Changes in Makefile

052e1f01 - net: atm: remove support for ZeitNet ZN122x ATM devices

Tue, 26 Apr 2022 17:54:33 +0000

net: atm: remove support for ZeitNet ZN122x ATM devicesThis driver received nothing but automated fixes in the last 15 years.Since it's using virt_to_bus it's unlikely to be used on any modernplatform.Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

5b74a20d - net: atm: remove support for Madge Horizon ATM devices

Tue, 26 Apr 2022 17:54:32 +0000

net: atm: remove support for Madge Horizon ATM devicesThis driver received nothing but automated fixes since git era begun.Since it's using virt_to_bus it's unlikely to be used on any modernplatform.Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

41c335c8 - net: atm: remove support for Fujitsu FireStream ATM devices

Tue, 26 Apr 2022 17:54:31 +0000

net: atm: remove support for Fujitsu FireStream ATM devicesThis driver received nothing but automated fixes (mostly spellingand compiler warnings) since git era begun. Since it's usingvirt_to_bus it's unlikely to be used on any modern platform.Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

e05afd08 - net: atm: remove the ambassador driver

Wed, 06 Apr 2022 04:16:27 +0000

net: atm: remove the ambassador driverThe driver for ATM Ambassador devices spews build warnings onmicroblaze. The virt_to_bus() calls discard the volatile keyword.The right thing to do would be to migrate this driver to a modernDMA API but it seems unlikely anyone is actually using it.There had been no fixes or functional changes here sincethe git era begun.In fact it sounds like the FW loading was broken from 2008'til 2012 - see commit fcdc90b025e6 ("atm: forever loop loadingambassador firmware").Let's remove this driver, there isn't much changing in the APIs,if users come forward we can apologize and revert.Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/atm/Makefile

7453da82 - Drivers: atm: Makefile: replace the use of -objs with -y

Fri, 15 Oct 2010 17:53:29 +0000

Drivers: atm: Makefile: replace the use of -objs with -yChanged -objs to -y in Makefile.Signed-off-by: Tracey Dent Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

9c54004e - atm: Driver for Solos PCI ADSL2+ card.

Tue, 23 Dec 2008 04:09:02 +0000

atm: Driver for Solos PCI ADSL2+ card.This adds basic support for the 'Solos' PCI ADSL2+ cards being developedby Traverse Technologies and Xrio Ltd:http://www.traverse.com.au/productview.php?product_id=116Signed-off-by: Nathan Williams Signed-off-by: David Woodhouse Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

27d202ff - firmware: convert Ambassador ATM driver to request_firmware()

Thu, 05 Jun 2008 11:59:51 +0000

firmware: convert Ambassador ATM driver to request_firmware()Since it had various regions to be loaded to separate addresses, and itwanted to do them in fairly small chunks anyway, switch it to use thenew ihex code. Encode the start address in the first record.Signed-off-by: David Woodhouse Acked-by: Chas Williams List of files: /linux-6.15/drivers/atm/Makefile

e92481f9 - atm: [fore200e] convert to use request_firmware()

Tue, 17 Jun 2008 23:23:11 +0000

atm: [fore200e] convert to use request_firmware()Signed-off-by: Chas Williams Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

06c5040c - kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP

Mon, 15 Oct 2007 20:17:25 +0000

kbuild: enable 'make CPPFLAGS=...' to add additional options to CPPThe variable CPPFLAGS is a wellknown variable and the usage bykbuild may result in unexpected behaviour.This patch replace use of CPPFLAGS with KBUILD_CPPFLAGS all over thetree and enabling one to use:make CPPFLAGS=...to specify additional CPP commandline options.Patch was tested on following architectures:alpha, arm, i386, x86_64, mips, sparc, sparc64, ia64, m68k, s390Signed-off-by: Sam Ravnborg List of files: /linux-6.15/drivers/atm/Makefile

170b828a - [ATM]: Add CPPFLAGS to byteorder.h check

Tue, 05 Dec 2006 03:33:47 +0000

[ATM]: Add CPPFLAGS to byteorder.h checkO= builds produced errors in the shell command because of unfound headers.Signed-off-by: Ben Collins Signed-off-by: Andrew Morton Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

fb296449 - [ATM]: [adummy] dummy ATM driver (similar to net/dummy)

Wed, 30 Nov 2005 00:17:11 +0000

[ATM]: [adummy] dummy ATM driver (similar to net/dummy)Signed-off-by: Chas Williams Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

3087e1ff - [ATM]: fix ATM makefile for out-of-source-tree builds

Thu, 02 Jun 2005 20:03:15 +0000

[ATM]: fix ATM makefile for out-of-source-tree buildsSigned-off-by: Jan Beulich Signed-off-by: Chas Williams Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Makefile

1da177e4 - Linux-2.6.12-rc2

Sat, 16 Apr 2005 22:20:36 +0000

Linux-2.6.12-rc2Initial git repository build. I'm not bothering with the full history,even though we have it. We can create a separate "historical" gitarchive of that later if we want to, and in the meantime it's about3.2GB when imported into git - space that would just make the earlygit days unnecessarily complicated, when we don't have a lot of goodinfrastructure for it.Let it rip! List of files: /linux-6.15/drivers/atm/Makefile