Changes in Makefile

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

2ab71a02 - MIPS: BCM47xx: Move SPROM driver to drivers/firmware/

Mon, 25 Jan 2016 08:50:29 +0000

MIPS: BCM47xx: Move SPROM driver to drivers/firmware/Broadcom ARM home routers store SPROM content in NVRAM just like MIPSones. To share SPROM code we need to move it out of arch/mips/ to somecommon place. We already have bcm47xx_nvram in firmware path and SPROMshould fit there as well.This driver is responsible for parsing SoC configuration data into astruct shared between ssb and bcma buses.This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0(ARCH_BCM_5301X).Signed-off-by: Rafał Miłecki Cc: Hauke Mehrtens Cc: linux-mips@linux-mips.orgPatchwork: https://patchwork.linux-mips.org/patch/12210/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

f6e734a8 - MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/

Wed, 10 Jun 2015 21:05:08 +0000

MIPS: BCM47xx: Move NVRAM driver to the drivers/firmware/After Broadcom switched from MIPS to ARM for their home routers we needto have NVRAM driver in some common place (not arch/mips/). As explainedin Kconfig, this driver is responsible for parsing SoC configurationdata that is passed to the kernel in flash from the bootloader firmwarecalled "CFE".We were thinking about putting it in bus directory, however there aretwo possible buses for MIPS: drivers/ssb/ and drivers/bcma/. So thiswon't fit there and this is why I would like to move this driver to thedrivers/firmware/.Signed-off-by: Rafał Miłecki Reviewed-by: Paul Walmsley Cc: linux-mips@linux-mips.orgCc: Hauke Mehrtens Cc: Seiji Aguchi Cc: Greg Kroah-Hartman Cc: Ard Biesheuvel Cc: Mike Waychison Cc: Roy Franz Cc: Matt Fleming Cc: Linus Torvalds Patchwork: https://patchwork.linux-mips.org/patch/10544/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

a2bec078 - MIPS: BCM47XX: Add new file for device specific workarounds

Fri, 21 Mar 2014 09:08:08 +0000

MIPS: BCM47XX: Add new file for device specific workaroundsSigned-off-by: Rafał Miłecki Cc: linux-mips@linux-mips.orgCc: Hauke Mehrtens Patchwork: https://patchwork.linux-mips.org/patch/6627/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

68e30f30 - MIPS: BCM47XX: Drop WGT634U hacks

Thu, 02 Jan 2014 12:53:15 +0000

MIPS: BCM47XX: Drop WGT634U hacksThis old wgt634u.c was trying to implement a bit ugly support forNetgear WGT634U. It provided info about LED, flash mapping & layout andwas trying to handle reset button.This is not needed anymore as we have replacement for all this stuff.Signed-off-by: Rafał Miłecki Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6302/ List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

ef1e3e7a - MIPS: BCM47XX: Prepare support for GPIO buttons

Tue, 14 Jan 2014 11:36:29 +0000

MIPS: BCM47XX: Prepare support for GPIO buttonsSo far this adds support for one Netgear model only, but it's designedand ready to add many more device. We could hopefully import databasefrom OpenWrt.Support for SSB is currently disabled, because SSB doesn't implement IRQdomain yet.Signed-off-by: Rafał Miłecki Acked-by: Hauke Mehrtens Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6300/ List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

515fa75d - MIPS: BCM47XX: Prepare support for LEDs

Tue, 14 Jan 2014 11:14:41 +0000

MIPS: BCM47XX: Prepare support for LEDsSo far this is mostly just a proof of concept, database consists of asingle device. Creating a nice iterateable array wasn't an optionbecause devices have different amount of LEDs. And we don't want towaste memory just because of support for a device with dozens on LEDs.Signed-off-by: Rafał Miłecki Acked-by: Hauke Mehrtens Signed-off-by: John Crispin Patchwork: http://patchwork.linux-mips.org/patch/6299/ List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

786c497a - MIPS: BCM47XX: Add board detection

Wed, 18 Sep 2013 11:29:57 +0000

MIPS: BCM47XX: Add board detectionDetect on which board this code is running based on some nvramsettings. This is needed to start board specific workarounds andconfigure the leds and buttons which are on different gpios on every board.This patches add some boards we have seen, but there are many more.Signed-off-by: Hauke Mehrtens Cc: linux-mips@linux-mips.orgPatchwork: https://patchwork.linux-mips.org/patch/5840Patchwork: https://patchwork.linux-mips.org/patch/5855/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

70342287 - MIPS: Whitespace cleanup.

