Changes in Kconfig

052e1f01 - net: atm: remove support for ZeitNet ZN122x ATM devices

Tue, 26 Apr 2022 17:54:33 +0000

net: atm: remove support for ZeitNet ZN122x ATM devicesThis driver received nothing but automated fixes in the last 15 years.Since it's using virt_to_bus it's unlikely to be used on any modernplatform.Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

5b74a20d - net: atm: remove support for Madge Horizon ATM devices

Tue, 26 Apr 2022 17:54:32 +0000

net: atm: remove support for Madge Horizon ATM devicesThis driver received nothing but automated fixes since git era begun.Since it's using virt_to_bus it's unlikely to be used on any modernplatform.Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

41c335c8 - net: atm: remove support for Fujitsu FireStream ATM devices

Tue, 26 Apr 2022 17:54:31 +0000

net: atm: remove support for Fujitsu FireStream ATM devicesThis driver received nothing but automated fixes (mostly spellingand compiler warnings) since git era begun. Since it's usingvirt_to_bus it's unlikely to be used on any modern platform.Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

e05afd08 - net: atm: remove the ambassador driver

Wed, 06 Apr 2022 04:16:27 +0000

net: atm: remove the ambassador driverThe driver for ATM Ambassador devices spews build warnings onmicroblaze. The virt_to_bus() calls discard the volatile keyword.The right thing to do would be to migrate this driver to a modernDMA API but it seems unlikely anyone is actually using it.There had been no fixes or functional changes here sincethe git era begun.In fact it sounds like the FW loading was broken from 2008'til 2012 - see commit fcdc90b025e6 ("atm: forever loop loadingambassador firmware").Let's remove this driver, there isn't much changing in the APIs,if users come forward we can apologize and revert.Link: https://lore.kernel.org/all/20220321144013.440d7fc0@kicinski-fedora-pc1c0hjn.dhcp.thefacebook.com/Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

9633a0e9 - docs: networking: move ATM drivers to the hw driver section

Fri, 26 Jun 2020 17:27:30 +0000

docs: networking: move ATM drivers to the hw driver sectionMove docs for cxacru, fore200e and iphase under device_drivers/atm.Signed-off-by: Jakub Kicinski Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

a7f7f624 - treewide: replace '---help---' in Kconfig files with 'help'

Sat, 13 Jun 2020 16:50:22 +0000

treewide: replace '---help---' in Kconfig files with 'help'Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over'---help---'"), the number of '---help---' has been graduallydecreasing, but there are still more than 2400 instances.This commit finishes the conversion. While I touched the lines,I also fixed the indentation.There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---'In order to convert all of them to 1 tab + 'help', I ran thefollowing commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'Signed-off-by: Masahiro Yamada List of files: /linux-6.15/drivers/atm/Kconfig

aac86c88 - docs: networking: convert iphase.txt to ReST

Mon, 27 Apr 2020 22:01:47 +0000

docs: networking: convert iphase.txt to ReST- add SPDX header;- adjust title using the proper markup;- mark code blocks and literals as such;- mark tables as such;- mark lists as such;- adjust identation, whitespaces and blank lines;- add to networking/index.rst.Signed-off-by: Mauro Carvalho Chehab Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

62502dff - docs: networking: convert fore200e.txt to ReST

Mon, 27 Apr 2020 22:01:37 +0000

docs: networking: convert fore200e.txt to ReST- add SPDX header;- adjust title markup;- mark code blocks and literals as such;- adjust identation, whitespaces and blank lines;- add to networking/index.rst.Signed-off-by: Mauro Carvalho Chehab Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

cd9d4ff9 - Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105

Mon, 19 Aug 2019 05:04:25 +0000

Kconfig: Fix the reference to the IDT77105 Phy driver in the description of ATM_NICSTAR_USE_IDT77105This should be IDT77105, not IDT77015.Signed-off-by: Christophe JAILLET Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/drivers/atm/Kconfig

631dd1a8 - Update broken web addresses in the kernel.

