Changes in setup.c

b95b30e5 - mips: bmips: setup: make CBR address configurable

Thu, 20 Jun 2024 15:26:44 +0000

mips: bmips: setup: make CBR address configurableAdd support to provide CBR address from DT to handle brokenSoC/Bootloader that doesn't correctly init it. This permits to use theRAC flush even in these condition.To provide a CBR address from DT, the property "brcm,bmips-cbr-reg"needs to be set in the "cpus" node. On DT init, this property presencewill be checked and will set the bmips_cbr_addr value accordingly. Alsobmips_rac_flush_disable will be set to false as RAC flush can becorrectly supported.The CBR address from DT will overwrite the cached one and theone set in the CBR register will be ignored.Also the DT CBR address is validated on being outside DRAM window.Signed-off-by: Christian Marangi Acked-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

a5c05453 - mips: bmips: rework and cache CBR addr handling

Thu, 20 Jun 2024 15:26:42 +0000

mips: bmips: rework and cache CBR addr handlingRework the handling of the CBR address and cache it. This addressdoesn't change and can be cached instead of reading the register everytime.This is in preparation of permitting to tweak the CBR address in DT withbroken SoC or bootloader.bmips_cbr_addr is defined in setup.c for each arch to keep compatibilitywith legacy brcm47xx/brcm63xx and generic BMIPS target.Acked-by: Florian Fainelli Signed-off-by: Christian Marangi Signed-off-by: Thomas Bogendoerfer List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

dd3c33cc - MIPS: BCM63XX: Fix missing prototypes

Tue, 23 Jan 2024 17:46:54 +0000

MIPS: BCM63XX: Fix missing prototypesMost of the symbols for which we do not have a prototype can actually bemade static and for the few that cannot, there is already a declarationin a header for it.Signed-off-by: Florian Fainelli Signed-off-by: Thomas Bogendoerfer List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

e7ae8d17 - MIPS: replace add_memory_region with memblock

Fri, 09 Oct 2020 12:14:46 +0000

MIPS: replace add_memory_region with memblockadd_memory_region was the old interface for registering memory andwas already changed to used memblock internaly. Replace it bydirectly calling memblock functions.Signed-off-by: Thomas Bogendoerfer List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

57c8a661 - mm: remove include/linux/bootmem.h

Tue, 30 Oct 2018 22:09:49 +0000

mm: remove include/linux/bootmem.hMove remaining definitions and declarations from include/linux/bootmem.hinto include/linux/memblock.h and remove the redundant header.The includes were replaced with the semantic patch below and thensemi-automated removal of duplicated '#include @@@@- #include + #include [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au[sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au[sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.auLink: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: Mike Rapoport Signed-off-by: Stephen Rothwell Acked-by: Michal Hocko Cc: Catalin Marinas Cc: Chris Zankel Cc: "David S. Miller" Cc: Geert Uytterhoeven Cc: Greentime Hu Cc: Greg Kroah-Hartman Cc: Guan Xuetao Cc: Ingo Molnar Cc: "James E.J. Bottomley" Cc: Jonas Bonn Cc: Jonathan Corbet Cc: Ley Foon Tan Cc: Mark Salter Cc: Martin Schwidefsky Cc: Matt Turner Cc: Michael Ellerman Cc: Michal Simek Cc: Palmer Dabbelt Cc: Paul Burton Cc: Richard Kuo Cc: Richard Weinberger Cc: Rich Felker Cc: Russell King Cc: Serge Semin Cc: Thomas Gleixner Cc: Tony Luck Cc: Vineet Gupta Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

63893ea5 - MIPS: BCM63XX: Use pr_* instead of printk

Wed, 14 Oct 2015 11:27:38 +0000

MIPS: BCM63XX: Use pr_* instead of printkSigned-off-by: Gregory Fong Cc: Florian Fainelli Cc: Jonas Gorski Cc: Joe Perches Cc: Rusty Russell Cc: Nicolas Schichan Cc: linux-mips@linux-mips.orgCc: linux-kernel@vger.kernel.orgPatchwork: https://patchwork.linux-mips.org/patch/11300/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

2ec459f2 - MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices().

Thu, 12 Mar 2015 16:00:58 +0000

MIPS: BCM63xx: Move bcm63xx_gpio_init() to bcm63xx_register_devices().When called from prom init code, bcm63xx_gpio_init() will fail as itwill call gpiochip_add() which relies on a working kmalloc() to allocthe gpio_desc array and kmalloc is not useable yet at prom init time.Move bcm63xx_gpio_init() to bcm63xx_register_devices() (anarch_initcall) where kmalloc works.Fixes: 14e85c0e69d5 ("gpio: remove gpio_descs global array")Signed-off-by: Nicolas Schichan Cc: linux-mips@linux-mips.orgCc: linux-kernel@vger.kernel.orgCc: Alexandre Courbot Patchwork: https://patchwork.linux-mips.org/patch/9530/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