Tue, 22 Jan 2013 11:59:30 +0000

MIPS: Whitespace cleanup.Having received another series of whitespace patches I decided to do thisonce and for all rather than dealing with this kind of patches tricklingin forever.Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

2da4c74d - MIPS: BCM47XX: remove GPIO driver

Tue, 20 Nov 2012 22:24:34 +0000

MIPS: BCM47XX: remove GPIO driverInstated of providing an own GPIO driver use the one provided by ssb andbcma.Signed-off-by: Hauke Mehrtens Patchwork: http://patchwork.linux-mips.org/patch/4592Acked-by: Florian Fainelli List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

019eee2e - MIPS: BCM47XX: move and extend sprom parsing

Mon, 27 Feb 2012 23:56:13 +0000

MIPS: BCM47XX: move and extend sprom parsingMove the sprom parsing from nvram into sprom.c. There are all valuesneeded for sprom version 1 to 9 read from nvram and there are moresanity checks added. This is based on the sprom parsing in the opensource part of the Broadcom SDK.Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

a656ffcb - bcm47xx: make it possible to build bcm47xx without ssb.

Fri, 22 Jul 2011 23:20:13 +0000

bcm47xx: make it possible to build bcm47xx without ssb.Signed-off-by: Hauke Mehrtens Acked-by: Ralf Baechle Signed-off-by: John W. Linville List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

121915c4 - MIPS: BCM47xx: Add NVRAM support devices

Tue, 08 Jun 2010 17:06:01 +0000

MIPS: BCM47xx: Add NVRAM support devicesWhen trying to netboot a Linksys WRT54GS WLAN router, the bootup fails,because of following error message:...[ 0.424000] b44: b44.c:v2.0[ 0.424000] b44: Invalid MAC address found in EEPROM[ 0.432000] b44 ssb0:1: Problem fetching invariants of chip,aborting[ 0.436000] b44: probe of ssb0:1 failed with error -22...The router uses a CFE bootloader, but most of the needed environmentvariables for network card initialization, are not available from CFEvia printenv and even though not via cfe_getenv().The required environment variables are saved in a special partitionin flash memory. The attached patch implement nvram_getenv and enablesbootup via NFS root on my router.Most of the patch is extracted from the OpenWrt subversion repository andstripped down and cleaned up to just fix this issue.[Ralf: sorted out header file inclusions. Lots of unneded headers and suchthat should have been included.]Signed-off-by: Waldemar Brodkorb Reviewed-by: Phil Sutter To: linux-mips@linux-mips.orgCc: Hauke Mehrtens Patchwork: http://patchwork.linux-mips.org/patch/1359/Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

21c854dc - [MIPS] GPIO LED driver for the WGT634U machine

Tue, 25 Sep 2007 13:43:07 +0000

[MIPS] GPIO LED driver for the WGT634U machineAdd LED support to the WGT634U machine. It uses the new gpio-leddriver and a platform driver for the pin definitions. Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

34cc662f - [MIPS] Add gpio support to the BCM47XX platform

Tue, 25 Sep 2007 13:42:09 +0000

[MIPS] Add gpio support to the BCM47XX platformAdd GPIO support to the BCM47XX platform. It will be used by a GPIOLED driver.Signed-off-by: Aurelien Jarno Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile

1c0c13eb - [MIPS] Add support for BCM47XX CPUs.

Tue, 25 Sep 2007 13:40:12 +0000

[MIPS] Add support for BCM47XX CPUs.Note that the BCM4710 does not support the wait instruction, thisis not a mistake in the code. It originally comes from the OpenWrt patches. Cc: Michael Buesch Cc: Felix Fietkau Cc: Florian Schirmer Signed-off-by: Aurelien Jarno Signed-off-by: Andrew Morton Signed-off-by: Ralf Baechle List of files: /linux-6.15/arch/mips/bcm47xx/Makefile