Changes in Makefile

5e726071 - qed: Remove IP services API.

Thu, 21 Apr 2022 12:47:26 +0000

qed: Remove IP services API.qed_nvmetcp_ip_services.c and its corresponding header file wereintroduced in commit 806ee7f81a2b ("qed: Add IP services APIs support")but there's still no users for any of the functions they declare.Since these files are effectively unused, let's just drop them.Found by code inspection. Compile-tested only.Signed-off-by: Guillaume Nault Link: https://lore.kernel.org/r/351ac8c847980e22850eb390553f8cc0e1ccd0ce.1650545051.git.gnault@redhat.comSigned-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

826da486 - qed: Add NVMeTCP Offload IO Level FW Initializations

Wed, 02 Jun 2021 17:16:54 +0000

qed: Add NVMeTCP Offload IO Level FW InitializationsThis patch introduces the NVMeTCP FW initializations which is usedto initialize the IO level configuration into a per IO HWresource ("task") as part of the IO path flow.This includes:- Write IO FW initialization- Read IO FW initialization.- IC-Req and IC-Resp FW exchange.- FW Cleanup flow (Flush IO).Acked-by: Igor Russkikh Signed-off-by: Prabhakar Kushwaha Signed-off-by: Omkar Kulkarni Signed-off-by: Shai Malin Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Reviewed-by: Hannes Reinecke Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

897e87a1 - qed: Add NVMeTCP Offload PF Level FW and HW HSI

Wed, 02 Jun 2021 17:16:50 +0000

qed: Add NVMeTCP Offload PF Level FW and HW HSIThis patch introduces the NVMeTCP device and PF level HSI and HSIfunctionality in order to initialize and interact with the HW device.The patch also adds qed NVMeTCP personality.This patch is based on the qede, qedr, qedi, qedf drivers HSI.Acked-by: Igor Russkikh Signed-off-by: Dean Balandin Signed-off-by: Prabhakar Kushwaha Signed-off-by: Omkar Kulkarni Signed-off-by: Shai Malin Signed-off-by: Michal Kalderon Signed-off-by: Ariel Elior Reviewed-by: Hannes Reinecke Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

52306dee - qed: move out devlink logic into a new file

Sun, 23 Aug 2020 11:19:25 +0000

qed: move out devlink logic into a new fileWe are extending devlink infrastructure, thus move the existingstuff into a new file qed_devlink.cSigned-off-by: Igor Russkikh Signed-off-by: Alexander Lobakin Signed-off-by: Michal Kalderon Reviewed-by: Jesse Brandeburg Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

a08c9b2c - qed: move chain methods to a separate file

Wed, 22 Jul 2020 22:10:33 +0000

qed: move chain methods to a separate fileMove chain allocation/freeing functions to a new file to not mix it withhardware-related code.Reported-by: kernel test robot Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

bdaf98f6 - qed: reformat Makefile

Wed, 22 Jul 2020 22:10:32 +0000

qed: reformat MakefileList one entry per line and sort them alphabetically to simplify theaddition of the new ones.Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: Michal Kalderon Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

663eacd8 - net: qed: update copyright years

Mon, 29 Jun 2020 11:05:09 +0000

net: qed: update copyright yearsSet the actual copyright holder and years in all qed source files.Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

ab81e23c - net: qed: correct existing SPDX tags

Mon, 29 Jun 2020 11:05:07 +0000

net: qed: correct existing SPDX tagsQLogic QED drivers source code is dual licensed underGPL-2.0/BSD-3-Clause.Correct already existing but wrong SPDX tags to match the actuallicense.Signed-off-by: Alexander Lobakin Signed-off-by: Igor Russkikh Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

2528c389 - qed: Add support for tlv request processing.

Tue, 22 May 2018 07:28:38 +0000

qed: Add support for tlv request processing.The patch adds driver support for processing TLV requests/repsonsesfrom the mfw and upper driver layers respectively. The implementationreads the requested TLVs from the shared memory, requests the valuesfrom upper layer drivers, populates this info (TLVs) shared memory andnotifies MFW about the TLV values.Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Ariel Elior Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

f436baf3 - qed: Fix iWARP out of order flow

Tue, 17 Oct 2017 07:23:25 +0000

qed: Fix iWARP out of order flowOut of order flow is not working for iWARP.This patch got cut out from initial series that added outof order support for iWARP.Make out of order code common for iWARP and iSCSI.Add new configuration option CONFIG_QED_OOO. Set byqedr and qedi Kconfigs.Fixes: d1abfd0b4ee2 ("qed: Add iWARP out of order support")Signed-off-by: Michal Kalderon Signed-off-by: Manish Rangankar Signed-off-by: Ariel Elior Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

