en Copyright 2015 Java http://172.16.0.5:8080/history/linux-6.15/drivers/misc/keba/Makefile#366898e7 misc: keba: Add LAN9252 driverKEBA CP500 devices use the LAN9252 controller for EtherCATcommunication. For a stable Ethernet link the PHY registers of thecontroller need to be configured correctly. This driver configures thesePHY registers as required.Signed-off-by: Gerhard Engleder <eg@keba.com>Link: https://lore.kernel.org/r/20241011191257.19702-5-gerhard@engleder-embedded.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> List of files: /linux-6.15/drivers/misc/keba/Makefile Fri, 11 Oct 2024 19:12:53 +0000 Gerhard Engleder <eg@keba.com> http://172.16.0.5:8080/history/linux-6.15/drivers/misc/keba/Makefile#a1944676 misc: keba: Add basic KEBA CP500 system FPGA supportThe KEBA CP500 system FPGA is a PCIe device, which consists of multipleIP cores. Every IP core has its own auxiliary driver. The cp500 driverregisters an auxiliary device for each device and the correspondingdrivers are loaded by the Linux driver infrastructure.Currently 3 variants of this device exists. Every variant has its ownPCI device ID, which is used to determine the list of available IPcores. In this first version only the auxiliary device for the I2Ccontroller is registered.Besides the auxiliary device registration some other basic functions ofthe FPGA are implemented; e.g, FPGA version sysfs file, keep FPGAconfiguration on reset sysfs file, error message for errors on theinternal AXI bus of the FPGA.Signed-off-by: Gerhard Engleder <eg@keba.com>Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> List of files: /linux-6.15/drivers/misc/keba/Makefile Sun, 30 Jun 2024 19:47:39 +0000 Gerhard Engleder <eg@keba.com>