Changes in Makefile

7b7e50f8 - leds: Add NCP5623 multi-led driver

Tue, 05 Mar 2024 04:20:29 +0000

leds: Add NCP5623 multi-led driverNCP5623 is DC-DC multi-LEDs driver which has three PWMs that can beprogrammed up to 32 steps giving 32768 colors hue.NCP5623 driver supports gradual dimming upward/downward with programmabledelays. Also, the driver supports driving a single LED or multi-LEDlike RGB.Signed-off-by: Abdel Alkuor Link: https://lore.kernel.org/r/20240305042049.1533279-2-alkuor@gmail.comSigned-off-by: Lee Jones List of files: /linux-6.15/drivers/leds/rgb/Makefile

0ebdb721 - leds: Add ktd202x driver

Mon, 02 Oct 2023 16:48:28 +0000

leds: Add ktd202x driverThis commit adds support for Kinetic KTD2026/7 RGB/White LED driver.Signed-off-by: André Apitzsch Link: https://lore.kernel.org/r/20231002-ktd202x-v6-2-26be8eefeb88@apitzsch.euSigned-off-by: Lee Jones List of files: /linux-6.15/drivers/leds/rgb/Makefile

37d0849e - leds: rgb: Add a multicolor LED driver to group monochromatic LEDs

Fri, 28 Jul 2023 15:37:31 +0000

leds: rgb: Add a multicolor LED driver to group monochromatic LEDsGrouping multiple monochrome LEDs into a multicolor LED device has a fewbenefits over handling the group in user-space:- The state of the LEDs relative to each other is consistent. In other words, if 2 threads competes to set the LED to green and red, the end-result cannot be black or yellow.- The multicolor LED as a whole can be driven through the sysfs LED interface.Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Lee Jones Link: https://lore.kernel.org/r/20230728153731.3742339-5-jjhiblot@traphandler.comSigned-off-by: Lee Jones List of files: /linux-6.15/drivers/leds/rgb/Makefile

5c38376e - leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support

Fri, 10 Mar 2023 06:55:55 +0000

leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator supportThe MediaTek MT6370 is a highly-integrated smart power management IC,which includes a single cell Li-Ion/Li-Polymer switching batterycharger, a USB Type-C & Power Delivery (PD) controller, dualFlash LED current sources, a RGB LED driver, a backlight WLED driver,a display bias driver and a general LDO for portable devices.Add support for the MediaTek MT6370 Current Sink Type LED Indicatordriver. It can control four channels current-sink RGB LEDs with 3 modes:constant current, PWM, and breath mode.Co-developed-by: Alice Chen Signed-off-by: Alice Chen Signed-off-by: ChiYuan Huang Signed-off-by: ChiaEn Wu Acked-by: Jacek Anaszewski Signed-off-by: Lee Jones Link: https://lore.kernel.org/r/1df93a583c3f508a7158b83b95857e9bce235e1b.1678430444.git.chiaen_wu@richtek.com List of files: /linux-6.15/drivers/leds/rgb/Makefile

818d03b3 - leds: Move pwm-multicolor driver into rgb directory

Wed, 04 May 2022 18:49:46 +0000

leds: Move pwm-multicolor driver into rgb directoryThe drivers/leds/rgb subdirectory is relatively fresh, so we move thisnew PWM multi-color driver into it.Signed-off-by: Sven Schwermer Signed-off-by: Pavel Machek List of files: /linux-6.15/drivers/leds/rgb/Makefile

24e2d05d - leds: Add driver for Qualcomm LPG

Thu, 03 Mar 2022 21:43:00 +0000

leds: Add driver for Qualcomm LPGThe Light Pulse Generator (LPG) is a PWM-block found in a wide range ofPMICs from Qualcomm. These PMICs typically comes with 1-8 LPG instances,with their output being routed to various other components, such ascurrent sinks or GPIOs.Each LPG instance can operate on fixed parameters or based on a sharedlookup-table, altering the duty cycle over time. This provides the meansfor hardware assisted transitions of LED brightness.A typical use case for the fixed parameter mode is to drive a PWMbacklight control signal, the driver therefor allows each LPG instanceto be exposed to the kernel either through the LED framework or the PWMframework.A typical use case for the LED configuration is to drive RGB LEDs insmartphones etc, for which the driver supports multiple channels to beganged up to a MULTICOLOR LED. In this configuration the patterngenerators will be synchronized, to allow for multi-color patterns.The idea of modelling this as a LED driver ontop of a PWM driver wasconsidered, but setting the properties related to patterns does not fitin the PWM API. Similarly the idea of just duplicating the lower bits ina PWM and LED driver separately was considered, but this would not allowthe PWM channels and LEDs to be configured on a per-board basis. Thedriver implements the more complex LED interface, and provides a PWMinterface on the side of that, in the same driver.Signed-off-by: Bjorn Andersson Tested-by: Douglas Anderson Tested-by: Luca Weiss Reviewed-by: Marijn Suijten Tested-by: Marijn Suijten [On the Sony Xperia Nile Discovery, SDM630]Signed-off-by: Pavel Machek List of files: /linux-6.15/drivers/leds/rgb/Makefile