Changes in Makefile

5659785a - iio: frequency: admfm2000: New driver

Tue, 23 Jan 2024 08:10:59 +0000

iio: frequency: admfm2000: New driverDual microwave down converter module with input RF and LO frequencyranges from 0.5 to 32 GHz and an output IF frequency range from 0.1 to8 GHz. It consists of a LNA, mixer, IF filter, DSA, and IF amplifierfor each down conversion path.Signed-off-by: Kim Seer Paller Link: https://lore.kernel.org/r/20240123081059.5746-2-kimseer.paller@analog.comSigned-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

eda549e2 - iio: frequency: adf4377: add support for ADF4377

Tue, 15 Nov 2022 11:00:41 +0000

iio: frequency: adf4377: add support for ADF4377The ADF4377 is a high performance, ultralow jitter, dual output integer-Nphased locked loop (PLL) with integrated voltage controlled oscillator(VCO) ideally suited for data converter and mixed signal front end (MxFE)clock applications.Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4377.pdfSigned-off-by: Antoniu Miclaus Reviewed-by: Nuno Sá Link: https://lore.kernel.org/r/20221115110041.71495-2-antoniu.miclaus@analog.comSigned-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

b59c0415 - iio: frequency: admv4420.c: Add support for ADMV4420

Wed, 23 Feb 2022 13:08:08 +0000

iio: frequency: admv4420.c: Add support for ADMV4420Add support for K Band Downconverter with IntegratedFractional-N PLL and VCO.More info:https://www.analog.com/en/products/admv4420.htmlSigned-off-by: Cristian Pop Link: https://lore.kernel.org/r/20220223130808.13352-2-cristian.pop@analog.comSigned-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

f4eb9ac7 - iio: frequency: admv1014: add support for ADMV1014

Tue, 15 Feb 2022 08:12:13 +0000

iio: frequency: admv1014: add support for ADMV1014The ADMV1014 is a silicon germanium (SiGe), wideband,microwave downconverter optimized for point to point microwaveradio designs operating in the 24 GHz to 44 GHz frequency range.Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1014.pdfSigned-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20220215081216.67706-1-antoniu.miclaus@analog.comSigned-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

da35a7b5 - iio: frequency: admv1013: add support for ADMV1013

Tue, 21 Dec 2021 11:22:04 +0000

iio: frequency: admv1013: add support for ADMV1013The ADMV1013 is a wideband, microwave upconverter optimizedfor point to point microwave radio designs operating in the24 GHz to 44 GHz radio frequency (RF) range.Datasheet:https://www.analog.com/media/en/technical-documentation/data-sheets/ADMV1013.pdfSigned-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20211221112206.97066-1-antoniu.miclaus@analog.comSigned-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

63aaf6d0 - iio: frequency: adrf6780: add support for ADRF6780

Thu, 21 Oct 2021 11:32:43 +0000

iio: frequency: adrf6780: add support for ADRF6780The ADRF6780 is a silicon germanium (SiGe) design, wideband,microwave upconverter optimized for point to point microwaveradio designs operating in the 5.9 GHz to 23.6 GHz frequencyrange.Datasheet:https://www.analog.com/media/en/technical-documentation/data-sheets/ADRF6780.pdfSigned-off-by: Antoniu Miclaus Link: https://lore.kernel.org/r/20211021113244.56936-1-antoniu.miclaus@analog.comSigned-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

7f699bd1 - iio: frequency: adf4371: Add support for ADF4371 PLL

Tue, 04 Jun 2019 14:58:02 +0000

iio: frequency: adf4371: Add support for ADF4371 PLLThe ADF4371 is a frequency synthesizer with an integrated voltagecontrolled oscillator (VCO) for phase-locked loops (PLLs). The ADF4371has an integrated VCO with a fundamental output frequency ranging from4000 MHz to 8000 MHz. In addition, the VCO frequency is connected todivide by 1, 2, 4, 8, 16, 32, or 64 circuits that allows the user togenerate radio frequency (RF) output frequencies as low as 62.5 MHz atRF8x. A frequency multiplier at RF16x generates from 8 GHz to 16 GHz. Afrequency quadrupler generates frequencies from 16 GHz to 32 GHz at RF32x.RFAUX8x duplicates the frequency range of RF8x or permits direct access tothe VCO output.The driver takes the reference input frequency from the device tree anduses it to calculate and maximize the PFD frequency (frequency of the phasefrequency detector). The PFD frequency is further used to calculate thetimeouts: synthesizer lock, VCO band selection, automatic levelcalibration (ALC) and PLL settling time.This initial driver exposes the attributes for setting the frequency andenabling/disabling the different adf4371 channels.Datasheet:Link: https://www.analog.com/media/en/technical-documentation/data-sheets/adf4371.pdfSigned-off-by: Stefan Popa Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/iio/frequency/Makefile

3edc84e6 - iio: Add a comment to about alphabetical order to Kconfigs and Makefiles

Mon, 15 Jul 2013 07:45:00 +0000

iio: Add a comment to about alphabetical order to Kconfigs and MakefilesKeeping Makefile and Kconfig entries in alphabetical order usually works betterthan just appending new entries at the end, since it reduces the amount ofconflicts. This patch adds a comment to the IIO Kconfig and Makefile files todocument that the entries should be kept in alphabetical order.Also reorder those entries which weren't in alphabetical order yet.Signed-off-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron List of files: /linux-6.15/drivers/iio/frequency/Makefile

e31166f0 - iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband Synthesizers

Tue, 29 May 2012 10:41:20 +0000

iio: frequency: New driver for Analog Devices ADF4350/ADF4351 Wideband SynthesizersChanges since V1:Apply Jonathan's review feedback: Introduce and use IIO_ALTVOLTAGE. Fix up comments and documentation. Remove dead code. Reorder some code fragments. Add missing iio_device_free.Convert to new API.Fix-up out of staging includes.Removed pll_locked attribute.Changes since V2:Use module_spi_driver.adf4350_remove: move gpio_free after regulator.target patch to drivers/iioSigned-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/iio/frequency/Makefile

cd1678f9 - iio: frequency: New driver for AD9523 SPI Low Jitter Clock Generator

Tue, 29 May 2012 10:41:19 +0000

iio: frequency: New driver for AD9523 SPI Low Jitter Clock GeneratorChanges since V1:Apply Jonathan's review feedback:Revise device status attribute names, and split documentation into two sections.Add additional comments, and fix indention issues.Remove pointless zero initializations.Revise return value handling.Simplify some code sections.Split store_eeprom and sync handling into separate functions.Use strtobool where applicable.Document platform data structures using kernel-doc style.Use dev_to_iio_devwrite_raw IIO_CHAN_INFO_FREQUENCY: Reject values <= 0Make patch target drivers/iioChanges since V2:Use for_each_clear_bit() and __set_bit() where applicable.Add descriptive comment.Avoid temporary for struct regulator.spi_device_id name use ad9523-1, ad9523 will be added later.Signed-off-by: Michael Hennerich Acked-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/iio/frequency/Makefile