Changes in Makefile

26b0e75d - mlx5: Implement flow steering helper functions for TCP sockets.

Tue, 08 Feb 2022 15:08:53 +0000

mlx5: Implement flow steering helper functions for TCP sockets.This change adds convenience functions to setup a flow steering rule based ona TCP socket. The helper function gets all the address information from thesocket and returns a steering rule, to be used with HW TLS RX offload.Sponsored by: NVIDIA Networking(cherry picked from commit 2c0ade806aa7b450dc4f4c53b5345050eb6dcb4b) List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

83271c68 - Fix some modules to export more used symbols

Sun, 07 Nov 2021 08:42:24 +0000

Fix some modules to export more used symbols(cherry picked from commit 5bb3134a8c21cb87b30e135ef168483f0333dabb) List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

15fe2513 - Introduce LINUXKPI_GENSRCS.

Fri, 20 Mar 2020 21:06:58 +0000

Introduce LINUXKPI_GENSRCS.Centralize the list of generated files required by linuxkpi consumers,into the common variable. This way, consumers that use the variableare insulated from possible changes in the list.Reviewed by: hselasky, impSponsored by: Mellanox TechnologiesMFC after: 1 weekDifferential revision: https://reviews.freebsd.org/D24137 List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

91ad1bd9 - mlx5: Restore eswitch management code from attic.

Wed, 18 Mar 2020 22:30:56 +0000

mlx5: Restore eswitch management code from attic.Reviewed by: hselaskySponsored by: Mellanox TechnologiesMFC after: 2 weeks List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

84b3c454 - Add pci_iov_if.h header as a dependency for Linuxkpi consumers.

Wed, 18 Mar 2020 22:09:16 +0000

Add pci_iov_if.h header as a dependency for Linuxkpi consumers.Sponsored by: Mellanox TechnologiesMFC after: 2 weeks List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

04f1690b - Add basic support for TCP/IP based hardware TLS offload to mlx5core.

Thu, 05 Dec 2019 15:16:19 +0000

Add basic support for TCP/IP based hardware TLS offload to mlx5core.The hardware offload is primarily targeted for TLS v1.2 and v1.3,using AES 128/256 bit pre-shared keys. This patch adds all the neededhardware structures, capabilites and firmware commands.Sponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

4bc8507b - Remove no longer needed fwdump register tables from mlx5core.

Wed, 02 Oct 2019 09:43:48 +0000

Remove no longer needed fwdump register tables from mlx5core.Submitted by: kib@MFC after: 3 daysSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

66b38bfe - Add support for Multi-Physical Function Switch, MPFS, in mlx5en.

Wed, 02 Oct 2019 09:22:22 +0000

Add support for Multi-Physical Function Switch, MPFS, in mlx5en.MPFS is a logical switch in the Mellanox device which forward packetsbased on a hardware driven L2 address table, to one or more physical-or virtual- functions. The physical- or virtual- function is requiredto tell the MPFS by using the MPFS firmware commands, which unicastMAC addresses it is requesting from the physical port's traffic.Broadcast and multicast traffic however, is copied to all listeningphysical- and virtual- functions and does not need a rule in the MPFSswitching table.Linux commit: eeb66cdb682678bfd1f02a4547e3649b38ffea7eMFC after: 3 daysSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

e9dcd831 - mlx5fpga: Initial code import.

Wed, 05 Dec 2018 14:11:20 +0000

mlx5fpga: Initial code import.Submitted by: kib@Approved by: hselasky (mentor)MFC after: 1 weekSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

b575d8c8 - Refactor access to CR-space into using VSC APIs in mlx5core.

Tue, 17 Jul 2018 10:16:32 +0000

Refactor access to CR-space into using VSC APIs in mlx5core.Remove no longer used files and APIs.MFC after: 1 weekSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

38535d6c - Add support for hardware rate limiting to mlx5en(4).

Tue, 29 May 2018 14:04:57 +0000

Add support for hardware rate limiting to mlx5en(4).The hardware rate limiting feature is enabled by the RATELIMIT kerneloption. Please refer to ifconfig(8) and the txrtlmt option and theSO_MAX_PACING_RATE set socket option for more information. Thisfeature is compatible with hardware transmit send offload, TSO.A set of sysctl(8) knobs under dev.mce..rate_limit are provided tosetup the ratelimit table and also to fine tune various rate limitrelated parameters.Sponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

f20b553d - Add mutual exclusion mechanism for software reset of firmware in mlx5core.

