Changes in std.XLP

fdbb2410 - Add 'gpio' since mmc now requires gpio_if.h.

Thu, 16 Apr 2020 20:45:54 +0000

Add 'gpio' since mmc now requires gpio_if.h. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

c363b16c - sys: Remove DEV_RANDOM device option

Fri, 21 Jun 2019 00:16:30 +0000

sys: Remove DEV_RANDOM device optionRemove 'device random' from kernel configurations that reference it (most).Replace perhaps mistaken 'nodevice random' in two MIPS configs with 'optionsRANDOM_LOADABLE' instead. Document removal in UPDATING; update NOTES andrandom.4.Reviewed by: delphij, markm (previous version)Approved by: secteam(delphij)Differential Revision: https://reviews.freebsd.org/D19918 List of files: /freebsd-13.1/sys/mips/conf/std.XLP

e8643b01 - Modularize xz.

Tue, 26 Feb 2019 19:55:03 +0000

Modularize xz.Embedded lzma decompression library becomes a module usable by otherconsumers, in addition to geom_uzip.Most important code changes are- removal of XZ_DEC_SINGLE define, we need the code to work with XZ_DEC_DYNALLOC;- xz_crc32_init() call is removed from geom_uzip, xz module handles initialization on its own.xz is no longer embedded into geom_uzip, instead the depend line forthe module is provided, and corresponding kernel option is added toeach MIPS kernel config file using geom_uzip.The commit also carries unrelated cleanup by removing excess "device geom_uzip"in places which were missed in r344479.Reviewed by: cem, hselasky, ray, slavash (previous versions)Sponsored by: Mellanox TechnologiesDifferential revision: https://reviews.freebsd.org/D19266MFC after: 3 weeks List of files: /freebsd-13.1/sys/mips/conf/std.XLP

c75f49f7 - Make iflib a loadable module.

Thu, 31 Jan 2019 19:05:56 +0000

Make iflib a loadable module.iflib is already a module, but it is unconditionally compiled into thekernel. There are drivers which do not need iflib(4), and there aresituations where somebody might not want iflib in kernel because ofusing the corresponding driver as module.Reviewed by: mariusDiscussed with: erjSponsored by: The FreeBSD FoundationMFC after: 2 weeksDifferential revision: https://reviews.freebsd.org/D19041 List of files: /freebsd-13.1/sys/mips/conf/std.XLP

90cff13c - Remove the old ds1374 driver and use the ds13rtc driver instead. Adjust

Sun, 13 Aug 2017 22:07:42 +0000

Remove the old ds1374 driver and use the ds13rtc driver instead. Adjustseveral mips config files accordingly. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

bd79708d - In the TCP stack, the hhook(9) framework provides hooks for kernel modules

Wed, 12 Oct 2016 02:16:42 +0000

In the TCP stack, the hhook(9) framework provides hooks for kernel modulesto add actions that run when a TCP frame is sent or received on a TCPsession in the ESTABLISHED state. In the base tree, this functionality isonly used for the h_ertt module, which is used by the cc_cdg, cc_chd, cc_hd,and cc_vegas congestion control modules.Presently, we incur overhead to check for hooks each time a TCP frame issent or received on an ESTABLISHED TCP session.This change adds a new compile-time option (TCP_HHOOK) to determine whetherto include the hhook(9) framework for TCP. To retain backwardscompatibility, I added the TCP_HHOOK option to every configuration file thatalready defined "options INET". (Therefore, this patch introduces nofunctional change. In order to see a functional difference, you need tocompile a custom kernel without the TCP_HHOOK option.) This change willallow users to easily exclude this functionality from their kernel, shouldthey wish to do so.Note that any users who use a custom kernel configuration and use one of thecongestion control modules listed above will need to add the TCP_HHOOKoption to their kernel configuration.Reviewed by: rrs, lstewart, hiren (previous version), sjg (makefiles only)Sponsored by: NetflixDifferential Revision: https://reviews.freebsd.org/D8185 List of files: /freebsd-13.1/sys/mips/conf/std.XLP

d4f95c88 - In kernel config files, it is supposed to be 'options' not

Tue, 18 Mar 2014 14:41:18 +0000

In kernel config files, it is supposed to be 'options' not'options', per long standing (but recently not so strictlyenforced) convention. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

0e6a0799 - Back out r253779 & r253786.

Wed, 31 Jul 2013 17:21:18 +0000

Back out r253779 & r253786. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

99ff83da - Decouple yarrow from random(4) device.

