Changes in Makefile

cf890fe8 - iio:adc:ad7280a: Move out of staging

Sun, 06 Feb 2022 19:03:28 +0000

iio:adc:ad7280a: Move out of stagingThis is a rather unusual device (in IIO anyway). However, it hasa near to standard userspace ABI.Note the work to move this out of staging was done against a minimalQEMU model, which doesn't model all the features of the device.I have no intention to upstream the QEMU model as it was developedjust to enable this driver cleanup.https://github.com/jic23/qemu/tree/ad7280a-hacksSigned-off-by: Jonathan Cameron Reviewed-by: Marcelo Schmitt Link: https://lore.kernel.org/r/20220206190328.333093-21-jic23@kernel.org List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

b581f748 - staging: iio: adc: ad7192: move out of staging

Wed, 12 Feb 2020 16:17:21 +0000

staging: iio: adc: ad7192: move out of stagingMove ad7192 ADC driver out of staging into mainline.Signed-off-by: Alexandru Tachici Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

9fb27f80 - staging: iio: ad7780: moving ad7780 out of staging

Sat, 16 Mar 2019 02:15:55 +0000

staging: iio: ad7780: moving ad7780 out of stagingMove ad7780 ADC driver out of staging and into the mainline.The ad7780 is a sigma-delta analog to digital converter. This driver providesreading voltage values and status bits from both the ad778x and ad717x series.Its interface also allows writing on the FILTER and GAIN GPIO pins on thead778x.Signed-off-by: Renato Lui Geh Signed-off-by: Giuliano Belinassi Co-developed-by: Giuliano Belinassi Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

2985a5d8 - staging: iio: adc: ad7606: Move out of staging

Mon, 17 Dec 2018 12:23:39 +0000

staging: iio: adc: ad7606: Move out of stagingMove ad7606 ADC driver out of staging and into the mainline.Signed-off-by: Stefan Popa Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

0097e20e - staging:iio:adc:lpc32xx Move out of staging.

Sun, 05 Feb 2017 13:07:00 +0000

staging:iio:adc:lpc32xx Move out of staging.There are a few more little cleanups that could be done on this driver, butI don't think any are sufficient to justify not moving it out of staging.It's a very simple driver (presumably for a simple part) so not much that cango wrong. I think it was only ever in staging because that's where IIO wasas a whole at the time and then we forgot about it!Signed-off-by: Jonathan Cameron Cc: Roland Stigge Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

af8f651b - staging:iio:adc:spear Move out of staging.

Sun, 05 Feb 2017 12:34:00 +0000

staging:iio:adc:spear Move out of staging.There are some unanswered questions due to disagreements between the codeand various datasheets (including between different datasheets for the samepart).I don't think that is necessarily a reason to keep it in staging however.I'm partly posting this patch inorder to reignite debate and with a bitof luck find someone who has one of these to test!Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

fa23105f - staging:iio:ad7606: Move buffer code to main source file

Wed, 19 Oct 2016 17:07:08 +0000

staging:iio:ad7606: Move buffer code to main source fileCurrently the ad7606 buffer handling code resides in its own source file.But this file contains only 4 small functions of which half are justwrappers around other functions. Buffer support is also always enabled forthis driver, so move them over to the main source file. This reduces theamount of boilerplate code.Also rename the main function from ad7606_core.c to ad7606.c since there isonly a single file now.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

f836c459 - iio: adc: Move mxs-lradc out of staging

Sat, 06 Feb 2016 22:23:23 +0000

iio: adc: Move mxs-lradc out of stagingMove mxs-lradc driver from drivers/staging/iio/adc to drivers/iio/adc.Signed-off-by: Ksenija Stanojevic Acked-by: Greg Kroah-Hartman Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

