Changes in sim710.c

886eb6d5 - scsi: sim710: Remove unused variable 'err' from sim710_init()

Wed, 17 Mar 2021 09:11:22 +0000

scsi: sim710: Remove unused variable 'err' from sim710_init()Take the opportunity to rework the comment a little.Fixes the following W=1 kernel build warning(s): drivers/scsi/sim710.c: In function ‘sim710_init’: drivers/scsi/sim710.c:216:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable]Link: https://lore.kernel.org/r/20210317091125.2910058-6-lee.jones@linaro.orgCc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Richard Hirst Cc: c by Cc: linux-scsi@vger.kernel.orgSigned-off-by: Lee Jones Signed-off-by: Martin K. Petersen List of files: /linux-6.15/drivers/scsi/sim710.c

74ba9207 - treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

Mon, 20 May 2019 07:19:02 +0000

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 675 mass ave cambridge ma 02139 usaextracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-laterhas been chosen to replace the boilerplate/reference in 441 file(s).Signed-off-by: Thomas Gleixner Reviewed-by: Michael Ellerman (powerpc)Reviewed-by: Richard Fontana Reviewed-by: Allison Randal Reviewed-by: Kate Stewart Cc: linux-spdx@vger.kernel.orgLink: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.deSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/scsi/sim710.c

648a0a7d - scsi: sim710: fix build warning

Thu, 11 Feb 2016 04:59:03 +0000

scsi: sim710: fix build warningWe are getting build warning about: "Section mismatch in reference from the variable sim710_eisa_driver to the function .init.text:sim710_eisa_probe() The variable sim710_eisa_driver references the function __init sim710_eisa_probe()"sim710_eisa_probe() was having __init but that was being referenced fromsim710_eisa_driver.Signed-off-by: Sudip Mukherjee Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen List of files: /linux-6.15/drivers/scsi/sim710.c

6f039790 - Drivers: scsi: remove __dev* attributes.

Fri, 21 Dec 2012 21:08:55 +0000

Drivers: scsi: remove __dev* attributes.CONFIG_HOTPLUG is going away as an option. As a result, the __dev*markings need to be removed.This change removes the use of __devinit, __devexit_p, __devinitdata,__devinitconst, and __devexit from these drivers.Based on patches originally written by Bill Pemberton, but redone by mein order to handle some of the coding style issues better, by hand.Cc: Bill Pemberton Cc: Adam Radford Cc: "James E.J. Bottomley" Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/scsi/sim710.c

a88dc06c - scsi: delete the MCA specific drivers and driver code

Thu, 17 May 2012 00:33:52 +0000

scsi: delete the MCA specific drivers and driver codeThe support for CONFIG_MCA is being removed, since the 20year old hardware simply isn't capable of meeting today'ssoftware demands on CPU and memory resources.This commit removes the MCA specific SCSI drivers, and theMCA specific portions of code in dual role ISA/MCA drivers.Also, the MCA specific SCSI documentation is removed.Cc: James Bottomley Cc: linux-scsi@vger.kernel.orgSigned-off-by: Paul Gortmaker List of files: /linux-6.15/drivers/scsi/sim710.c

5a0e3ad6 - include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

Wed, 24 Mar 2010 08:04:11 +0000

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.hpercpu.h is included by sched.h and module.h and thus ends up beingincluded when building most .c files. percpu.h includes slab.h whichin turn includes gfp.h making everything defined by the two filesuniversally available and complicating inclusion dependencies.percpu.h -> slab.h dependency is about to be removed. Prepare forthis change by updating users of gfp and slab facilities include thoseheaders directly instead of assuming availability. As this conversionneeds to touch large number of source files, the following script isused as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.pyThe script does the followings.* Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h.* When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order.* If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file.The conversion was done in the following steps.1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files.2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files.3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind.4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually.5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary.6. percpu.h was updated not to include slab.h.7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point.Given the fact that I had only a couple of failures from tests on step6, I'm fairly confident about the coverage of this conversion patch.If there is a breakage, it's likely to be something in one of the archheaders which should be easily discoverable easily on most builds ofthe specific arch.Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn List of files: /linux-6.15/drivers/scsi/sim710.c

71610f55 - [SCSI] struct device - replace bus_id with dev_name(), dev_set_name()

Wed, 03 Dec 2008 21:41:36 +0000

[SCSI] struct device - replace bus_id with dev_name(), dev_set_name()[jejb: limit ioctl to returning 20 characters to avoid overrun on long device names and add a few more conversions]Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman Signed-off-by: James Bottomley List of files: /linux-6.15/drivers/scsi/sim710.c

dd00cc48 - some kmalloc/memset ->kzalloc (tree wide)

Thu, 19 Jul 2007 08:49:03 +0000

some kmalloc/memset ->kzalloc (tree wide)Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc).Here is a short excerpt of the semantic patch performingthis transformation:@@type T2;expression x;identifier f,fld;expression E;expression E1,E2;expression e1,e2,e3,y;statement S;@@ x =- kmalloc+ kzalloc (E1,E2) ... when != $x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S$- memset((T2)x,0,E1);@@expression E1,E2,E3;@@- kzalloc(E1 * E2,E3)+ kcalloc(E1,E2,E3)[akpm@linux-foundation.org: get kcalloc args the right way around]Signed-off-by: Yoann Padioleau Cc: Richard Henderson Cc: Ivan Kokshaysky Acked-by: Russell King Cc: Bryan Wu Acked-by: Jiri Slaby Cc: Dave Airlie Acked-by: Roland Dreier Cc: Jiri Kosina Acked-by: Dmitry Torokhov Cc: Benjamin Herrenschmidt Acked-by: Mauro Carvalho Chehab Acked-by: Pierre Ossman Cc: Jeff Garzik Cc: "David S. Miller" Acked-by: Greg KH Cc: James Bottomley Cc: "Antonino A. Daplas" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/scsi/sim710.c

