Changes in scsi_modes

627c3a8d - Add Timeout and Protect mode page description from MMC-6.

Wed, 25 Jan 2017 11:47:16 +0000

Add Timeout and Protect mode page description from MMC-6.MFC after: 2 weeks List of files: /freebsd-13.1/share/misc/scsi_modes

54644e21 - Make 'camcontrol modepage' support subpages.

Sat, 07 Jan 2017 09:56:12 +0000

Make 'camcontrol modepage' support subpages.MFC after: 2 weeks List of files: /freebsd-13.1/share/misc/scsi_modes

1cfaa2aa - Add some more mode page fields.

Fri, 06 Jan 2017 13:12:56 +0000

Add some more mode page fields.MFC after: 2 weeks List of files: /freebsd-13.1/share/misc/scsi_modes

d53226d7 - Use 't' (bit-field) not 'b' (bit-sized integral type) for describing MRIE (aka

Sun, 25 Oct 2015 04:04:25 +0000

Use 't' (bit-field) not 'b' (bit-sized integral type) for describing MRIE (aka"Method of Reporting Informational Exceptions") in the SCSI mode database.T10/04-371 revision 2 (revision 4; page 2, table 1) describes it as abit-field of 4 bits wide.1. http://www.t10.org/ftp/t10/document.04/04-371r2.pdfThis a recommit of head@r289913 to fix the original commit message, inparticular:- I incorrectly claimed that unit change was 'i' -> 't'.- The spec I reference in this commit is 2 decades newer than the one noted in r289913. The fields in the SCSI mode database are more complete in the newer spec, so it'll be easier for someone to decipher this commit if need be later.- I screwed up the bug entry in the previous commit messagePointyhat to: ngie (for botching up r289913)PR: 200619Reported by: Michael BaptistSubmitted by: Lars SkodjeSponsored by: EMC / Isilon Storage Divisionf List of files: /freebsd-13.1/share/misc/scsi_modes

e54187eb - Revert r289913 -- I botched up the commit message by accident

Sun, 25 Oct 2015 03:22:21 +0000

Revert r289913 -- I botched up the commit message by accidentWill redo the commit shortly List of files: /freebsd-13.1/share/misc/scsi_modes

93709850 - Use 't' (bits) not 'i' (bytes) for describing MRIE (aka

Sun, 25 Oct 2015 03:16:08 +0000

Use 't' (bits) not 'i' (bytes) for describing MRIE (aka"Method of Reporting Informational Exceptions") in the SCSI mode database asthe field described in X3T10/94-190 (revision 4; page 2, table 1) [1.] is4 bits wide, not 4 bytes wide1. http://ftp.t10.org/ftp/t10/document.94/94-190r4.pdfBug 200619MFC after: 1 weekReported by: Michael Baptist Submitted by: Lars Skodje Sponsored by: EMC / Isilon Storage Division List of files: /freebsd-13.1/share/misc/scsi_modes

ec05088b - Add LBPERE mode bit definition.

Tue, 14 Oct 2014 08:30:02 +0000

Add LBPERE mode bit definition. List of files: /freebsd-13.1/share/misc/scsi_modes

d151862b - Add some more SCSI mode pages from SPC-4 spec.

Tue, 17 Apr 2012 11:13:03 +0000

Add some more SCSI mode pages from SPC-4 spec.MFC after: 1 week List of files: /freebsd-13.1/share/misc/scsi_modes

1cc052e8 - Add descriptor sense support to CAM, and honor sense residuals properly in

