Changes in Makefile

ebfc2fd8 - ARC: Fix typos

Fri, 29 Mar 2024 22:14:32 +0000

ARC: Fix typosFix typos, most reported by "codespell arch/arc". Only touches comments,no code changes.Signed-off-by: Bjorn Helgaas Signed-off-by: Vineet Gupta List of files: /linux-6.15/arch/arc/boot/Makefile

3a71e423 - ARC: build: use $(READELF) instead of hard-coded readelf

Sat, 21 Nov 2020 19:36:57 +0000

ARC: build: use $(READELF) instead of hard-coded readelfThe top Makefile defines READELF as the readelf in the cross-toolchains.Use it rather than the host readelf.Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta List of files: /linux-6.15/arch/arc/boot/Makefile

a4e070cf - ARC: build: remove unneeded extra-y

Sat, 21 Nov 2020 19:36:56 +0000

ARC: build: remove unneeded extra-yAdding vmlinux.* to extra-y has no point because we expect they arebuilt on demand while building uImage.*Add them to 'targets' is enough to include the corresponding .cmd file.Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta List of files: /linux-6.15/arch/arc/boot/Makefile

c5e6ae56 - ARC: build: move symlink creation to arch/arc/Makefile to avoid race

Sat, 21 Nov 2020 19:36:55 +0000

ARC: build: move symlink creation to arch/arc/Makefile to avoid raceIf you run 'make uImage uImage.gz' with the parallel option, uImage.gzwill be created by two threads simultaneously.This is because arch/arc/Makefile does not specify the dependencybetween uImage and uImage.gz. Hence, GNU Make assumes they can bebuilt in parallel. One thread descends into arch/arc/boot/ to createuImage, and another to create uImage.gz.Please notice the same log is displayed twice in the following steps: $ export CROSS_COMPILE= $ make -s ARCH=arc defconfig $ make -j$(nproc) ARCH=arc uImage uImage.gz [ snip ] LD vmlinux SORTTAB vmlinux SYSMAP System.map OBJCOPY arch/arc/boot/vmlinux.bin OBJCOPY arch/arc/boot/vmlinux.bin GZIP arch/arc/boot/vmlinux.bin.gz GZIP arch/arc/boot/vmlinux.bin.gz UIMAGE arch/arc/boot/uImage.gz UIMAGE arch/arc/boot/uImage.gz Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2109376 Bytes = 2059.94 KiB = 2.01 MiB Load Address: 80000000 Entry Point: 80004000 Image arch/arc/boot/uImage is ready Image Name: Linux-5.10.0-rc4-00003-g62f23044 Created: Sun Nov 22 02:52:26 2020 Image Type: ARC Linux Kernel Image (gzip compressed) Data Size: 2815455 Bytes = 2749.47 KiB = 2.69 MiB Load Address: 80000000 Entry Point: 80004000This is a race between the two threads trying to write to the same filearch/arc/boot/uImage.gz. This is a potential problem that can generatea broken file.I fixed a similar problem for ARM by commit 3939f3345050 ("ARM: 8418/1:add boot image dependencies to not generate invalid images").I highly recommend to avoid such build rules that cause a race condition.Move the uImage rule to arch/arc/Makefile.Another strangeness is that arch/arc/boot/Makefile compares thetimestamps between $(obj)/uImage and $(obj)/uImage.*: $(obj)/uImage: $(obj)/uImage.$(suffix-y) @ln -sf $(notdir $<) $@ @echo ' Image $@ is ready'This does not work as expected since $(obj)/uImage is a symlink.The symlink should be created in a phony target rule.I used $(kecho) instead of echo to suppress the message'Image arch/arc/boot/uImage is ready' when the -s option is given.Signed-off-by: Masahiro Yamada Signed-off-by: Vineet Gupta List of files: /linux-6.15/arch/arc/boot/Makefile

b2441318 - License cleanup: add SPDX GPL-2.0 license identifier to files with no license

