Changes in Kconfig

8fa19c2c - net: wangxun: fix LIBWX dependencies

Mon, 24 Feb 2025 14:05:06 +0000

net: wangxun: fix LIBWX dependenciesSelecting LIBWX requires that its dependencies are met first:WARNING: unmet direct dependencies detected for LIBWX Depends on [m]: NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PTP_1588_CLOCK_OPTIONAL [=m] Selected by [y]: - TXGBE [=y] && NETDEVICES [=y] && ETHERNET [=y] && NET_VENDOR_WANGXUN [=y] && PCI [=y] && COMMON_CLK [=y] && I2C_DESIGNWARE_PLATFORM [=y]ld.lld-21: error: undefined symbol: ptp_schedule_worker>>> referenced by wx_ptp.c:747 (/home/arnd/arm-soc/drivers/net/ethernet/wangxun/libwx/wx_ptp.c:747)>>> drivers/net/ethernet/wangxun/libwx/wx_ptp.o:(wx_ptp_reset) in archive vmlinux.aAdd the smae dependency on PTP_1588_CLOCK_OPTIONAL to the two driverusing this library module.Fixes: 06e75161b9d4 ("net: wangxun: Add support for PTP clock")Signed-off-by: Arnd Bergmann Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250224140516.1168214-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

06e75161 - net: wangxun: Add support for PTP clock

Tue, 18 Feb 2025 02:34:29 +0000

net: wangxun: Add support for PTP clockImplement support for PTP clock on Wangxun NICs.Signed-off-by: Jiawen Wu Reviewed-by: Vadim Fedorenko Link: https://patch.msgid.link/20250218023432.146536-2-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

4b096475 - net: txgbe: Fix I2C Kconfig dependencies

Tue, 03 Sep 2024 14:25:05 +0000

net: txgbe: Fix I2C Kconfig dependenciesThe dependency handling of the Synopsys DesignWare I2Cadapter drivers is going to be changed so that the gluedrivers for the platform and PCI buses depend onI2C_DESIGNWARE_CORE. Right now this driver prevents thatupdate because it selects I2C_DESIGNWARE_PLATFORM.To make the dependency on I2C_DESIGNWARE_PLATFORM consistentwith the other drivers in kernel that depend on it, andallow the dependency handling of the Synopsys DesignWare I2Cdrivers to be updated, change the "select" into "depends on".Cc: Jiawen Wu Cc: Mengyuan Lou Cc: David S. Miller Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: netdev@vger.kernel.orgSigned-off-by: Heikki Krogerus Acked-by: Jarkko Nikula Signed-off-by: Andi Shyti List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

b3739fb3 - wangxunx: select CONFIG_PHYLINK where needed

Thu, 11 Jan 2024 16:27:53 +0000

wangxunx: select CONFIG_PHYLINK where neededThe ngbe driver needs phylink:arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/libwx/wx_ethtool.o: in function `wx_nway_reset':wx_ethtool.c:(.text+0x458): undefined reference to `phylink_ethtool_nway_reset'arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_remove':ngbe_main.c:(.text+0x7c): undefined reference to `phylink_destroy'arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_main.o: in function `ngbe_open':ngbe_main.c:(.text+0xf90): undefined reference to `phylink_connect_phy'arm-linux-gnueabi-ld: drivers/net/ethernet/wangxun/ngbe/ngbe_mdio.o: in function `ngbe_mdio_init':ngbe_mdio.c:(.text+0x314): undefined reference to `phylink_create'Add the missing Kconfig description for this.Fixes: bc2426d74aa3 ("net: ngbe: convert phylib to phylink")Signed-off-by: Arnd Bergmann Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20240111162828.68564-1-arnd@kernel.orgSigned-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

02b2a6f9 - net: txgbe: support copper NIC with external PHY

Wed, 23 Aug 2023 06:19:34 +0000

net: txgbe: support copper NIC with external PHYWangxun SP chip supports to connect with external PHY (marvell 88x3310),which links to 10GBASE-T/1000BASE-T/100BASE-T. Add the identification ofmedia types from subsystem device IDs. For sp_media_copper, register mdiobus for the external PHY.Signed-off-by: Jiawen Wu Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

