Changes in Kconfig

8e1debd8 - wifi: ath10k: add LED and GPIO controlling support for various chipsets

Mon, 13 May 2024 14:22:25 +0000

wifi: ath10k: add LED and GPIO controlling support for various chipsetsAdds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984based chipsets with on chipset connected led's using WMI Firmware API.The LED device will get available named as "ath10k-phyX" at sysfs andcan be controlled with various triggers.Adds also debugfs interface for gpio control.Signed-off-by: Sebastian Gottschall Reviewed-by: Steve deRosier [kvalo: major reorg and cleanup]Signed-off-by: Kalle Valo [ansuel: rebase and small cleanup]Signed-off-by: Christian Marangi Tested-by: Stefan Lippers-Hollmann Signed-off-by: Kalle Valo Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

21ae74e1 - wifi: ath10k: fix QCOM_RPROC_COMMON dependency

Fri, 17 May 2024 07:00:28 +0000

wifi: ath10k: fix QCOM_RPROC_COMMON dependencyIf ath10k_snoc is built-in, while Qualcomm remoteprocs are built asmodules, compilation fails with:/usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_init':drivers/net/wireless/ath/ath10k/snoc.c:1534: undefined reference to `qcom_register_ssr_notifier'/usr/bin/aarch64-linux-gnu-ld: drivers/net/wireless/ath/ath10k/snoc.o: in function `ath10k_modem_deinit':drivers/net/wireless/ath/ath10k/snoc.c:1551: undefined reference to `qcom_unregister_ssr_notifier'Add corresponding dependency to ATH10K_SNOC Kconfig entry so that it'sbuilt as module if QCOM_RPROC_COMMON is built as module too.Fixes: 747ff7d3d742 ("ath10k: Don't always treat modem stop events as crashes")Cc: stable@vger.kernel.orgSigned-off-by: Dmitry Baryshkov Signed-off-by: Kalle Valo Link: https://msgid.link/20240511-ath10k-snoc-dep-v1-1-9666e3af5c27@linaro.org List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

d0340718 - wifi: ath10k: fix QCOM_SMEM dependency

Fri, 02 Dec 2022 10:30:27 +0000

wifi: ath10k: fix QCOM_SMEM dependencyNathan noticed that when HWSPINLOCK is disabled there's a Kconfig warning: WARNING: unmet direct dependencies detected for QCOM_SMEM Depends on [n]: (ARCH_QCOM [=y] || COMPILE_TEST [=n]) && HWSPINLOCK [=n] Selected by [m]: - ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM [=y] || COMPILE_TEST [=n])The problem here is that QCOM_SMEM depends on HWSPINLOCK so we cannot selectQCOM_SMEM and instead we neeed to use 'depends on'.Reported-by: Nathan Chancellor Link: https://lore.kernel.org/all/Y4YsyaIW+CPdHWv3@dev-arch.thelio-3990X/Fixes: 4d79f6f34bbb ("wifi: ath10k: Store WLAN firmware version in SMEM image table")Signed-off-by: Kalle Valo Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221202103027.25974-1-kvalo@kernel.org List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

4d79f6f3 - wifi: ath10k: Store WLAN firmware version in SMEM image table

Thu, 17 Nov 2022 18:05:34 +0000

wifi: ath10k: Store WLAN firmware version in SMEM image tableIn a SoC based solution, it would be useful to know the versions of thevarious binary firmware blobs the system is running on. On a QCOM basedSoC, this info can be obtained from socinfo debugfs infrastructure. Forthis to work, respective subsystem drivers have to export the firmwareversion information to an SMEM based version information table.Having firmware version information at one place will help quicklyfigure out the firmware versions of various subsystems on the deviceinstead of going through builds/logs in an event of a system crash.Fill WLAN firmware version information in SMEM version table to beprinted as part of socinfo debugfs infrastructure on a Qualcomm basedSoC.This change is applicable only for SNOC/QMI based targets.Example:cat /sys/kernel/debug/qcom_socinfo/cnss/nameQC_IMAGE_VERSION_STRING=WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.2.2.c10-00754-QCAHLSWMTPL-1Signed-off-by: Youghandhar Chintala Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20221117180534.2267-1-quic_youghand@quicinc.com List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

