Changes in Makefile

f7e322d9 - pinctrl: bcm: add driver for BCM4908 pinmux

Mon, 24 Jan 2022 10:22:43 +0000

pinctrl: bcm: add driver for BCM4908 pinmuxBCM4908 has its own pins layout so it needs a custom binding and a Linuxdriver.Signed-off-by: Rafał Miłecki Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20220124102243.14912-2-zajec5@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

d28039fc - pinctrl: add a pincontrol driver for BCM6318

Wed, 24 Mar 2021 08:19:23 +0000

pinctrl: add a pincontrol driver for BCM6318Add a pincontrol driver for BCM6318. BCM6318 allows muxing most GPIOsto different functions. BCM6318 is similar to BCM6328 with the additionof a pad register, and the GPIO meaning of the mux register changesbased on the GPIO number.Co-developed-by: Jonas Gorski Signed-off-by: Jonas Gorski Signed-off-by: Álvaro Fernández Rojas Link: https://lore.kernel.org/r/20210324081923.20379-23-noltari@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

155cca1b - pinctrl: add a pincontrol driver for BCM63268

Wed, 24 Mar 2021 08:19:20 +0000

pinctrl: add a pincontrol driver for BCM63268Add a pincontrol driver for BCM63268. BCM63268 allows muxing GPIOsto different functions. Depending on the mux, these are either singlepin configurations or whole pin groups.Co-developed-by: Jonas Gorski Signed-off-by: Jonas Gorski Signed-off-by: Álvaro Fernández Rojas Link: https://lore.kernel.org/r/20210324081923.20379-20-noltari@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

50554acc - pinctrl: add a pincontrol driver for BCM6368

Wed, 24 Mar 2021 08:19:17 +0000

pinctrl: add a pincontrol driver for BCM6368Add a pincontrol driver for BCM6368. BCM6368 allows muxing the first 32GPIOs onto alternative functions. Not all are documented.Co-developed-by: Jonas Gorski Signed-off-by: Jonas Gorski Signed-off-by: Álvaro Fernández Rojas Link: https://lore.kernel.org/r/20210324081923.20379-17-noltari@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

705791e2 - pinctrl: add a pincontrol driver for BCM6362

Wed, 24 Mar 2021 08:19:14 +0000

pinctrl: add a pincontrol driver for BCM6362Add a pincotrol driver for BCM6362. BCM6362 allows muxing individualGPIO pins to the LED controller, to be available by the integratedwifi, or other functions. It also supports overlay groups, of whichonly NAND is documented.Co-developed-by: Jonas Gorski Signed-off-by: Jonas Gorski Signed-off-by: Álvaro Fernández Rojas Link: https://lore.kernel.org/r/20210324081923.20379-14-noltari@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

9494b169 - pinctrl: add a pincontrol driver for BCM6358

Wed, 24 Mar 2021 08:19:11 +0000

pinctrl: add a pincontrol driver for BCM6358Add a pincotrol driver for BCM6358. BCM6358 allow overlaying differentfunctions onto the GPIO pins. It does not support configuring individualpins but only whole groups. These groups may overlap, and still requirethe directions to be set correctly in the GPIO register. In addition thefunctions register controls other, not directly mux related functions.Co-developed-by: Jonas Gorski Signed-off-by: Jonas Gorski Signed-off-by: Álvaro Fernández Rojas Link: https://lore.kernel.org/r/20210324081923.20379-11-noltari@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

9bf34ac5 - pinctrl: add a pincontrol driver for BCM6328

Wed, 24 Mar 2021 08:19:08 +0000

pinctrl: add a pincontrol driver for BCM6328Add a pincontrol driver for BCM6328. BCM6328 supports muxing 32 pins asGPIOs, as LEDs for the integrated LED controller, or various otherfunctions. Its pincontrol mux registers also control other aspects, likeswitching the second USB port between host and device mode.Co-developed-by: Jonas Gorski Signed-off-by: Jonas Gorski Signed-off-by: Álvaro Fernández Rojas Link: https://lore.kernel.org/r/20210324081923.20379-8-noltari@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

