Changes in Kconfig

db2c190a - drm/tidss: Run DRM default client setup

Tue, 24 Sep 2024 07:12:39 +0000

drm/tidss: Run DRM default client setupCall drm_client_setup() to run the kernel's default client setupfor DRM. Set fbdev_probe in struct drm_driver, so that the clientsetup can start the common fbdev client.The tidss driver specifies a preferred color mode of 32. As thisis the default if no format has been given, leave it out entirely.v5:- select DRM_CLIENT_SELECTIONSigned-off-by: Thomas Zimmermann Cc: Jyri Sarha Cc: Tomi Valkeinen Acked-by: Javier Martinez Canillas Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-42-tzimmermann@suse.de List of files: /linux-6.15/drivers/gpu/drm/tidss/Kconfig

9da7ec9b - drm/bridge-connector: move to DRM_DISPLAY_HELPER module

Tue, 03 Sep 2024 02:01:57 +0000

drm/bridge-connector: move to DRM_DISPLAY_HELPER moduledrm_bridge_connector is a "leaf" driver, belonging to the displayhelper, rather than the "CRTC" drm_kms_helper module. Move the driverto the drm/display and add necessary Kconfig selection clauses.Suggested-by: Maxime Ripard Acked-by: Maxime Ripard Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240903-drm-bridge-connector-fix-hdmi-reset-v5-2-daebde6d9857@linaro.orgSigned-off-by: Maxime Ripard List of files: /linux-6.15/drivers/gpu/drm/tidss/Kconfig

4a83c26a - drm/gem: rename GEM CMA helpers to GEM DMA helpers

Tue, 02 Aug 2022 00:04:03 +0000

drm/gem: rename GEM CMA helpers to GEM DMA helpersRename "GEM CMA" helpers to "GEM DMA" helpers - considering thehierarchy of APIs (mm/cma -> dma -> gem dma) calling them "GEMDMA" seems to be more applicable.Besides that, commit e57924d4ae80 ("drm/doc: Task to rename CMA helpers")requests to rename the CMA helpers and implies that people seem to beconfused about the naming.In order to do this renaming the following script was used:``` #!/bin/bash DIRS="drivers/gpu include/drm Documentation/gpu" REGEX_SYM_UPPER="[0-9A-Z_\-]" REGEX_SYM_LOWER="[0-9a-z_\-]" REGEX_GREP_UPPER="(${REGEX_SYM_UPPER}*)(GEM)_CMA_(${REGEX_SYM_UPPER}*)" REGEX_GREP_LOWER="(${REGEX_SYM_LOWER}*)(gem)_cma_(${REGEX_SYM_LOWER}*)" REGEX_SED_UPPER="s/${REGEX_GREP_UPPER}/\1\2_DMA_\3/g" REGEX_SED_LOWER="s/${REGEX_GREP_LOWER}/\1\2_dma_\3/g" # Find all upper case 'CMA' symbols and replace them with 'DMA'. for ff in $(grep -REHl "${REGEX_GREP_UPPER}" $DIRS) do sed -i -E "$REGEX_SED_UPPER" $ff done # Find all lower case 'cma' symbols and replace them with 'dma'. for ff in $(grep -REHl "${REGEX_GREP_LOWER}" $DIRS) do sed -i -E "$REGEX_SED_LOWER" $ff done # Replace all occurrences of 'CMA' / 'cma' in comments and # documentation files with 'DMA' / 'dma'. for ff in $(grep -RiHl " cma " $DIRS) do sed -i -E "s/ cma / dma /g" $ff sed -i -E "s/ CMA / DMA /g" $ff done # Rename all 'cma_obj's to 'dma_obj'. for ff in $(grep -RiHl "cma_obj" $DIRS) do sed -i -E "s/cma_obj/dma_obj/g" $ff done```Only a few more manual modifications were needed, e.g. reverting thefollowing modifications in some DRM Kconfig files - select CMA if HAVE_DMA_CONTIGUOUS + select DMA if HAVE_DMA_CONTIGUOUSas well as manually picking the occurrences of 'CMA'/'cma' in comments anddocumentation which relate to "GEM CMA", but not "FB CMA".Also drivers/gpu/drm/Makefile was fixed up manually after renamingdrm_gem_cma_helper.c to drm_gem_dma_helper.c.This patch is compile-time tested building a x86_64 kernel with`make allyesconfig && make drivers/gpu/drm`.Acked-by: Sam Ravnborg Acked-by: Thomas Zimmermann Reviewed-by: Laurent Pinchart Signed-off-by: Danilo Krummrich Reviewed-by: Liviu Dudau #drivers/gpu/drm/armSigned-off-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20220802000405.949236-4-dakr@redhat.com List of files: /linux-6.15/drivers/gpu/drm/tidss/Kconfig

