Changes in Makefile

973d248c - ARM: davinci: remove unused cpuidle code

Tue, 13 Aug 2024 08:27:35 +0000

ARM: davinci: remove unused cpuidle codeThe cpuidle driver in mach-davinci is no longer used by anyone.Remove it.Link: https://lore.kernel.org/r/20240813082735.52402-1-brgl@bgdev.plSigned-off-by: Bartosz Golaszewski List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

dec85a95 - ARM: davinci: clean up platform support

Mon, 19 Sep 2022 22:16:17 +0000

ARM: davinci: clean up platform supportWith the board file support gone, and the platform usingDT only, a lot of the remaining code is no longer referencedand can be removed.Technically, the DT file only references DA850, but since thatis very similar to DA830, I'm leaving the latter.Acked-by: Bartosz Golaszewski Signed-off-by: Arnd Bergmann List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

2af4fcc0 - ARM: davinci: remove unused board support

Thu, 29 Sep 2022 13:38:29 +0000

ARM: davinci: remove unused board supportAll Kconfig entries marked as "depends on UNUSED_BOARD_FILES"and their direct dependencies are removed here as planned.Acked-by: Bartosz Golaszewski Signed-off-by: Arnd Bergmann List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

b4aed01d - ARM: davinci: Delete DM646x board files

Fri, 01 Jul 2022 12:05:11 +0000

ARM: davinci: Delete DM646x board filesThe interest of maintaining the DaVinci DM644x board files seemsvery low. Patches to convert the EVM board to use GPIO descriptorshas not been reviewed, tested or merged for several mergewindows in a row, see link below.When I look in the logs for the board files I see nothing butgeneric kernel maintenance and no testing on real hardware foryears.I conclude the DM646x board files are unused and can be deleted.Cc: Kevin Hilman Cc: Arnd Bergmann Cc: Matt Porter Cc: Sekhar Nori Cc: Bartosz Golaszewski Link: https://lore.kernel.org/linux-arm-kernel/20220507124536.171930-2-linus.walleij@linaro.org/Signed-off-by: Linus Walleij List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

7dd33764 - ARM: davinci: Delete DM644x board files

Fri, 01 Jul 2022 11:50:57 +0000

ARM: davinci: Delete DM644x board filesThe interest of maintaining the DaVinci DM644x board files seemsvery low. Patches to convert the EVM board to use GPIO descriptorshas not been reviewed, tested or merged for several mergewindows in a row, see link below.When I look in the logs for the board files I see nothing butgeneric kernel maintenance and no testing on real hardware foryears.I conclude the DM644x board files are unused and can be deleted.Cc: Arnd Bergmann Cc: Matt Porter Cc: Sekhar Nori Cc: Bartosz Golaszewski Link: https://lore.kernel.org/linux-arm-kernel/20220507124536.171930-1-linus.walleij@linaro.org/Signed-off-by: Linus Walleij List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

ca31807b - ARM: davinci: remove include/mach/ subdirectory

Thu, 28 Apr 2022 07:32:09 +0000

ARM: davinci: remove include/mach/ subdirectoryThe files in include/mach are only used from mach/davinci,so they are no longer needed in the traditional location.Move them to arch/arm/mach-davinci/ and drop the logic forthe special include path.The mach/uncompress.h file is not used at all and can justbe removed.Signed-off-by: Arnd Bergmann List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

6b49d4fb - ARM: davinci: remove legacy timer support

Fri, 10 Jan 2020 17:16:43 +0000

ARM: davinci: remove legacy timer supportAll platforms have now been switched to the new clocksource driver.Remove the old code and various no longer needed bits and pieces.Signed-off-by: Bartosz Golaszewski Reviewed-by: David Lechner Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

f962396c - ARM: davinci: support multiplatform build for ARM v5

Thu, 25 Jul 2019 13:12:56 +0000

ARM: davinci: support multiplatform build for ARM v5Add modifications necessary to make davinci part of the ARM v5multiplatform build.Move the arch-specific configuration out of arch/arm/Kconfig andinto mach-davinci/Kconfig. Remove the sub-menu for DaVinciimplementations (they'll be visible directly under the system type.Select all necessary options not already selected by ARCH_MULTI_V5.Update davinci_all_defconfig. Explicitly include the mach-specificheaders in mach-davinci/Makefile.Signed-off-by: Bartosz Golaszewski Acked-by: Sekhar Nori Signed-off-by: Arnd Bergmann List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

0fc3d74c - irqchip: davinci-cp-intc: move the driver to drivers/irqchip

Thu, 14 Feb 2019 14:52:30 +0000

irqchip: davinci-cp-intc: move the driver to drivers/irqchipThe cp-intc driver has now been cleaned up. Move it to drivers/irqchipwhere it belongs.Acked-by: Marc Zyngier Signed-off-by: Bartosz Golaszewski Reviewed-by: David Lechner Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