7b933421 - MIPS: BCM63XX: add support for BCM3368 Cable Modem

Tue, 18 Jun 2013 16:55:40 +0000

MIPS: BCM63XX: add support for BCM3368 Cable ModemThe Broadcom BCM3368 Cable Modem SoC is extremely similar to theexisting BCM63xx DSL SoCs, in particular BCM6358, therefore little effortin the existing code base is required to get it supported. This patch addssupport for the following on-chip peripherals:- two UARTS- GPIO- Ethernet- SPI- PCI- NOR FlashThe most noticeable difference with 3368 is that it has its peripheralregister at 0xfff8_0000 we check that separately in ioremap.h. Since3368 is identical to 6358 for its clock and reset bits, we use themverbatim.Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.orgCc: cernekee@gmail.comCc: jogo@openwrt.orgPatchwork: https://patchwork.linux-mips.org/patch/5499/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

2c8aaf71 - MIPS: BCM63XX: add basic BCM6362 support

Thu, 21 Mar 2013 14:03:17 +0000

MIPS: BCM63XX: add basic BCM6362 supportAdd basic support for detecting and booting the BCM6362.Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/5009/Acked-by: John Crispin List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

6605428c - MIPS: BCM63XX: fix revision ID width

Thu, 21 Mar 2013 14:03:15 +0000

MIPS: BCM63XX: fix revision ID widthThe REVID is only 8 bit wide.Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/5007/Acked-by: John Crispin List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

1762c5ab - Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()"

Tue, 19 Mar 2013 13:20:19 +0000

Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()"This commit causes a race between PCI scan and SSB fallback SPROM handlerregistration, causing the wifi to not work on slower systems. The onlysubsystem touched from board_register_devices is platform deviceregistration, which is safe as an arch init call.This reverts commit d64ed7ada2f689d2c62af1892ca55e47d3653e36 [MIPS:BCM63XX: Call board_register_device from device_initcall()].Signed-off-by: Jonas Gorski To: linux-mips@linux-mips.orgCc: John Crispin Cc: Maxime Bizon Cc: Florian Fainelli Cc: Kevin Cernekee Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

6d591805 - MIPS: BCM63XX: don't write to the chipid register on reboot

Fri, 13 Jul 2012 07:46:04 +0000

MIPS: BCM63XX: don't write to the chipid register on rebootWhile harmless, it is bad style to do so.Signed-off-by: Maxime Bizon Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/4092/Signed-off-by: John Crispin List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

64eaea4a - MIPS: BCM63XX: add external irq support for BCM6345

Fri, 13 Jul 2012 07:46:03 +0000

MIPS: BCM63XX: add external irq support for BCM6345Add the missing definitions for BCM6345.Signed-off-by: Maxime Bizon Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/4091/Signed-off-by: John Crispin List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

e5766aea - MIPS: BCM63XX: Add basic BCM6328 support

Tue, 24 Jul 2012 14:33:12 +0000

MIPS: BCM63XX: Add basic BCM6328 supportThis includes CPU speed, memory size detection and working UART, butlacking the appropriate drivers, no support for attached flash.Signed-off-by: Jonas Gorski Cc: linux-mips@linux-mips.orgCc: Maxime Bizon Cc: Florian Fainelli Cc: Kevin Cernekee Patchwork: https://patchwork.linux-mips.org/patch/3951/Reviewed-by: Florian Fainelli Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

881b999e - mips: Fix typo in bcm63xx/setup.c

Sat, 28 Jan 2012 13:36:56 +0000

mips: Fix typo in bcm63xx/setup.cCorrect spelling "reseting" to "resetting" inarch/mips/bcm63xx/setup.cSigned-off-by: Masanari Iida Signed-off-by: Jiri Kosina List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

6224892c - MIPS: BCM63XX: Add external irq support for non 6348 CPUs.

Fri, 04 Nov 2011 18:09:34 +0000

MIPS: BCM63XX: Add external irq support for non 6348 CPUs.Signed-off-by: Maxime Bizon Cc: linux-mips@linux-mips.orgPatchwork: https://patchwork.linux-mips.org/patch/2899/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

d64ed7ad - MIPS: BCM63XX: Call board_register_device from device_initcall()

Fri, 04 Nov 2011 18:09:27 +0000

MIPS: BCM63XX: Call board_register_device from device_initcall()Some device registration (eg leds), expect subsystem initcall to berun first, so move board device registration to device_initcall().Signed-off-by: Maxime Bizon Cc: linux-mips@linux-mips.orgPatchwork: https://patchwork.linux-mips.org/patch/2891/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

e85d59df - MIPS: BCM63xx: Fix soft-reset lockup on BCM6345

Mon, 31 Aug 2009 18:27:39 +0000

MIPS: BCM63xx: Fix soft-reset lockup on BCM6345This patch fixes a lockup on BCM6345 where setting the PLL soft reset bitwill also lock the other blocks including UART. Instead of setting onlythe PLL soft reset bit in the software reset register, set this bit but donot touch the others.Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c

e7300d04 - MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.

Tue, 18 Aug 2009 12:23:37 +0000

MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.Signed-off-by: Maxime Bizon Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/setup.c