Fri, 23 Mar 2018 18:32:03 +0000

Add mutual exclusion mechanism for software reset of firmware in mlx5core.Since the FW can be shared between PCI functions it is common thatmore than one health poll will detected a failure, this can lead tomultiple resets.The solution is to use a FW locking mechanism using semaphore space toprovide a way to synchronize between functions. The FW semaphore isacquired via config cycle access. First the VSEC gateway must beacquired, then the semaphore can be locked by writing a value to itand confirmed it's locked by reading the same value back. The processin the same to free the semaphore, except the value written should bezero.Submitted by: slavash@MFC after: 1 weekSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

e808190a - Add kernel and userspace code to dump the firmware state of supported

Thu, 08 Mar 2018 15:21:56 +0000

Add kernel and userspace code to dump the firmware state of supportedConnectX-4/5 devices in mlx5core.The dump is obtained by reading a predefined register map from thenon-destructive crspace, accessible by the vendor-specific PCIecapability (VSC). The dump is stored in preallocated kernel memory andmanaged by the mlx5tool(8), which communicates with the driver using acharacter device node.The utility allows to store the dump in format

into a file, to reset the dump content, and to manually initiate thedump.A call to mlx5_fwdump() should be added at the places where a dumpmust be fetched automatically. The most likely place is right before afirmware reset request.Submitted by: kib@MFC after: 1 weekSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

4b95c665 - Add vendor specific capability interface support in mlx5core.

Thu, 08 Mar 2018 11:59:47 +0000

Add vendor specific capability interface support in mlx5core.Add the ability to access the vendor specific space gateway in orderto support reading and writing data into the different configurationdomains.Submitted by: Matthew Finlay MFC after: 1 weekSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

5a93b4cd - Refactor the flowsteering APIs used by mlx5en(4). This change is needed by

Fri, 10 Nov 2017 09:49:08 +0000

Refactor the flowsteering APIs used by mlx5en(4). This change is needed bythe coming ibcore and mlx5ib updates in order to support traffic redirectionto so-called raw ethernet QPs.Remove unused E-switch related routines and files while at it.Sponsored by: Mellanox TechnologiesMFC after: 1 week List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

193d9e76 - sys/modules: normalize .CURDIR-relative paths to SRCTOP

Sat, 04 Mar 2017 10:10:17 +0000

sys/modules: normalize .CURDIR-relative paths to SRCTOPThis simplifies make output/logicTested with: `cd sys/modules; make ALL_MODULES=` on amd64MFC after: 1 monthSponsored by: Dell EMC Isilon List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

66d53750 - Add support for reading advanced diagnostic counters.

Fri, 27 Jan 2017 10:03:50 +0000

Add support for reading advanced diagnostic counters.By default reading the diagnostic counters is disabled. The firmwaredecides which counters are supported and only those supported show upin the dev.mce.X.diagnostics sysctl tree.To enable reading of diagnostic counters set one or more of thefollowing sysctls to one:dev.mce.X.conf.diag_general_enable=1dev.mce.X.conf.diag_pci_enable=1MFC after: 1 weekSponsored by: Mellanox Technologies List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

1a27b3ad - opt_random.h was removed in r287558 for opt_global.h

Wed, 27 Jul 2016 20:44:53 +0000

opt_random.h was removed in r287558 for opt_global.hMFC after: 3 daysSponsored by: EMC / Isilon Storage Division List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

98a998d5 - Update the mlx5 shared driver code to the latest version, which

Mon, 07 Dec 2015 13:16:48 +0000

Update the mlx5 shared driver code to the latest version, whichinclude the following list of changes:- Added eswitch ACL table management Introduce API for managing ACL table. This API include the following features: 1) vlan filter - for VST/VGT+ support. 2) spoofcheck. 3) robust functionality to allow/drop general untagged/tagged traffic. 4) support for both ingress and egress ACL types.- Added loopback filter to the vacl table.- Added multicast list set in the vPort context- Added promiscuous mode set in the vPort context- Set the vlan list in vPort context 1) Check caps if VLAN list is not longer than FW supports 2) Set MODIFY_NIC_VPORT_CONTEXT command- Changed MLX5_EEPROM_MAX_BYTES from 48 to 32 so that a single EEPROM reading cannot cross the 128-byte boundary. Previously reading the MCIA register was done in batches of 48 bytes. The third reading would then by-pass the 127th byte, which means that part of the low page and part of the high page would be read at the same time, which created a bug: 1st: 0-47 bytes 2nd: 48-95 bytes 3rd: 96-143 bytesMFC after: 1 weekSponsored by: Mellanox TechnologiesDifferential Revision: https://reviews.freebsd.org/D4411 List of files: /freebsd-13.1/sys/modules/mlx5/Makefile

278ce1c9 - Add full support for Receive Side Scaling, RSS, to the mlx5en

Mon, 07 Dec 2015 12:38:51 +0000

Add full support for Receive Side Scaling, RSS, to the mlx5endriver. This includes binding all interrupt and worker threadsaccording to the RSS configuration, setting up correct Toeplitzhashing keys as given by RSS and setting the correct mbufhashtype for all received traffic.MFC after: 1 weekSponsored by: Mellanox TechnologiesDifferential Revision: https://reviews.freebsd.org/D4410 List of files: /freebsd-13.1/sys/modules/mlx5/Makefile