Changes in Makefile

f59aba2f - isdn: capi: dead code removal

Tue, 10 Dec 2019 20:59:16 +0000

isdn: capi: dead code removalThe staging isdn drivers are gone, and CONFIG_BT_CMTP is nowthe only user. This means a lot of the code in the subsystemhas no remaining callers and can be removed.Change the capi user space front-end to be part of kernelcapi,and the combined module to only be compiled if BT_CMTP isalso enabled, then remove the interfaces that have no remainingcallers.As the notifier list and the capi_drivers list have no callersoutside of kcapi.c, the implementation gets much simpler.Some definitions from the include/linux/*.h headers are onlyneeded internally and are moved to kcapi.h.Acked-by: David Miller Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20191210210455.3475361-2-arnd@arndb.deSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/isdn/Makefile

6d979850 - isdn: move capi drivers to staging

Sat, 20 Apr 2019 20:28:45 +0000

isdn: move capi drivers to stagingI tried to find any indication of whether the capi drivers are still inuse, and have not found anything from a long time ago.With public ISDN networks almost completely shut down over the past 12months, there is very little you can actually do with this hardware. Themain remaining use case would be to connect ISDN voice phones to anin-house installation with Asterisk or LCR, but anyone trying this inturn seems to be using either the mISDN driver stack, or out-of-treedrivers from the hardware vendors.I may of course have missed something, so I would suggest moving thesethree drivers (avm, hysdn, gigaset) into drivers/staging/ just in casesomeone still uses them.If nobody complains, we can remove them entirely in six months, orotherwise move the core code and any drivers that are still needed backinto drivers/isdn.As Paul Bolle notes, he is still testing the gigaset driver as long ashe can, but the Dutch ISDN network will be shut down in September 2019,which puts an end to that.Marcel Holtmann still maintains the Bluetooth CMTP profile and wants tokeep that alive, so the actual CAPI subsystem code remains in place fornow, after all other drivers are gone, CMTP and CAPI can be merged intoa single driver directory.Cc: Marcel Holtmann Cc: Paul Bolle Signed-off-by: Arnd Bergmann List of files: /linux-6.15/drivers/isdn/Makefile

99c2aa15 - isdn: hdlc: move into mISDN

Thu, 18 Apr 2019 20:57:08 +0000

isdn: hdlc: move into mISDNThe last remnant of the isdn4linux interface is now the isdnhdlcsupport, used by the netjet driver. Move it next to that driver.Signed-off-by: Arnd Bergmann List of files: /linux-6.15/drivers/isdn/Makefile

9c3c0c20 - isdn: remove isdn4linux

Thu, 18 Apr 2019 20:43:36 +0000

isdn: remove isdn4linuxWith all isdn4linux hardware drivers gone, this is only a wrapper aroundCAPI to support old user space. However, from looking at the mailinglist, it seems that the last time anyone asked about it was in 2014,when the upgrade from a linux-2.4 installation failed, and mISDN wassuggested as a replacement.The largest public ISDN network (Deutsche Telekom) was supposed to beshut down 2018, which must have drastically reduced the number of legacyinstallations.When we last discussed removing i4l in 2016, Karsten Keil suggestedrevisiting this in 2018. I guess this is overdue.Link: http://listserv.isdn4linux.de/pipermail/isdn4linux/2014-October/006165.htmlLink: https://patchwork.kernel.org/patch/8484861/#17900371Link: https://listserv.isdn4linux.de/pipermail/isdn4linux/2019-April/thread.htmlSigned-off-by: Arnd Bergmann List of files: /linux-6.15/drivers/isdn/Makefile

85993b8c - isdn: remove hisax driver

Thu, 18 Apr 2019 20:47:35 +0000

isdn: remove hisax driverWith the decline of ISDN, this seems to have become almost completelyobsolete, and even in the past years before that, almost all remainingusers appear to have used mISDN instead.Birger Harzenetter noted that he is still using i4l/hisax to takeadvantage of the 'divert' driver for call diversion, but otherwise usesmISDN on the same hardware. This is a rare edge case as far as Ican tell, but we are still breaking an actively used work flow(see https://xkcd.com/1172/).We debated moving i4l/hisax to staging as an intermediate step, but ashe is not likely to change the setup, and that would just delay breakingthis use case. The alternatives here are to stay on stable kernels< 5.2, to create an external driver repository for isdn4linux, or toadd divert functionality to mISDN.Cc: Birger Harzenetter Signed-off-by: Arnd Bergmann List of files: /linux-6.15/drivers/isdn/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/isdn/Makefile

a921e9bd - isdn: i4l: move active-isdn drivers to staging

Wed, 02 Mar 2016 19:06:46 +0000

isdn: i4l: move active-isdn drivers to stagingThe icn, act2000 and pcbit drivers are all for very old hardware,and it is highly unlikely that anyone is actually still using themon modern kernels, if at all.All three drivers apparently are for hardware that predates PCIbeing the common connector, as they are ISA-only and activePCI ISDN cards were widely available in the 1990s.Looking through the git logs, it I cannot find any indication of apatch to any of these drivers that has been tested on real hardware,only cleanups or global API changes.Signed-off-by: Arnd Bergmann Acked-by: Karsten Keil Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/isdn/Makefile