3ac709c1 - [SCSI] a4000t, zorro7xx, mvme16x, bvme6000,sim710: xxx_device_remove seems buggy

Tue, 17 Jul 2007 19:38:03 +0000

[SCSI] a4000t, zorro7xx, mvme16x, bvme6000,sim710: xxx_device_remove seems buggyFix drivers misusing dev_to_shostSome drivers were using dev_to_shost to go from a struct device to thecorresponding shost. Unfortunately, dev_to_shost only looks up the treeto find an shost (it's designed to go from a scsi_device or ascsi_target to the parent scsi_host), and these drivers were calling itwith the parent of the scsi_host.I've fixed this by saving a pointer to the Scsi_Host in the drvdata,which matches what most scsi drivers do.Signed-off-by: Matthew Wilcox Cc: Geert Uytterhoeven Signed-off-by: James Bottomley List of files: /linux-6.15/drivers/scsi/sim710.c

f67a9c15 - [SCSI] 53c700: Allow setting burst length

Mon, 25 Dec 2006 20:30:08 +0000

[SCSI] 53c700: Allow setting burst lengthThis is a patch, which allows not only disabling bursting but to specifydifferent burst lenghts. This feature is needed to get the 53c700 driverworking for the onboard SCSI controller of SNI RM machines, which onlywork reliably with a 4 word burst length.Signed-off-by: James Bottomley List of files: /linux-6.15/drivers/scsi/sim710.c

07563c71 - [PATCH] EISA bus MODALIAS attributes support

Wed, 27 Sep 2006 08:50:56 +0000

[PATCH] EISA bus MODALIAS attributes supportAdd modalias attribute support for the almost forgotten now EISA bus and(at least some) EISA-aware modules.The modalias entry looks like (for an 3c509 NIC): eisa:sTCM5093and the in-module alias like: eisa:sTCM5093*The patch moves struct eisa_device_id declaration from include/linux/eisa.hto include/linux/mod_devicetable.h (so that the former now #includes thelatter), adds proper MODULE_DEVICE_TABLE(eisa, ...) statements for alldrivers with EISA IDs I found (some drivers already have that DEVICE_TABLEdeclared), and adds recognision of __mod_eisa_device_table toscripts/mod/file2alias.c so that proper modules.alias will be generated.There's no support for /lib/modules/$kver/modules.eisamap, as it's not usedby any existing tools, and because with in-kernel modalias mechanism thosemaps are obsolete anyway.The rationale for this patch is: a) to make EISA bus to act as other busses with modalias support, to unify driver loading b) to foget about EISA finally - with this patch, kernel (who still supports EISA) will be the only one who knows how to choose the necessary drivers for this bus ;)[akpm@osdl.org: fix the kbuild bit]Signed-off-by: Michael Tokarev Cc: Rusty Russell Cc: Randy Dunlap Acked-the-net-bits-by: Jeff Garzik Acked-the-tulip-bit-by: Valerie Henson Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/scsi/sim710.c

1d6f359a - [PATCH] irq-flags: scsi: Use the new IRQF_ constants

Sun, 02 Jul 2006 02:29:42 +0000

[PATCH] irq-flags: scsi: Use the new IRQF_ constantsSigned-off-by: Thomas Gleixner Cc: Ingo Molnar Cc: "David S. Miller" Cc: Benjamin Herrenschmidt Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/scsi/sim710.c

6ab3d562 - Remove obsolete #include

Fri, 30 Jun 2006 17:25:36 +0000

Remove obsolete #include Signed-off-by: Jörn Engel Signed-off-by: Adrian Bunk List of files: /linux-6.15/drivers/scsi/sim710.c

1a34456b - [SCSI] Overrun in drivers/scsi/sim710.c

Wed, 19 Apr 2006 04:09:20 +0000

[SCSI] Overrun in drivers/scsi/sim710.cThis fixes coverity bug id #480. Since id_array is declared asid_array[MAX_SLOTS], the check for i>MAX_SLOTS is obviously false.Signed-off-by: Eric Sesterhenn Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: James Bottomley List of files: /linux-6.15/drivers/scsi/sim710.c

a1d4f73a - [SCSI] sim710: fix a NULL pointer dereference

Fri, 10 Mar 2006 22:25:00 +0000

[SCSI] sim710: fix a NULL pointer dereferenceThis patch fixes a NULL pointer dereference spotted by the Coveritychecker.Signed-off-by: Adrian Bunk Signed-off-by: James Bottomley List of files: /linux-6.15/drivers/scsi/sim710.c

56fece20 - [PATCH] finally fix 53c700 to use the generic iomem infrastructure

Sun, 03 Apr 2005 09:57:48 +0000

[PATCH] finally fix 53c700 to use the generic iomem infrastructureThis driver has had it's own different infrastructure for doing this forages, but it's time it used the common one.Signed-off-by: James Bottomley List of files: /linux-6.15/drivers/scsi/sim710.c

1da177e4 - Linux-2.6.12-rc2

Sat, 16 Apr 2005 22:20:36 +0000

Linux-2.6.12-rc2Initial git repository build. I'm not bothering with the full history,even though we have it. We can create a separate "historical" gitarchive of that later if we want to, and in the meantime it's about3.2GB when imported into git - space that would just make the earlygit days unnecessarily complicated, when we don't have a lot of goodinfrastructure for it.Let it rip! List of files: /linux-6.15/drivers/scsi/sim710.c