Mon, 03 Oct 2011 20:32:55 +0000

Add descriptor sense support to CAM, and honor sense residuals properly inCAM.Desriptor sense is a new sense data format that originated in SPC-3. Amongother things, it allows for an 8-byte info field, which is necessary topass back block numbers larger than 4 bytes.This change adds a number of new functions to scsi_all.c (and thereforelibcam) that abstract out most access to sense data.This includes a bump of CAM_VERSION, because the CCB ABI has changed.Userland programs that use the CAM pass(4) driver will need to berecompiled.camcontrol.c: Change uses of scsi_extract_sense() to use scsi_extract_sense_len(). Use scsi_get_sks() instead of accessing sense key specific data directly.scsi_modes: Update the control mode page to the latest version (SPC-4).scsi_cmds.c,scsi_target.c: Change references to struct scsi_sense_data to struct scsi_sense_data_fixed. This should be changed to allow the user to specify fixed or descriptor sense, and then use scsi_set_sense_data() to build the sense data.ps3cdrom.c: Use scsi_set_sense_data() instead of setting sense data manually.cam_periph.c: Use scsi_extract_sense_len() instead of using scsi_extract_sense() or accessing sense data directly.cam_ccb.h: Bump the CAM_VERSION from 0x15 to 0x16. The change of struct scsi_sense_data from 32 to 252 bytes changes the size of struct ccb_scsiio, but not the size of union ccb. So the version must be bumped to prevent structure mis-matches.scsi_all.h: Lots of updated SCSI sense data and other structures. Add function prototypes for the new sense data functions. Take out the inline implementation of scsi_extract_sense(). It is now too large to put in a header file. Add macros to calculate whether fields are present and filled in fixed and descriptor sense datascsi_all.c: In scsi_op_desc(), allow the user to pass in NULL inquiry data, and we'll assume a direct access device in that case. Changed the SCSI RESERVED sense key name and description to COMPLETED, as it is now defined in the spec. Change the error recovery action for a number of read errors to prevent lots of retries when the drive has said that the block isn't accessible. This speeds up reconstruction of the block by any RAID software running on top of the drive (e.g. ZFS). In scsi_sense_desc(), allow for invalid sense key numbers. This allows calling this routine without checking the input values first. Change scsi_error_action() to use scsi_extract_sense_len(), and handle things when invalid asc/ascq values are encountered. Add a new routine, scsi_desc_iterate(), that will call the supplied function for every descriptor in descriptor format sense data. Add scsi_set_sense_data(), and scsi_set_sense_data_va(), which build descriptor and fixed format sense data. They currently default to fixed format sense data. Add a number of scsi_get_*() functions, which get different types of sense data fields from either fixed or descriptor format sense data, if the data is present. Add a number of scsi_*_sbuf() functions, which print formatted versions of various sense data fields. These functions work for either fixed or descriptor sense. Add a number of scsi_sense_*_sbuf() functions, which have a standard calling interface and print the indicated field. These functions take descriptors only. Add scsi_sense_desc_sbuf(), which will print a formatted version of the given sense descriptor. Pull out a majority of the scsi_sense_sbuf() function and put it into scsi_sense_only_sbuf(). This allows callers that don't use struct ccb_scsiio to easily utilize the printing routines. Revamp that function to handle descriptor sense and use the new sense fetching and printing routines. Move scsi_extract_sense() into scsi_all.c, and implement it in terms of the new function, scsi_extract_sense_len(). The _len() version takes a length (which should be the sense length - residual) and can indicate which fields are present and valid in the sense data. Add a couple of new scsi_get_*() routines to get the sense key, asc, and ascq only.mly.c: Rename struct scsi_sense_data to struct scsi_sense_data_fixed.sbp_targ.c: Use the new sense fetching routines to get sense data instead of accessing it directly.sbp.c: Change the firewire/SCSI sense data transformation code to use struct scsi_sense_data_fixed instead of struct scsi_sense_data. This should be changed later to use scsi_set_sense_data().ciss.c: Calculate the sense residual properly. Use scsi_get_sense_key() to fetch the sense key.mps_sas.c,mpt_cam.c: Set the sense residual properly.iir.c: Use scsi_set_sense_data() instead of building sense data by hand.iscsi_subr.c: Use scsi_extract_sense_len() instead of grabbing sense data directly.umass.c: Use scsi_set_sense_data() to build sense data. Grab the sense key using scsi_get_sense_key(). Calculate the sense residual properly.isp_freebsd.h: Use scsi_get_*() routines to grab asc, ascq, and sense key values. Calculate and set the sense residual.MFC after: 3 daysSponsored by: Spectra Logic Corporation List of files: /freebsd-13.1/share/misc/scsi_modes

e023b6f9 - Add mode page 0x1b, "Removable Block Access Capacities". This mode page is

Tue, 12 Oct 2004 08:51:04 +0000

Add mode page 0x1b, "Removable Block Access Capacities". This mode page isimplemented by USB floppy devices using the UFI command set.Reviewed by: ken, scottlSource: USB Mass Storage UFI Specification v1.0MFC after: 2 weeks List of files: /freebsd-13.1/share/misc/scsi_modes

55626753 - Add a definition for mode page 0x2a "CD capabilities and mechanical

Sun, 24 Feb 2002 13:27:57 +0000

Add a definition for mode page 0x2a "CD capabilities and mechanicalstatus page". List of files: /freebsd-13.1/share/misc/scsi_modes

a1d80830 - Include the Power Control page (0x1a) that is standardized by SCSI-3.

