Changes in Makefile

2a56dc65 - phy: amlogic: Add G12A Analog MIPI D-PHY driver

Tue, 05 Jul 2022 07:56:50 +0000

phy: amlogic: Add G12A Analog MIPI D-PHY driverThe Amlogic G12A SoCs embeds an Analog MIPI D-PHY used to communicate with DSIpanels.Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20220705075650.3165348-3-narmstrong@baylibre.comSigned-off-by: Vinod Koul List of files: /linux-6.15/drivers/phy/amlogic/Makefile

e45dbd3a - phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2

Wed, 20 Oct 2021 19:51:07 +0000

phy: amlogic: Add a new driver for the HDMI TX PHY on Meson8/8b/8m2Amlogic Meson8/8b/8m2 have a built-in HDMI PHY in the HHI registerregion. Unfortunately only few register bits are documented. ForHHI_HDMI_PHY_CNTL0 the magic numbers are taken from the 3.10 vendorkernel.Signed-off-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20211020195107.1564533-3-martin.blumenstingl@googlemail.comSigned-off-by: Vinod Koul List of files: /linux-6.15/drivers/phy/amlogic/Makefile

76aefb22 - phy: amlogic: Add AXG MIPI D-PHY driver

Mon, 16 Nov 2020 10:13:15 +0000

phy: amlogic: Add AXG MIPI D-PHY driverThe Amlogic AXG SoCs embeds a MIPI D-PHY used to communicate with DSIpanels.Signed-off-by: Neil Armstrong Link: https://lore.kernel.org/r/20201116101315.71720-3-narmstrong@baylibre.comSigned-off-by: Vinod Koul List of files: /linux-6.15/drivers/phy/amlogic/Makefile

40f67068 - phy: amlogic: meson-gxl-usb3: remove code for non-existing PHY

Thu, 16 Apr 2020 12:19:07 +0000

phy: amlogic: meson-gxl-usb3: remove code for non-existing PHYThe registers which are managed by the meson-gxl-usb3 PHY driver areactually "USB control" registers (which are "glue" registers whichmanage OTG detection and routing of the OTG capable port between theDWC2 peripheral-only controller and the DWC3 host-only controller).Drop the meson-gxl-usb3 PHY driver now that the dwc3-meson-g12a-usbdriver supports the USB control registers on GXL and GXM SoCs (thesewere previously managed by the meson-gxl-usb3 PHY driver).Signed-off-by: Martin Blumenstingl Signed-off-by: Neil Armstrong Signed-off-by: Felipe Balbi List of files: /linux-6.15/drivers/phy/amlogic/Makefile

e2463559 - phy: amlogic: Add Amlogic AXG PCIE PHY Driver

Thu, 23 Jan 2020 23:29:42 +0000

phy: amlogic: Add Amlogic AXG PCIE PHY DriverThis adds support for the PCI PHY found in the Amlogic AXG SoC Family.This will allow to mutualize code in pci-meson.c between AXG and G12ASoC.This PHY also uses and chains an analog PHY, which on AXG platformis needed to have reliable PCIe communication.Signed-off-by: Remi Pommarel Signed-off-by: Lorenzo Pieralisi Reviewed-by: Neil Armstrong List of files: /linux-6.15/drivers/phy/amlogic/Makefile

af3f5722 - phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver

Thu, 23 Jan 2020 23:29:41 +0000

phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY DriverThis adds support for the MIPI analog PHY which is also used for PCIEfound in the Amlogic AXG SoC Family.MIPI or PCIE selection is done by the #phy-cells, making the modestatic and exclusive.For now only PCIE functionality is supported.This PHY will be used to replace the mipi_enable clock gating logicwhich was mistakenly added in the clock subsystem. This also activatesa non documented band gap bit in those registers that allows reliablePCIE clock signal generation on AXG platforms.Signed-off-by: Remi Pommarel Signed-off-by: Lorenzo Pieralisi Reviewed-by: Neil Armstrong Acked-by: Jerome Brunet List of files: /linux-6.15/drivers/phy/amlogic/Makefile

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/phy/amlogic/Makefile

36077e16 - phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY Driver

Mon, 25 Mar 2019 09:39:41 +0000

phy: amlogic: Add Amlogic G12A USB3 + PCIE Combo PHY DriverThis adds support for the shared USB3 + PCIE PHY found in theAmlogic G12A SoC Family.It supports USB3 Host mode or PCIE 2.0 mode, depending on the layout ofthe board.Selection is done by the #phy-cells, making the mode static and exclusive.Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kishon Vijay Abraham I List of files: /linux-6.15/drivers/phy/amlogic/Makefile

