Changes in Kconfig

5d93cfcf - net: dpaa: Convert to phylink

Mon, 17 Oct 2022 20:22:38 +0000

net: dpaa: Convert to phylinkThis converts DPAA to phylink. All macs are converted. This should workwith no device tree modifications (including those made in this series),except for QSGMII (as noted previously).The mEMAC configuration is one of the tricker areas. I have tried tocapture all the restrictions across the various models. Most of the time,we assume that if the serdes supports a mode or the phy-interface-modespecifies it, then we support it. The only place we can't do this is(RG)MII, since there's no serdes. In that case, we rely on a (new)devicetree property. There are also several cases where half-duplex isbroken. Unfortunately, only a single compatible is used for the MAC, so wehave to use the board compatible instead.The 10GEC conversion is very straightforward, since it only supports XAUI.There is generally nothing to configure.The dTSEC conversion is broadly similar to mEMAC, but is simpler because wedon't support configuring the SerDes (though this can be easily added) andwe don't have multiple PCSs. From what I can tell, there's nothingdifferent in the driver or documentation between SGMII and 1000BASE-Xexcept for the advertising. Similarly, I couldn't find anything about2500BASE-X. In both cases, I treat them like SGMII. These modes aren't usedby any in-tree boards. Similarly, despite being mentioned in the driver, Icouldn't find any documented SoCs which supported QSGMII. I have left itunimplemented for now.Signed-off-by: Sean Anderson Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/freescale/dpaa/Kconfig

f75d8155 - net: dpaa_eth: remove dead select in menuconfig FSL_DPAA_ETH

Thu, 12 Aug 2021 08:38:06 +0000

net: dpaa_eth: remove dead select in menuconfig FSL_DPAA_ETHThe menuconfig FSL_DPAA_ETH selects config FSL_FMAN_MAC, but the configFSL_FMAN_MAC never existed in the kernel tree.Hence, ./scripts/checkkconfigsymbols.py warns:FSL_FMAN_MACReferencing files: drivers/net/ethernet/freescale/dpaa/KconfigRemove this dead select in menuconfig FSL_DPAA_ETH.Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet")Signed-off-by: Lukas Bulwahn Acked-by: Madalin Bucur Signed-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/freescale/dpaa/Kconfig

a7f7f624 - treewide: replace '---help---' in Kconfig files with 'help'

Sat, 13 Jun 2020 16:50:22 +0000

treewide: replace '---help---' in Kconfig files with 'help'Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over'---help---'"), the number of '---help---' has been graduallydecreasing, but there are still more than 2400 instances.This commit finishes the conversion. While I touched the lines,I also fixed the indentation.There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---'In order to convert all of them to 1 tab + 'help', I ran thefollowing commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'Signed-off-by: Masahiro Yamada List of files: /linux-6.15/drivers/net/ethernet/freescale/dpaa/Kconfig

99352c79 - net: freescale: select CONFIG_FIXED_PHY where needed

Sat, 09 May 2020 12:04:52 +0000

net: freescale: select CONFIG_FIXED_PHY where neededI ran into a randconfig build failure with CONFIG_FIXED_PHY=mand CONFIG_GIANFAR=y:x86_64-linux-ld: drivers/net/ethernet/freescale/gianfar.o:(.rodata+0x418): undefined reference to `fixed_phy_change_carrier'It seems the same thing can happen with dpaa and ucc_geth, so changeall three to do an explicit 'select FIXED_PHY'.The fixed-phy driver actually has an alternative stub function thattheoretically allows building network drivers when fixed-phy isdisabled, but I don't see how that would help here, as the driverspresumably would not work then.Signed-off-by: Arnd Bergmann Acked-by: Florian Fainelli Signed-off-by: Jakub Kicinski List of files: /linux-6.15/drivers/net/ethernet/freescale/dpaa/Kconfig

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/net/ethernet/freescale/dpaa/Kconfig

708f0f4f - dpaa_eth: remove redundant dependency on FSL_SOC

Thu, 15 Dec 2016 13:13:05 +0000

dpaa_eth: remove redundant dependency on FSL_SOCSigned-off-by: Madalin Bucur Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/freescale/dpaa/Kconfig

9ad1a374 - dpaa_eth: add support for DPAA Ethernet

Tue, 15 Nov 2016 08:41:02 +0000

dpaa_eth: add support for DPAA EthernetThis introduces the Freescale Data Path Acceleration Architecture(DPAA) Ethernet driver (dpaa_eth) that builds upon the DPAA QMan,BMan, PAMU and FMan drivers to deliver Ethernet connectivity onthe Freescale DPAA QorIQ platforms.Signed-off-by: Madalin Bucur Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/net/ethernet/freescale/dpaa/Kconfig