Changes in Makefile

de646852 - media: move ttpci-eeprom to common

Mon, 31 May 2021 15:05:45 +0000

media: move ttpci-eeprom to commonThe ttpci-eeprom is actually an independent driver thatdoesn't depend on the stuff under drivers/media/pci/ttpci/.Also, it is used by an USB driver (pctv452e).So, move it to the common directory.Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

e478d405 - media: cxusb: add analog mode support for Medion MD95700

Mon, 29 Apr 2019 16:16:58 +0000

media: cxusb: add analog mode support for Medion MD95700This patch adds support for analog part of Medion 95700 in the cxusbdriver.What works:* Video capture at various sizes with sequential fields,* Input switching (TV Tuner, Composite, S-Video),* TV and radio tuning,* Video standard switching and auto detection,* Radio mode switching (stereo / mono),* Unplugging while capturing,* DVB / analog coexistence.What does not work yet:* Audio,* VBI,* Picture controls.Signed-off-by: Maciej S. Szmigiero Signed-off-by: Hans Verkuil [hverkuil-cisco@xs4all.nl: remove left-over commented-out debug message]Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

b30cc07d - media: dvb-usb/friio, dvb-usb-v2/gl861: decompose friio and merge with gl861

Sun, 10 Jun 2018 14:45:31 +0000

media: dvb-usb/friio, dvb-usb-v2/gl861: decompose friio and merge with gl861Friio device contains "gl861" bridge and "tc90522" demod,for which the separate drivers are already in the kernel.But friio driver was monolithic and did not use them,practically copying those features.This patch decomposes friio driver into sub drivers andre-uses existing ones, thus reduces some code.It adds some features to gl861,to support the friio-specific init/config of the devicesand implement i2c communications to the tuner via demodwith USB vendor requests.[mchehab+samsung@kernel.org: fix merge conflicts]Signed-off-by: Akihiro Tsukada Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

fada1935 - media: move dvb kAPI headers to include/media

Thu, 28 Dec 2017 18:03:51 +0000

media: move dvb kAPI headers to include/mediaExcept for DVB, all media kAPI headers are at include/media.Move the headers to it.Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

7a0786c1 - gp8psk: Fix DVB frontend attach

Sat, 12 Nov 2016 14:46:28 +0000

gp8psk: Fix DVB frontend attachThe DVB binding schema at the DVB core assumes that the frontend is aseparate driver. Faling to do that causes OOPS when the module isremoved, as it tries to do a symbol_put_addr on an internal symbol,causing craches like: WARNING: CPU: 1 PID: 28102 at kernel/module.c:1108 module_put+0x57/0x70 Modules linked in: dvb_usb_gp8psk(-) dvb_usb dvb_core nvidia_drm(PO) nvidia_modeset(PO) snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd soundcore nvidia(PO) [last unloaded: rc_core] CPU: 1 PID: 28102 Comm: rmmod Tainted: P WC O 4.8.4-build.1 #1 Hardware name: MSI MS-7309/MS-7309, BIOS V1.12 02/23/2009 Call Trace: dump_stack+0x44/0x64 __warn+0xfa/0x120 module_put+0x57/0x70 module_put+0x57/0x70 warn_slowpath_null+0x23/0x30 module_put+0x57/0x70 gp8psk_fe_set_frontend+0x460/0x460 [dvb_usb_gp8psk] symbol_put_addr+0x27/0x50 dvb_usb_adapter_frontend_exit+0x3a/0x70 [dvb_usb]From Derek's tests: "Attach bug is fixed, tuning works, module unloads without crashing. Everything seems ok!"Reported-by: Derek Tested-by: Derek Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

e91455a1 - [media] dvb-usb: split out common parts of dibusb

Tue, 19 Jul 2016 15:14:34 +0000

[media] dvb-usb: split out common parts of dibusbTha ARM randconfig builds came up with another rare build failurefor the dib3000mc driver, when dvb-usb-dibusb-mb is built-in anddib3000mc is a loadable module:ERROR: "dibusb_dib3000mc_frontend_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!ERROR: "dibusb_dib3000mc_tuner_attach" [drivers/media/usb/dvb-usb/dvb-usb-nova-t-usb2.ko] undefined!Apparently this used to be a valid configuration (build-time, notrun-time), but broke as part of a cleanup.I tried reverting the cleanup, but saw that the code was still wrongthen. This tries to fix the code properly, by moving the problematicfunctions into a new file that now is built as a loadable module orbuilt-in, whichever is correct for a particular configuration. It fixesthe regression as well as the runtime problem that already existed.The new module dependency chain is now: dvb-usb-{dibusb_mc,a800,dib0700,umt-010,gp8psk} dvb-usb-dibusb-mb | | | | dvb-usb-dibusb-mc-common | ___________| | | | | | | dib3000mc (frontend) | | | dib3000mb (frontend) | | | | | | dvb-usb-dibusb-commonI have also checked the two other files that were changed in the originalcleanup, and found them to be correct in either version, so I do nottouch that part.As this is a rather obscure bug, there is no need for backports.Fixes: 028c70ff42783 ("[media] dvb-usb/dvb-usb-v2: use IS_ENABLED")Signed-off-by: Arnd Bergmann Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

88f8472c - [media] Fix some Makefile rules

Thu, 16 Aug 2012 19:57:21 +0000

[media] Fix some Makefile rulesOn a few places, := were using instead of +=, causing drivers tonot compile.While here, standardize the usage of += on all cases where multiplelines are needed, and for obj-y/obj-m targets, and := when just oneline is needed, on -obj rules.Reported-by: Hans Verkuil Identified-by: Antti Polosaari Tested-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

ccae7af2 - [media] common: move media/common/tuners to media/tuners

Thu, 14 Jun 2012 19:35:59 +0000

[media] common: move media/common/tuners to media/tunersMove the tuners one level up, as the "common" directory will be usedby drivers that are shared between more than one driver.Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

25aee3de - [media] Rename media/dvb as media/pci

Thu, 14 Jun 2012 19:35:57 +0000

[media] Rename media/dvb as media/pciThe remaining dvb drivers are pci, so rename them to match thebus.Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile

786baecf - [media] dvb-usb: move it to drivers/media/usb/dvb-usb

Thu, 14 Jun 2012 19:35:56 +0000

[media] dvb-usb: move it to drivers/media/usb/dvb-usbAs media/dvb will be removed, move it to a proper place.Signed-off-by: Mauro Carvalho Chehab List of files: /linux-6.15/drivers/media/usb/dvb-usb/Makefile