Mon, 29 Jul 2013 20:26:27 +0000

Decouple yarrow from random(4) device.* Make Yarrow an optional kernel component -- enabled by "YARROW_RNG" option. The files sha2.c, hash.c, randomdev_soft.c and yarrow.c comprise yarrow.* random(4) device doesn't really depend on rijndael-*. Yarrow, however, does.* Add random_adaptors.[ch] which is basically a store of random_adaptor's. random_adaptor is basically an adapter that plugs in to random(4). random_adaptor can only be plugged in to random(4) very early in bootup. Unplugging random_adaptor from random(4) is not supported, and is probably a bad idea anyway, due to potential loss of entropy pools. We currently have 3 random_adaptors: + yarrow + rdrand (ivy.c) + nehemeiah* Remove platform dependent logic from probe.c, and move it into corresponding registration routines of each random_adaptor provider. probe.c doesn't do anything other than picking a specific random_adaptor from a list of registered ones.* If the kernel doesn't have any random_adaptor adapters present then the creation of /dev/random is postponed until next random_adaptor is kldload'ed.* Fix randomdev_soft.c to refer to its own random_adaptor, instead of a system wide one.Submitted by: arthurmesh@gmail.com, obrienObtained from: Juniper NetworksReviewed by: obrien List of files: /freebsd-13.1/sys/mips/conf/std.XLP

45f6d665 - Remove all legacy ATA code parts, not used since options ATA_CAM enabled in

Thu, 04 Apr 2013 07:12:24 +0000

Remove all legacy ATA code parts, not used since options ATA_CAM enabled inmost kernels before FreeBSD 9.0. Remove such modules and respective kerneloptions: atadisk, ataraid, atapicd, atapifd, atapist, atapicam. Remove theatacontrol utility and some man pages. Remove useless now options ATA_CAM.No objections: current@, stable@MFC after: never List of files: /freebsd-13.1/sys/mips/conf/std.XLP

4b3aada9 - Resource allocation for XLP SoC SDHCI slots

Tue, 27 Mar 2012 15:43:32 +0000

Resource allocation for XLP SoC SDHCI slotsThe on-chip SD slots do not have PCI BARs corresponding to them, sothis has to be handled in the custom SoC memory allocation.Provide memory resource for rids corresponding to BAR 0 and 1 inthe custom allocation code. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

2652f84c - NOR flash driver for XLP.

Tue, 27 Mar 2012 15:16:38 +0000

NOR flash driver for XLP.The NOR interface on the SoC appears on the top level PCI bus. Adda simple driver for this. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

35011d20 - xlpge : driver for XLP network accelerator

Tue, 27 Mar 2012 14:05:12 +0000

xlpge : driver for XLP network acceleratorFeatures:- network driver for the four 10G interfaces and two management ports on XLP 8xx.- Support 4xx and 3xx variants of the processor.- Source code and firmware building for the 16 mips32r2 micro-code engines in the Network Accelerator.- Basic initialization code for Packet ordering Engine.Submitted by: Prabhath Raman (prabhath at netlogicmicro com) [refactored and fixed up for style by jchandra] List of files: /freebsd-13.1/sys/mips/conf/std.XLP

9b4d1406 - Opencrypto driver for XLP Security and RSA/ECC blocks

Tue, 27 Mar 2012 11:43:46 +0000

Opencrypto driver for XLP Security and RSA/ECC blocksSupport for the Security and RSA blocks on XLP SoC. Even thoughthe XLP supports many more algorithms, only the ones supportedin OCF have been added.Submitted by: Venkatesh J. V. (venkatesh at netlogicmicro com) List of files: /freebsd-13.1/sys/mips/conf/std.XLP

8f57f9e0 - I2C support for XLP, add hints for I2C devices and update PCI resource

Tue, 27 Mar 2012 11:17:04 +0000

I2C support for XLP, add hints for I2C devices and update PCI resourceallocation code. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

92396a31 - Remove pty(4) from our kernel configurations.

Wed, 21 Mar 2012 08:38:42 +0000

Remove pty(4) from our kernel configurations.As of FreeBSD 8, this driver should not be used. Applications that useposix_openpt(2) and openpty(3) use the pts(4) that is built into thekernel unconditionally. If it turns out high profile depend on thepty(4) module anyway, I'd rather get those fixed. So please report anyissues to me.The pty(4) module is still available as a kernel module of course, so asimple `kldload pty' can be used to run old-style pseudo-terminals. List of files: /freebsd-13.1/sys/mips/conf/std.XLP

f48a19aa - Fix USB compilation, and add USB options to XLP conf

Sat, 19 Nov 2011 14:33:14 +0000

Fix USB compilation, and add USB options to XLP confRemove obsolete header file included in usb_init.c List of files: /freebsd-13.1/sys/mips/conf/std.XLP

c82deda3 - Rearrange XLP configuration files.

Fri, 18 Nov 2011 11:18:59 +0000

Rearrange XLP configuration files.Create std.XLP for configuration options, which is included by theconf files. The files XLP, XLPN32 and XLP64 will have mostly ABI relatedoptions.Also move uart and pci to mips/nlm/std.xlp since all XLP configurationsneeds these devices.Obtained from: prabhath at netlogicmicro com (intial version) List of files: /freebsd-13.1/sys/mips/conf/std.XLP