Changes in miidevs

54aa95f0 - mii: update URL for OUIs

Tue, 09 Nov 2021 21:35:45 +0000

mii: update URL for OUIsUpdate the URL for OUIs as the old one is 404 not even 301 anymore.(cherry picked from commit 8e902c1d21a74c82ffef9f104eb31b213f79f1db) List of files: /freebsd-13.1/sys/dev/mii/miidevs

349eddbd - Add support for bcm54213PE in brgphy.

Thu, 18 Jun 2020 23:57:10 +0000

Add support for bcm54213PE in brgphy.This chip is used in the Rasperry Pi 4, and is supported by the if_genetdriver. Currently we use the ukphy mii driver, this patch switches overto the brgphy mii driver instead. To support the rgmii-rxid phy mode,which is now the default in the Linux dtb, we add support for clockskewing.These changes are taken from OpenBSD and NetBSD, except for the bailoutin brgphy_bcm54xx_clock_delay() in rgmii mode, which was found necessaryafter testing.Submitted by: Robert Crowston, crowston at protomail.comDifferential Revision: https://reviews.freebsd.org/D25251 List of files: /freebsd-13.1/sys/dev/mii/miidevs

b24db8a4 - Add support for BCM54618SE PHY

Thu, 09 Apr 2020 21:24:17 +0000

Add support for BCM54618SE PHYMFC after: 3 daysSponsored by: Juniper Networks, Inc List of files: /freebsd-13.1/sys/dev/mii/miidevs

159f344b - Recognize ICS1893C PHYs.

Tue, 07 Aug 2018 17:13:42 +0000

Recognize ICS1893C PHYs.Submitted by: Sebastian Huber MFC after: 1 week List of files: /freebsd-13.1/sys/dev/mii/miidevs

b6803171 - Add a driver for the Vitesse/Microsemi VSC8501 PHY.

Sun, 11 Jun 2017 00:38:16 +0000

Add a driver for the Vitesse/Microsemi VSC8501 PHY. List of files: /freebsd-13.1/sys/dev/mii/miidevs

e8b1516a - Add support for the Micrel KSZ8081 ethernet PHY.

Sun, 16 Apr 2017 01:40:17 +0000

Add support for the Micrel KSZ8081 ethernet PHY.The only thing this phy needs that the ukphy driver doesn't provide isthat the value in the proprietary Phy Control 2 Register must be savedbefore doing a soft reset and restored afterwards. Most modern phys have"sticky bits" for low-level config that survive a reset, but on this onethe values in all registers go back to defaults, wiping out any board-specific config set up by the bootloader/bios/whatever. List of files: /freebsd-13.1/sys/dev/mii/miidevs

a24d62b5 - Add preliminary support for the RTL8153.

Mon, 31 Oct 2016 05:58:11 +0000

Add preliminary support for the RTL8153.Reviewed by: hselasky List of files: /freebsd-13.1/sys/dev/mii/miidevs

67a48226 - Add support for the Microchip/Micrel KSZ9031 Gigabit Ethernet PHY.

Sat, 23 Jul 2016 18:16:40 +0000

Add support for the Microchip/Micrel KSZ9031 Gigabit Ethernet PHY.Tested on uBMC and uFW.Sponsored by: Rubicon Communications (Netgate) List of files: /freebsd-13.1/sys/dev/mii/miidevs

fe56b741 - Add support for Atmel at25df641 flash

Wed, 08 Jun 2016 14:22:16 +0000

Add support for Atmel at25df641 flashSubmitted by: Grégory Soutadé (via github pull request) List of files: /freebsd-13.1/sys/dev/mii/miidevs

d751decc - Add more BCM gigabit PHYs

Fri, 04 Sep 2015 17:48:19 +0000

Add more BCM gigabit PHYsGleaned from a public header file. 5402 and 5404 look like they may beused on embedded devices. 5478 and 5488 are switch PHYs. 5754 change is justto note a product alias.Differential Revision: https://reviews.freebsd.org/D3338Submitted by: kevin.bowling@kev009.com List of files: /freebsd-13.1/sys/dev/mii/miidevs

e0fe6b48 - Add support for BCM5466 PHY

Wed, 29 Jul 2015 20:50:48 +0000

Add support for BCM5466 PHYDifferential Revision: D3232Submitted by: kevin.bowling@kev009.com List of files: /freebsd-13.1/sys/dev/mii/miidevs

8b62915e - Add driver for Micrel KSZ9021 Gigabit Ethernet Transceiver (PHY).

Tue, 21 Oct 2014 09:14:16 +0000

Add driver for Micrel KSZ9021 Gigabit Ethernet Transceiver (PHY).Sponsored by: DARPA, AFRL List of files: /freebsd-13.1/sys/dev/mii/miidevs

f26725de - Add definition for the Atheros 8021 gigabit PHY.

Wed, 06 Nov 2013 16:28:26 +0000

Add definition for the Atheros 8021 gigabit PHY.MFC after: 1 week List of files: /freebsd-13.1/sys/dev/mii/miidevs

cd10b400 - Add support for new Gigabit PHY of RealTek.

Tue, 29 Oct 2013 05:14:38 +0000

Add support for new Gigabit PHY of RealTek.I don't have a copy of data sheet so I'm not sure exact PHY modelname. Vendor's web page indicates RTL8251 is latest PHY so I usedthe name. This PHY is used with RTL8168G, RTL8168GU and RTL8411B. List of files: /freebsd-13.1/sys/dev/mii/miidevs

0bee427e - Recognize BCM5725C PHY.

Sat, 20 Jul 2013 07:24:01 +0000

Recognize BCM5725C PHY. List of files: /freebsd-13.1/sys/dev/mii/miidevs

0a75559c - Recognize 5720S PHY and treat it as 5708S PHY.

Thu, 20 Dec 2012 05:02:12 +0000

Recognize 5720S PHY and treat it as 5708S PHY.Unfortunately 5720S uses 5709S PHY id so add a hack to detect 5720SPHY by checking parent device name. 5720S PHY does not support 2500SX.Tested by: Geans Pin < geanspin <> broadcom dot com > List of files: /freebsd-13.1/sys/dev/mii/miidevs

b011f8c4 - Merging of projects/armv6, part 5

Wed, 15 Aug 2012 04:03:55 +0000

Merging of projects/armv6, part 5- Driver for SMSC LAN95XX and LAN8710A ethernet controllers- Driver for LAN8710A PHYSubmitted by: Ben Gray, Damjan Marion, Tim Kientzle List of files: /freebsd-13.1/sys/dev/mii/miidevs

9994219b - More Cicada/Vitesse PHY ids.

Fri, 25 May 2012 15:05:17 +0000

More Cicada/Vitesse PHY ids.Obtained from: Semihalf List of files: /freebsd-13.1/sys/dev/mii/miidevs

4bcbb398 - Probe the National DP83849, which is a dual-port version of the PHYTER.

Sun, 19 Feb 2012 12:25:58 +0000

Probe the National DP83849, which is a dual-port version of the PHYTER.Obtained from: NetBSD List of files: /freebsd-13.1/sys/dev/mii/miidevs

8a731a12 - - Probe BCM57780.

Sun, 19 Feb 2012 12:09:17 +0000

- Probe BCM57780.- In case the parent is bge(4), don't set the Jumbo frame settings unless the MAC actually is Jumbo capable as otherwise the PHY might not have the corresponding registers implemented. This is also in line with what the Linux tg3 driver does.PR: 165032Submitted by: Alexander MilanovObtained from: OpenBSDMFC after: 3 days List of files: /freebsd-13.1/sys/dev/mii/miidevs