09717af7 - drm: Remove CONFIG_DRM_KMS_CMA_HELPER option

Sat, 06 Nov 2021 19:35:09 +0000

drm: Remove CONFIG_DRM_KMS_CMA_HELPER optionLink drm_fb_cma_helper.o into drm_cma_helper.ko if CONFIG_DRM_KMS_HELPERhas been set. Remove CONFIG_DRM_KMS_CMA_HELPER config option. SelectingKMS helpers and CMA will now automatically enable CMA KMS helpers.Some drivers' Kconfig files did not correctly select KMS or CMA helpers.Fix this as part of the change.Signed-off-by: Thomas Zimmermann Reviewed-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20211106193509.17472-3-tzimmermann@suse.de List of files: /linux-6.15/drivers/gpu/drm/tidss/Kconfig

32a1795f - drm/tidss: New driver for TI Keystone platform Display SubSystem

Fri, 08 Nov 2019 07:45:28 +0000

drm/tidss: New driver for TI Keystone platform Display SubSystemThis patch adds a new DRM driver for Texas Instruments DSS IPs used onTexas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP isa major change to the older DSS IP versions, which are supported bythe omapdrm driver. While on higher level the Keystone DSS resemblesthe older DSS versions, the registers are completely different and theinternal pipelines differ a lot.DSS IP found on K2G is an "ultra-light" version, and has only a singleplane and a single output. The K3 DSS IPs are found on AM65x and J721ESoCs. AM65x DSS has two video ports, one full video plane, and another"lite" plane without scaling support. J721E has 4 video ports, 2 videoplanes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)output.Version history:v2: - rebased on top of drm-next-2019-11-27 - sort all include lines in all files - remove all include - remove select "select VIDEOMODE_HELPERS" - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no to call it in new modeset case as it is also called in vp_enable()) - change probe sequence and drm_device allocation (follow example in drm_drv.c) - use __maybe_unused instead of #ifdef for pm functions - remove "struct drm_fbdev_cma *fbdev;" from driver data - check panel connector type before connecting itv3: no changev4: no changev5: - remove fifo underflow irq handling, it is not an error and it should be used for debug purposes only - memory tuning, prefetch plane fifo up to high-threshold value to minimize possibility of underflows.v6: - Check CTM and gamma support from dispc_features when creating crtc - Implement CTM support for k2g and fix k3 CTM implementation - Remove gamma property persistence and always write color properties in a new modesetv7: - Fix checkpatch.pl --strict issues - Rebase on top of drm-misc-next-2020-01-10v8: - Remove idle debug prints from dispc_init() - Add Reviewed-by: Benoit Parrot v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid conflict exported omapfb function with same name - Add Signed-off-by: Tomi Valkeinen Co-developed-by: Tomi Valkeinen Signed-off-by: Jyri Sarha Acked-by: Sam Ravnborg Reviewed-by: Benoit Parrot Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com List of files: /linux-6.15/drivers/gpu/drm/tidss/Kconfig