424953cf - qcom_scm: hide Kconfig symbol

Tue, 28 Sep 2021 07:50:27 +0000

qcom_scm: hide Kconfig symbolNow that SCM can be a loadable module, we have to add anotherdependency to avoid link failures when ipa or adreno-gpu arebuilt-in:aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe':ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available'ld.lld: error: undefined symbol: qcom_scm_is_available>>> referenced by adreno_gpu.c>>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.aThis can happen when CONFIG_ARCH_QCOM is disabled and we don't selectQCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'duse a similar dependency here to what we have for QCOM_RPROC_COMMON,but that causes dependency loops from other things selecting QCOM_SCM.This appears to be an endless problem, so try something different thistime: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already.Acked-by: Kalle Valo Acked-by: Alex Elder Signed-off-by: Arnd Bergmann List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

b42000e4 - firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent module

Wed, 07 Jul 2021 04:53:20 +0000

firmware: qcom_scm: Allow qcom_scm driver to be loadable as a permenent moduleAllow the qcom_scm driver to be loadable as a permenent module.This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit toensure that drivers that call into the qcom_scm driver arealso built as modules. While not ideal in some cases its theonly safe way I can find to avoid build errors without havingthose drivers select QCOM_SCM and have to force it on (asQCOM_SCM=n can be valid for those drivers).Reviving this now that Saravana's fw_devlink defaults to on,which should avoid loading troubles seen before.Acked-by: Kalle Valo Acked-by: Greg Kroah-Hartman Acked-by: Will Deacon Reviewed-by: Bjorn Andersson Signed-off-by: John Stultz Link: https://lore.kernel.org/r/20210707045320.529186-1-john.stultz@linaro.orgSigned-off-by: Bjorn Andersson List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

8dc24866 - Revert "firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module"

Mon, 23 Nov 2020 12:33:20 +0000

Revert "firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module"This reverts commit d0511b5496c03cdbcda55a9b57c32cdd751920ed.After some time it was noticed that the Tegra186 among otherswere experiencing problems when making this into a module.Signed-off-by: Linus Walleij List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

d0511b54 - firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent module

Fri, 06 Nov 2020 04:27:10 +0000

firmware: QCOM_SCM: Allow qcom_scm driver to be loadable as a permenent moduleAllow the qcom_scm driver to be loadable as a permenent module.This still uses the "depends on QCOM_SCM || !QCOM_SCM" bit toensure that drivers that call into the qcom_scm driver arealso built as modules. While not ideal in some cases its theonly safe way I can find to avoid build errors without havingthose drivers select QCOM_SCM and have to force it on (asQCOM_SCM=n can be valid for those drivers).Signed-off-by: John Stultz Reviewed-by: Bjorn Andersson Acked-by: Kalle Valo Acked-by: Greg Kroah-Hartman Cc: Catalin Marinas Cc: Will Deacon Cc: Andy Gross Cc: Bjorn Andersson Cc: Joerg Roedel Cc: Thomas Gleixner Cc: Jason Cooper Cc: Marc Zyngier Cc: Linus Walleij Cc: Vinod Koul Cc: Kalle Valo Cc: Maulik Shah Cc: Lina Iyer Cc: Saravana Kannan Cc: Todd Kjos Cc: Greg Kroah-Hartman Cc: linux-arm-msm@vger.kernel.orgCc: iommu@lists.linux-foundation.orgCc: linux-gpio@vger.kernel.orgLink: https://lore.kernel.org/r/20201106042710.55979-3-john.stultz@linaro.orgSigned-off-by: Linus Walleij List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

a7f7f624 - treewide: replace '---help---' in Kconfig files with 'help'

Sat, 13 Jun 2020 16:50:22 +0000

treewide: replace '---help---' in Kconfig files with 'help'Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over'---help---'"), the number of '---help---' has been graduallydecreasing, but there are still more than 2400 instances.This commit finishes the conversion. While I touched the lines,I also fixed the indentation.There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---'In order to convert all of them to 1 tab + 'help', I ran thefollowing commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'Signed-off-by: Masahiro Yamada List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

4d0f3604 - ath10k: remove experimental tag from SDIO and SNOC busses in Kconfig

Fri, 08 May 2020 02:56:10 +0000

ath10k: remove experimental tag from SDIO and SNOC busses in Kconfigath10k(sdio/snoc) is no longer experimental. Remove experimental tag forSDIO/SNOC from ath10k Kconfig.Signed-off-by: Govind Singh Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20200507055324.15564-1-govinds@codeaurora.org List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

