Changes in RPI2

49a49b37 - Move options INTRNG into std.armv6 and std.armv7

Mon, 20 Aug 2018 20:31:53 +0000

Move options INTRNG into std.armv6 and std.armv7INTRNG is required on all armv6 and armv7 systems, so make itstandard. List of files: /freebsd-12.1/sys/arm/conf/RPI2

91cc58af - [rpi] Add fdt_pinctrl(4) support to Raspberry Pi GPIO driver

Sun, 08 Apr 2018 00:56:19 +0000

[rpi] Add fdt_pinctrl(4) support to Raspberry Pi GPIO driverOn Raspberry Pi platform GPIO controller also responsible for pinsmultiplexing. Pi code predates proper FDT support in FreeBSD so alot of pinmux info is hardcoded. This patch:- Implements pinctl methods in bcm2835_gpio- Converts all devices with ad-hoc pinmux info to proper pin control mechanisms and adds pinmux info in FreeBSD's custom dts files.- Adds fdt_pinctrl option to RPI2 and RPI-B kernels- Adds SPI pinmux config to FreeBSD's customization of GNU DTS.Reviewed by: imp, manuDifferential Revision: https://reviews.freebsd.org/D14104 List of files: /freebsd-12.1/sys/arm/conf/RPI2

a2aef24a - Update several more URLs

Sun, 29 Oct 2017 08:17:03 +0000

Update several more URLs- Primarily http -> https- Primarily FreeBSD project URLs List of files: /freebsd-12.1/sys/arm/conf/RPI2

094fc1ed - Tag all armv7 kernels as such in their machine config line.

Thu, 05 Oct 2017 23:01:50 +0000

Tag all armv7 kernels as such in their machine config line.Transition all boards that support arm cortex CPUs to armv7. Thisleaves two armv6 kernels in the tree. RPI-B, which uses the BCM2835which has a ARM1176 core, and VERSATILEPB, which is a qemu board setuparound the time RPI-B went in. Copy std.armv6 to std.armv7, eventhough that duplicates a lot of stuff. More work needs to be done tosort out the duplication.Differential Revision: https://reviews.freebsd.org/D12027 List of files: /freebsd-12.1/sys/arm/conf/RPI2

9ce763a0 - Remove the MULTIDELAY option from arm. It's now enabled when PLATFORM is

Fri, 07 Jul 2017 13:55:11 +0000

Remove the MULTIDELAY option from arm. It's now enabled when PLATFORM isenabled. List of files: /freebsd-12.1/sys/arm/conf/RPI2

3d814b4c - Remove PLATFORM_SMP. It's unneeded as all configs with both PLATFORM and

Tue, 04 Jul 2017 16:52:55 +0000

Remove PLATFORM_SMP. It's unneeded as all configs with both PLATFORM andSMP use it so we can switch to the combination of these as the check. List of files: /freebsd-12.1/sys/arm/conf/RPI2

cb1b0068 - Start to deorbit the kernel configs in GENERIC by marking them with

Mon, 07 Nov 2016 10:26:44 +0000

Start to deorbit the kernel configs in GENERIC by marking them withNO_UNIVERSE. This stops them from being built with the universe,tinderbox, and related targets.Sponsored by: ABT Systems Ltd List of files: /freebsd-12.1/sys/arm/conf/RPI2

2abb9b42 - Add rpi_ft5406 module and add it to extra modules in Raspberry Pi configs

Mon, 03 Oct 2016 01:08:34 +0000

Add rpi_ft5406 module and add it to extra modules in Raspberry Pi configs List of files: /freebsd-12.1/sys/arm/conf/RPI2

d654c805 - RPI2: Add support for MULTIDELAY, this is needed for inclusion into GENERIC.

Fri, 30 Sep 2016 10:21:04 +0000

RPI2: Add support for MULTIDELAY, this is needed for inclusion into GENERIC. List of files: /freebsd-12.1/sys/arm/conf/RPI2

10912ba8 - RPI2: Add support for PLATFORM_SMP so we can later add it to GENERIC.