0046a46a - staging/ad7606: Actually build the interface modules

Tue, 27 Oct 2015 14:24:55 +0000

staging/ad7606: Actually build the interface modulesThe ad7606_par and ad7606_spi drivers are not built if CONFIG_AD7606=m,because kbuild does not currently support -m syntax. Even if weadd kbuild support, ad7606 fails to link, because of duplicatemodule_init definitions. Make the two drivers separate modules, as theKconfig help text already suggests.Also, CONFIG_IIO_BUFFER is a dependency of CONFIG_AD7606, so there is noneed to test for it in the Makefile.Signed-off-by: Michal Marek List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

3b1cae7c - staging:iio:ad7291: Move out of staging

Mon, 30 Jun 2014 08:50:00 +0000

staging:iio:ad7291: Move out of stagingThe ad7291 driver is in a reasonable shape. It does not use non-standard API/ABIand there are no major style issues with the driver. So this patch moves it outof staging.There is one small warning from checkpatch which is also fixed in this patch.The patch also sorts the #include directives in alphabetical order.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

bd75afaa - staging:iio: Move ad799x driver out of staging

Fri, 03 Oct 2014 09:31:00 +0000

staging:iio: Move ad799x driver out of stagingThe driver is now at a reasonable quality level. Move it out of staging.Signed-off-by: Lars-Peter Clausen Acked-by: Hartmut Knaack Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

396590b3 - staging:iio:ad799x: Move ring functions to the main file

Fri, 03 Oct 2014 09:31:00 +0000

staging:iio:ad799x: Move ring functions to the main fileThe ad799x_ring.c file is pretty much only one function these days. No need tokeep it in a separate file. Since there is then only one user of the header leftalso move everything from the header to the main file.Signed-off-by: Lars-Peter Clausen Acked-by: Hartmut Knaack Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

cddc1424 - staging:iio: Remove adt7410 driver

Mon, 18 Feb 2013 13:38:00 +0000

staging:iio: Remove adt7410 driverThe adt7410 hwmon driver is feature wise more or less on par with the IIOdriver. So we can finally remove the IIO driver.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

f87f1a23 - staging:iio: Move ad7793 driver out of staging

Wed, 21 Nov 2012 16:27:00 +0000

staging:iio: Move ad7793 driver out of stagingThe driver does not expose any custom API to userspace and none of the standardstatic code checker tools report any issues, so move it out of staging.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

709ab36e - staging:iio: Move the ad7298 driver out of staging

Sat, 17 Nov 2012 11:42:59 +0000

staging:iio: Move the ad7298 driver out of stagingThe driver does not expose any custom API to userspace and none of the standardstatic code checker tools report any issues, so move it out of staging.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

dc4871ad - staging:iio:ad7298: Squash everything into one file

Thu, 15 Nov 2012 13:15:00 +0000

staging:iio:ad7298: Squash everything into one fileThe recent cleanups have decimated the drivers code size by quite a bit. It isonly a few hundred lines in total now. Putting everything into one file alsoallows to reduce the code size a bit more by removing a few lines of boilerplatecode. The only functional change made by this patch is that we now alwaysinclude buffer support, instead of making it optional. This is more consistentwith what we do for other drivers.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

168c9d95 - iio:adc:max1363 move from staging.

Sat, 06 Oct 2012 13:42:27 +0000

iio:adc:max1363 move from staging.Now this driver is using kfifo we can move it out of staging.Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

b3bcbfcf - staging:iio:adc:max1363 consolidate files.

Sat, 06 Oct 2012 13:10:05 +0000

staging:iio:adc:max1363 consolidate files.For a long while now the max1363 core has selected thebuffer anyway. For a while I meant to make the separationwork again, but given how long it has been it is probablytime to conclude it will never happen and settle for tidyingup what we have.Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile

4eb3ccf1 - staging:iio: Move the ad7887 driver out of staging

Mon, 05 Nov 2012 09:56:00 +0000

staging:iio: Move the ad7887 driver out of stagingThe driver does not expose any custom API to userspace and none of the standardstatic code checker tools report any issues, so move it out of staging.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/staging/iio/adc/Makefile