16df8bcb - phy: amlogic: add Amlogic G12A USB2 PHY Driver

Mon, 25 Mar 2019 09:39:40 +0000

phy: amlogic: add Amlogic G12A USB2 PHY DriverThis adds support for the USB2 PHY found in the Amlogic G12A SoC Family.It supports Host and/or Peripheral mode, depending on it's position.The first PHY is only used as Host, but the second supports Dual modesdefined by the USB Control Glue HW in front of the USB Controllers.Signed-off-by: Neil Armstrong Reviewed-by: Martin Blumenstingl Signed-off-by: Kishon Vijay Abraham I List of files: /linux-6.15/drivers/phy/amlogic/Makefile

115de9fd - phy: amlogic: add USB3 PHY support for Meson GXL and GXM

Sat, 03 Mar 2018 18:47:00 +0000

phy: amlogic: add USB3 PHY support for Meson GXL and GXMThis adds a new driver for the USB3 PHY found on Meson GXL and GXM SoCs(both SoCs are using the same USB PHY register layout).Unfortunately there is no documentation for this PHY in the public S905Xdatasheet (published for example by Khadas). What we know so far aboutthis PHY:- even though the Meson GXL and GXM SoCs do not expose an USB3 port (the dwc3 controller only has USB2 ports enabled) we need to initialize the USB3 PHY (specifically USB_R1_U3H_FLADJ_30MHZ_REG_MASK). Without this initialization high-speed USB devices (especially USB hard disks and thumb drives, slower devices like mice do not seem to be affected)- on some boards the USB3 PHY starts in "device mode" - we want to bring it into a known state (by switching it to host mode for now).- it is responsible for the OTG detection and for switching the first USB2 PHY between host and peripheral (aka device) mode. an interrupt can be used to detect changes between host and device mode.There are five inputs to this register area:- the clock and reset line for the USB3 PHY itself- the clock and reset line for the peripheral mode and OTG detection logic (on the GXL and GXM SoCs these are the same clock and reset line as for the USB3 PHY itself, but Amlogic sees this as two different components - even though they share the same register space - so they have to be passed individually to allow specifying different inputs on other SoCs if needed)- the interrupt for the OTG detection logicThe whole OTG detection logic is not implemented yet.Signed-off-by: Martin Blumenstingl Tested-by: Yixun Lan Tested-by: Neil Armstrong Signed-off-by: Kishon Vijay Abraham I List of files: /linux-6.15/drivers/phy/amlogic/Makefile

697b373c - phy: meson: add USB2 PHY support for Meson GXL and GXM

Sat, 20 May 2017 13:50:41 +0000

phy: meson: add USB2 PHY support for Meson GXL and GXMThis adds a new driver for the USB2 PHYs found on Meson GXL and GXM SoCs(both SoCs are using the same USB PHY register layout).The USB2 PHY is a simple PHY which only has a few registers to configurethe mode (host/device) and a reset register (to enable/disable the PHY).Unfortunately there are no datasheets available for this PHY. The driverwas written by reading the code from Amlogic's GPL kernel sources andby analyzing the registers on an actual GXL and GXM device running thekernel that was shipped on the boards I have.Signed-off-by: Martin Blumenstingl Signed-off-by: Kishon Vijay Abraham I List of files: /linux-6.15/drivers/phy/amlogic/Makefile

0b56e9a7 - phy: Group vendor specific phy drivers

Thu, 11 May 2017 06:47:42 +0000

phy: Group vendor specific phy driversAdding vendor specific directories in phy to groupphy drivers under their respective vendor umbrella.Also updated the MAINTAINERS file to reflect the correctdirectory structure for phy drivers.Signed-off-by: Vivek Gautam Acked-by: Heiko Stuebner Acked-by: Viresh Kumar Acked-by: Krzysztof Kozlowski Acked-by: Yoshihiro Shimoda Reviewed-by: Jaehoon Chung Cc: Kishon Vijay Abraham I Cc: David S. Miller Cc: Geert Uytterhoeven Cc: Yoshihiro Shimoda Cc: Guenter Roeck Cc: Heiko Stuebner Cc: Viresh Kumar Cc: Maxime Ripard Cc: Chen-Yu Tsai Cc: Sylwester Nawrocki Cc: Krzysztof Kozlowski Cc: Jaehoon Chung Cc: Stephen Boyd Cc: Martin Blumenstingl Cc: linux-arm-kernel@lists.infradead.orgCc: linux-arm-msm@vger.kernel.orgCc: linux-kernel@vger.kernel.orgCc: linux-omap@vger.kernel.orgCc: linux-renesas-soc@vger.kernel.orgCc: linux-rockchip@lists.infradead.orgCc: linux-samsung-soc@vger.kernel.orgCc: linux-usb@vger.kernel.orgSigned-off-by: Kishon Vijay Abraham I List of files: /linux-6.15/drivers/phy/amlogic/Makefile