854cace6 - net: txgbe: Implement phylink pcs

Tue, 06 Jun 2023 09:21:06 +0000

net: txgbe: Implement phylink pcsRegister MDIO bus for PCS layer to use Synopsys designware XPCS, support10GBASE-R interface to the controller.Signed-off-by: Jiawen Wu Reviewed-by: Andrew Lunn Reviewed-by: Maciej Fijalkowski Signed-off-by: Paolo Abeni List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

b83c3731 - net: txgbe: Support GPIO to SFP socket

Tue, 06 Jun 2023 09:21:04 +0000

net: txgbe: Support GPIO to SFP socketRegister GPIO chip and handle GPIO IRQ for SFP socket.Signed-off-by: Jiawen Wu Reviewed-by: Andy Shevchenko Reviewed-by: Maciej Fijalkowski Signed-off-by: Paolo Abeni List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

04d94236 - net: txgbe: Add SFP module identify

Tue, 06 Jun 2023 09:21:03 +0000

net: txgbe: Add SFP module identifyRegister SFP platform device to get modules information.Signed-off-by: Jiawen Wu Reviewed-by: Andrew Lunn Reviewed-by: Piotr Raczynski Reviewed-by: Maciej Fijalkowski Signed-off-by: Paolo Abeni List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

c625e725 - net: txgbe: Register I2C platform device

Tue, 06 Jun 2023 09:21:02 +0000

net: txgbe: Register I2C platform deviceRegister the platform device to use Designware I2C bus master driver.Use regmap to read/write I2C device region from given base offset.Signed-off-by: Jiawen Wu Reviewed-by: Andrew Lunn Reviewed-by: Piotr Raczynski Reviewed-by: Andy Shevchenko Reviewed-by: Maciej Fijalkowski Signed-off-by: Paolo Abeni List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

b63f2048 - net: txgbe: Register fixed rate clock

Tue, 06 Jun 2023 09:21:01 +0000

net: txgbe: Register fixed rate clockIn order for I2C to be able to work in standard mode, register a fixedrate clock for each I2C device.Signed-off-by: Jiawen Wu Reviewed-by: Andrew Lunn Reviewed-by: Maciej Fijalkowski Signed-off-by: Paolo Abeni List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

850b9711 - net: libwx: Allocate Rx and Tx resources

Fri, 03 Feb 2023 09:11:30 +0000

net: libwx: Allocate Rx and Tx resourcesSetup Rx and Tx descriptors for specefic rings.Signed-off-by: Jiawen Wu Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

a1cf597b - net: ngbe: Add ngbe mdio bus driver.

Wed, 11 Jan 2023 11:17:18 +0000

net: ngbe: Add ngbe mdio bus driver.Add mdio bus register for ngbe.The internal phy and external phy need to be handled separately.Add phy changed event detection.Signed-off-by: Mengyuan Lou Reviewed-by: Andrew Lunn Link: https://lore.kernel.org/r/20230111111718.40745-1-mengyuanlou@net-swift.comSigned-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

02338c48 - net: ngbe: Initialize sw info and register netdev

Mon, 31 Oct 2022 07:07:57 +0000

net: ngbe: Initialize sw info and register netdevInitialize ngbe mac/phy type.Check whether the firmware is initialized.Initialize ngbe hw and register netdev.Signed-off-by: Mengyuan Lou Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

a34b3e6e - net: txgbe: Store PCI info

Thu, 27 Oct 2022 06:11:14 +0000

net: txgbe: Store PCI infoGet PCI config space info, set LAN id and check flash status.Signed-off-by: Jiawen Wu Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

e79e40c8 - net: ngbe: Add build support for ngbe

Fri, 26 Aug 2022 03:46:09 +0000

net: ngbe: Add build support for ngbeAdd build options and guidance doc.Initialize pci device access for Wangxun Gigabit Ethernet devices.Reviewed-by: Andrew Lunn Signed-off-by: Mengyuan Lou Link: https://lore.kernel.org/r/20220826034609.51854-1-mengyuanlou@net-swift.comSigned-off-by: Paolo Abeni List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

049d5d98 - eth: fix the help in Wangxun's Kconfig

Thu, 04 Aug 2022 18:26:41 +0000

eth: fix the help in Wangxun's KconfigThe text was copy&pasted from Intel, adjust it to say Wangxun.Reported-by: Ingo Saitz Fixes: 3ce7547e5b71 ("net: txgbe: Add build support for txgbe")Link: https://lore.kernel.org/r/20220804182641.1442000-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig

3ce7547e - net: txgbe: Add build support for txgbe

Tue, 28 Jun 2022 09:55:30 +0000

net: txgbe: Add build support for txgbeAdd doc build infrastructure for txgbe driver.Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices.Signed-off-by: Jiawen Wu Link: https://lore.kernel.org/r/20220628095530.889344-1-jiawenwu@trustnetic.comSigned-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/wangxun/Kconfig