tegradriver being disabled in kernels config by allowing user to manuallyselect the PHY driver.Signed-off-by: Dmitry Osipenko Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

4756f35f - usb: phy: remove phy-qcom-8x16-usb.c

Tue, 31 Oct 2017 13:11:31 +0000

usb: phy: remove phy-qcom-8x16-usb.cNo Qualcomm SoC requires the "phy-qcom-8x16-usb.c" USB phy driversupport any more, so remove the code.Suggested-by: Stephen Boyd Signed-off-by: Alex Elder Acked-by: Bjorn Andersson Acked-by: Andy Gross Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

a170a1e9 - usb: phy: remove phy-msm-usb.c

Tue, 31 Oct 2017 13:11:30 +0000

usb: phy: remove phy-msm-usb.cNo Qualcomm SoC requires the "phy-msm-usb.c" USB phy driver supportany more, so remove the code.Suggested-by: Stephen Boyd Signed-off-by: Alex Elder Acked-by: Bjorn Andersson Acked-by: Andy Gross Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

20839dbb - usb: phy: Remove unused config

Thu, 23 Mar 2017 06:08:31 +0000

usb: phy: Remove unused configSince the old common Samsung USB PHY code has been removed by commit ea2fdf8423("usb: phy: samsung: remove old common USB PHY code"), thus remove the unusedconfig.Signed-off-by: Baolin Wang Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

96cfcc9c - usb: phy: Remove unused config

Thu, 23 Mar 2017 06:08:31 +0000

usb: phy: Remove unused configSince the old common Samsung USB PHY code has been removed by commit ea2fdf8423("usb: phy: samsung: remove old common USB PHY code"), thus remove the unusedconfig.Signed-off-by: Baolin Wang Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

375da627 - usb: phy: Remove unused Renesas R-Car (Gen1) USB PHY driver

Fri, 04 Dec 2015 16:04:25 +0000

usb: phy: Remove unused Renesas R-Car (Gen1) USB PHY driverAs of commit 3d7608e4c169af03 ("ARM: shmobile: bockw: remove legacyboard file and config"), the Renesas R-Car (Gen1) USB PHY driver is nolonger used.In theory it could still be used on R-Car Gen1 SoCs, but that wouldrequire adding DT support to the driver. Instead, a new driver using thegeneric PHY framework should be written, as was done for R-Car Gen2.Remove the driver for good.Acked-by: Simon Horman Signed-off-by: Geert Uytterhoeven Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

35116993 - usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driver

Wed, 08 Jul 2015 14:57:40 +0000

usb: phy: qcom: New APQ8016/MSM8916 USB transceiver driverDriver handles PHY initialization, clock management, powermanagement and workarounds required after resetting the hardware.Signed-off-by: Ivan T. Ivanov Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

34ef33f7 - usb: phy: Remove the phy-rcar-gen2-usb driver

Tue, 28 Apr 2015 12:04:07 +0000

usb: phy: Remove the phy-rcar-gen2-usb driverThe phy-rcar-gen2-usb driver, which supports legacy platform data only,is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager:Remove legacy board support").This driver was superseded by the DT-only phy-rcar-gen2 driver, whichwas introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHYdriver").Signed-off-by: Geert Uytterhoeven Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

b189a211 - usb: phy: Remove the phy-rcar-gen2-usb driver

Tue, 28 Apr 2015 12:04:07 +0000

usb: phy: Remove the phy-rcar-gen2-usb driverThe phy-rcar-gen2-usb driver, which supports legacy platform data only,is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager:Remove legacy board support").This driver was superseded by the DT-only phy-rcar-gen2 driver, whichwas introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHYdriver").Signed-off-by: Geert Uytterhoeven Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

1c3c0528 - usb: phy: samsung: remove old USB 3.0 PHY driver

Fri, 22 Aug 2014 16:59:04 +0000

usb: phy: samsung: remove old USB 3.0 PHY driverdrivers/usb/phy/phy-samsung-usb3 driver got replaced bydrivers/phy/phy-samsung-usb3 one and is no longer used.Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Reviewed-by: Vivek Gautam Reviewed-by: Jingoo Han Acked-by: Kishon Vijay Abraham I Cc: Kamil Debski Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

a8b5b12e - usb: phy: samsung: remove old USB 2.0 PHY driver

Fri, 22 Aug 2014 16:59:03 +0000

usb: phy: samsung: remove old USB 2.0 PHY driverdrivers/usb/phy/phy-samsung-usb2 driver got replaced bydrivers/phy/phy-samsung-usb2 one and is no longer used.Signed-off-by: Bartlomiej Zolnierkiewicz Acked-by: Kyungmin Park Reviewed-by: Vivek Gautam Reviewed-by: Jingoo Han Acked-by: Kishon Vijay Abraham I Cc: Kamil Debski Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

1dfa91aa - usb: common: rename phy-fsm-usb.c to usb-otg-fsm.c

Tue, 29 Apr 2014 00:35:59 +0000

usb: common: rename phy-fsm-usb.c to usb-otg-fsm.cSince usb otg fsm implementation is not related to usb phy.We move it from usb/phy/ to usb/common/, and rename it toreflect its real meaning.Cc: Felipe Balbi Signed-off-by: Peter Chen Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

543cab64 - usb: phy: mv_u3d: Remove usb phy driver for mv_u3d

Tue, 15 Apr 2014 11:36:23 +0000

usb: phy: mv_u3d: Remove usb phy driver for mv_u3dThe usb phy driver for mv_u3d got added in v3.7 through commita67e76ac904c ("usb: phy: mv_u3d: Add usb phy driver for mv_u3d"). Itthen depended on USB_MV_U3D. And that symbol dependedon CPU_MMP3 at that time. But CPU_MMP3 has never been part of the tree.This means that this drive was unbuildable when it was added.In commit 60630c2eabd4 ("usb: gadget: mv_u3d: drop ARCH dependency")MV_U3D_PHY was made depended directly on CPU_MMP3. That kept itunbuildable, of course.Remove this driver. It can be re-added once its dependencies are part ofthe tree.Signed-off-by: Paul Bolle Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/usb/phy/Makefile

14da699b - phy: rename struct omap_control_usb to struct omap_control_phy

Thu, 06 Mar 2014 14:38:37 +0000

phy: rename struct omap_control_usb to struct omap_control_phyRename struct omap_control_usb to struct omap_control_phy since it canbe used to control PHY of USB, SATA and PCIE. Also move the driver andinclude files under *phy* and made the corresponding changes in the usersof phy-omap-control.Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Roger Quadros Acked-by: Felipe Balbi List of files: /linux-6.15/drivers/usb/phy/Makefile

a70143bb - drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework

Mon, 03 Mar 2014 11:38:12 +0000

drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY FrameworkAdapted omap-usb3 PHY driver to Generic PHY Framework and moved phy-omap-usb3driver in drivers/usb/phy to drivers/phy and also renamed the file tophy-ti-pipe3 since this same driver will be used for SATA PHY andPCIE PHY.Signed-off-by: Kishon Vijay Abraham I List of files: /linux-6.15/drivers/usb/phy/Makefile