0145beed - irqchip: davinci-aintc: move the driver to drivers/irqchip

Thu, 14 Feb 2019 14:52:16 +0000

irqchip: davinci-aintc: move the driver to drivers/irqchipThe aintc driver has now been cleaned up. Move it to drivers/irqchipwhere it belongs. There's no device-tree support for any dm* board sothere's no IRQCHIP_OF_DECLARE() - there's only the exported initfunction called from machine code.Acked-by: Marc Zyngier Reviewed-by: David Lechner Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

7f69ae7f - ARM: davinci: unduplicate aemif support

Thu, 28 Jun 2018 09:57:48 +0000

ARM: davinci: unduplicate aemif supportAll users now register platform devices using the ti-aemif driver.Remove the handcrafted aemif API.Signed-off-by: Bartosz Golaszewski Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

27823278 - ARM: davinci: switch to common clock framework

Fri, 18 May 2018 16:48:17 +0000

ARM: davinci: switch to common clock frameworkThis switches ARCH_DAVINCI to use the common clock framework. The legacyclock code in arch/arm/mach-davinci/ is no longer used. New drivers indrivers/clk/davinci/ are used instead.A few macros had to be moved to prevent compilation errors.Signed-off-by: David Lechner Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

9c9b1bc2 - ARM: davinci: add skeleton for pdata-quirks

Mon, 09 Jan 2017 20:55:29 +0000

ARM: davinci: add skeleton for pdata-quirksAdd skeleton pdata-quirks for davinci.Signed-off-by: Kevin Hilman [nsekhar@ti.com: move changes to build pdata-quirks.c and call to pdata_quirks_init() to this patch]Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

f7715b29 - ARM: davinci: PM: fix build when da850 not compiled in

Wed, 16 Nov 2016 16:44:38 +0000

ARM: davinci: PM: fix build when da850 not compiled inCurrently, suspend/resume support is only available on da850 platforms,and the platform PM code has dependencies on da850 functions. However,CONFIG_SUSPEND might be enabled even when da850 support is not, causingbuild failure:arch/arm/mach-davinci/built-in.o: In function `davinci_pm_init':pm_domain.c:(.init.text+0x1fb8): undefined reference to `da8xx_get_mem_ctlr'pm_domain.c:(.init.text+0x20b0): undefined reference to `da8xx_syscfg1_base'Fix this by only building the PM core when da850 is enabled.Reported-by: Sekhar Nori Fixes: aa9aa1ec2df6 ("ARM: davinci: PM: rework init, remove platform device")Signed-off-by: Kevin Hilman Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

86cad160 - ARM: davinci: da8xx: move usb code to new file

Thu, 24 Mar 2016 23:51:28 +0000

ARM: davinci: da8xx: move usb code to new fileWe will be adding more da8xx-specific code for phy and clocks, so it willbe better to have this in a separate file. This way we don't have a bunchof #ifdefs for all of the da8xx stuff.While at it, fix some checkpatch warnings coming from existing code.Signed-off-by: David Lechner [nsekhar@ti.com: typo and checkpatch fixes]Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

65010564 - ARM: davinci: Remove CDCE949 driver

Sun, 18 Jan 2015 23:37:39 +0000

ARM: davinci: Remove CDCE949 driverRemove driver CDCE949 because it is not used anywhere in kernel.It has remained unused for last 5 years.Signed-off-by: Rickard Strandqvist [nsekhar@ti.com: remove additional cdce949 support vestiges and minor updates to commit text]Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

9d6eccb9 - ARM: davinci: remove tnetv107x support

Wed, 12 Feb 2014 21:22:00 +0000

ARM: davinci: remove tnetv107x supportThe tnetv107x support does not compile, and seems to have been brokenfor a while with nobody caring to fix it. So far everyone I askedsaid it's probably dead and completely unused and will never againbe needed in a future kernel release, so let's delete it.If someone finds a use for this code later and is able to get itto work again, we can always revert the removal.Signed-off-by: Arnd Bergmann Acked-by: Sekhar Nori Acked-by: Kevin Hilman List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

3ad7a42d - ARM: davinci: move private EDMA API to arm/common

Wed, 06 Mar 2013 16:15:31 +0000

ARM: davinci: move private EDMA API to arm/commonMove mach-davinci/dma.c to common/edma.c so it can be usedby OMAP (specifically AM33xx) as well.Signed-off-by: Matt Porter Acked-by: Chris Ball # davinci_mmc.cAcked-by: Mark Brown Acked-by: Olof Johansson [nsekhar@ti.com: dropped davinci sffsdr changes]Signed-off-by: Sekhar Nori List of files: /linux-6.15/arch/arm/mach-davinci/Makefile

8a7b1227 - cpufreq: davinci: move cpufreq driver to drivers/cpufreq

Thu, 04 Apr 2013 12:54:11 +0000

cpufreq: davinci: move cpufreq driver to drivers/cpufreqThis patch moves cpufreq driver of ARM based davinci platform todrivers/cpufreq.Signed-off-by: Viresh Kumar Acked-by: Sekhar Nori Acked-by: Arnd Bergmann Signed-off-by: Rafael J. Wysocki List of files: /linux-6.15/arch/arm/mach-davinci/Makefile