Changes in Makefile

682fee80 - MIPS: BCM63XX: drop unused and broken DSP platform device

Sun, 30 Dec 2018 11:55:09 +0000

MIPS: BCM63XX: drop unused and broken DSP platform deviceTrying to register the DSP platform device results in a null pointeraccess:[ 0.124184] CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 804e305c, ra == 804e6f20[ 0.135208] Oops[#1]:[ 0.137514] CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.87...[ 0.197117] epc : 804e305c bcm63xx_dsp_register+0x80/0xa4[ 0.202838] ra : 804e6f20 board_register_devices+0x258/0x390...This happens because it tries to copy the passed platform data over theplatform_device's unpopulated platform_data.Since this code has been broken since its submission, no driver was eversubmitted for it, and apparently nobody was using it, just remove itinstead of trying to fix it.Fixes: e7300d04bd08 ("MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.")Signed-off-by: Jonas Gorski Signed-off-by: Paul Burton Acked-by: Florian Fainelli Cc: linux-mips@linux-mips.orgCc: Ralf Baechle Cc: James Hogan List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

83bb90fa - MIPS: BCM63XX: add HSSPI platform device and register it

Sat, 30 Nov 2013 11:42:05 +0000

MIPS: BCM63XX: add HSSPI platform device and register itSigned-off-by: Jonas Gorski Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6180/ List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

e7e333cb - MIPS: BCM63XX: move nvram functions into their own file

Wed, 07 Nov 2012 08:25:28 +0000

MIPS: BCM63XX: move nvram functions into their own fileRefactor nvram related functions into its own unit for easier expansionand exposure of the values to other drivers.Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/4516Signed-off-by: John Crispin List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

799faa62 - MIPS: BCM63XX: add core reset helper

Sun, 28 Oct 2012 12:17:54 +0000

MIPS: BCM63XX: add core reset helperAdd a reset helper for resetting the different cores.Signed-off-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/4455Signed-off-by: John Crispin List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

22df90f6 - MIPS: BCM63XX: Create platform_device for USBD

Sat, 14 Jul 2012 18:01:09 +0000

MIPS: BCM63XX: Create platform_device for USBDSigned-off-by: Kevin Cernekee Reviewed-by: Jonas Gorski Patchwork: http://patchwork.linux-mips.org/patch/4111/Signed-off-by: John Crispin List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

4b897d54 - MIPS: BCM63XX: Move flash registration out of board_bcm963xx.c

Tue, 24 Jul 2012 14:33:11 +0000

MIPS: BCM63XX: Move flash registration out of board_bcm963xx.cboard_bcm963xx.c is already large enough.Signed-off-by: Jonas Gorski Cc: linux-mips@linux-mips.orgCc: Maxime Bizon Cc: Florian Fainelli Cc: Kevin Cernekee Patchwork: https://patchwork.linux-mips.org/patch/3952/Reviewed-by: Florian Fainelli Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

b73ab841 - MIPS: BCM63XX: add RNG driver platform_device stub

Tue, 24 Jul 2012 14:33:10 +0000

MIPS: BCM63XX: add RNG driver platform_device stubSigned-off-by: Florian Fainelli Cc: linux-mips@linux-mips.orgCc: mpm@selenic.comCc: herbert@gondor.apana.org.auPatchwork: https://patchwork.linux-mips.org/patch/3325/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

39ca476e - MIPS: BCM63xx: Add stub to register the SPI platform driver

Wed, 04 Jul 2012 14:58:36 +0000

MIPS: BCM63xx: Add stub to register the SPI platform driverThis patch adds the necessary stub to register the SPI platform driver.Since the registers are shuffled between the 4 BCM63xx CPUs supported bythis SPI driver we also need to generate the internal register layout andexport this layout for the driver to use it properly.Signed-off-by: Florian Fainelli Cc: linux-mips@linux-mips.orgCc: grant.likely@secretlab.caCc: spi-devel-general@lists.sourceforge.netPatchwork: https://patchwork.linux-mips.org/patch/3321/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

f5e8abd6 - MIPS: BCM63xx: Migrate to new platform makefile style.

Thu, 05 Aug 2010 12:25:54 +0000

MIPS: BCM63xx: Migrate to new platform makefile style.Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

2cfac7f7 - MIPS: BCM63xx: Prepare for watchdog support

Mon, 10 Aug 2009 19:42:59 +0000

MIPS: BCM63xx: Prepare for watchdog supportThis patch prepares the board code to register a bcm63xx_wdtplatform_device that we are going to use in a subsequent patch.Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

553d6d5f - MIPS: BCM63xx: Add PCMCIA & Cardbus support.

Mon, 28 Sep 2009 12:49:43 +0000

MIPS: BCM63xx: Add PCMCIA & Cardbus support.Signed-off-by: Maxime Bizon Reviewed-by: Wolfram Sang Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

9fcd66e5 - MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.

Fri, 18 Sep 2009 11:04:58 +0000

MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.Signed-off-by: Maxime Bizon Acked-by: Greg Kroah-Hartman Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

9b1fc55a - MIPS: BCM63xx: Add integrated ethernet mac support.

Tue, 18 Aug 2009 12:23:40 +0000

MIPS: BCM63xx: Add integrated ethernet mac support.Signed-off-by: Maxime Bizon Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile

e7300d04 - MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.

Tue, 18 Aug 2009 12:23:37 +0000

MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs.Signed-off-by: Maxime Bizon Signed-off-by: Florian Fainelli Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm63xx/Makefile