Changes in Kconfig

7c28a35e - sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQ

Mon, 10 Jul 2023 23:31:32 +0000

sh: hd64461: Handle virq offset for offchip IRQ base and HD64461 IRQA recent change to start counting SuperH IRQ #s from 16 breaks supportfor the Hitachi HD64461 companion chip.Move the offchip IRQ base and HD64461 IRQ # by 16 in order toaccommodate for the new virq numbering rules.Fixes: a8ac2961148e ("sh: Avoid using IRQ0 on SH3 and SH4")Signed-off-by: Artur Rojek Reviewed-by: Geert Uytterhoeven Reviewed-by: John Paul Adrian Glaubitz Link: https://lore.kernel.org/r/20230710233132.69734-1-contact@artur-rojek.euSigned-off-by: John Paul Adrian Glaubitz List of files: /linux-6.15/arch/sh/cchips/Kconfig

a7f7f624 - treewide: replace '---help---' in Kconfig files with 'help'

Sat, 13 Jun 2020 16:50:22 +0000

treewide: replace '---help---' in Kconfig files with 'help'Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over'---help---'"), the number of '---help---' has been graduallydecreasing, but there are still more than 2400 instances.This commit finishes the conversion. While I touched the lines,I also fixed the indentation.There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---'In order to convert all of them to 1 tab + 'help', I ran thefollowing commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'Signed-off-by: Masahiro Yamada List of files: /linux-6.15/arch/sh/cchips/Kconfig

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/arch/sh/cchips/Kconfig

bec36eca - sh: hd64461: Fix up I/O base register offsets.

Fri, 15 May 2009 03:03:04 +0000

sh: hd64461: Fix up I/O base register offsets.hd64461 is mapped in a fixed location, so the I/O base itself is fairlymeaningless as a configuration item. Additionally, this makes itimpossible to share hd64461 code alongside generic drivers (in the caseof sh_dac_audio), so simply make it commonly defined and permit themach_is_foo() logic to work out the proper semantics.Signed-off-by: Paul Mundt List of files: /linux-6.15/arch/sh/cchips/Kconfig

3eeebf17 - sh: Kill off long-dead HD64465 cchip support.

Tue, 28 Oct 2008 11:07:44 +0000

sh: Kill off long-dead HD64465 cchip support.This code has been dead for many years. The last update it receivedwas in 2003 in order to update it for the driver model changes, thoughit had already been in disarray and unused before that point. The onlyboards that ever used this chip have not had users in many years either,so it is finally safe to just kill it off and move on with life.Signed-off-by: Paul Mundt List of files: /linux-6.15/arch/sh/cchips/Kconfig

f8b40d8c - sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501

Sun, 12 Aug 2007 06:30:40 +0000

sh: replace sh specific CONFIG_VOYAGERGX with CONFIG_MFD_SM501This patch replaces all instances of CONFIG_VOYAGERGX withCONFIG_MFD_SM501. While at it we make sure the r2d code compilesboth with and without SM501.Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt List of files: /linux-6.15/arch/sh/cchips/Kconfig

357d5946 - sh: Tidy up dependencies for SH-2 build.

Mon, 11 Jun 2007 06:32:07 +0000

sh: Tidy up dependencies for SH-2 build.SH-2 can presently get in to some pretty bogus states, sowe tidy up the dependencies a bit and get it all buildingagain.This gets us a bit closer to a functional allyesconfigand allmodconfig, though there are still a few things tofix up.Signed-off-by: Paul Mundt List of files: /linux-6.15/arch/sh/cchips/Kconfig

373e68b5 - sh: Board updates for I/O routine rework.

Wed, 27 Sep 2006 06:41:24 +0000

sh: Board updates for I/O routine rework.This updates the various boards for some of the recent I/O routineupdates.Signed-off-by: Paul Mundt List of files: /linux-6.15/arch/sh/cchips/Kconfig

1da177e4 - Linux-2.6.12-rc2

Sat, 16 Apr 2005 22:20:36 +0000

Linux-2.6.12-rc2Initial git repository build. I'm not bothering with the full history,even though we have it. We can create a separate "historical" gitarchive of that later if we want to, and in the meantime it's about3.2GB when imported into git - space that would just make the earlygit days unnecessarily complicated, when we don't have a lot of goodinfrastructure for it.Let it rip! List of files: /linux-6.15/arch/sh/cchips/Kconfig