Mon, 18 Oct 2010 09:03:14 +0000

Update broken web addresses in the kernel.The patch below updates broken web addresses in the kernelSigned-off-by: Justin P. Mattock Cc: Maciej W. Rozycki Cc: Geert Uytterhoeven Cc: Finn Thain Cc: Randy Dunlap Cc: Matt Turner Cc: Dimitry Torokhov Cc: Mike Frysinger Acked-by: Ben Pfaff Acked-by: Hans J. Koch Reviewed-by: Finn Thain Signed-off-by: Jiri Kosina List of files: /linux-6.15/drivers/atm/Kconfig

864a3ff6 - atm: [nicstar] remove virt_to_bus() and support 64-bit platforms

Sat, 29 May 2010 09:04:25 +0000

atm: [nicstar] remove virt_to_bus() and support 64-bit platformsSigned-off-by: Chas Williams - CONTRACTOR Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

e1bc7eed - atm: select FW_LOADER in Kconfig for solos-pci

Sun, 16 May 2010 03:12:36 +0000

atm: select FW_LOADER in Kconfig for solos-pcisolos-pci uses request_firmware() for firmware upgradesSigned-off-by: Nathan Williams Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

9c54004e - atm: Driver for Solos PCI ADSL2+ card.

Tue, 23 Dec 2008 04:09:02 +0000

atm: Driver for Solos PCI ADSL2+ card.This adds basic support for the 'Solos' PCI ADSL2+ cards being developedby Traverse Technologies and Xrio Ltd:http://www.traverse.com.au/productview.php?product_id=116Signed-off-by: Nathan Williams Signed-off-by: David Woodhouse Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

e92481f9 - atm: [fore200e] convert to use request_firmware()

Tue, 17 Jun 2008 23:23:11 +0000

atm: [fore200e] convert to use request_firmware()Signed-off-by: Chas Williams Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

97928f70 - atm: [iphase] 64-bit cleanup

Tue, 17 Jun 2008 23:21:18 +0000

atm: [iphase] 64-bit cleanupThis fixes the most obvious 64-bit problems, but it is still very verybroken in other aspects.Signed-off-by: Alan Cox Signed-off-by: Chas Williams Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

06bfb7eb - Add some help texts to recently-introduced kconfig items

Sat, 18 Aug 2007 10:56:21 +0000

Add some help texts to recently-introduced kconfig itemsSigned-off-by: Jan Engelhardt Signed-off-by: Stefan Richter (edited MACINTOSH_DRIVERS per Geert Uytterhoeven's remark)Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/atm/Kconfig

83ca46e7 - [ATM]: nicstar needs virt_to_bus

Wed, 18 Jul 2007 09:13:42 +0000

[ATM]: nicstar needs virt_to_busSigned-off-by: Stephen Rothwell Signed-off-by: David S. Miller List of files: /linux-6.15/drivers/atm/Kconfig

f057eac0 - Introduce CONFIG_VIRT_TO_BUS

Mon, 16 Jul 2007 06:40:05 +0000

Introduce CONFIG_VIRT_TO_BUSMake some offending drivers depend on it and set CONFIG_ARCH_NO_VIRT_TO_BUSfor ppc64 so that we don't build those drivers.This gets PowerPC allmodconfig and allyesconfig much closer to building.Signed-off-by: Stephen Rothwell Cc: Al Viro Acked-by: David Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/atm/Kconfig

59faba1b - Fix Kconfig dependency problems wrt boolean menuconfigs

Wed, 27 Jun 2007 21:09:54 +0000

Fix Kconfig dependency problems wrt boolean menuconfigsIf one has a dependency chain (tristate)FOO depends on (bool)BAR depends on(tristate)BAZ, build problems will result. If BAZ=m, then BAR can be sety, which allows FOO=y. It's possible to have FOO=y && BAZ=m, whichwouldn't be allowed if FOO depended directly on BAZ. In effect, the boolpromotes the tristate from m to y.This ends up causing a problem with several menuconfigs that look like:menuconfig BAR bool depends on BAZ [tristate]if BARconfig FOO tristateendifThe solution used here is to add the dependencies of BAR to the ifstatement, so that items in the if block will gain a directnon-bool-promoted dependency on BAZ. This is how it would work if a menuwas used instead of an if block.Signed-off-by: Trent Piepho Acked-by: Mauro Carvalho Chehab Cc: "David S. Miller" Acked-by: Jeff Garzik Cc: Dominik Brodowski Cc: Chas Williams Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/drivers/atm/Kconfig