Changes in eeti_ts.c

5f60d5f6 - move asm/unaligned.h to linux/unaligned.h

Tue, 01 Oct 2024 19:35:57 +0000

move asm/unaligned.h to linux/unaligned.hasm/unaligned.h is always an include of asm-generic/unaligned.h;might as well move that thing to linux/unaligned.h and includethat - there's nothing arch-specific in that header.auto-generated by the following:for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $idonefor i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $idonegit mv include/asm-generic/unaligned.h include/linux/unaligned.hgit mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.hsed -i -e "/unaligned.h/d" include/asm-generic/Kbuildsed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

5852f2af - Input: drop explicit initialization of struct i2c_device_id::driver_data to 0

Thu, 09 May 2024 17:41:59 +0000

Input: drop explicit initialization of struct i2c_device_id::driver_data to 0These drivers don't use the driver_data member of struct i2c_device_id,so don't explicitly initialize this member.This prepares putting driver_data in an anonymous union which requireseither no initialization or named designators. But it's also a nicecleanup on its own.While add it, also remove commas after the sentinel entries.Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20240509174158.2211071-2-u.kleine-koenig@pengutronix.deSigned-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

d8bde56d - Input: Switch i2c drivers back to use .probe()

Wed, 17 May 2023 16:55:42 +0000

Input: Switch i2c drivers back to use .probe()After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()call-back type"), all drivers being converted to .probe_new() and then03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convertback to (the new) .probe() to be able to eventually drop .probe_new() fromstruct i2c_driver.Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20230517164645.162294-1-u.kleine-koenig@pengutronix.deSigned-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

993d854c - Input: eeti_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()

Mon, 02 Jan 2023 18:18:15 +0000

Input: eeti_ts - switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()SIMPLE_DEV_PM_OPS() is deprecated as it requires explicit protectionagainst unused function warnings. The new combination of pm_sleep_ptr()and DEFINE_SIMPLE_DEV_PM_OPS() allows the compiler to see the functions,thus suppressing the warning, but still allowing the unused code to beremoved. Thus also drop the __maybe_unused markings.Signed-off-by: Jonathan Cameron Cc: Daniel Mack Reviewed-by: Linus Walleij Link: https://lore.kernel.org/r/20230102181842.718010-43-jic23@kernel.orgSigned-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

923366e9 - Input: eeti_ts - Convert to i2c's .probe_new()

Fri, 18 Nov 2022 22:39:32 +0000

Input: eeti_ts - Convert to i2c's .probe_new()The probe function doesn't make use of the i2c_device_id * parameter so itcan be trivially converted.Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20221118224540.619276-239-uwe@kleine-koenig.orgSigned-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

d69f0a43 - Input: use input_device_enabled()

Mon, 05 Oct 2020 04:16:07 +0000

Input: use input_device_enabled()Use the newly added helper in relevant input drivers.Signed-off-by: Andrzej Pietrasiewicz Link: https://lore.kernel.org/r/20200608112211.12125-3-andrzej.p@collabora.comSigned-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

736e67ba - treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 160

Mon, 27 May 2019 06:55:09 +0000

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 160Based on 1 normalized pattern(s): this file is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this file is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this library if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usaextracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-laterhas been chosen to replace the boilerplate/reference in 1 file(s).Signed-off-by: Thomas Gleixner Reviewed-by: Kate Stewart Reviewed-by: Richard Fontana Reviewed-by: Allison Randal Reviewed-by: Armijn Hemel Cc: linux-spdx@vger.kernel.orgLink: https://lkml.kernel.org/r/20190527070033.475087903@linutronix.deSigned-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

b283d0c3 - Input: eeti_ts - read hardware state once after wakeup

Tue, 07 May 2019 03:03:46 +0000

Input: eeti_ts - read hardware state once after wakeupFor systems in which the touch IRQ is acting as wakeup source, and that donot support level-driven interrupts, the interrupt controller might notlatch the GPIO IRQ during sleep. In such cases, the interrupt will neveroccur again after resume, hence the touch screen appears dead.To fix this, check for the assertion of the attn gpio, and read form thecontroller once in the resume path to read the hardware status andto arm the IRQ again.Introduce a mutex to guard eeti_ts_read() against parallel invocationsfrom different contexts.Signed-off-by: Daniel Mack Reported-by: Sven Neumann Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