Thu, 29 Sep 2016 06:54:02 +0000

RPI2: Add support for PLATFORM_SMP so we can later add it to GENERIC.Reviewed by: andrewDifferential Revision: https://reviews.freebsd.org/D8063 List of files: /freebsd-12.1/sys/arm/conf/RPI2

3a86bcdd - Remove HZ= from all armv6 configs, put HZ=1000 in std.armv6.

Sat, 09 Jul 2016 21:14:59 +0000

Remove HZ= from all armv6 configs, put HZ=1000 in std.armv6.All armv6 processors are plenty fast enough for HZ=1000.No changes are made for older arm systems, because some chips are a bitwimpy for 1000 while others do fine, so it has to be set on a per-configbasis. List of files: /freebsd-12.1/sys/arm/conf/RPI2

7651aa60 - Consolidate debugging options from all arm kernel configs to std.arm[v6].

Sat, 09 Jul 2016 20:42:57 +0000

Consolidate debugging options from all arm kernel configs to std.arm[v6]. List of files: /freebsd-12.1/sys/arm/conf/RPI2

59c3cb81 - Rename ARM_INTRNG and MIPS_INTRNG to INTRNG. This will help with machine

Fri, 15 Apr 2016 16:05:41 +0000

Rename ARM_INTRNG and MIPS_INTRNG to INTRNG. This will help with machineindependent code that needs to know about INTRNG such as PCI drivers.Obtained from: ABT Systems LtdSponsored by: The FreeBSD Foundation List of files: /freebsd-12.1/sys/arm/conf/RPI2

120b6fc9 - Implement bcm2836 interrupt controller for INTRNG and enable it

Tue, 05 Apr 2016 13:41:51 +0000

Implement bcm2836 interrupt controller for INTRNG and enable iton RPI2 by default.Differential Revision: https://reviews.freebsd.org/D5822 List of files: /freebsd-12.1/sys/arm/conf/RPI2

ed18006c - Create device options for the two common ARM timers.

Sat, 21 Nov 2015 16:23:56 +0000

Create device options for the two common ARM timers.Sponsored by: ABT Systems Ltd List of files: /freebsd-12.1/sys/arm/conf/RPI2

eb6e1a02 - Ensure that all arm kernel configs contain ALT_BREAK_TO_DEBUGGER and not

Mon, 25 May 2015 23:27:13 +0000

Ensure that all arm kernel configs contain ALT_BREAK_TO_DEBUGGER and notBREAK_TO_DEBUGGER if they have a serial console (most do). A burst ofserial line noise (such as unplugging a usb serial adapter) can look likea break and drop a working system into the debugger. The alt break sequence(~^B) works fine on both serial and non-serial consoles. List of files: /freebsd-12.1/sys/arm/conf/RPI2

962940ce - Add the SMP support for Raspberry Pi 2 (BCM2836).

Thu, 07 May 2015 22:11:44 +0000

Add the SMP support for Raspberry Pi 2 (BCM2836).Tested with the build of some ports and a buildworld.Submitted by: Daisuke Aoyama List of files: /freebsd-12.1/sys/arm/conf/RPI2

d667b90d - Clean up the ARM kernel configs to use 'include"file"'.

Thu, 07 May 2015 12:38:23 +0000

Clean up the ARM kernel configs to use 'include"file"'. List of files: /freebsd-12.1/sys/arm/conf/RPI2

5c1bbeb7 - Move the first batch of common armv6 options to std.armv6.

Tue, 05 May 2015 17:59:02 +0000

Move the first batch of common armv6 options to std.armv6. List of files: /freebsd-12.1/sys/arm/conf/RPI2

65c3de4e - Create std.arm and std.armv6 config files and include the right one from

Tue, 05 May 2015 16:09:25 +0000

Create std.arm and std.armv6 config files and include the right one fromeach of the existing kernel configs. This gives a place to put configthat applies to the entire arch.Add the ARM_NEW_PMAP option to std.armv6. This is working well in earlytesting and it's time for wide exposure, but it's still nice to be ableto fall back to the old implementation for testing when a problem comesalong. Eventually the option and the old implementation will go away.The opportunity now exists to move a whole lot of boilerplate from all thearm kernel config files into std.arm*, but that's a commit for another day. List of files: /freebsd-12.1/sys/arm/conf/RPI2