67b40dcc - qed: Implement iWARP initialization, teardown and qp operations

Sun, 02 Jul 2017 07:29:22 +0000

qed: Implement iWARP initialization, teardown and qp operationsThis patch adds iWARP support for flows that have common codebetween RoCE and iWARP, such as initialization, teardown andqp setup verbs: create, destroy, modify, query.It introduces the iWARP specific files qed_iwarp.[ch] andiwarp_common.hSigned-off-by: Michal Kalderon Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

b71b9afd - qed: Split rdma content between qed_rdma and qed_roce

Wed, 21 Jun 2017 13:22:45 +0000

qed: Split rdma content between qed_rdma and qed_roceThis patch places common iWARP / RoCE code in qed_rdmaand roce specific code in qed_roceThere is one new function ( qed_roce_setup ) added, the restof the patch removes content from the files and removes somestatic definitions.Signed-off-by: Michal Kalderon Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

1e128c81 - qed: Add support for hardware offloaded FCoE.

Wed, 15 Feb 2017 14:28:22 +0000

qed: Add support for hardware offloaded FCoE.This adds the backbone required for the various HW initalizationswhich are necessary for the FCoE driver (qedf) for QLogic FastLinQ4xxxx line of adapters - FW notification, resource initializations, etc.Signed-off-by: Arun Easi Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

c78c70fa - qed: Add infrastructure for PTP support

Wed, 15 Feb 2017 08:24:10 +0000

qed: Add infrastructure for PTP supportThe patch adds the required qed interfaces for configuring/readingthe PTP clock on the adapter.Signed-off-by: Sudarsana Reddy Kalluru Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

1d6cff4f - qed: Add iSCSI out of order packet handling.

Thu, 01 Dec 2016 08:21:07 +0000

qed: Add iSCSI out of order packet handling.This patch adds out of order packet handling for hardware offloadediSCSI. Out of order packet handling requires driver buffer allocationand assistance.Signed-off-by: Arun Easi Signed-off-by: Yuval Mintz Reviewed-by: Johannes Thumshirn Reviewed-by: Hannes Reinecke Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

fc831825 - qed: Add support for hardware offloaded iSCSI.

Thu, 01 Dec 2016 08:21:06 +0000

qed: Add support for hardware offloaded iSCSI.This adds the backbone required for the various HW initalizationswhich are necessary for the iSCSI driver (qedi) for QLogic FastLinQ4xxxx line of adapters - FW notification, resource initializations, etc.Signed-off-by: Arun Easi Signed-off-by: Yuval Mintz Reviewed-by: Johannes Thumshirn Reviewed-by: Hannes Reinecke Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

0189efb8 - qed*: Fix Kconfig dependencies with INFINIBAND_QEDR

Thu, 13 Oct 2016 19:57:02 +0000

qed*: Fix Kconfig dependencies with INFINIBAND_QEDRThe qedr driver would require a tristate Kconfig option [to allowit to compile as a module], and toward that end we've added theINFINIBAND_QEDR option. But as we've made the compilation of theqed/qede infrastructure required for RoCE dependent on the optionwe'd be facing linking difficulties in case that QED=y or QEDE=y,and INFINIBAND_QEDR=m.To resolve this, we seperate between the INFINIBAND_QEDR optionand the infrastructure support in qed/qede by introducing a newQED_RDMA option which would be selected by INFINIBAND_QEDR but wouldbe a boolean instead of a tristate; Following that, the qed/qede isfixed based on this new option so that all config combinations wouldbe supported.Fixes: cee9fbd8e2e9 ("qede: add qedr framework")Reported-by: Arnd Bergmann Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

51ff1725 - qed: Add support for RoCE hw init

Sat, 01 Oct 2016 18:59:57 +0000

qed: Add support for RoCE hw initThis adds the backbone required for the various HW initalizationswhich are necessary for the qedr driver - FW notification, resourceinitializations, etc.Signed-off-by: Ram Amrani Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile

0a7fb11c - qed: Add Light L2 support

Sat, 01 Oct 2016 18:59:55 +0000

qed: Add Light L2 supportOther protocols beside the networking driver need the abilityof passing some L2 traffic, usually [although not limited] for thepurpose of some management traffic.Signed-off-by: Yuval Mintz Signed-off-by: Ram Amrani Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/qlogic/qed/Makefile