Wed, 01 Nov 2017 14:07:57 +0000

License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseMany source files in the tree are missing licensing information, whichmakes it harder for compliance tools to determine the correct license.By default all files without license information are under the defaultlicense of the kernel, which is GPL version 2.Update the files which contain no license information with the 'GPL-2.0'SPDX license identifier. The SPDX identifier is a legally bindingshorthand, which can be used instead of the full boiler plate text.This patch is based on work done by Thomas Gleixner and Kate Stewart andPhilippe Ombredanne.How this work was done:Patches were generated and checked against linux-4.14-rc6 for a subset ofthe use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information,Further patches will be generated in subsequent months to fix up caseswhere non-standard license headers were used, and references to licensehad to be inferred by heuristics based on keywords.The analysis to determine which SPDX License Identifier to be applied toa file was done in a spreadsheet of side by side results from of theoutput of two independent scanners (ScanCode & Windriver) producing SPDXtag:value files created by Philippe Ombredanne. Philippe prepared thebase worksheet, and did an initial spot review of a few 1000 files.The 4.13 kernel was the starting point of the analysis with 60,537 filesassessed. Kate Stewart did a file by file comparison of the scannerresults in the spreadsheet to determine which SPDX license identifier(s)to be applied to the file. She confirmed any determination that was notimmediately clear with lawyers working with the Linux Foundation.Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines).All documentation files were explicitly excluded.The following heuristics were used to determine which SPDX licenseidentifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time.In total, over 70 hours of logged manual review was done on thespreadsheet to determine the SPDX license identifiers to apply to thesource files by Kate, Philippe, Thomas and, in some cases, confirmationby lawyers working with the Linux Foundation.Kate also obtained a third independent scan of the 4.13 code base fromFOSSology, and compared selected files where the other two scannersdisagreed against that SPDX file, to see if there was new insights. TheWindriver scanner is based on an older version of FOSSology in part, sothey are related.Thomas did random spot checks in about 500 files from the spreadsheetsfor the uapi headers and agreed with SPDX license identifier in thefiles he inspected. For the non-uapi files Thomas did random spot checksin about 15000 files.In initial set of patches against 4.14-rc6, 3 files were found to havecopy/paste license identifier errors, and have been fixed to reflect thecorrect identifier.Additionally Philippe spent 10 hours this week doing a detailed manualinspection and review of the 12,461 patched files from the initial patchversion early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correctThis produced a worksheet with 20 files needing minor correction. Thisworksheet was then exported into 3 different .csv files for thedifferent types of files to be modified.These .csv files were then reviewed by Greg. Thomas wrote a script toparse the csv files and add the proper SPDX tag to the file, in theformat that the file expected. This script was further refined by Gregbased on the output to detect more types of files automatically and todistinguish between header and source .c files (which need differentcomment types.) Finally Greg ran the script using the .csv files togenerate the patches.Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman List of files: /linux-6.15/arch/arc/boot/Makefile

27f3d2a3 - ARC: [build] Support gz, lzma compressed uImage

Tue, 04 Oct 2016 23:34:27 +0000

ARC: [build] Support gz, lzma compressed uImageAdd support for lzma compressed uImage.Support for gzip was already available but could not be enabled becausewe were missing CONFIG_HAVE_KERNEL_GZIP in arch/arc/Kconfig.Signed-off-by: Daniel Mentz Cc: linux-snps-arc@lists.infradead.orgCc: Vineet Gupta Signed-off-by: Vineet Gupta List of files: /linux-6.15/arch/arc/boot/Makefile

104058ed - ARC: [build] Allow uncompressed uImage

Fri, 22 Mar 2013 16:34:27 +0000

ARC: [build] Allow uncompressed uImageThe existing uImage target always generates gzip compressed image whichdrags bootup for some very slow FPGA customer boards.So introduce seperate make targets:uImage.{bin,gz} with uncompressedbeing default. Also tie gz generation to CONFIG_KERNEL_GZIP, which aplatform can select in it's Kconfig if it wishes gz to be default.Signed-off-by: Vineet Gupta List of files: /linux-6.15/arch/arc/boot/Makefile

fb0990bb - ARC: [build] cleanup Makefile a bit

Fri, 22 Mar 2013 14:18:01 +0000

ARC: [build] cleanup Makefile a bitSigned-off-by: Vineet Gupta List of files: /linux-6.15/arch/arc/boot/Makefile

cfdbc2e1 - ARC: Build system: Makefiles, Kconfig, Linker script

Fri, 18 Jan 2013 09:42:20 +0000

ARC: Build system: Makefiles, Kconfig, Linker scriptArnd in his review pointed out that arch Kconfig organisation has severaldeficiencies:* Build time entries for things which can be runtime extracted from DT (e.g. SDRAM size, core clk frequency..)* Not multi-platform-image-build friendly (choice .. endchoice constructs)* cpu variants support (750/770) is exclusive.The first 2 have been fixed in subsequent patches.Due to the nature of the 750 and 770, it is not possible to build forboth together, w/o special runtime glue code which would hurtperformance.Signed-off-by: Vineet Gupta Cc: Arnd Bergmann Cc: Sam Ravnborg Acked-by: Sam Ravnborg List of files: /linux-6.15/arch/arc/boot/Makefile