Changes in Makefile

67def4ef - can: tcan4x5x: move regmap code into seperate file

Tue, 15 Dec 2020 23:17:34 +0000

can: tcan4x5x: move regmap code into seperate fileThis patch moves the regmap code into a seperate file.Reviewed-by: Dan Murphy Tested-by: Sean Nyekjaer Link: https://lore.kernel.org/r/20201215231746.1132907-5-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde List of files: /linux-6.15/drivers/net/can/m_can/Makefile

7813887e - can: tcan4x5x: rename tcan4x5x.c -> tcan4x5x-core.c

Tue, 15 Dec 2020 23:17:33 +0000

can: tcan4x5x: rename tcan4x5x.c -> tcan4x5x-core.cThis is a preparation patch to move the regmap related code into a seperatefile. This patch removes the tcan4x5x.c to tcan4x5x-core.c.Reviewed-by: Dan Murphy Tested-by: Sean Nyekjaer Link: https://lore.kernel.org/r/20201215231746.1132907-4-mkl@pengutronix.deSigned-off-by: Marc Kleine-Budde List of files: /linux-6.15/drivers/net/can/m_can/Makefile

cab7ffc0 - can: m_can: add PCI glue driver for Intel Elkhart Lake

Tue, 17 Nov 2020 16:08:27 +0000

can: m_can: add PCI glue driver for Intel Elkhart LakeAdd support for M_CAN controller on Intel Elkhart Lake attached to the PCI bus.It integrates the Bosch M_CAN controller with Message RAM and the wrapper IPblock with additional registers which all of them are within the same MMIOrange.Currently only interrupt control register from wrapper IP is used and the MRAMconfiguration is expected to come from the firmware via "bosch,mram-cfg" deviceproperty and parsed by m_can.c core.Initial implementation is done by Felipe Balbi while he was working at Intelwith later changes from Raymond Tan and me.Co-developed-by: Felipe Balbi (Intel) Co-developed-by: Raymond Tan Signed-off-by: Felipe Balbi (Intel) Signed-off-by: Raymond Tan Signed-off-by: Jarkko Nikula Link: https://lore.kernel.org/r/20201117160827.3636264-1-jarkko.nikula@linux.intel.comSigned-off-by: Marc Kleine-Budde List of files: /linux-6.15/drivers/net/can/m_can/Makefile

5443c226 - can: tcan4x5x: Add tcan4x5x driver to the kernel

Thu, 09 May 2019 16:11:08 +0000

can: tcan4x5x: Add tcan4x5x driver to the kernelAdd the TCAN4x5x SPI CAN driver.This device uses the Bosch MCAN IP core along with a SPI interface map.Register to the MCAN common core code to manage the MCAN IP.This device has a special method to indicate a write/read operation onthe data payload.Acked-by: Wolfgang Grandegger Signed-off-by: Dan Murphy Signed-off-by: Marc Kleine-Budde List of files: /linux-6.15/drivers/net/can/m_can/Makefile

f524f829 - can: m_can: Create a m_can platform framework

Thu, 09 May 2019 16:11:05 +0000

can: m_can: Create a m_can platform frameworkCreate a m_can platform framework that peripheraldevices can register to and use common code and register sets.The peripheral devices may provide read/write and configurationsupport of the IP.Acked-by: Wolfgang Grandegger Signed-off-by: Dan Murphy Acked-by: Faiz Abbas Signed-off-by: Marc Kleine-Budde List of files: /linux-6.15/drivers/net/can/m_can/Makefile

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/net/can/m_can/Makefile

e0d1f481 - can: m_can: add Bosch M_CAN controller support

Wed, 16 Jul 2014 09:30:50 +0000

can: m_can: add Bosch M_CAN controller supportThe patch adds the basic CAN TX/RX function support for Bosch M_CAN controller.For TX, only one dedicated tx buffer is used for sending data.For RX, RXFIFO 0 is used for receiving data to avoid overflow.Rx FIFO 1 and Rx Buffers are not used currently, as well as Tx Event FIFO.Due to the message ram can be shared by multi m_can instancesand the fifo element is configurable which is SoC dependant,the design is to parse the message ram related configuration data from devicetree rather than hardcode define it in driver which can make the messageram sharing fully transparent to M_CAN controller driver,then we can gain better driver maintainability and future features upgrade.M_CAN also supports CANFD protocol features like data payload up to 64 bytesand bitrate switch at runtime, however, this patch still does not add thesupport for these features.Cc: Wolfgang Grandegger Cc: Marc Kleine-Budde Cc: Mark Rutland Cc: Oliver Hartkopp Cc: Varka Bhadram Signed-off-by: Dong Aisheng Reviewed-by: Varka Bhadram Signed-off-by: Fengguang Wu [mkl: Squahed semicolon cleanup by Fengguang Wu]Signed-off-by: Marc Kleine-Budde List of files: /linux-6.15/drivers/net/can/m_can/Makefile