132f9501 - pinctrl: bcm: add bcm63xx base code

Wed, 24 Mar 2021 08:19:05 +0000

pinctrl: bcm: add bcm63xx base codeAdd a helper for registering BCM63XX pin controllers.Co-developed-by: Jonas Gorski Signed-off-by: Jonas Gorski Signed-off-by: Álvaro Fernández Rojas Link: https://lore.kernel.org/r/20210324081923.20379-5-noltari@gmail.comSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

c12fb177 - pinctrl: bcm: add Northstar driver

Wed, 26 Sep 2018 19:31:03 +0000

pinctrl: bcm: add Northstar driverThis driver provides support for Northstar mux controller. It differsfrom Northstar Plus one so a new binding and driver were needed.Signed-off-by: Rafał Miłecki Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

cc4fa83f - pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC

Thu, 23 Jun 2016 17:35:07 +0000

pinctrl: nsp: add pinmux driver support for Broadcom NSP SoCThis adds the initial support of the Broadcom NSP pinmux driver.Signed-off-by: Yendapally Reddy Dhananjaya Reddy Reviewed-by: Ray Jui Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

b5aa1006 - pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoC

Fri, 29 Apr 2016 12:51:38 +0000

pinctrl: ns2: add pinmux driver support for Broadcom NS2 SoCThis adds the initial support of the Broadcom NS2 pinmux driverSigned-off-by: Yendapally Reddy Dhananjaya Reddy Reviewed-by: Ray Jui Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

8bfcbbbc - pinctrl: nsp: add gpio-a driver support for Broadcom NSP SoC

Fri, 04 Dec 2015 17:11:42 +0000

pinctrl: nsp: add gpio-a driver support for Broadcom NSP SoCThis adds the initial support of the Broadcom NSP gpio-a driver.Signed-off-by: Yendapally Reddy Dhananjaya Reddy Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

616043d5 - pinctrl: Rename gpio driver from cygnus to iproc

Thu, 19 Nov 2015 03:52:19 +0000

pinctrl: Rename gpio driver from cygnus to iprocRename gpio driver file name from pinctrl-cygnus-gpio.c topinctrl-iproc-gpio.c to make it more generic so that alliproc based future SoCs using the same gpio block coulduse this driver.Signed-off-by: Pramod Kumar Reviewed-by: Ray Jui Reviewed-by: Scott Branden Acked-by: Rob Herring Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

b64333ce - pinctrl: cygnus: add gpio/pinconf driver

Mon, 09 Mar 2015 20:45:00 +0000

pinctrl: cygnus: add gpio/pinconf driverThis adds the initial support of the Broadcom Cygnus GPIO/PINCONF driverthat supports all 3 GPIO controllers on Cygnus including the ASIU GPIOcontroller, the chipCommonG GPIO controller, and the always-on GPIOcontroller. Basic PINCONF configurations such as bias pull up/down, anddrive strength are also supported in this driver.Pins from the ASIU GPIO controller can be individually muxed to GPIOfunction, through interaction with the Cygnus IOMUX controllerSigned-off-by: Ray Jui Reviewed-by: Scott Branden Tested-by: Dmitry Torokhov Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

cbd159ed - pinctrl: cygnus: add initial IOMUX driver support

Thu, 05 Mar 2015 00:35:51 +0000

pinctrl: cygnus: add initial IOMUX driver supportThis adds the initial driver support for the Broadcom Cygnus IOMUXcontroller. The Cygnus IOMUX controller supports group based muxconfiguration but allows certain pins to be muxed to GPIO individuallySigned-off-by: Ray Jui Reviewed-by: Scott Branden Tested-by: Dmitry Torokhov Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile

b17f2f9b - pinctrl: bcm: consolidate Broadcom pinctrl drivers

Thu, 05 Mar 2015 00:35:49 +0000

pinctrl: bcm: consolidate Broadcom pinctrl driversConsolidate Broadcom pinctrl drivers into drivers/pinctrl/bcm/*Signed-off-by: Ray Jui Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/pinctrl/bcm/Makefile