Changes in Kconfig

ef2fb84c - ARM: aspeed: Kconfig: Fix indentation

Wed, 28 Sep 2022 02:59:26 +0000

ARM: aspeed: Kconfig: Fix indentationThe convention for indentation seems to be a single tab. Help text isfurther indented by an additional two whitespaces. Fix the lines thatviolate these rules.Signed-off-by: Juerg Haefliger Signed-off-by: Joel Stanley Acked-by: Andrew Jeffery Link: https://lore.kernel.org/r/20220523060532.7864-1-juergh@canonical.comLink: https://lore.kernel.org/r/20220928025926.2592030-1-joel@jms.id.au'Signed-off-by: Arnd Bergmann List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

5d6f5267 - ARM: rework endianess selection

Mon, 04 Apr 2022 09:52:31 +0000

ARM: rework endianess selectionChoosing big-endian vs little-endian kernels in Kconfig has not workedcorrectly since the introduction of CONFIG_ARCH_MULTIPLATFORM a longtime ago.The problems is that CONFIG_BIG_ENDIAN depends onARCH_SUPPORTS_BIG_ENDIAN, which can set by any one platformin the config, but would actually have to be supported by allof them.This was mostly ok for ARMv6/ARMv7 builds, since these are BE8 andtend to just work aside from problems in nonportable device drivers.For ARMv4/v5 machines, CONFIG_BIG_ENDIAN and CONFIG_ARCH_MULTIPLATFORMwere never set together, so this was disabled on all those machinesexcept for IXP4xx.As IXP4xx can now become part of ARCH_MULTIPLATFORM, it seems better toformalize this logic: all ARMv4/v5 platforms get an explicit dependencyon being either big-endian (ixp4xx) or little-endian (the rest). We maywant to fix ixp4xx in the future to support both, but it does not workin LE mode at the moment.For the ARMv6/v7 platforms, there are two ways this could be handled a) allow both modes only for platforms selecting 'ARCH_SUPPORTS_BIG_ENDIAN' today, but only LE mode for the others, given that these were added intentionally at some point. b) allow both modes everwhere, given that it was already possible to build that way by e.g. selecting ARCH_VIRT, and that the list is not an accurate reflection of which platforms may or may not work.Out of these, I picked b) because it seemed slighly more logicalto me.Signed-off-by: Arnd Bergmann List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

9fdba09a - ARM: aspeed: Drop unneeded select of HAVE_SMP

Tue, 05 May 2020 15:07:12 +0000

ARM: aspeed: Drop unneeded select of HAVE_SMPSupport for the 6th generation Aspeed SoCs depends on ARCH_MULTI_V7.As the latter selects HAVE_SMP, there is no need for MACH_ASPEED_G6 toselect HAVE_SMP.Link: https://lore.kernel.org/r/20200505150722.1575-6-geert+renesas@glider.beSigned-off-by: Geert Uytterhoeven Cc: Joel Stanley Cc: Andrew Jeffery Acked-by: Arnd Bergmann Reviewed-by: Andrew Jeffery Signed-off-by: Arnd Bergmann List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

b74d957f - ARM: aspeed: ast2500 is ARMv6K

Thu, 29 Aug 2019 13:43:49 +0000

ARM: aspeed: ast2500 is ARMv6KLinux supports both the original ARMv6 level (early ARM1136) and ARMv6K(later ARM1136, ARM1176 and ARM11mpcore).ast2500 falls into the second categoy, being based on arm1176jzf-s.This is enabled by default when using ARCH_MULTI_V6, so we shouldnot 'select CPU_V6'.Removing this will lead to more efficient use of atomic instructions.Fixes: 8c2ed9bcfbeb ("arm: Add Aspeed machine")Signed-off-by: Arnd Bergmann Reviewed-by: Joel Stanley List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

9afe2c0a - ARM: aspeed: Add ASPEED AST2600 architecture

Wed, 21 Aug 2019 05:55:26 +0000

ARM: aspeed: Add ASPEED AST2600 architectureThe AST2600 is a Cortex A7 dual core CPU that uses the ARM GIC forinterrupts and ARM timer as a clocksource.Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

e35d7db9 - ARM: aspeed: Select timer in each SoC

Wed, 21 Aug 2019 05:55:25 +0000

ARM: aspeed: Select timer in each SoCIn preparation for adding the ast2600 which does not use this timer.Reviewed-by: Andrew Jeffery Signed-off-by: Joel Stanley List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

ec8f24b7 - treewide: Add SPDX license identifier - Makefile/Kconfig

Sun, 19 May 2019 12:07:45 +0000

treewide: Add SPDX license identifier - Makefile/KconfigAdd SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any formThese files fall under the project license, GPL v2 only. The resulting SPDXlicense identifier is: GPL-2.0-onlySigned-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

ec14ba1e - clocksource/drivers/fttmr010: Merge Moxa into FTTMR010

Thu, 18 May 2017 20:17:04 +0000

clocksource/drivers/fttmr010: Merge Moxa into FTTMR010This merges the Moxa Art timer driver into the Faraday FTTMR010driver and replaces all Kconfig symbols to use the Faradaydriver instead. We are now so similar that the drivers canbe merged by just adding a few lines to the Faraday timer.Differences:- The Faraday driver explicitly sets the counter to count upwards for the clocksource, removing the need for the clocksource core to invert the value.- The Faraday driver also handles sched_clock()On the Aspeed, the counter can only count downwards, so supportthe timers in downward-counting mode as well, and flag theAspeed to use this mode. This mode was tested on the Gemini soI have high hopes that it'll work fine on the Aspeed as well.After this we have one driver for all three SoCs and a genericFaraday FTTMR010 timer driver, which is nice.Cc: Joel Stanley Cc: Jonas Jensen Signed-off-by: Linus Walleij Reviewed-by: Joel Stanley Tested-by: Joel Stanley Signed-off-by: Daniel Lezcano List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

43c08c1c - ARM: aspeed: Select pinctrl drivers

Tue, 30 Aug 2016 07:55:54 +0000

ARM: aspeed: Select pinctrl driversSigned-off-by: Andrew Jeffery Signed-off-by: Joel Stanley List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig

8c2ed9bc - arm: Add Aspeed machine

Mon, 21 Mar 2016 06:52:31 +0000

arm: Add Aspeed machineAspeed devices are a common Baseboard Management Controller (BMC)system on chip containing an ARM9 or ARM11 core, off-chip DDR RAM andsupport for a large number of peripherals.This patch adds basic support for the ast2400 and ast2500 machines,capable of booting to a prompt in QEMU (-M palmetto-bmc), on anPalmetto OpenPower development machine, and on the ast2500 EVB.Signed-off-by: Joel Stanley List of files: /linux-6.15/arch/arm/mach-aspeed/Kconfig