fd8135b6 - Input: eeti - fix link to documentation and email address in header

Wed, 04 Jul 2018 15:46:55 +0000

Input: eeti - fix link to documentation and email address in headerKeep the documentation link up-to-date in case anybody need to dive into itagain, and update email address while at it.Signed-off-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

a114cbd0 - Input: eeti - drop module parameters, parse DT properties

Wed, 04 Jul 2018 15:46:22 +0000

Input: eeti - drop module parameters, parse DT propertiesThe only user of this driver in mainline does not make use of the moduleparameters, so let's remove them. All properties for this driver should beset through DT or pdata.Use touchscreen_parse_properties() to automatically set some of the commontouchscreen properties and derive the axis inversion through that.And finally, use touchscreen_report_pos() to handle the DT propertiesautomatically instead of doing the inversion ourselves.Signed-off-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

e32d7f1b - Input: eeti - add device tree matching table

Wed, 04 Jul 2018 15:45:47 +0000

Input: eeti - add device tree matching tableProvide a match table so that the driver can be used in devicetree setups.More properties are added in a later patch.Signed-off-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

d99caa47 - Input: eeti_ts - switch to gpiod API

Mon, 20 Feb 2017 01:21:56 +0000

Input: eeti_ts - switch to gpiod APIgpiod API allows standard way of specifying GPIO polarity and takes it intoaccount when reading or setting GPIO state. It also allows us to switch tocommon way of obtaining GPIO descriptor and away form legacy platform data.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

d422be5f - Input: eeti_ts - expect platform code to set interrupt trigger

Mon, 20 Feb 2017 00:22:13 +0000

Input: eeti_ts - expect platform code to set interrupt triggerInstead of keying interrupt trigger off GPIO polarity, let's rely onplatform code to set it up properly for us.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

0378008a - Input: eeti_ts - switch to using threaded interrupt

Mon, 20 Feb 2017 01:23:47 +0000

Input: eeti_ts - switch to using threaded interruptInstead of having standard interrupt handler and manually firing work itemto perform I2C reads, let's switch to threaded interrupts, which weredesigned specifically for this purpose.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

173e4d81 - Input: eeti_ts - use gpio_get_value_cansleep

Tue, 21 Feb 2017 07:13:45 +0000

Input: eeti_ts - use gpio_get_value_cansleepWe are reading GPIO state in a non-atomic context (workqueue), so we canuse "cansleep" variant, and thus make the driver available on systems whereGPIO controllers require sleeping when reading GPIO state.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

2d388499 - Input: eeti_ts - respect interrupt set in client structure

Mon, 20 Feb 2017 01:14:33 +0000

Input: eeti_ts - respect interrupt set in client structureInstead of expecting that GPIO is always interrupt source, let's useinterrupt specified in I2C client.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

6f9fab69 - Input: eeti_ts - switch to using managed resources

Fri, 17 Feb 2017 23:54:22 +0000

Input: eeti_ts - switch to using managed resourcesUsing devm_* APIs simpifies error handling and device teardown.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

42e02a6a - Input: eeti_ts - use input_set_capability()

Tue, 21 Feb 2017 05:53:51 +0000

Input: eeti_ts - use input_set_capability()Use input_set_capability() instead of manipulating evbit/keybitmasks directly.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

e9f66cdb - Input: eeti_ts - use get_unaligned_be16() to retrieve data

Tue, 21 Feb 2017 05:50:13 +0000

Input: eeti_ts - use get_unaligned_be16() to retrieve dataInstead of manually converting big endian data on wire into hostendianness, let's use helpers to do that for us. It might save usa few cycles if host endianness matches what's on wire.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c

272c03bb - Input: eeti_ts - use BIT(n)

Tue, 21 Feb 2017 05:42:43 +0000

Input: eeti_ts - use BIT(n)Use idiomatic BIT(n) to form single-bit masks.Reviewed-by: Daniel Mack Signed-off-by: Dmitry Torokhov List of files: /linux-6.15/drivers/input/touchscreen/eeti_ts.c