6cc56834 - isdn: remove spellcaster driver

Mon, 30 Nov 2015 10:34:09 +0000

isdn: remove spellcaster driverThe 'sc' ISDN driver relies on using readl() to access ISA I/O memory.This has been deprecated and produced warnings since linux-2.3.23,disabled by default since 2.4.10 and finally removed in 2.6.5.I found this because the compiling the driver for ARM producesa warning:In file included from ../drivers/isdn/sc/includes.h:8:0, from ../drivers/isdn/sc/init.c:13:../arch/arm/include/asm/io.h:115:21: note: expected 'const volatile void *' but argument is of type 'long unsigned int'It is pretty clear that this driver has not been used for a long timeand there is no point fixing it now, so let's remove it.Signed-off-by: Arnd Bergmann Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/isdn/Makefile

780aefed - mISDN fix main ISDN Makefile

Tue, 29 Jul 2008 16:47:22 +0000

mISDN fix main ISDN MakefileCompile hardware directory independent from selectingCAPI support.Signed-off-by: Karsten Keil List of files: /linux-6.15/drivers/isdn/Makefile

e4ac9bc1 - Add mISDN driver

Sat, 26 Jul 2008 16:52:11 +0000

Add mISDN drivermISDN is a new modular ISDN driver, in the long term it should replacethe old I4L driver architecture for passiv ISDN cards.Signed-off-by: Karsten Keil List of files: /linux-6.15/drivers/isdn/Makefile

0a34eb8f - [PATCH] isdn4linux: Siemens Gigaset drivers - Kconfigs and Makefiles

Sun, 26 Mar 2006 09:38:28 +0000

[PATCH] isdn4linux: Siemens Gigaset drivers - Kconfigs and MakefilesAnd: Tilman Schmidt The following patches add drivers for the Siemens Gigaset 3070 family of ISDNDECT PABXes connected via USB, either directly or over a DECT link using aGigaset M105 or compatible DECT data adapter. The devices are integrated asISDN adapters within the isdn4linux framework, supporting incoming andoutgoing voice and data connections, and also as tty devices providing accessto device specific AT commands.Supported devices include models 3070, 3075, 4170, 4175, SX205, SX255, andSX353 from the Siemens Gigaset product family, as well as the technicallyidentical models 45isdn and 721X from the Deutsche Telekom Sinus series.Supported DECT adapters are the Gigaset M105 data and the technicallyidentical Gigaset USB Adapter DECT, Sinus 45 data 2, and Sinus 721 data (butnot the Gigaset M34 and Sinus 702 data which advertise themselves as CDC-ACMdevices).These drivers have been developed over the last four years within theSourceForge project http://sourceforge.net/projects/gigaset307x/. They arebeing used successfully in several installations for dial-in Internet accessand for voice call switching with Asterisk.This is our second attempt at submitting these drivers, taking into accountthe comments we received to our first submission on 2005-12-11.The patch set adds three kernel modules:- a common module "gigaset" encapsulating the common logic for controlling the PABX and the interfaces to userspace and the isdn4linux subsystem.- a connection-specific module "bas_gigaset" which handles communication with the PABX over a direct USB connection.- a connection-specific module "usb_gigaset" which does the same for a DECT connection using the Gigaset M105 USB DECT adapter.We also have a module "ser_gigaset" which supports the Gigaset M101 RS232 DECTadapter, but we didn't judge it fit for inclusion in the kernel, as it doesdirect programming of a i8250 serial port. It should probably be rewritten asa serial line discipline but so far we lack the neccessary knowledge aboutwriting a line discipline for that.The drivers have been working with kernel releases 2.2 and 2.4 as well as 2.6,and although we took efforts to remove the compatibility code for thissubmission, it probably still shows in places. Please make allowances.This patch:Prepare the kernel build infrastructure for addition of the Gigaset ISDNdrivers. It creates a Makefile and Kconfig file for the Gigaset driver andhooks them into those of the isdn4linux subsystem. It also adds a MAINTAINERSentry for the driver.This patch depends on patches 2 to 9 of the present set, as without the actualsource files, activating the options added here will cause the kernel build tofail.Signed-off-by: Hansjoerg Lipp Signed-off-by: Tilman Schmidt Cc: Karsten Keil Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/isdn/Makefile

1da177e4 - Linux-2.6.12-rc2

Sat, 16 Apr 2005 22:20:36 +0000

Linux-2.6.12-rc2Initial git repository build. I'm not bothering with the full history,even though we have it. We can create a separate "historical" gitarchive of that later if we want to, and in the meantime it's about3.2GB when imported into git - space that would just make the earlygit days unnecessarily complicated, when we don't have a lot of goodinfrastructure for it.Let it rip! List of files: /linux-6.15/drivers/isdn/Makefile