0766789b - ath: fix SPDX tags

Tue, 25 Jun 2019 14:52:25 +0000

ath: fix SPDX tagsCommit ec8f24b7faaf ("treewide: Add SPDX license identifier -Makefile/Kconfig") marked various Makefiles and Kconfig files within athdirectories as GPL-2.0. But these modules and drivers are actually ISC:* ath* ar5523* ath10k* ath5k* ath6kl* ath9k* wcn36xx* wil6210Fix SPDX tags accordingly.Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

87659675 - ath10k: remove work in progress logs from snoc driver

Thu, 20 Dec 2018 07:53:36 +0000

ath10k: remove work in progress logs from snoc driverAll the necessary patches to make wifi running (over SNOC)are merged and tested on SDM845/QCS404 platform with WCN3990wifi module, hence remove work in progress debug from snocdriver and Kconfig.Signed-off-by: Govind Singh Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

ba94c753 - ath10k: add QMI message handshake for wcn3990 client

Thu, 11 Oct 2018 10:16:26 +0000

ath10k: add QMI message handshake for wcn3990 clientAdd WCN3990 QMI client handshakes for Q6 integrated WLAN connectivitysubsystem. This layer is responsible for communicating qmi controlmessages to wifi fw QMI service using QMI messaging protocol.Qualcomm MSM Interface(QMI) is a messaging format used to communicatebetween components running between remote processors with underlyingtransport layer based on integrated chipset(shared memory) ordiscrete chipset(PCI/USB/SDIO/UART).Signed-off-by: Govind Singh Reviewed-by: Bjorn Andersson Acked-by: Niklas Cassel Reviewed-by: Brian Norris Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

f1908735 - ath10k: allow ATH10K_SNOC with COMPILE_TEST

Tue, 12 Jun 2018 11:39:06 +0000

ath10k: allow ATH10K_SNOC with COMPILE_TESTATH10K_SNOC builds just fine with COMPILE_TEST, so make that possible.Signed-off-by: Niklas Cassel Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

50c51f39 - ath10k: do not mix spaces and tabs in Kconfig

Tue, 12 Jun 2018 11:39:05 +0000

ath10k: do not mix spaces and tabs in KconfigDo not mix spaces and tabs in Kconfig.Signed-off-by: Niklas Cassel Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

17f5559e - ath10k: platform driver for WCN3990 SNOC WLAN module

Tue, 10 Apr 2018 15:01:14 +0000

ath10k: platform driver for WCN3990 SNOC WLAN moduleWCN3990 is integrated 802.11ac chipset with SNOCbus interface. Add snoc layer driver registrationand associated ops.WCN3990 support is not yet complete as cold-boothandshake is done using qmi(Qualcomm-MSM-Interface)and qmi client support will be added once qmi frameworkis available.Signed-off-by: Govind Singh Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

a0aedd6e - ath10k: build ce layer in ath10k core module

Tue, 10 Apr 2018 15:01:11 +0000

ath10k: build ce layer in ath10k core moduleCE layer is shared between pci and snoc target and resultsin duplicate object inclusion if both modules are compiledtogether statically and undefined KBUILD_MODNAME ifcompiled as module.Fix this by building ce layer in ath10k core module byadding ce object inclusion with ATH10K_CE boolean CONFIG.Signed-off-by: Govind Singh Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

42e01cb9 - ath10k: move spectral scan support under a separate config symbol

Mon, 27 Nov 2017 17:56:23 +0000

ath10k: move spectral scan support under a separate config symbolAt the moment, spectral scan support, and with it RELAY, is always enabledwith ATH10K_DEBUGFS. Spectral scan support is currently the only user ofRELAY in ath10k, and it unconditionally reserves a relay channel.Having debugfs support in ath10k is often useful even on very smallembedded routers, where we'd rather like to avoid the code size and RAMusage of the relay support. While ath10k-based devices usually have moreresources than ath9k-based ones, it makes sense to keep the configurationsymmetric to ath9k, so the same base kernel without RELAY can be used forboth ath9k and ath10k hardware.Signed-off-by: Matthias Schiffer Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig

4db66499 - ath10k: add initial USB support

Fri, 28 Jul 2017 12:15:39 +0000

ath10k: add initial USB supportChipsets like QCA9377 have support for USB so add initial USB bussupport to ath10k. With this patch we have the low level HIF andHTC protocol working and it's possible to boot the firmware,but it's still not possible to connect or anything like.More changes are needed for full functionality. For that reasonwe print during initialisation:WARNING: ath10k USB support is incomplete, don't expect anything to work!Signed-off-by: Erik Stromdahl Signed-off-by: Kalle Valo List of files: /linux-6.15/drivers/net/wireless/ath/ath10k/Kconfig