Tue, 22 May 2001 12:37:50 +0000

Include the Power Control page (0x1a) that is standardized by SCSI-3.At least some IBM drives support the Standby Condition Timer (i. e.they allow for an automatic spindown).Update copyright for 2001. I don't want to insert my name for justone mode page definition, do people think that `The FreeBSD Project'is OK? List of files: /freebsd-13.1/share/misc/scsi_modes

da731ada - fix minor oops in new data compression page definition

Sun, 29 Oct 2000 00:54:59 +0000

fix minor oops in new data compression page definition List of files: /freebsd-13.1/share/misc/scsi_modes

14a78063 - Add 3 SCSI-3 bits for Sequential Access Device Congifuration Page.

Sat, 28 Oct 2000 22:47:47 +0000

Add 3 SCSI-3 bits for Sequential Access Device Congifuration Page.Add Data Compression Page (SCSI-3). Add some clarifying commentsat the top of the file that say what the syntax is. List of files: /freebsd-13.1/share/misc/scsi_modes

7e32b20d - This is an overhaul of the mode page handling in camcontrol as well as

Tue, 08 Aug 2000 06:24:17 +0000

This is an overhaul of the mode page handling in camcontrol as well asrelated patches. These include: * Mode page editting can be scripted. This involves two things: first, if stdin is not a tty, changes are read from stdin rather than invoking $EDITOR. Second, and more importantly, not all modepage entries must be included in the change set. This means that camcontrol can now gracefully handle more intrusive editting from the $EDITOR, including removal or rearrangement of lines. It also means that you can do stuff like: # echo "WCE: 1" | camcontrol modepage da3 -m 8 -e # newfs /dev/da3 # echo "WCE: 0" | camcontrol modepage da3 -m 8 -e * Range-checking on user-supplied input values. modeedit.c now uses the field width specifiers to determine the maximum allowable value for a field. If the user enters a value larger than the maximum, it clips the value to the max and warns the user. This also involved patching cam_cmdparse.c to be more consistent with regards to the "count" parameter to arg_put (previously is was the length of strings and 1 for all integral types). The cam_cdbparse(3) man page was also updated to reflect the revised semantics. * In the process, I removed the 64 entry limit on mode pages (not that we were even close to hitting that limit). This was a nice side-effect of the other changes. * Technically, the new mode editting functionality allows editting of character array entries in mode pages (type 'c' or 'z'), however since buff_encode doesn't grok them it is currently useless. * Camcontrol gained two new options related to mode pages: -l and -b. The former lists all available mode pages for a given device. The latter forces mode page display in binary format (the default when no mode page definition was found in scsi_modes). * Added support for mode page names to scsi_modes. Allows names to be displayed alongside mode numbers in the mode page listing. Updated scsi_modes to use the new functionality. This also adds the semicolon into the scsi_modes syntax as an optional mode page definition terminator. This is needed to name pages without providing a page format definition. * Updated scsi_all.h to include a structure describing mode page headers. * Added $FreeBSD$ line to scsi_modes.Inspired by: dwhiteReviewed by: ken List of files: /freebsd-13.1/share/misc/scsi_modes

0ee6e540 - Add some extra flags in the caching page.

Fri, 05 Dec 1997 22:14:15 +0000

Add some extra flags in the caching page.Some firmware versions becomes unreliable when these bits are not preserved,e.g. ST15150N-0017 breaks if the DISC bit is cleared in the caching page.This happened by default when editing the page. List of files: /freebsd-13.1/share/misc/scsi_modes

459cd7dc - Add page 0x10 (Device Configuration Page for sequential-access devices).

Fri, 17 Jan 1997 18:55:53 +0000

Add page 0x10 (Device Configuration Page for sequential-access devices). List of files: /freebsd-13.1/share/misc/scsi_modes

e2fbcabd - Fix a spelling error.

Wed, 21 Aug 1996 22:38:20 +0000

Fix a spelling error. List of files: /freebsd-13.1/share/misc/scsi_modes

647d6579 - Add the ``CD-ROM Audio Control Parameter Page''.

Thu, 28 Dec 1995 14:24:08 +0000

Add the ``CD-ROM Audio Control Parameter Page''. List of files: /freebsd-13.1/share/misc/scsi_modes

314a2585 - New modes file needed for mode editor. "b" can not stand for bit fields.

Fri, 05 May 1995 20:43:46 +0000

New modes file needed for mode editor. "b" can not stand for bit fields. List of files: /freebsd-13.1/share/misc/scsi_modes